This thesis deals with the non-equilibrium phenomena under shear observed mainly in bilayer forming liquid crystalline phases of mixed surfactant systems, anisotropic colloidal dispersions as well as Langmuir monolayers of membrane peptides. To correlate the structural transitions under shear with the mechanical properties or flow behaviour, the rheological measurements are combined with different techniques such as optical imaging (bright field, polarizing or confocal), small angle light scattering as well as small angle x-ray scattering (Rheo-SAXS) measurements. The bilayer forming phases that have been studied consist of mixed surfactant system formed by a mixture of ionic amphiphiles with strong binding organic counter ions. The propensity of the hydrophobic counterion to modify the spontaneous curvature at the micelle-water interface gives rise to a rich equilibrium phase behaviour consisting of different bilayer forming liquid crystalline mesophases in between the hexagonal and lamellar phases. The liquid crystalline mesophases presently examined under shear are the weakly swollen isotropic and lamellar phases as well as the random and rhombohedral mesh phases. The main motivation of the thesis was to examine the stability of these phases under shear since all the existing studies so far on shear induced structural transitions are mainly confined to highly swollen isotropic sponge phase of interconnecting bilayers that can transform to a lamellar phase consisting of a stack of bilayers with 1D quasi long range order or a dilute lamellar phase is shear transformed to a collapsed surfactant rich lamellar phase coexisting with excess solvent at Peclet Number greater than 1. The present study revealed for the first time a shear reversible crystallization above the equilibrium crystallization temperature in the weakly swollen isotropic and lamellar phases formed in the SDS-PTHC-water system where the structural transition is feasible through a shear induced segregation/microphase separation of the hydrophobic counterions to tune the curvature of the bilayer-water interface. These results incited us to examine the role of shear on another class of mesophases that are structurally similar to lamellar phase but with a non-uniform interfacial curvature of the bilayers identified as the intermediate mesh phases. Mesh phases are formed by a 1D stack of perforated bilayers with quasi-long range order where the water filled pores or curvature defects can have a liquid-like ordering in the plane of the bilayers as in a random mesh phase or the pores can have a square or hexagonal ordering locking into a three dimensional lattice with either tetragonal or rhombohedral symmetry to form Tα or R3m ordered mesh phases. Two characteristic features of the mesh phases that is noteworthy are i) the non-uniform mean curvature for the bilayers formed by 3-coordinated hexagonal mesh or the 4-coordinated square mesh; ii) the elasticity of the bilayers forming the hexagonal or square ordered mesh in R3m or Tα phases as opposed to the fluid-like bilayers with zero surface shear modulus in the random mesh or classical lamellar phases (Lα). Hence the structural similarity as well as differences of the mesh phases with the lamellar phase raises some pertinent questions regarding the stability of surfactant mesh phases under shear. Two striking consequences of shear flow on the random and ordered mesh phases of a cationic-anionic mixed surfactant system were revealed: a shear-induced 3D ordering of the curvature defects in LDα phase as well as a hydrodynamic instability wherein a sequence of structural rearrangements leading to buckling instability gives rise to unstable flows in the R3m phase. These studies on shear induced structural transitions on partially ordered mesophases is juxtaposed with the study on another class of systems that were examined under shear comprising dispersion of anisotropic colloidal rods. We demonstrate that these suspensions shear thicken at low concentrations (≥ 25 %) and origin of shear thickening is formation of stress bearing hydrodynamic clusters rather than order-disorder transition. Finally we also examine the rheological properties of a monolayer of membrane peptide Alamethicin where the coexistence of solid-like domains in a backround of liquid expanded phase at high surface concetrations gives rise to a dense anisotropic suspension in 2D. The rheological properties of these jammed fluid/fluid interfaces formed by membrane proteins is well explained by the soft glassy rheology model proposed earlier in the context of 3D soft glasses, comprising emulsions, foams, colloidal glasses and gels. Chapter 1 starts with a general introduction of soft condensed matter systems and then we proceed to describe surfactant systems, their phase behaviour and self assembly. The formation of liquid crystalline phases in pure surfactant systems and in presence