Carbon nanotubes (CNTs) have become a popular area of materials science research due to their outstanding material properties coupled with their small size. CNTs are expected to be included in a wide variety of applications and devices in the near future. Among these devices which are nearing mass production are electrochemical double layer (ECDL) supercapacitors. The current methods to produce CNTs are numerous, with each synthesis variable resulting in changes in the physical properties of the CNT. A wide array of studies have focused on the effects of specific synthesis conditions. This research expands on earlier work done using bulk nickel catalyst, alumina supported iron catalyst, and standard chemical vapor deposition (CVD) synthesis methods. This work also investigates the effect of an applied voltage to the CVD chamber during synthesis on the physical nature of the CNTs produced. In addition, the work analyzes a novel nickel catalyst system, and the CNTs produced using this catalyst. The results of the effects of synthesis conditions on resultant CNTs are included. Additionally, CNT based ECDL supercapacitors were manufactured and tested. Scanning electron microscope (SEM) analysis reveals that catalyst choice, catalyst thickness, synthesis temperature, and applied voltage have different results on CNT dimensions. Nanotube diameter distribution and average diameter data demonstrate the effect of each synthesis condition. Additionally, the concept of an alignment parameter is introduced in order to quantify the effect of an electric field on CNT alignment. CNT based ECDL supercapacitors testing reveals that CNTs work well as an active material when a higher purity is achieved. The molarity of the electrolyte also has an effect on the performance of CNT based ECDL supercapacitors. On the basis of this research, we conclude that CNT physical dimensions can be moderately controlled based on the choice of synthesis conditions. Also, the novel nickel catalyst system investigated in this research has potential to produce bulk quantities of CNT under specific conditions. Finally, purified CNTs are recommended as a suitable active material for ECDL supercapacitors.

Thin film nanostructures may be defined as assemblies, arrays, or randomly distributed nanoparticles, nanowires, or nanotubes, which together form a layer of materials supported on a substrate surface. Because such nanostructures are supported on a substrate surface, their potential applications cover a wide area in optical, magnetic, electrochemical, electromagnetic, and optoelectronic devices. The focus of the present thesis is the development of methodologies to grow certain thin film nanostructures of some transition metal oxides (TMOs), including copper oxides and LixCoO2, through CVD, sol-gel, and electromagnetic radiation-mediated approaches. The work towards this objective can be divided into three parts: first, the design, synthesis, and systematic identification of novel metalorganic precursors of copper (monometallic) and Li and Co (bimetallic); second, the growth of nanostructured oxides thin films using these precursors; and third, the application of electromagnetic radiation to control or tailor the growth of as grown nanostructures. The underlying growth mechanisms substantiated by appropriate evidence have been put forward, wherever found relevant and intriguing. It may be added that the principal objective of the work reported here has been to explore the several ideas noted above and examine possibilities, rather than to study any specific one of them in significant detail. It is hoped earnestly that this has been accomplished to a reasonable extent. Chapter 1 reviews briefly the reports available in the literature on three specific methods of growing thin films nanostructures, namely chemical vapour deposition, sol-gel processing and light-induced approach. The objective of this chapter has been to provide the background of the work done in the thesis, and is substantiated with a number of illustrative examples. Some of the fundamental concepts involved, viz., plasmons and excitons, have been defined with illustration wherever found relevant in the context of the work. Chapter 2 describes the various techniques used for synthesis and characterisation of the metalorganic complexes as well as of the thin films. This chapters covers mostly experimental details, with brief descriptions of the working principles of the analytical procedures adopted, namely, infrared spectroscopy, mass spectroscopy, elemental analysis, and thermal analysis for characterisation of the metalorganic complexes. This is followed by a similarly brief account of techniques employed to characterize the thin films prepared in this work, viz., glancing incidence X-ray diffraction (GIXRD), field-emission scanning electron microscopy (FESEM), atomic force microscopy (AFM), electrostatic force microscopy (EFM), transmission electron microscopy (TEM), glancing incidence infra-red spectroscopy (GIIR) and, UV-visible spectroscopy. The metalorganic chemical vapour deposition (MOCVD) systems built in house and used for growth of films are described in detail. The topics in the different sections of the chapter are accompanied by pertinent diagrams. Chapter 3 deals with the design, synthesis and characterisation of novel polynuclear complexes of copper and cobalt. Keeping in mind the various advantages such as low toxicity, ease of synthesis, non-pyrophoricity, and low temperature volatility, of environmentally benign complexes based on biologically compatible such as triethanolamine, diethanolamine, the objective has been to synthesize complexes containing triethanolamine and diethanolamine of transition metals such as cobalt and copper, and to investigate their applicability in MOCVD processes as a novel class of precursors. With the notion of ‘better’ and efficient design of precursors, an attempt has been made, through a semi-empirical modeling, to understand the correlation between volatility and various intrinsic molecular parameters such as lattice energy, vibrational-rotational energy, and internal symmetry. Chapter 4 discusses the growth of nanoporous Cu4O3-C composite films through the MOCVD process employing Cu4(deaH)(dea)(oAc)5.(CH3)2CO as the precursor. The various characteristic aspects of as-grown films, such as their crystallinity, morphology, and composition have been covered elaborately in various sections of this chapter. The chapter describes the efficient guiding and confining of light exploiting the photonic band gap of these nanoporous films, which indicates the potential usefulness of these and similar films as optical waveguides. A model described in the literature on absorbing photonic crystals, wherein a periodically modulated absorption entails an inevitable spatial modulation of dispersion, i.e., of the index contrast to open a photonic band gap, has been used to calculate the indices of refraction of one of these nanoporous films. The chapter also reports briefly the preliminary electrochemical investigations carried out on a typical film, examining the notion of its application as the anode in a Li-ion rechargeable battery. Chapter 5 describes the synthesis of nanocrystalline LixCoO2 films by the sol-gel method. Reports available in literature indicate that the various phases of LixCoO2 are extremely sensitive to processing temperature, making it difficult to control dimensionality of a given phase using temperature as one of process parameters. We have investigated the possibility of using incoherent light to tailor the particle size/shape of this material. The as-grown and irradiated films were characterised by X-ray diffraction, and by microscopic and spectroscopic techniques.Optical spectroscopy was carried out in order to gain insight into the physico-chemical mechanism involved in such structural and morphological transformation. Chapter 6 deals with the synthesis of self-assembled nanostructures from the pre-synthesized nanocrystals building blocks, through optical means of exciton formation and dissociation. It has been demonstrated that, upon prolonged exposure to (incoherent) ultraviolet-visible radiation, LixCoO2 nanocrystals self-assemble into acicular architectures, through intermediate excitation of excitons. Furthermore, it has been shown that such self-assembly occurs in nanocrystals, which are initially anchored to the substrate surface such as that of fused quartz. This new type of process for the self-assembly of nanocrystals, which is driven by light has been investigated by available microscopic and spectroscopic techniques. Chapter 7 describes the stabilisation of chemically reactive metallic lithium in a carbonaceous nanostructure, viz., a carbon nanotube, achieved through the MOCVD process involving a lithium-alkyl moiety. This moiety is formed in situ during deposition through partial decomposition of a metalorganic precursor synthesized in house, which contains both lithium and cobalt. It is surmised that the stabilization of metallic Li in the nanostructure in situ occurs through the partial decomposition of the metalorganic precursor. Quantitative X-ray photoelectron spectroscopy carried out on such a film reveals that as much as 33.4% metallic lithium is trapped in carbon. Lastly, Chapter 8 briefly highlights the outlook for further investigations suggested by the work undertaken for this thesis. Novel precursors derived from biologically compatible ligands can open up possibility of growing new type of micro/nano-structures, and of unusual phases in the CVD grown films. Furthermore, it is proposed that the novel method of growth and alignment of nanocrystals through irradiation with incoherent light, employed for the specific material LixCoO2, may be employed for various other metallic and semiconducting materials.

