Объектом исследования является конструкция цилиндрической линзы Люнеберга из однородного диэлектрика. Целью работы являлась разработка способа проектирования цилиндрической линзы Люнеберга на основе однородного материала. В работе были рассмотрены различные способы задания структуры цилиндрической линзы из однородного диэлектрика, описан процесс их моделирования, проведен анализ полученных результатов. В качестве способа изготовления была выбрана 3-D печать из пластика. Получена аппроксимирующая функция, позволяющая создать цилиндрическую линзу Люнеберга с плавным изменением эффективной диэлектрической проницаемости по радиальной координате. Приведены результаты ее моделирования. / The object of the research is the construction of a cylindrical Luneberg lens from a uniform dielectric. The aim of the work was to develop ways to design a cylindrical Luneberg lens based on a homogeneous material. In this paper, various ways of setting a cylindrical lens made of a uniform dielectric, the described process of modeling them were considered, and the results were analyzed. As a method of manufacturing was chosen 3-D printing from plastic. An approximating function is obtained, which makes it possible to create a cylindrical Ludberg lens with a smooth variation of the effective dielectric constant along the radial coordinate. The results of its modeling are given.

Five-dimensional (5-D) light field video (LFV) (also known as plenoptic video) is a more powerful form of representing information of dynamic scenes compared to conventional three-dimensional (3-D) video. In this dissertation, the spectra of moving objects in LFVs are analyzed, and it is shown that such moving objects can be enhanced based on their depth and velocity by employing 5-D digital filters, what is defined as depth-velocity filters. In particular, the spectral region of support (ROS) of a Lambertian object moving with constant velocity and at constant depth is shown to be a skewed 3-D hyperfan in the 5-D frequency domain. Furthermore, it is shown that the spectral ROS of a Lambertian object moving at non-constant depth can be approximated as a sequence of ROSs, each of which is a skewed 3-D hyperfan, in the 5-D continuous frequency domain. Based on the spectral analysis, a novel 5-D finite-extent impulse response (FIR) depth-velocity filter and a novel ultra-low complexity 5-D infinite-extent impulse response (IIR) depth-velocity filter are proposed for enhancing objects moving with constant velocity and at constant depth in LFVs. Furthermore, a novel ultra-low complexity 5-D IIR adaptive depth-velocity filter is proposed for enhancing objects moving at non-constant depth in LFVs. Also, an ultra-low complexity 3-D linear-phase IIR velocity filter that can be incorporated to design 5-D IIR depth-velocity filters is proposed. To the best of the author’s knowledge, the proposed 5-D FIR and IIR depth-velocity filters and the proposed 5-D IIR adaptive depth-velocity filter are the first such 5-D filters applied for enhancing moving objects in LFVs based on their depth and velocity. Numerically generated LFVs and LFVs of real scenes, generated by means of a commercially available Lytro light field (LF) camera, are used to test the effectiveness of the proposed 5-D depth-velocity filters. Numerical simulation results indicate that the proposed 5-D depth-velocity filters outperform the 3-D velocity filters and the four-dimensional (4-D) depth filters in enhancing moving objects in LFVs. More importantly, the proposed 5-D depth-velocity filters are capable of exposing heavily occluded parts of a scene and of attenuating noise significantly. Considering the ultra-low complexity, the proposed 5-D IIR depth-velocity filter and the proposed 5-D IIR adaptive depth-velocity filter have significant potentials to be employed in real-time applications. / Graduate / 0544