of additives such as salt or counterions are discussed. A brief introduction to colloids is explained further. This is followed by the discussion on the inter-macromolecular forces governing soft matter systems such as van der Waals interaction, the screened Coulomb repulsion, hydrogen bond, depletion, peristaltic, hydrophobic and hydration forces and steric repulsion. We further explain the systems studied and their phase behaviour at different concentrations formed by SDS-PTHC-water, CTAB-SHN-water system in detail. In the next section we describe the characterization of different liquid crystalline phases viz. nematic, hexagonal, isotropic, lamellar, intermediate mesh and ribbon phases using cross polarizing optical microscopy, small angle x-ray and rheology. Then, a theoretical background of linear and nonlinear rheology, optical/confocal microscopy and x-ray scattering techniques are given. This is followed by discussion on flow properties of colloidal suspensions in dilute and semi-dilute regime and finally shear thickening phenomena observed in concentrated suspensions. We discuss shear thickening phenomena observed in anisotropic precipitated calcium carbonate (PCC) colloids. We have also discussed shear induced phase and structural transitions observed in different liquid crystalline phases. Chapter 2 discusses the experimental apparatus and techniques used in our studies. We have discussed the different components of the MCR-300 and 101 stress-controlled rheometer (Paar Physica, Germany). The cross polarizing optical microscopy in transmission and reflection mode using a home-made shear cell and in built set-up respectively, and small angle light scattering set-up are discussed. Next, we discuss in-situ small angle x-ray rheology setup, a home made Couette cell installed at RRI Bangalore, Couette installed at SWING beamline Soleil, Paris, France and parallel plate setup at PETRA III, Germany. This is followed by discussion on sample preparation and synthesis technique of silica colloidal rods and modification of surface potential using a thermo-responsive polymer. Further, we explain the algorithm to track rods and analysis of SAXS 2D diffraction pattern. Flow behaviour of different phases formed in SDS-PTHC-water system are described in Chapter 3. This chapter has been divided into four sections. In section I, we describe the phase behaviour and rheology of micellar solution at different surfactant concentrations (ϕ) and molar ratios (α = [PTHC]/[SDS]) of two components. At ϕ = 0.3, a transition from viscous to visco-elastic behaviour is observed with increasing α from 0 to 0.3. Zero shear viscosity shows a non-monotonic behaviour with increasing α and reveals a maxima at α = 0.15. At low α, we observe a Newtonian behaviour which changes to shear thinning behaviour with increasing α and finally again retains the Newtonian behaviour. Dynamic light scattering studies in conjunction with presence of nematic phase made up of disks (confirmed by cross-polarizing optical microscopy) at higher α > 0.325, suggest that the drop in zero shear viscosity is due to decrease in length of the micelles from rods to disks. A similar behaviour is observed with increasing ϕ at constant α = 0.2, 0.25, 0.6. A change in the morphology of micellar aggregates with increase in α is expected in mixed surfactant systems with strongly binding counterions. However the change in morphology of micellar aggregates with surfactant content in surprising which is witnessed for the first time in mixed surfactant systems. In section II of this chapter we discuss the phase behaviour and rehological properties of different liquid crystalline phases formed in SDS-PTHC-water system at ϕ = 0.4, and varying α from 0 to 0.4. Using deutrium nuclear magnetic resonance (NMR) studies we show that the transition from hexagonal phase at α = 0, to lamellar phase at α = 0.4 occurs through a nemtaic phase of rods at α = 0.05 and nemtaic phase of disks at α = 0.2 through an isotropic phase of rods at α = 0.15. NMR studies reveal a decrease in variation of the quadrupole splitting across the transition from NC to ND. The visco-elastic and flow behaviour of the different phases were examined. A decrease in the steady shear viscosity across the different phases with increasing α suggests a decrease in the aspect ratio of the micellar aggregates. From the transient shear stress response of the NC and ND nematic phases in step shear experiments, they were characterized to be tumbling and flow aligning, respectively. Our studies reveal that by tuning the morphology of the surfactant micelles, strongly binding counterions modify the phase behaviour and rheological properties of concentrated surfactant solutions. In section III, we discuss shear induced phase transition in SDS-PTHC-water system using in-situ rheo-optical imaging and in-situ rheo-SAXS. Bilayer forming liquid crystalline phases namely