Today there is a great deal of interest in the development of gas sensors for applications like air pollution monitoring, indoor environment control, detection of harmful gases in mines etc. Based on different sensing principles, a large variety of sensors such as semiconductor gas sensors, thermoelectric gas sensors, optical sensors and thermal conductivity sensors have been developed. The present thesis reports a detailed account of a novel method followed for the design and development of a thermoelectric gas sensor for sensing of Volatile Organic Compounds. Thermoelectric effect is one of the highly reliable and important working principles that is widely being put into practical applications. The thermoelectric property of semiconducting tin oxide film has been utilized in the sensor that has been developed. The thermoelectric property of semiconducting tin oxide film has been utilized in the sensor. The deposition parameters for sputtering of tin oxide film have been optimized to obtain a high seebeck coefficient. A test set-up to characterize the deposited films for their thermoelectric property has been designed and developed. A novel method of increasing the seebeck coefficient of tin oxide films has been successfully implemented. Thin films of chromium, copper and silver were used for this purpose. Deposition of the semiconducting oxide on strips of metal films has led to a noticeable increase in the seebeck coefficient of the oxide film without significantly affecting its thermal conductivity. The next part of our work involved development of a gas sensor using this thermoelectric film. These sensors were further tested for their response to volatile organic compounds. The sensor showed significant sensitivity to the test gases at relatively low temperatures. In addition to this, the developed sensor is also selective to acetone gas.

Ce travail concerne l'élaboration in situ, par CVD catalytique, de couches de nanotubes et filaments de carbone pour leur intégration en tant que couches émissives d'électrons dans les écrans plats à émission de champ. <br />Les paramètres clés, avantages et limitations de plusieurs techniques de préparation et d'intégration de nano particules catalytiques ont d'abord été analysés : le démouillage d'un film continu, la gravure humide post-démouillage, le dépôt de nano agrégats et la lithographie électronique. Trois techniques de croissance de couches carbonées ont ensuite été étudiées dans le même réacteur : la CVD thermique simple, la CVD en présence d'un champ électrique et la CVD avec assistance plasma à partir d'une source de carbone solide. Enfin, les propriétés émissives des diverses couches carbonées élaborées ont été mesurées, en mode diode pour les couches synthétisées sur échantillon plan et en mode triode pour les couches intégrées sur structure cathodique d'écran.<br />L'analyse de ces résultats a permis de clarifier les liens entre paramètres technologiques d'élaboration, morphologie et performances émissives des films de nanotubes et filaments de carbone.

Στόχος της διδακτορικής αυτής διατριβής ήταν η ανάπτυξη μιας μεθόδου παραγωγής νανοσωλήνων άνθρακα η οποία στηρίζεται στη χημική απόθεση ατμών, χρησιμοποιώντας ως πηγή του άνθρακα ενώσεις σε υγρή μορφή, όπως οι αλκοόλες. Επιπρόσθετα μελετήθηκαν διάφορες παράμετροι της πειραματικής διαδικασίας (πηγή άνθρακα, θερμοκρασία απόθεσης, είδος και συγκέντρωση μετάλλου και υποστρώματος, παρουσία υδρογόνου κ.ά), τόσο ως προς την επίδρασή τους στο ρυθμό εξέλιξης της διεργασίας, όσο και ως προς το είδος των παραγόμενων προϊόντων, με σκοπό τη στοχευμένη παραγωγή νανοσωλήνων άνθρακα με συγκεκριμένες ιδιότητες. Η κύρια πειραματική διάταξη αποτελούνταν από έναν θερμοβαρομετρικό αντιδραστήρα, ο οποίος επέτρεπε τη συνεχή μέτρηση των μεταβολών του βάρους του δείγματος σε συνάρτηση με το χρόνο, ενώ και φασματογράφος μάζας ήταν συνδεδεμένος στην έξοδο του αντιδραστήρα για να μελετηθεί η αέρια φάση των αντιδράσεων. Τα προϊόντα προκειμένου να πιστοποιηθούν ως προς το είδος των νανοσωλήνων που παρήχθησαν, χαρακτηρίστηκαν με τη βοήθεια ηλεκτρονικής μικροσκοπίας σάρωσης (SEM) και διερχόμενης δέσμης (TEM), καθώς και με φασματοσκοπία Raman και θερμοσταθμική ανάλυση (TGA). Τα αποτελέσματα των πειραμάτων οδήγησαν στο συμπεράσμα πως οι ατμοί της αιθανόλης είναι καλύτερη πηγή άνθρακα σε σύγκριση με της μεθανόλης, οδηγώντας μάλιστα στη παραγωγή μίγματος πολυφλοιϊκών και μονοφλοιϊκών νανοσωλήνων άνθρακα, με καθαρότητες που ξεπερνούσαν το 90%. Επιτακτική αποδείχθηκε η παρουσία του μετάλλου, το οποίο και αποτελεί το κέντρο πυρημοποιήσης για την ανάπτυξη των νανοσωλήνων, ενώ καθοριστική είναι και η χρήση υποστρώματος προκειμένου ο άνθρακας να αποτεθεί με τη μορφή αυτή. Επιπρόσθετα, η παρουσία του υδρογόνου αύξησε σημαντικά το ποσοστό του άνθρακα που αποτέθηκε οδηγώντας μάλιστα στο σχηματισμό μεταλλικών μονοφλοικών νανοσωλήνων άνθρακα πολύ μικρής διαμέτρου, η οποία υπολογίστηκε