Text in Afrikaans / Psychology / D.Litt. et Phil (Psychology)

Multi functional health monitoring wearable devices are quite prominent these days. Usually these devices are battery-operated and consequently are limited by their battery life (from few hours to a few weeks depending on the application). Of late, it was realized that these devices, which are currently being operated at fixed voltage and frequency, are capable of operating at multiple voltages and frequencies. By switching these voltages and frequencies to lower values based upon power requirements, these devices can achieve tremendous benefits in the form of energy savings. Dynamic Voltage and Frequency Scaling (DVFS) techniques have proven to be handy in this situation for an efficient trade-off between energy and timely behavior. Within imec, wearable devices make use of the indigenously developed MUSEIC v2 (Multi Sensor Integrated circuit version 2.0). This system is optimized for efficient and accurate collection, processing, and transfer of data from multiple (health) sensors. MUSEIC v2 has limited means in controlling the voltage and frequency dynamically. In this thesis we explore how traditional DVFS techniques can be applied to the MUSEIC v2. Experiments were conducted to find out the optimum power modes to efficiently operate and also to scale up-down the supply voltage and frequency. Considering the overhead caused when switching voltage and frequency, transition analysis was also done. Real-time and non real-time benchmarks were implemented based on these techniques and their performance results were obtained and analyzed. In this process, several state of the art scheduling algorithms and scaling techniques were reviewed in identifying a suitable technique. Using our proposed scaling technique implementation, we have achieved 86.95% power reduction in average, in contrast to the conventional way of the MUSEIC v2 chip’s processor operating at a fixed voltage and frequency. Techniques that include light sleep and deep sleep mode were also studied and implemented, which tested the system’s capability in accommodating Dynamic Power Management (DPM) techniques that can achieve greater benefits. A novel approach for implementing the deep sleep mechanism was also proposed and found that it can obtain up to 71.54% power savings, when compared to a traditional way of executing deep sleep mode. / Nuförtiden så har multifunktionella bärbara hälsoenheter fått en betydande roll. Dessa enheter drivs vanligtvis av batterier och är därför begränsade av batteritiden (från ett par timmar till ett par veckor beroende på tillämpningen). På senaste tiden har det framkommit att dessa enheter som används vid en fast spänning och frekvens kan användas vid flera spänningar och frekvenser. Genom att byta till lägre spänning och frekvens på grund av effektbehov så kan enheterna få enorma fördelar när det kommer till energibesparing. Dynamisk skalning av spänning och frekvens-tekniker (såkallad Dynamic Voltage and Frequency Scaling, DVFS) har visat sig vara användbara i detta sammanhang för en effektiv avvägning mellan energi och beteende. Hos Imec så använder sig bärbara enheter av den internt utvecklade MUSEIC v2 (Multi Sensor Integrated circuit version 2.0). Systemet är optimerat för effektiv och korrekt insamling, bearbetning och överföring av data från flera (hälso) sensorer. MUSEIC v2 har begränsad möjlighet att styra spänningen och frekvensen dynamiskt. I detta examensarbete undersöker vi hur traditionella DVFS-tekniker kan appliceras på MUSEIC v2. Experiment utfördes för att ta reda på de optimala effektlägena och för att effektivt kunna styra och även skala upp matningsspänningen och frekvensen. Eftersom att ”overhead” skapades vid växling av spänning och frekvens gjordes också en övergångsanalys. Realtidsoch icke-realtidskalkyler genomfördes baserat på dessa tekniker och resultaten sammanställdes och analyserades. I denna process granskades flera toppmoderna schemaläggningsalgoritmer och skalningstekniker för att hitta en lämplig teknik. Genom att använda vår föreslagna skalningsteknikimplementering har vi uppnått 86,95% effektreduktion i jämförelse med det konventionella sättet att MUSEIC v2-chipets processor arbetar med en fast spänning och frekvens. Tekniker som inkluderar lätt sömn och djupt sömnläge studerades och implementerades, vilket testade systemets förmåga att tillgodose DPM-tekniker (Dynamic Power Management) som kan uppnå ännu större fördelar. En ny metod för att genomföra den djupa sömnmekanismen föreslogs också och enligt erhållna resultat så kan den ge upp till 71,54% lägre energiförbrukning jämfört med det traditionella sättet att implementera djupt sömnläge.