isotropic (Li - optically isotropic) and lamellar (Lα - optically birefringence) are formed at α = 1.5, ϕ = 0.4 and α = 1, ϕ = 0.5. Both phases co-exist with excess solvent and remain fully swollen at temperature T > 50 oC. We have constructed a dynamic phase diagram in the parameter space of shear rate and temperature which demonstrate a novel shear induced phase transition to a crystalline phase (Lc) above a critical shear rate. At constant shear rate, the increase in viscosity is accompanied by presence of birefringent texture of Lα phase after a waiting time (t) which decreases with increasing shear rate. The Lc phase is stable under shear and melts back to equilibrium Li phase once shear is stopped. At higher temperature a transition from Li → Lα is observed. In-situ small angle x-ray scattering reveals an evolution of additional peaks in small as well as wide angle region which does not evolve any further once the viscosity reaches a maxima. The Lc phase obtained under shear at different shear rates can be indexed to a triclinic lattice with the lattice parameters depending on shear rates. We propose that the possible origin of phase transition is re-distribution of counterions under shear which results in counterion-rich and counterion-poor region. This counterion rich region results in crystalline Lc phase. In addition to revealing a unique class of non-equilibrium phase transition, the present study urges a unique approach toward understanding shear-induced phenomena in concentrated meso-phases of mixed amphiphilic systems In section IV we propose a shear induced nucleation and growth of crystalline phase in metastable bilayer forming Li and Lα phases. Nucleation and growth of crystalline phase ac-celerated by shear exhibits a power law dependence on time. The time of nucleation strongly depends on the shear rate with different exponents for different phase compositions. The crystalline phase formed under the influence of shear is stable and irreversible for tempera-ture < 28 oC. The crystal structure obtained under shear can be indexed to a triclinic unit cell with different lattice parameters depending on the shear rate and concentration probed. In Chapter 4, we discuss shear induced transitions observed in mesh phases formed in cationic surfactant system CTAB in the presence of strongly binding counterions SHN formed at different surfactant concentration (ϕ) and molar ratio (α). Random mesh phase (LDα) formed at ϕ = 0.3, 0.4, 0.5 and α = 1 are identified as stack of bilayers having curvature defects in form of water filled pores in the plane of bilayers . These pores do not have any long range correlation either in-plane or across the plane. A 3D ordered mesh phase (R3m) is formed at α = 1 and ϕ = 0.6, where these pores have in-plane and out of plane positional correlation and locked into a 3D lattice with rhombohedral symmetry. These phases are easily identified from small angle x-ray scattering studies wherein LDα a diffuse peak corresponding to in-plane defect spacing (ddef ) is observed along with lamellar d-spacing (d). However several additional peaks along with lamellar peak are observed for R3m phase revealing a long range correlation of pores. By shearing different LDα phases formed at different ϕ′s, we D phases formed probe the effect of shear far and near to the R3m phase boundary. When Lα at ϕ = 0.3 and 0.4 are sheared at constant shear rate, we observe a structural transition to an onion phase which is accompanied by increase in viscosity at the onset of the transition. D When Lα phase formed near R3m phase at ϕ = 0.5 is sheared, we observe a decrease in viscosity which is accompanied by the presence of a sharp peak near the diffuse peak corresponding to ddef along with several other small as well as wide angle peaks. All these D phase. We propose that peaks can be indexed to R3m phase co-existing with equilibrium Lα the locking of the defects into a 3D lattice occurs when the in-plane correlation length (ddef ) is larger than the bilayer periodicity (d). Prior to appearance of sharp peak near ddef , we observe an a-orientation of lamellae i.e. bilayers align along the shear-gradient plane where shear is likely to increase the length of cylindrical arrays or rods. A shear driven increase in the length of the rods implies a larger radius of this in-plane circle forming the pores, leading to a lower curvature and consequently a lower curvature energy. This increase in average size of the pores under shear favored by the lower curvature energy is expected to increase the in-plane as well as the trans-bilayer correlation length of the defects. The Lα → R3m phase transition is also observed in another system cetylpyridinium chloride (CPCl)-SHN-water. Thus this type of transition is general feature of random mesh phases when sheared near R3m phase in the equilibrium phase diagram. A thixotropic behaviour with yield stress (σy = 500 