ίση με 0.45nm. / The main goal of this research was the development of a new method for the production of carbon nanotubes, based on chemical vapor deposition (CVD), which employs a liquid carbon source. In addition, a detailed investigation of the effect of several parameters (carbon source, deposition temperature, kind and metal concentration and support, hydrogen addition e.t.c.) on both the process and the final carbon product was carried out. For this purpose, a CVD experimental apparatus was developed, which uses vapors of liquid precursors and allows the continuously recording of sample weight changes in correlation with time. In some cases, a mass spectrometer was used as a way to determine the kind of processes that take place in the gas phase during carbon deposition. The solid product was characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy and thermogravimetric analysis (TGA). The experimental results led to the conclusion that ethanol vapors are preferable because they lead to higher yield of both multi-wall and single-wall carbon nanotubes. Also, it was proved that the presence of a metal catalyst and support is necessary, because the first one is the active site of carbon nanotubes formation, and the second leads to the deposition of carbon in this form. Additionally, it was proved that the use of hydrogen in the gas mixture of the process is very important, as a way to reduce catalyst, leading to the formation of metalic single-wall carbon nanotubes of very small diameter (0.45nm).

L'objectif de ce travail est d'élaborer des matériaux composites modèles nanotubes de carbone/polymères permettant de tirer profit des propriétés des nanotubes de carbone à l'échelle macroscopique. L'obtention de tels matériaux nécessitant une fonctionnalisation homogène entre les nanotubes de carbone et les polymères, les nanotubes de carbone utilisés doivent être individuels et de même réactivité chimique, donc de même diamètre. Ainsi, ils doivent être synthétisés par CVD par des nanoparticules catalytiques monodisperses et supportées. Dans la première partie, nous avons élaboré une nouvelle méthode générique de synthèse de nanoparticules d'oxydes métalliques supportées. Nous avons principalement détaillé la synthèse de nanoparticules de Fe2O3 dont la distribution en taille est de 1.1 ± 0.3 nm. Dans la deuxième partie, après avoir étudié la stabilité thermique de ces nanoparticules, nous les avons utilisées pour catalyser la croissance des nanotubes de carbone monofeuillets individuels par CVD. La caractérisation des nanotubes obtenus par Raman indique une distribution en diamètre exceptionnellement étroite de 1.27 ± 0.15 nm. Dans la troisième partie, nous avons tout d'abord étudié la mise en solution des nanotubes de carbone par fonctionnalisation non covalente avec un polymère hydrosoluble le POE portant un motif pyrène en bout de chaîne et mis en évidence un phénomène de déplétion qui limite la solubilisation des nanotubes. Nous avons ensuite élaboré des matériaux composites nanotubes de carbone/rrP3HT par fonctionnalisation covalente et non covalente et nous avons étudié l'efficacité de séparation de charge dans les deux cas de fonctionnalisations.

Parmi les différentes cellules photovoltaïques existantes, les technologies à base de CIGS représentent aujourd'hui une alternative sérieuse à celles basées sur le silicium. De même, les technologies organiques émergent en vue d'applications sur le marché de la faible puissance. Afin d'être parfaitement concurrentielle, ces cellules doivent s'affranchir au maximum de la présence d'indium (surcoût) au sein de leurs structures (TCO, couche absorbante), ou de matériaux toxiques comme le CdS utilisé en tant que couche tampon. Les chalcogénures de zinc tels que le Zn1-xMgxO ou le ZnOzS1-z peuvent être employées à la place du CdS grâce à leurs propriétés semi-conductrices. En dopant le Zn1-xMgxO par un ou plusieurs atomes métalliques trivalents, on peut également créer des électrodes transparentes (TCO) pouvant substituer les électrodes traditionnelles à base d'indium (ITO). Les couches minces synthétisées au cours de ce travail ont été réalisées par spray-CVD, une technique de dépôt hybride et innovante utilisant un mode de chauffage radiatif. Les améliorations apportées au réacteur expérimental et les avantages qu'elles dégagent en font une alternative crédible aux techniques traditionnelles. Les couches de Zn1-xMgxO ainsi synthétisées exhibent de très bonnes propriétés, dont une énergie de gap facilement ajustable, une forte mobilité électronique et une très bonne transparence. De même, des couches de ZnS ont été réalisées par l'usage d'un précurseur original, permettant de s'affranchir du ZnCl2 (corrosif) couramment utilisé en spray pyrolyse. Les différents TCO étudiés ont montré de faibles résistivités (10-3 Ω.cm) et ont pu être testés dans des cellules solaires organiques en structures inverses.