Three-dimensional (3-D) system integration is believed to be a promising technology and has gained tremendous momentum in the semiconductor industry recently. The Silicon interposer is the key enabler for the 3-D systems, and is expected to have high input/output counts, fine wiring lines and many TSVs. Modeling and design of the silicon interposer can be challenging and is becoming a critical task. This dissertation mainly focuses on developing an efficient modeling approach for silicon interposers in 3-D systems. The developed numerical methods can be classified as several categories. 1. The investigation of the coupling effects in large TSV arrays in silicon interposers. The importance of coupling between TSVs for low resistivity silicon substrates is quantified both in frequency and time domains. This has been compared with high resistivity silicon substrates. 2. The development of an electromagnetic modeling approach for non-uniform TSVs. To model the complex TSV structures, an approach for modeling conical TSVs is proposed first. Later a hybrid modeling method which combines the conical TSV modeling method and cylindrical modeling method is proposed to model the non-uniform TSV structures. 3. The development of a hybrid modeling approach for power delivery networks (PDN) with through-silicon vias (TSVs). The proposed approach extends multi-layer finite difference method (M-FDM) to include TSVs by extracting their parasitic behavior using an integral equation based solver. 4. The development of an efficient approach for modeling signal paths with TSVs in silicon interposers. The proposed method utilizes the 3-D finite-difference frequency-domain (FDFD) method to model the redistribution layer (RDL) transmission lines. A new formulation on incorporating multiport networks into the 3-D FDFD formulation is presented to include the parasitic effects of TSV arrays in the system matrix. 5. The development of a 3-D FDFD non-conformal domain decomposition method. The proposed method allows modeling individual domains independently using the FDFD method with non-matching meshing grids at interfaces. This non-conformal domain decomposition method is applied to model interconnections in silicon interposer.

<p>In spite of all electronic navigation devices on a modern ship bridge, navigators still lose their orientation. Reasons for this might be excessive cognitive workload caused by too many instruments to read and compile, navigation information that is displayed in a cognitively demanding way, short decision times due to high speed or fatigue due to minimum manning and long work hours.</p><p>This work addresses the problem of map information displayed in a less than optimal way. Three new concepts are presented: the bridge perspective, the NoGO area polygons and a dual lane seaway network. Map reading can be difficult due to the problem of mental rotations. By allowing a 3-D nautical chart to be viewed from an egocentric bridge perspective, the need for mental rotations can be removed. The cognitively demanding calculations necessary to find out if there is enough water under the keel can be made by the chart system and the result displayed as of free water and NoGo areas. On land car driving is facilitated by a road-network and a sign system. This notion can be further developed on sea and make navigation easier and safer.</p><p>These concepts were then tested in a laboratory experiment, in interviews and in a prototyping project. The results were very promising. The experiment in a laboratory maze showed that map reading from an egocentric perspective was more efficient than using traditional paper and electronic maps. Interviews and expert evaluation of prototypes also showed great interest from practitioners in the field.</p> / <p>Trots all elektronisk utrustning på en modern skeppsbrygga händer det att navigatörerna förlorar orienteringen. Anledningen kan vara hög kognitiv belastning därför att för många olika instrument måste avläsas och integreras samtidigt, att informationen på instrumenten behöver tolkas på ett kognitivt krävande sätt, att tiden för att fatta beslut blir allt kortare på grund av högre hastigheter till sjöss eller på grund av trötthet.</p><p>I detta arbete presenteras tre nya koncept för visualisering av navigationsinformation: bryggperspektivet, djupvarningspolygoner och sjövägar.</p><p>Kartläsning kan ibland vara svårt på grund av de mentala rotationer en användare tvingas genomföra för att kunna jämföra kartan med verkligheten. Genom att göra det möjligt för en användare att se sjökortet ur ett egocentriskt bryggperspektiv, så onödiggörs dessa mentala rotationer. De kognitivt krävande beräkningar som navigatören behöver göra för att försäkra sig om att det finns tillräckligt med vatten under kölen, kan utföras av kartsystemet och resultatet visas istället som fria vattenytor och djupvarningsområden (NoGo areas). På land underlättas bilkörning av ett vägnät med körbanor, filer och skyltar. Detta system kan i högre utsträckning införas till sjöss för att underlätta säker navigering.</p><p>Dessa koncept har sedan testats genom ett laboratorieexperiment, genom intervjuer och i ett prototyputvecklingsprojekt. Resultaten var mycket lovande. Experimentet i en laboratorielabyrint visade klart att 3D-sjökortet var effektivare än både papperskartan och traditionell elektroniska kartor och intervjuerna och expertutvärderingarna visad på stort intresse från yrkesutövare i branschen.</p>