Pa, is observed when equilibrium R3m phase is sheared. When the shear stress crosses a threshold value of 1000 Pa, we observe an avalanche behaviour with drop in viscosity of more than 4 orders of magnitude. This drop is accompanied by appearance of several sharp peaks which can be indexed to two or three R3m phases. The similar transition is observed under shear in R3m phase formed in CPCl-SHN-water system. We propose that shearing a 3D ordered lattice of defects as in the R3m phase leads to additional structural transitions, though the rhombohedral symmentry is retained. In Chapter 5, we discuss shear thickening observed in colloidal rods. Using rheology combined with microscopy, we demonstrate that origin of shear thickening in colloidal rods is the formation of hydroclusters and not order-disorder transition. We observe continuous (CST) as well as discontinuous shear thickening (DST) at volume fractions of colloidal sus-pension at 25 % and > 30 % respectively. In DST, in controlled stress measurements, flow curve exhibits an S-shaped flow curve (stress vs. shear rate) where we observe a negative slope in shear thickening regime. By combining fast confocal microscopy with rheometer (parallel plate geometry), we investigate the possible mechanism for shear thickening in our suspension and rule out order-disorder transition. This indicates that the shear thickening might be a consequence of formation of hydroclusters which is confirmed by modifying sur-face properties of these colloids where a thermo responsive microgel PNIPAM was used as a shell to the silica core. The advantage of using PNIPAM is that the polymer brush remains fully swollen below the lower critical solution temperature (LCST) and shrinks above the LCST (34 oC) acting as hard particles. Thus by controlling the temperature, the interparticle separation can be tuned. We observe a pure shear thinning and shear thickening behaviour below and above LCST respectively. We show that by changing the interparticle separation we can avoid hydrocluster formation arsing due to the hydrodynamic lubrication forces re-sponsible for the shear thickening. The calculation the order parameter and measurements on core-shell particles illustrate that microscopic origin of shear thickening is the formation of hydroclusters and not order-disorder transition. Chapter 6 deals with the 2D interfacial rheology of antibiotic alamethecin film at air-water interface. Fluorescence microscopy of alamethicin monolayers revealed a coexistence of liquid expanded (LE) and solid phases at the surface concentrations studied. Interfa-cial oscillatory shear measurements on alamethicin monolayers indicate that its viscoelastic properties are determined by the area fraction of the solid domains. The role of zwitterionic phospholipids dioleoylphosphatidyl choline (DOPC) and dioleoylphosphatidyl ethanolamine (DOPE) on the peptide aggregation behaviour was investigated. Fluorescence microscopy of alamethicin/phospholipid monolayers revealed an intermediate phase (I) in addition to the solid and LE phase. In mixed monolayers of phospholipid (L)/alamethicin (P), with increase in L/P, the monolayer transforms from a viscoelastic to a viscous fluid with the increase in area fraction of the intermediate phase. Further, a homogeneous mixing of alamethicin/lipid molecules is observed at L/P>4. Our studies also confirm that the visco-elasticity of alame-thicin/phospholipid monolayers is closely related to the alamethicin/phospholipid interac-tions at the air-water interface.

Die Lungen werden von einem oberflächenaktiven Gemisch, dem Surfactant ausgekleidet, das für die Regulation der Oberflächenspannung der Alveolen und die Immunabwehr der Lunge von Bedeutung ist. Bestandteile des Surfactants sind zu 90% Lipide und zu 10% vier durchalphabetisierte Surfactantproteine A bis D, von denen SP-A das mengenmäßig häufigste darstellt. Die Funktionen dieses Proteins liegen vermutlich in der Surfactanthomöostase und dabei im Phospholipid-Turnover der Hauptkomponente des Surfactants Dipalmitoylphosphatidylcholin (DPPC) und als Collektin in der Immunabwehr. In vitro ist die SP-A induzierte, calciumabhängige Liposomenaggregation eine charakteristische Eigenschaft des Proteins. In der vorliegenden Arbeit wurde die Wechselwirkung von SP-A mit Phospholipidliposomen mit der Resonant Mirror Spektroskopie und der Nah-Infrarot-Lichtstreuung untersucht. Durch den vergleichenden Einsatz der kinetischen Methoden ist es möglich, die Bindung von SP-A an Liposomen von der Aggregationsreaktion zu unterscheiden. Es konnte erstmals gezeigt werden, daß beide Reaktionen von mikromolaren Calciumkonzentrationen abhängig sind, die halbmaximale Reaktion erfolgt bei freien Calciumkonzentrationen < 20 µM. Die Ca2+-induzierte Interaktion zwischen SP-A und Liposomen zeigt eine hohe Kooperativität und ist durch Zugabe von Calciumchelatoren reversibel. Die Dissoziation der