Gegenstand dieser Arbeit ist die Modifizierung von Oberflächen durch die Abscheidung alternierender Schichtsysteme auf Kohlenstofffasern und die Abscheidung von Aluminiumoxid auf organischen Membranen. Im ersten Kapitel wird das Vorgehen zur Abscheidung von organischen und anorganischen Schichten auf Kohlenstofffasern mittels der Atomlagenabscheidung und der oberflächeninitiierten Gasphasenabscheidung betrachtet. Dabei wird als Erstes auf die Abscheidung von Einzellagen und deren Optimierung eingegangen sowie im Anschluss auf die Übertragung dieser Parameter auf die Abscheidung von alternierenden Multilagensystemen. Mittels elektronenmikroskopischen-Untersuchungen, Rasterelektronenmikroskopie und energiedispersiver Röntgenspektroskopie, wird die Abscheidung der Materialien untersucht. Weiterhin können mit Hilfe von thermogravimetrischen Analysen die Oxidationsbeständigkeit der beschichteten Kohlenstofffasern sowie die einzelnen Schichtdicken bestimmt werden. Im zweiten Kapitel wird auf die Beschichtung von organischen Membranen eingegangen. Das Hauptaugenmerk liegt dabei auf der Beschichtung von nicht-hierarchisch und hierarchisch strukturierten Membranen mit Aluminiumoxid. Dafür werden die Atomlagenabscheidung und die Grenzflächenreaktion der Gasphase mit der im Feststoff gebundenen Flüssigphase angewendet. Unter Anwendung dieser beiden Verfahren ist es gelungen, dünne und gleichmäßige Schichten auf den Membranen abzuscheiden. Die Charakterisierung erfolgte mittels Rasterelektronenmikroskopie und energiedispersiver Röntgenspektroskopie. Zum Schluss wurden Filtrationsexperimente zum Vergleich der Stabilität und Durchflussraten der beschichteten mit den unbeschichteten Membranen durchgeführt.

Carbon nanotubes (CNT) and graphene have been one of the noticeable research areas in science and technology. In recent years, the assembly of these carbon nanostructures is one of the most interesting topic to the scientific world due to its variety of applications from nano to macroscale. These bulk nanostructures to be applicable in shock absorbers, batteries, sensors, photodetectors, actuators, solar cells, fuel cells etc. The present work is motivated to study the detailed compressive behavior of three dimensional cellular assemblies of CNT and graphene. The CNT foams are synthesized by chemical vapor deposition method. It is interesting to study the compressive behavior of CNT foam in the presence external magnetic field applied perpendicular to CNT axis. The peak stress and energy absorption capability of CNT foam enhances by four and nearly two times in the presence of magnetic field as compared to the absence of the magnetic field. In the absence of magnetic field the deformation of CNT foam is obtained elastic, plateau and densification regions. Further CNT foam is loaded with iron oxide nanoparticles of diameter is ~ 40nm on the surface and detailed study of the compressive behavior of the foam by varying iron nanoparticles concentration. The peak stress and energy absorption capability of CNT foam initially decreases with increasing the intensity of the magnetic field, further increases the intensity of the magnetic field the maximum stress and energy absorption capability increases which is due to magnetic CNT and particles align in the direction of the magnetic field. CNT surfaces were further modified by fluid of different viscosities. The mechanical behavior of CNT foam filled with fluids of varying viscosities like 100%, 95% and 90% glycerol and silicone oil are 612, 237, 109 and 279 mPa-s respectively. The mechanical behavior of CNT foam depends on both the intensity of magnetic field and fluid viscosity. The non linear relation between peak stress of CNT and magnetic field intensity is σp(B, η) = σ0 ± α(B-B0) where σ0 is the peak stress at B = B0 , η is the fluid viscosity, parameter α depends on properties of the MR fluid and B0 is an optimum magnetic field for which peak stress is maximum or minimum depending on the fluid viscosity. Graphene is assembled into a three dimensional structure called graphene foam. The graphene foam is infiltrated with polymer and study the detailed compressive behavior of graphene foam and graphene foam/PDMS at different strains of 20, 40, 60 and 70%. The maximum stress and energy absorption capability of graphene foam/PDMS is six times higher