Transient liquid phase (TLP) bonding has proven to be the preferred method for joining extremely difficult-to-weld advanced materials, including similar and dissimilar superalloys. In this work, an approach that combines experiments and theoretical simulations are used to investigate the effect of temperature gradient (TG) in a vacuum furnace on the temperature distribution in TLP bonded samples. When joining similar materials by this technique, the simulated results with experimental verifications show that, irrespective of where the samples are placed inside the vacuum furnace, a TG in the furnace can translate into a symmetric temperature distribution in bonded samples provided the diffusion direction is parallel to the source of heat emission. In addition, the effects of TLP bonding parameters on the joint microstructure were investigated during the joining of nickel-based IN738 and CMSX-4 single crystal (SX) superalloys. An increase in holding time and reduction in gap size reduces the width of eutectic product that forms within the joint region. It was also found that Liquid-state diffusion (LSD) can occur and have significant effects on the microstructure of dissimilar TLP bonded joints even though its influence is often ignored during TLP bonding. The occurrence of LSD produced single crystal joint when a SX and polycrystal substrate were bonded. This formation of a SX joint which cannot be exclusively produced by solid-state diffusion has not been previously reported in the literature. / February 2017

The presence of man-made levees along the Lower Mississippi River (MR) has significantly reduced the River sediment input to the wetlands and much of the River's sediment is now lost to the Gulf of Mexico. The sediment load in the River has also been decreased by dams and river revetments along the Upper MR. Freshwater and sediment diversions are possible options to help combat land loss. Numerical modeling of hydrodynamics and sediment transport of the MR is a useful tool to evaluate restoration projects and to improve our understanding of the resulting River response. The emphasis of this study is on the fate of sand in the river and the distributaries. A 3-D unsteady flow mobile-bed model (ECOMSED; HydroQual 2002) of the Lower MR reach between Belle Chasse (RM 76) and downstream of Main Pass (RM 3) was calibrated using field sediment data from 2008 – 2010 (Nittrouer et al. 2008; Allison, 2010). The model was used to simulate River currents, diversion sand capture efficiency, erosional and depositional patterns with and without diversions over a short period of time (weeks). The introduction of new diversions at different locations, e.g., Myrtle Grove (RM 59) and Belair (RM 65), with different geometries and with different outflows was studied. A 1-D unsteady flow mobile-bed model (CHARIMA; Holly et al. 1990) was used to model the same Lower MR reach. This model was used for longer term simulations (months). The simulated diversions varied from 28 m3/s (1, 000 cfs) to 5, 700 m3/s (200, 000 cfs) for river flows up to 35, 000 m3/s (1.2x106 cfs). The model showed that the smaller diversions had little impact on the downstream sand transport. However, the larger diversions had the following effects: 1) reduction in the slope of the hydraulic grade line downstream of the diversion; 2) reduction in the available energy for transport of sand along distributary channels; 3) reduced sand transport capacity in the main channel downstream of the diversion; 4) increased shoaling downstream of the diversion; and 5) a tendency for erosion and possible head-cutting upstream of the diversion.

A 3-D numerical model of the Head of Passes and Bird’s Foot Delta of the Mississippi River- was developed. The model was based on Delft3D and simulates the hydrodynamics and salinity transport for Head of Passes area from RM 6.5 to Gulf of Mexico. The model was calibrated, validated, and used to predict the response of the river to certain stimuli, such as - channel closures, channel modifications and diversions. The model includes West Bay, Southwest Pass, South Pass, Pass-A-Loutre and Main Pass. Three basic cases were developed: existing conditions, closure of Southwest Pass with a levee of 1.5m with dredging of Pass-A-Loutre to 13.7 meter depth, and closure of Southwest Pass and South Pass with dredging of Pass-A-Loutre to 13.7 meter (45 ft) depth. Salinity has been added to the model. It has been proved that salinity intrusion has a significant impact on the model instantaneous discharge. For all passes except Southwest Pass instantaneous discharge decreases almost in half. Closure of Southwest Pass and dredging of Pass-A-Loutre leads to changes in flow speed and distribution. As a result Pass-A-Loutre becomes a main River channel.