Liposomenbindung erfolgt schneller als der Zerfall der Aggregate (0,3 s vs. 30 s). Es sind zwei Konformationen des SP-A zu unterscheiden, eine lipidbindende Form in Gegenwart von Calcium und eine nichtbindende Form. Neben Calcium können auch mikromolare Strontium- und Bariumkonzentrationen die Konformationsänderung induzieren, Magnesium hingegen nicht. Die Liposomenbindung und nachfolgende Aggregation erfolgt bei SP-A von Rind, Ratte und Schaf in gleicher Weise in Abhängigkeit von mikromolaren Calciumkonzentrationen. Die Bindungseigenschaften des SP-A zeigen eine Abhängigkeit von der Art des verwendeten Phospholipids. Dabei zeigt sich eine "Affinität", im Sinne einer verstärkten Wechselwirkung mit DPPC, aber die postulierte Spezifität wurde in der kinetischen Analyse nicht bestätigt. SP-A interagiert bevorzugt mit Phospholipiden, die langkettige, gesättigte Fettsäureseitenketten besitzen (DPPC, Distearoylphosphatidylcholin), sowie mit Phosphatidylcholin und ähnlichen Kopfgruppen (Sphingomyelin, Phosphatidylinositol). Da neben den Kopfgruppen auch die Seitenketten bei der Erkennung durch das Protein bedeutsam sind, liegt nahe, daß die Packungsdichte der Lipidmoleküle in den Liposomen für die Interaktion wichtig ist. Die Ergebnisse werden als reversible, sequentielle Reaktionsfolge interpretiert: Diese ist ein Modell für die mögliche Wirkung von SP-A bei der Surfactanthomöostase, indem das Protein als Lipidtransporter zwischen alveolärer Hypophase und Typ-II-Pneumozyten funktioniert und erklärt, wie SP-A und Liposomen gemeinsam in die Zelle aufgenommen und auf unterschiedlichen Wegen wieder ausgeschleust werden könnten. / Surfactant protein A (SP-A) is crucial for lung function, including tubular myelin formation and lipid uptake by type II pneumocytes. Known properties of SP-A in vitro are ist Ca2+ dependent interaction with phospholipids and ist role in the aggregation of liposomes. To dissect and to analyze these processes, the SP-A was immobilized and liposome binding was measured by resonant mirror technique. Liposome aggregation was followed seperately by kinetic light scattering in suspensions. It was found that SP-A mediated binding and aggregation of liposomes depend on micromolar calcium concentrations in the range of < 20 µM, independent of the species (sheep, rat or cow) and of the phospholipid composition tested. The interaction between SP-A and liposomes shows cooperativity and reversibility. Liposomes dissociate from SP-A in < 0.3 s whereas disaggregation takes approx. 30 s. The interpretation of the results leads to a rapid and reversible reaction of three reactions: a cooperative Ca2+ dependent conformational change in SP-A, binding of Ca2+-bound SP-A to liposomes, and aggregation of the Ca2+/SP-A - bound liposomes. With palmitoyloleoylphosphatidylcholine (POPC), the complex formation proceeds two fold slower compared to DPPC, leading to a lower final equilibrium level of SP-A/lipid interaction. Regarding the phospholipid headgroups, phosphatidylinositol (PI) and sphingomyelin (SM) interact comparable to PC, whole less interaction is seen with phosphatidylethanolamine (PE) or phosphatidylserine (PS) or with phosphatidylglycerol (PG). Thus, both headgroup and fatty acid composition determine SP-A/phospholipid interaction. However, the protein has no high specificity, neither for the polar nor for the apolar moiety of phospholipids.

Les travaux présentés dans cette thèse portent premièrement sur la caractérisation de nouveaux photosensibilisateurs par des méthodes spectroscopiques. Ainsi les cinétiques de la réaction d'oxydation entre deux photosensibilisateurs à l'état triplet, imidazole-2-carboxaldehyde et 6-carboxypterine, et trois halogénures ont été déterminées par photolyse laser. La réactivité de l'état singulet de la 6- carboxypterine avec les halogénures et quatre acides organiques a été étudiée par fluorimétrie. Ces photosensibilisateurs sont relevants pour la photochimie à la surface de l'océan, mais également à la surface des particules atmosphériques. Les réactions mises en évidence mènent à la formation d'espèces radicalaires très réactives, influençant ainsi la composition de la phase condensée et gazeuse de l'environnement marin. La suite de cette étude s'est focalisée sur l'analyse des produits formés à partir de processus photo-induites à interface air-eau en présence d'une microcouche de surface d'un organique, utilisant deux organiques différents, l'octanol et l'acide nonanoique. En présence d'un photosensibilisateur et de lumière UVA, les changements en phase gaz ont été suivi par SRI-ToF-MS en ligne et en phase condensée par UPLC-(ESI)-HRMS. Ainsi on a démontré que la photochimie à la surface mène à la formation de produits fonctionnalisés et insaturés initiée par une abstraction d'hydrogène sur l'organique surfactant. Ces produits, observés en phase condensée et gazeuse, ont le potentiel de contribuer à la formation