No description available.

No description available.

No description available.

No description available.

No description available.

The development of future electronics depends on the availability of suitable functional materials. Printed electronics, for example, relies on access to highly conductive, inexpensive and printable materials, while strong light absorption and low carrier recombination rates are demanded in photocatalysis industry. Despite all efforts to develop new materials, it still remains a challenge to have all the desirable aspects in a single material. One possible route towards novel functional materials, with improved and unprecedented physical properties, is to form composites of different selected materials. In this work, we report on hydrothermal growth and characterization of graphene/zinc oxide (GR/ZnO) nanocomposites, suited for electronics and photocatalysis application. For conductive purposes, highly Al-doped ZnO nanorods grown on graphene nanoplates (GNPs) prevent the GNPs from agglomerating and promote conductive paths between the GNPs. The effect of the ZnO nanorod morphology and GR dispersity on the nanocomposite conductivity and GR/ZnO nanorod bonding strength were investigated by conductivity measurements and optical spectroscopy. The inspected samples show that growth in high pH solutions promotes a better graphene dispersity, higher doping and enhanced bonding between the GNPs and the ZnO nanorods. Growth in low pH solutions yield samples characterized by a higher conductivity and a reduced number of surface defects. In addition, different GR/ZnO nanocomposites, decorated with plasmonic silver iodide (AgI) nanoparticles, were synthesized and analyzed for solar-driven photocatalysis. The addition of Ag/AgI generates a strong surface plasmon resonance effect involving metallic Ag0, which redshifts the optical absorption maximum into the visible light region enhancing the photocatalytic performance under solar irradiation. A wide range of characterization techniques including, electron microscopy, photoelectron spectroscopy and x-ray diffraction confirm a successful formation of photocatalysts. Our findings show that the novel proposed GR-based nanocomposites can lead to further development of efficient photocatalyst materials with applications in removal of organic pollutants, or for fabrication of large volumes of inexpensive porous conjugated GR-semiconductor composites.

Localized surface plasmon resonance (LSPR) describes the collective oscillation of conductive electrons in noble metal nanostructures, such as gold, silver and copper; or in selected doped semiconductor nanocrystals. Nanoplasmonics is emerging as a useful and versatile platform that combines the intense and highly tunable optical responses derived from LSPR with the intriguing materials properties at the nanoscale, including high specific surface areas, surface and chemical reactivity, binding affinity, and rigidity. LSPRs in plasmonic nanoparticles (NPs) can provide large optical cross-sections, and can lead to a wide variety of subsequent photophysical responses, such as localization of electric (E-)fields, production of plasmonic hot charge carriers, photothermal heating, etc. Plasmonic NPs can also be combined with other molecular or nanoscale systems into plasmonic heterostructures to further harvest the resonant E-field enhancement or to prolong the lifetime of plasmonic charge carriers. In this dissertation, we study the photophysical properties of plasmonic Ag and Au NPs, particularly E-field localization and hot charge carrier production performances; and illustrate how they can be optimized towards plasmonic photocatalysis, development of nano-antimicrobials, and surface-enhanced Raman spectroscopy (SERS) sensing. We demonstrate that with a lipid-coated noble metal nanoparticle (L-NP) model, the E-field localization properties could be optimized through positioning molecular photosensitizers or photocatalysts within a plasmonic “sweet spot”. This factor renders the plasmonic metal NPs efficient nanoantenna for resonant enhancement of the intramolecular transitions as well as the photocatalytic properties of the molecular photocatalysts. The enhanced photoreactivity have been applied to facilitate fuel cell half reactions for the enhancement of light energy conversion efficiencies; as well as to facilitate the release of broad-band bactericidal compounds that enables plasmonic nano-antimicrobials. Localized E-fields in L-NPs also enhance the inelastic scattering from molecules through SERS. This is utilized to obtain molecular-level information on the configuration of sterol-based, alkyne-containing Raman tags in hybrid lipid membranes, which enables spectroscopic sensing and targeted imaging of biomarker-overexpressing cancer cells at the single-cell level. In contrast to the localized E-field, plasmonic charge carrier generation mechanism relies on non-radiative decay pathways of the excited plasmons that lead to production of ballistic charge carriers. The plasmonic hot charge carriers directly participate in chemical redox processes with degrees of controllability over the nature of the charge carrier produced and direction of their transfers. The implementation and optimization of these mechanisms are explored, and the significances of some relevant applications are discussed.

Advanced oxidation of organic pollutants with TiO2 photocatalysts is limited due to the wide bandgap of TiO2, 3.2 eV, which requires ultraviolet (UV) radiation. When nanosized TiO2 is modified by carbon doping, charge recombination is inhibited and the bandgap is narrowed, allowing for efficient photodegradation under visible light. Here, we propose a flame spray pyrolysis (FSP) technique to create TiO2. The facile process of FSP has been successful in preparing highly crystalline TiO2 nanoparticles. Using the same procedure to deposit TiO2 onto biochar, the photocatalyst was doped by the carbonaceous material. The morphology, crystalline and electronic structure of the FSP TiO2 and TiO2-decorated biochar (TiO2-BC) were characterized by SEM, XRD, TGA, DLS, and diffuse reflectance UV-vis spectroscopy. Photocatalytic performance of TiO2 and TiO2-BC was investigated for model organic contaminants in an aqueous solution under UV and visible light, which will be compared to that of Degussa P25 TiO2 as a control.