than the graphene foam. Also the graphene foam/PDMS is highly stable and reversible for 100 cycles at strains of 30 and 50%. The mechanical behavior of CNT, graphene foam, CNT/PDMS and graphene foam/PDMS is compared. Among all the foams, graphene foam/PDMS has shown the highest elastic modulus as compared to other foams. This behavior can be attributed to the wrinkles formation during the growth of graphene and a coupling between PDMS and interfacial interactions of graphene foam. Therefore it suggests potential applications for dampers, cushions and electronic packaging. Furthermore, the interaction between nanoparticles and polymer in a novel architecture composed of PDMS and iron oxide nanoparticles is studied. The load bearing capacity of uniform composites enhanced by addition of nanoparticles, reaching to a maximum to 1.5 times of the PDMS upon addition of 5wt.% of nanoparticles, and then gradually decreased to 1/6th of PDMS upon addition of 20wt.% of nanoparticles. On the other hand, the load bearing capacity of architectured composites at high strains (≥40%) monotonically increased with addition of nanoparticles in the pillars.

L'étape clé pour intégrer des nanotubes de carbone à une échelle industrielle demeure un meilleur contrôle de leur croissance et notamment le contrôle sélectif de leurs chiralités en lien avec leurs propriétés électroniques. Ce travail a pour but de s'intéresser à la synthèse in-situ et à la caractérisation de nanotubes de carbone individuels par émission de champ pour mieux comprendre les mécanismes de nucléation et de croissance qui conditionnent sa chiralité. Nous avons développé un microscope à émission de champ couplé à un réacteur CVD (Chemical Vapor Deposition) pour observer directement la croissance catalytique de nanotubes de carbone individuels sur des pointes émettrices. Nous avons ainsi découvert que les nanotubes tournent souvent axialement pendant leur croissance, soutenant ainsi un modèle de « dislocation de vis ». L’analyse détaillée des résultats obtenus montre que nous observons directement la croissance atome par atome d'un nanotube monofeuillet individuel avec ajout d’un dimère de carbone à la fois à sa base. Parallèlement, des échantillons ont été caractérisés en détail sous émission de champ. Nous avons établi un protocole de collage de nanotubes individuels à l’apex d’une pointe métallique sous microscopies optique et électronique à balayage à l’aide d’un nanomanipulateur. Leur dépendance en température à très bas courant a été mise en évidence avec un compteur d’électrons afin d'identifier les différents domaines d'émission électronique. L'analyse des distributions énergétiques a fait apparaître un phénomène de chauffage induit qui peut mener à des températures de l’ordre de 2000 K à l’extrémité du nanotube lorsqu’il est soumis à un fort champ. / The key issue for realizing the potential of carbon nanotubes has always been, and still remains, a better control of their growth and in particular the selective control of their chirality related to their electronic properties. This work aims to address the in-situ synthesis and characterization of individual carbon nanotubes by field emission to better understand the mechanisms of nucleation and growth that determine their chirality. We have developed a field emission microscope coupled to a CVD reactor (Chemical Vapor Deposition) to observe directly the catalytic growth of individual carbon nanotubes on metallic tips. We found that nanotubes often turn axially during growth, thereby supporting a model of "screw dislocation". Detailed analysis of results shows that we directly observe the atom by atom growth of one individual single wall nanotube with addition of a carbon dimer to the base. In parallel, certain samples were characterized by in-depth field emission studies. For this we established a protocol of bonding individual nanotubes at the apexes of metal tips under optical and scanning electron microscopies using a nanomanipulator. Their temperature dependence at very low current has been demonstrated with an electron counter to identify the various fields of electron emission. Analysis of energy distributions revealed an induced heating phenomenon that can lead to temperatures of about 2000 K at the end of the nanotube subjected to strong fields that create high current emission.