d'aérosols. Etonnamment, des produits ont également été observés dans les deux phases sans l'ajout d'un photosensibilisateur et montrant une activité photochimique de l'acide nonanoique seul à l'interface air-eau. Les mécanismes potentiels et les conséquences environnementales sont discutés / The works presented in this thesis concern firstly the characterization of two new photosensitizers by spectroscopic methods. This way the kinetics of the oxidation reaction between the triplet state of the photosensitizers, imidazole-2-carboxaldehyde and 6-carboxypterin, and three halides have been determined by laser flash photolysis. Also, the reactivity of the singlet state of 6-carboxypterin with halides and four organic acids has been studied by static fluorimetry. These photosensitizers are relevant for the photochemistry at the surface of the ocean, but also at the surface of atmospheric particles. The reactions evidenced by these studies lead to the formation of very reactive radical species influencing the composition of the condensed and gas phase of the marine environment. This study then focalized on the analysis of the products formed at the organic coated air-water interface through photo-induced processes. Two different organics were used as surfactants, octanol and nonanoic acid. In the presence of a photosensitizer and UVA light, the changes in the gas phase were monitored online by SRI-ToF-MS and in the condensed bulk phase by UPLC-(ESI)-HRMS offline analysis. These analysis showed that photochemical reactions at the interface lead to the formation of functionalized and unsaturated compounds initiated by a hydrogen abstraction on the organic surfactant. These products, observed in the condensed and gas phase have the potential to contribute to the formation of aerosols. Surprisingly, some of these products were also observed in the two phases without the presence of a photosensitizer, bringing into evidence a photochemistry of nonanoic acid at the air-water interface. Potential formation mechanisms of the products and environmental consequences are discussed

Les zones sources formées par les organochlorés dans les sols (DNAPL) peuvent contaminer les aquifères pour plusieurs siècles en alimentant un panache de composés dissous. Pour épuiser ces zones sources, pomper le DNAPL est la solution la plus simple, mais l’efficacité est limitée par le cheminement préférentiel de l'eau dans le sol et les forces capillaires qui piègent le DNAPL. Les stratégies plus agressives (dissolution, traitement thermique, dégradation chimique…) sont aussi plus coûteuses. Dans cette thèse, deux stratégies de traitement à base de mousse de surfactant ont été développées et évaluées au laboratoire en préparation d’un essai terrain. La première stratégie utilise l’injection de mousse en zone source pour mobiliser de façon contrôlée le DNAPL et le diriger vers des puits de pompage. Dans les meilleures conditions, la saturation en DNAPL après traitement a pu être abaissé en dessous de 1 % avec une consommation de surfactant inférieure à 10 g kg-1 de DNAPL éliminé. La seconde stratégie utilise la mousse comme vecteur de réactif (hydrogène) pour accélérer la biodégradation des composés dissous dans le panache. Sous forme de mousse, l’hydrogène a été délivré de façon ciblée et plus rémanente dans l’horizon à traiter. Les technologies développées se sont montrées très prometteuses à l’échelle du terrain et lors de l’évaluation technico-économique. De la recherche reste nécessaire pour rendre ces procédés plus prédictibles lors de leur mise en œuvre. / Source zones formed by chlorinated organic compounds in soils (DNAPL) can contaminate aquifers for several centuries by feeding a plume of dissolved compounds. To deplete those source zones, DNAPL pumping is the simplest option, but the efficacy is limited by preferential water flow in the soil and capillary forces that are trapping the DNAPL. More aggressive strategies (dissolution, thermal treatment, chemical degradation...) are also costlier. Within this thesis work, two treatment strategies using surfactant foam were developed and assessed at lab-scale to prepare field assessment. The first strategy relies on foam injection in the source zone to mobilize the DNAPL in a controlled fashion to drive it ahead to pumping wells. In the best conditions, DNAPL saturation was lowered below 1% after treatment with a surfactant consumption below 10 g kg-1 of DNAPL removed. The second strategy uses foam as a reagent (hydrogen) carrier to accelerate the biodegradation of dissolved compounds in the plume. When injected as a foam, hydrogen was delivered in a targeted and more persistent manner in the strata to be treated. Developed technologies showed to be promising at field-scale and when the technico-economic assessment was conducted. Research still remains to be done to make those techniques more predictable during their implementation.