Wüstenameisen (Cataglyphis fortis) orientieren sich mittels Wegintegration sowie, in visuell abwechslungsreichem Gelände, anhand von Landmarken. In der vorliegenden Arbeit wurden in Verhaltensexperimenten die Orientierungsmechanismen von C. fortis im Kontext dreidimensionaler Routen untersucht. 1. Wüstenameisen sind in der Lage, Steigungen und Gefälle eines dreidimensionalen Laufs mit den korrespondierenden Grunddistanzen in ihren Heimvektor zu integrieren. Hierdurch bleibt eine zweidimensionale Wegintegration selbst in hügeligem Gelände akkurat. 2. Entlang bekannter Routen werden Eigenschaften eines Aufstiegs wie Winkel und Länge gespeichert. Wenn Auf- und Abstiege nur auf dem Hinweg zu einer Futterquelle auftreten, werden sie trotzdem auch auf dem Rückweg akzeptiert. 3. Erfolgreiche Aufstiege führen zu einer neu erlernten, generellen Akzeptanz von Rampen, selbst wenn ihr Auftreten inkongruent mit dem aktuell erlernten Lauf ist. 4. Haben Wüstenameisen im Test die Wahl zwischen einem Auf- bzw. Abstieg und einem horizontalen Kanal, entscheiden sie sich häufiger für die Rampen und legen auf ihnen größere Distanzen zurück, wenn auch das vorherige Training geneigte Streckenabschnitte besaß. Dies gilt auch, wenn die Kombination eines Auf- und Abstiegs im Training einen horizontalen Vektor zur Folge hatte. Die Reihenfolge von Auf- und Abstiegen wird jedoch nicht gespeichert, ebenso wenig die Distanz einer Rampe von Nest und Futterstelle. 5. Erzwungene vertikale Ablenkungen im Lauf einer Ameise werden nicht kompensiert. Der Heimvektor besitzt demnach keine vertikale Komponente, sondern funktioniert auf Basis der Korrektur geneigter Wegstrecken zu ihren entsprechenden Grunddistanzen. Cataglyphis fortis verfügt demnach nicht über eine tatsächlich dreidimensionale Repräsentation ihrer Routen. Stattdessen ermöglicht ihr wahrscheinlich das Zusammenspiel einer Reihe einfacherer Navigationsmechanismen eine genaue Orientierung auch in hügeligem Terrain. / Desert ants (Cataglyphis fortis) orientate by means of path integration, and the use of landmarks, if available. In this thesis, behavioural experiments were conducted to elucidate C. fortis’ orientation mechanisms in the context of three-dimensional routes. 1 Along a three-dimensional route, desert ants are able to incorporate the ground distances of slopes into their home vector. Thus, two-dimensional path integration remains accurate also in hilly terrain. 2 Along familiar routes, ants store and recall a slope’s properties such as inclination and length. Even if ascents and descents only occur on the outbound trip, they are also accepted on the homebound run nevertheless. 3 Successful ascents result in a newly learnt, general acceptance of ramps, even if their occurrence is incongruent with a currently learnt route. 4 Given that desert ants can choose between a horizontal continuation of a channel and a ramp, they decide more often to walk on ramps if earlier training included sloped path segments, and continue to walk on them for greater distances. This is also the case if a combination of an ascent and descent results in a horizontal home vector during training. Neither their sequence nor the distance of a ramp from nest and feeder is stored and subsequently recalled. 5 Forced vertical detours in an ant’s run are not compensated for. The home vector consequently possesses no vertical component, and instead is functional due to the correction of sloped path segments to their respective ground distances. In summary, three-dimensional orientation in C. fortis is carried out by the combination of several mechanisms, namely (1) a global vector that corresponds to a plane projection of a route in the horizontal plane; (2) behavioural rules that are generally learnt; and (3) the storing and recollection of specific information along familiar routes.