This diploma thesis is focused on the evaluation of six selected zoonoses with the occurrence in South Bohemia (campylobacteriosis, salmonellosis, listeriosis, tick-borne meningoencephalitis, Lyme borreliosis, tularemia) between the years 2003-2013. Campylobacteriosis and salmonellosis were evaluated the most common zoonoses in the South Bohemian Region during the monitored period. Their common feature is the alimentary transmission. Between 2003 to 2008 salmonellosis recorded the highest number of reported cases, on the contrary, campylobacteriosis has reported the highest number of occurrences since 2008. District of Czech Budweis showed the highest incidence of both zoonoses during the monitored period (4,139 cases of salmonellosis and 4,924 cases of campylobacteriosis). Another but not less important zoonotic is tick-borne meningoencephalitis, which incidence had the highest number in South Bohemian Region of all the regions of Czech Republic. The second part of the thesis is based on questionnaire studies focused on awareness of zoonoses and the issue of resistance and overuse of antibiotics. In total 479 questionnaires were evaluated. The survey findings may be equally described as interesting and positive, since the respondents had considerable awareness of the issue of antibiotic resistance.

Made available in DSpace on 2018-08-01T23:40:37Z (GMT). No. of bitstreams: 1 tese_9076_Dissertacao José Osmar - Configuracoes Identitarias Autarquia Publica.pdf: 1760544 bytes, checksum: a278cecc0eccaaa733fed241ac5e938e (MD5) Previous issue date: 2015-06-30 / Esta dissertação tem por objetivo compreender como as transformações no contexto da defesa sanitária e inspeção agropecuária entre 1996 e 2014 se relacionam com as configurações identitárias do Idaf manifestadas por gestores nesse contexto. Trata-se de uma pesquisa qualitativa que descreve os processos identitários da organização por um olhar interpretativista, pelo entendimento das relações simbólicas que permeiam essa organização, observados em discursos dos sujeitos. Para coleta dos dados foram utilizadas pesquisa documental e entrevistas semiestruturadas individuais. As entrevistas foram realizadas com cinco sujeitos da organização nos meses de setembro e outubro de 2014. O método de análise foi a Análise de Conteúdo (KRIPPENDORFF, 1990) que busca investigar dados textuais através de técnicas que permitam compreendê-los com seus significados, referências, valorações e intenções. Pretendeu-se contribuir, com esse estudo, para a compreensão da identidade organizacional, em uma organização pública, no contexto da defesa sanitária e inspeção agropecuária. Os resultados permitiram identificar o Idaf como único e distinto de outras organizações e como essa identificação está relacionada às transformações do contexto agropecuário.

Magister Legum - LLM (Mercantile and Labour Law)

Active layer morphology of polymer-based solar cells plays an important role in improving power conversion efficiency (PCE). In this thesis, the focus is to improve the device efficiency of polymer-based solar cells. In the first objective, active layer morphology of polymer-solar cells was optimized though a novel solvent annealing technique. The second objective was to explore the possibility of replacing the highly sensitive aluminum cathode layer with a low-cost and stable alternative, copper metal. Large scale manufacturing of these solar cells is also explored using roll-to-roll printing techniques. Poly (3-hexylthiophene) (P3HT) and phenyl-C61-butyric acid methyl (PCBM) were used as the active layer blend for fabricating the solar cell devices using bulk heterojunction (BHJ), which is a blend of a donor polymer and an acceptor material. Blends of the donor polymer, P3HT and acceptor, PCBM were cast using spin coating and the resulting active layers were solvent annealed with dichlorobenzene in an inert atmosphere. Solvent annealed devices showed improved morphology with nano-phase segregation revealed by atomic force microscopy (AFM) analysis. The roughness of the active layer was found to be 6.5 nm. The nano-phase segregation was attributed to PCBM clusters and P3HT domains being arranged under the solvent annealing conditions. These test devices showed PCE up to 9.2 % with current density of 32.32 mA/cm2, which is the highest PCE reported to date for a P3HT-PCBM based system. Copper was deposited instead of the traditional aluminum for device fabrication. We were able to achieve similar PCEs with copper-based devices. Conductivity measurements were done on thermally deposited copper films using the two-probe method. Further, for these two configurations, PCE and other photovoltaic parameters were compared. Finally, we studied new techniques of large scale fabrication such as ultrasonic spray coating, screen-printing, and intense pulse light sintering, using the facilities at the Conn Center for Renewable Energy Research at the University of Louisville. In this study, prototype devices were fabricated on flexible ITO coated plastics. Sintering greatly improved the conductivity of the copper nano-ink cathode layer. We will explore this technique’s application to large-scale fabrication of solar cell devices in the future work.