Yes / In this study, we prepared chitosan (Cs_P) nanofibers (NFs) membrane by electrospinning. The Cs_P NFs membrane was then chemically functionalized (CsF) by a novel stepwise chemical process. The CsF NFs membrane was electrospray with TiO2 nanoparticles (NPs) to prepare the CsF_Coa NFs membrane. A second NFs membrane with embedded TiO2 NPs (Cs_Co) was also prepared by electrospinning. The TiO2 NPs, Cs_P, CsF s, CsF_Coa NFs, and Cs_Co NFs membranes were analyzed by standard spectroscopic, microscopic, X-ray, and thermal methods. Fourier transform infrared (FTIR) analysis confirmed the incorporation of the new functional group into the Cs structure. X-ray photoelectron spectroscopy (XPS) data confirmed the FTIR results and the fabrication of the CsF NFs membrane. Scanning electron microscope (SEM) micrographs showed a smooth morphology for the Cs_P NFs membrane and a denser morphology for the CsF NFs membrane (NFs swelled with functionalization). The SEM micrographs also showed a dense cloud of TiO2 NPs on the surface of the Cs_Coa NFs membrane. Transmission electron microscope (TEM) showed that the particle size of TiO2 NPs varied between 20 and 35 nm and tended to be spherical. The X-ray diffraction (XRD) pattern confirmed the existence of the anatase phase of the TiO2 NPs. The presence of TiO2 in the Cs_Coa and Cs_Co NFs membranes was also confirmed by energy-dispersive x-ray spectroscopy (EDX). Surface profilometry confirmed an increase in the surface roughness of the CsF and Cs_Coa NFs membranes. Brunauer–Emmett–Teller (BET) analysis revealed that the isotherms and hystereses for all NFs membranes were of the IV and H3 types, respectively, corresponding to mesopores and slit pores. The higher photocatalytic activity of the Cs_Coa NFs membrane (89%) compared to the Cs_Co NFs membrane (40%) was attributed to a balance between the short band gap, high surface roughness, and lower surface area.

This thesis describes the study of a series of multimetallic supramolecules containing varied metals and ligands, synthesized by a building block method and characterized by mass spectrometry, electronic absorption spectroscopy, and electrochemistry. Incorporating different functional units into complex systems allowed these multimetallic supramolecules to perform various light activated tasks including DNA cleavage and hydrogen generation from water. The complex [({(bpy)₂Os(dpp)}₂Ru)₂(dpq)](PF₆)₁₂ and [{(bpy)₂M(dpp)}₂Ru(BL)PtCl₂](PF₆)₆ were synthesized (M = Os^II or Ru^II; BL = dpp or dpq; bpy = 2,2^'-bipyridine, dpp = 2,3-bis(2-pyridyl)pyrazine, dpq = 2,3-bis(2-pyridyl)quinoxaline). The building blocks displayed varied electrochemical properties upon complexation. The bridging ligands dpp and dpq display their reduction potentials shifted to less negative values when they changed from monochelating to bischelating. The electronic absorption spectra of the multimetallic systems displayed transitions of each contributing chromophore, with overlapping metal to ligand charge transfer (MLCT) transitions in visible region of spectrum. Spectroelectrochemistry revealed the nature of MLCTs and helped to identify fingerprint features of complex supramolecules. Photophysical measurements include emission spectroscopy with quantum yield measurements and emission lifetime measurements. Photophysical data provided detailed information to aid in developing an understanding of excited state properties of these complexes. Supported by the electrochemical data and spectroelectrochemistry, the hexametallic complex was suggested to have a HOMO localizing in the peripheral Os and a LUMO localizing in the central dpq, separating by a Ru energy barrier. This research systematically investigated photophysical properties of some building blocks and the mixed-metal, mixed-ligand supramolecules constructed by a variety of building blocks coupling light absorbing subunits to a reactive Pt metal center. Preliminary studies suggested [{(bpy)₂Ru(dpp)}₂Ru(dpq)PtCl₂](PF₆)₆ was a photocatalyst for H2 production from water in the presence of a sacrificial electron donor. The complex [{(bpy)₂Ru(dpp)}₂Ru(dpq)PtCl₂](PF₆)₆ had been studied for its catalytic ability in generating hydrogen and was found to have 34 product turnovers after 3 h photolysis. Photolysis and gel electrophoresis revealed that the tetrametallic complexes were able to bind to and then photocleave DNA through an oxygen mediated mechanism. The independence of ionic strength variation when [{(bpy)₂Ru(dpp)}₂Ru(dpp)PtCl₂](PF₆)₆ interacted with DNA, suggested the covalent interaction nature of the complex. These results suggest future work on understanding the excited state properties of supramolecular complexes is suggested. The designs of future photocatalysts for hydrogen production from water and anticancer photodynamic therapy drugs are also proposed. / Ph. D.