Design techniques for heterogeneous three-dimensional (3-D) integrated circuits are developed in this thesis. Heterogeneous 3-D integration is a platform for multifunctional, high performance, and low power electronics. For the advancement of heterogeneous 3-D ICs, contactless solutions are investigated to implement inter-tier communication between tiers manufactured with disparate processes and heterogeneous technologies. Two challenges for the development of contactless inter-tier communication are addressed, the design of energy efficient, heterogeneous inductive link transceivers and the impact of crosstalk noise due to the on-chip spiral inductors. Inter-tier communication between circuits fabricated with disparate technologies requires transceivers capable of operating at dissimilar voltages. A low power transceiver design methodology is proposed exploiting the difference in the core voltage between disparate manufacturing processes in a 3-D system in package. A transceiver is designed to provide inter-tier communication between a sensing layer, designed in a commercial 0.35 Âμm process and a processing layer, designed in an advanced 65 nm process. A significant gain in the power consumed by the transceiver is shown compared to equivalent state-of-the-art prototypes, profiting by the tradeoff between the core voltage and sensing ability of the transceiver circuit in each process. Due to their wireless nature, however the use of inductive links introduces crosstalk noise due to the coupling between the on-chip inductor and on-chip interconnects in the vicinity of the inductor. The noise caused by the inductor on the power distribution network of an integrated system is explored, analysed, and modelled through electromagnetic simulations. The spatial distribution of the noise is described for several power distribution topologies to determine the preferred placement solution for the power and ground network in the vicinity of the inductor, considering the impact on other sources of noise, such as the resistive drop. Depending upon the power distribution network topology, the induced noise can be reduced up to 70% when the additional noise caused by the inductive link is considered by the routing algorithm. Additionally, a methodology utilising an analytic model is proposed for the evaluation of the crosstalk noise without resorting to electromagnetic simulations. A closed-form magnetostatic model is developed to assess the mutual inductance between the on-chip inductor and the power distribution network. Utilising the mutual inductance model, the crosstalk noise is evaluated with SPICE simulations. A signifcant benefit in speedup is achieved, up to four orders of magnitude for determining the mutual inductance and up to 4.7× for the assessment of the crosstalk noise. The accuracy of the model is within 10% of the electromagnetic simulation.

Made available in DSpace on 2016-04-29T14:23:50Z (GMT). No. of bitstreams: 1 Marco Alves Silvestro.pdf: 1622003 bytes, checksum: f22ed74ab1f33d1bafd9b98aa5506aa4 (MD5) Previous issue date: 2009-06-19 / The main objective of this thesis named The role of photography in hypermedia is to investigate the characteristics that photography acquires when it is integrated into the context of hypermedia. The point of departure is the technical history of photography and the transmutations it is undergoing in the digital world. Then, photography is studied as a language. The method that was applied was to identify the technical and stylistic devices of photography such as plane, ground, focus, movement, angles, illumination, perspective and others. The same procedure was followed concerning hypermedia, a hybrid language which, thanks to the digital process, the speranto of machines, is structured in a mixture of several languages, photography among them. In the end, the role of photography in hypermedia was studied in light of the evolution in the modes of production of the image with an emphasis in 3D computational image / A dissertação intitulada O papel da foto na hipermídia tem como principal objetivo efetuar uma investigação sobre as características que a fotografia adquire quando integrada no contexto da hipermídia. Parte-se da história técnica da fotografia e as transmutações por que vem passando no mundo digital, para, então, estudá-la como linguagem. O método utilizado para isso foi o da identificação de seus recursos técnico-estilísticos, tais como: plano, foco, movimento, ângulo, iluminação, perspectivas entre outros. O mesmo se fez com a hipermídia, uma linguagem híbrida que, graças ao esperanto das máquinas, ou seja, o processo digital, é tecida na conjugação de várias linguagens, entre elas, a fotografia. Por fim, o papel da foto na hipermídia foi estudado à luz da evolução nos modos de produção da imagem, com ênfase na imagem computadorizada 3D