This thesis focuses on the study of the interactions between polyelectrolytes and surfactants in aqueous solutions and at interfaces, as well as on the structural changes these molecules undergo due to that interaction. Small–angle neutron scattering, dynamic, and static light scattering were the main techniques used to investigate the interactions in bulk. The first type of polymer studied was a negatively charge glycoprotein (mucin); its interactions with ionic sodium alkyl sulfate surfactants and nonionic surfactants were determined. This system is of great relevance for several applications such as oral care and pharmaceutical products, since mucin is the main component of the mucus layer that protects the epithelial surfaces (e.g. oral tissues). Sodium dodecyl sulfate (SDS) on the other hand, has been used as foaming agent in tooth pastes for a very long time. In this work it is seen how SDS is very effective in dissolving the large aggregates mucin forms in solution, as well as in removing preadsorbed mucin layers from different surfaces. On the other hand, the nonionic surfactant n-dodecyl β-D-maltopyranoside (C12-mal), does not affect significantly the mucin aggregates in solution, neither does it remove mucin effectively from a negatively charge hydrophilic surface (silica). It can be suggested that nonionic surfactants (like the sugar–based C12-mal) could be used to obtain milder oral care products. The second type of systems consisted of positively charged polyelectrolytes and a negatively charged surfactant (SDS). These systems are relevant to a wide variety of applications ranging from mining and cleaning to gene delivery therapy. It was found that the interactions of these polyelectrolytes with SDS depend strongly on the polyelectrolyte structure, charge density and the solvent composition (pH, ionic strength, and so on). Large solvent isotopic effects were found in the interaction of polyethylene imine (PEI) and SDS, as well as on the interactions of this anionic surfactant and the sugar–based n-decyl β-D-glucopyranoside (C10G1). These surfactants mixtures formed similar structures in solutions to the ones formed by some of the polyelectrolytes studied, i.e. ellipsoidal micelles at low electrolyte concentration and stiff rods, at high electrolyte and SDS concentrations. / QC 20100901

This Thesis presents studies of molecular association in aqueous solution and at the liquid/solid interface. The investigated molecular systems range from self-aggregating surfactants to hydration water in contact with micelles or individual molecules. In most studies, combinations of various NMR methods were applied. These vary from simple chemical shift and intensity measurements to more elaborate self-diffusion and intermolecular cross-relaxation experiments. Non-ideal mixed micelles of fluorinated and hydrogenated surfactants were studied by an experimental procedure that allows an analysis in terms of micellar structure, using a minimal number of initial assumptions. Quantitative conclusions about micro-phase separation within mixed micelles were obtained within the framework of the regular solution theory. Additionally, NMR was introduced and developed as a powerful method for studying adsorption of surfactants at solid interfaces. Adsorption isotherms for pure and mixed surfactant systems and non-ideal mixing behavior of fluorinated and hydrogenated surfactants at solid surfaces were quantified. Fluorosurfactant-protein association was investigated using the methods described. Intermolecular cross-relaxation rates between solute and solvent molecules were recorded at several different magnetic fields. The results reveal strong frequency dependence for both small molecules and micelles. This finding demonstrates that intermolecular cross-relaxation is not solely controlled by fast local motions, but also by long-range translational dynamics. Data analysis in terms of recently developed relaxation models provides information about the hydrophobic hydration and micellar structure. / QC 20100914

This paper establishes Low-Tension-Gas (LTG) as a method for sub-miscible tertiary recovery in tight sandstone and carbonate reservoirs. The LTG process involves the use of a low foam quality surfactant-gas solution to mobilize and then displace residual crude after waterflood. It replicates the existing Alkali-Surfactant-Polymer (ASP) process in its creation of an ultra-low oil-water interfacial tension (IFT) environment for oil mobilization, but instead supplements the use of foam over polymer for mobility control. By replacing polymer with foam, chemical Enhanced Oil Recovery (EOR) methods can be expanded into sub-30 mD formations where polymer is impractical due to plugging, shear, or the requirement to use a low molecular weight polymer. Overall results indicate favorable mobilization and displacement of residual crude oil in both tight carbonate and tight sandstone reservoirs. Tertiary recovery of 75-95% ROIP was achieved for cores with 2-15 mD permeability, with similar oil bank and other ASP analogous process attributes observed. Moreover, similar recovery was achieved during testing at high initial oil saturation (56%), indicating high process tolerance to oil saturation and potential application for implementation at secondary recovery. In addition, a number of tools and relations were developed to improve the predictive relationship between observed coreflood properties and actual mobilization or displacement mechanisms which impact reservoir-scale flooding. These relations include qualitative dispersion comparison and calculation of in-situ gas saturation, macroscopic mobility ratio at the displacement fronts, and apparent viscosity of injected fluids. These tools were validated through use of reference gas and surfactant floods and indicate that stable macroscopic displacement can be achieved through LTG flooding in tight