<p>Proučavane su koroziona postojanost i tendencija lepljenja različitih<br />materijala u kontaktu sa tečnom Al&ndash;Si&ndash;Cu legurom. Ispitivanjem su<br />obuhvaćeni čelik za rad na toplo, plazma nitrirani čelik i dupleks<br />slojevi sa CrN, TiAlN, TiAlSiN i CrAlN prevlakama, različitog nivoa<br />površinske hrapavosti. Za ispitivanja pomenutih fenomena<br />primenjena je metoda izvlačenja, koja je unapređena kako bi se povećale<br />njena tačnost i verodostojnost simulacije procesa livenja. Korozioni<br />efekti su pojačani tako što su uzorci osim kratkog kontakta sa odlivkom<br />zadržavani i u dužim periodima u kontaktu sa tečnom legurom (5 i 20<br />min). Uprkos opštim stavovima, za ispitivane materijale je<br />ustanovljeno da su sile izvlačenja uzoraka iz Al&ndash;Si&ndash;Cu odlivaka<br />nezavisne od njihovog hemijskog sastava. Uticaj hrapavosti je izražen<br />kod uzoraka sa prevlakama kod kojih pri smanjenju hrapavosti dolazi do<br />povećanja sile izvlačenja. Sve ispitane prevlake su sklone mehaničkom<br />lepljenju Al&ndash;Si&ndash;Cu legure za svoje površine, ali sa aspekta korozije u<br />tečnom metalu značajno prevazilaze performanse čelika i plazma<br />nitriranog sloja. Duži kontakt livene legure sa površinama prevlaka<br />uzrokovao je niže vrednosti sila izvlačenja, što je posledica<br />oksidacije površina prevlaka. Ustanovljeno je da su ispitivane<br />prevlake inertne ka tečnoj leguri aluminijuma. Međutim, dolazi do<br />oksidacije i korozije materijala podloge kroz greške rasta koje su<br />prisutne u prevlakama. Stečena znanja o identifikovanim<br />mehanizmima habanja i propadanja zaštitnih slojeva prevlaka<br />poslužiće daljem razvoju dupleks slojeva namenjenih za zaštitu alata<br />za livenje pod pritiskom.</p> / <p>Corrosion resistance and soldering tendency of different materials in molten<br />Al&ndash;Si&ndash;Cu alloy were studied. Hot-working tool steel, plasma nitrided steel and<br />duplex layers with CrN, TiAlN, TiAlSiN and CrAlN top coatings, which were<br />produced to various degree of surface roughness, were covered by the study.<br />An ejection test was employed for investigation of the concerned phenomena.<br />The ejection test was improved in order to increase its accuracy and the<br />reliability of process simulation. Samples were examined in both short and<br />extended periods of contact (5 and 20 min) with liquid casting. Casting<br />solidification was extended in order to intensify the corrosion effects. Contrary<br />to common findings, it was found that the ejection force of the investigated<br />materials does not depend on their chemical composition. For the coated<br />samples, a pronounced dependence of the ejection force on the surface<br />roughness was found. The ejection force increases with decrease in surface<br />roughness. All investigated coatings are prone to mechanical soldering by Al&ndash;<br />Si&ndash;Cu alloy. Still, their corrosion resistance substantially exceeds the corrosion<br />resistance of steel and plasma nitrided layer. Longer exposure of coated<br />samples to cast alloy induced lower ejection forces, which is a consequence<br />of coatings oxidation. It was found that the investigated coatings are inert to<br />liquid aluminium. However, the underlying material undergoes oxidation and<br />corrosion through coating growth defects. The findings concerning the wear<br />mechanisms of protective layers support further development of duplex layers<br />intended for die casting tools protection.</p>

No description available.

Introducción. El objetivo del presente estudio es determinar si existe correlación entre los conocimientos sobre las consecuencias de la obesidad y el grado de actividad física de las personas. Métodos. Se realizó un estudio transversal analítico durante los años 2013 y 2014. Participaron 215 alumnos de pregrado seleccionados por conveniencia no relacionados a carreras del campo de la salud en una universidad de Lima, Perú. Se evaluó el grado de actividad física utilizando el International Physical Activity Questionnaire (IPAQ) y el nivel de conocimientos sobre consecuencias de la obesidad utilizando la escala Obesity Risk Knowledge-10 (ORK-10). También, se consignó las fuentes de información de donde obtuvieron el conocimiento para responder dicho cuestionario. Resultados. La mediana de edad fue 20 (rango intercuartílico=4) y 63% eran mujeres. De acuerdo al IPAQ, 53,9% realizaban actividad física alta, 35,4%, moderada y 10,7%, leve. Se encontró una correlación muy baja (rs=0,06) entre el puntaje del ORK-10 y la cantidad de equivalentes metabólicos/minuto consumidos por semana, pero no era significativa (p=0,38). Las personas informadas por medios de comunicación y por personal de salud obtuvieron mayores puntajes en el ORK- 10 que quienes se informaron por otras vías (p<0,05). Conclusiones. La correlación entre los conocimientos sobre consecuencias de la obesidad y el grado de actividad física es muy baja. Es necesario utilizar enfoques multidisciplinarios que incluyan todos los determinantes de la realización de actividad física para poder lograr cambios en la conducta de la población.

No description available.