formations. Furthermore, to better reflect actual reservoir conditions where localized fractional flow of gas can vary substantially depending on mixing or gravity phenomenon, two additional sets of data were developed to empirically model behavior. Through testing of LTG co-injection at a number of discrete fractional flow values over a wide range, recovery was shown to achieve a relative maximum at 50% gas fractional flow which also corresponded with optimal observed mobility control as measured by the previously established tools. Likewise, through testing of surfactant-alternating-gas (SAG) injection cycling, displacement and overall recovery were shown to be improved versus reference co-injection flooding. Finally, by comparing the observed displacement and mobility data among co-injection and surfactant-alternating-gas floods, a new displacement mechanism is introduced to better relate actual displacement conditions with observed macroscopic mobility data. This mechanism emphasizes the role of liquid rate in actual displacement processes and a mostly static gas saturation (independent of gas rate) in altering liquid relative permeability and diverting injected liquid into lower permeability zones. / text

Cystic fibrosis (CF) is a single gene Mendelian disorder characterized by pulmonary disease and pancreatic insufficiency. Pulmonary disease is the major cause of death in CF patients. Although some cystic fibrosis transmembrane conductance regulator (CFTR) genotypes are associated with less severe disease, patients possessing the same genotype show great variation in pulmonary disease severity and progression. Genes involved in modulating the inflammatory response and genes increasing susceptibility to infection are proposed as modifiers of pulmonary disease severity. Polymorphisms selected for based on evidence that they affect the function of the gene and prevalence of the putative risk allele: 1) antiprotease gene alpha-1-antitrypsin (alpha-1-AT), 2) innate immunity genes: mannose binding lectin (MBL2) (promoter [G→C] at -221 and codon 52 (Arg52Cys, D allele), 54 (Gly54Asp, B allele), and 57 (Gly57Glu, C allele), and pulmonary surfactant genes SPA-1 (Arg219Trp), SPA-2 (Thr9Asn, Lys223Gln) and SPD (Thr11Met), 3) antioxidant genes GSTM1 and T1 (gene deletion polymorphisms), GSTP1 (Ile105Val) and GCLC repeats, 4) mucin genes (MUC2 and MUC5B). Pulmonary disease progression and survival in patients with chronic Burkholderia cepacia complex (BCC) infection were also investigated controlling for genomovar and RAPD type of the organism. BCC infection was associated with more severe pulmonary disease progression and worse survival. Alpha-1-AT genotype was not a major contributor to variability of pulmonary disease severity, but the results suggest that alpha-1-AT plasma levels during pulmonary infections may be affected by poor nutritional status. We showed similar pulmonary disease progression and MBL2 genotype. Contrary to the previous literature, wild-type MBL2 genotype was associated with steeper decline in pulmonary disease over time following chronic infection with BCC, but genotype was not associated with increased susceptibility to BCC infection. We showed inconsistant results for the pulmonary surfactant gene polymorphisms, GSTM1, T1 and GSTP1 polymorphisms, and number of repeats for GCLC and MUC5B depending on the phenotype investigated. We conclude that some of the variability in pulmonary disease severity and progression in CF is explained by polymorphisms in secondary genes.

Cystic fibrosis (CF) is a single gene Mendelian disorder characterized by pulmonary disease and pancreatic insufficiency. Pulmonary disease is the major cause of death in CF patients. Although some cystic fibrosis transmembrane conductance regulator (CFTR) genotypes are associated with less severe disease, patients possessing the same genotype show great variation in pulmonary disease severity and progression. Genes involved in modulating the inflammatory response and genes increasing susceptibility to infection are proposed as modifiers of pulmonary disease severity. Polymorphisms selected for based on evidence that they affect the function of the gene and prevalence of the putative risk allele: 1) antiprotease gene alpha-1-antitrypsin (alpha-1-AT), 2) innate immunity genes: mannose binding lectin (MBL2) (promoter [G→C] at -221 and codon 52 (Arg52Cys, D allele), 54 (Gly54Asp, B allele), and 57 (Gly57Glu, C allele), and pulmonary surfactant genes SPA-1 (Arg219Trp), SPA-2 (Thr9Asn, Lys223Gln) and SPD (Thr11Met), 3) antioxidant genes GSTM1 and T1 (gene deletion polymorphisms), GSTP1 (Ile105Val) and GCLC repeats, 4) mucin genes (MUC2 and MUC5B). Pulmonary disease progression and survival in patients with chronic Burkholderia cepacia complex (BCC) infection were also investigated controlling for genomovar and RAPD type of the organism. BCC infection was associated with more severe pulmonary disease progression and worse survival. Alpha-1-AT genotype was not a major contributor to variability of pulmonary disease severity, but the results suggest that alpha-1-AT plasma levels during pulmonary infections may be affected by poor nutritional status. We showed similar pulmonary disease progression and MBL2 genotype. Contrary to the previous literature, wild-type MBL2 genotype was associated with steeper decline in pulmonary disease over time following chronic infection with BCC, but genotype was not associated with increased susceptibility to BCC infection. We showed inconsistant results for the pulmonary surfactant gene polymorphisms, GSTM1, T1 and GSTP1 polymorphisms, and number of repeats for GCLC and MUC5B depending on the phenotype investigated. We conclude that some of the variability in pulmonary disease severity and progression in CF is explained by polymorphisms in secondary genes.

Diss. (sammanfattning) Stockholm : Karolinska institutet, 2005. / Härtill 4 uppsatser.