The Internet of Things (IoT) is composed of billions of sensors and actuators that have varying tasks aimed at making industry, healthcare, and home life more efficient. These sensors and actuators are mainly low-powered and resource-constrained embedded devices with little room for implementing IP security in addition to their main function. With the fact that more of these devices are using IPv6 addressing, we seek to adapt a moving-target defense measure called Moving Target IPv6 Defense for use with embedded devices in order to add an additional layer of security. This adaptation, which we call Micro-Moving Target IPv6 Defense, operates within IPv6 over Low power Wireless Personal Area Networks (6LoWPAN) which is used in IEEE 802.15.4 wireless networks in order to establish IPv6 communications. The purpose of this defense is to obfuscate the communications between a sensor and a server in order to thwart a potential attacker from performing eavesdropping, denial-of-service, or man-in-the-middle attacks. We present our work in establishing this security mechanism and analyze the required control overhead on the wireless network. / Master of Science

Cette thèse vise à améliorer la pile de protocoles pour réseaux de capteurs sans fil à récupération d'énergie afin de les rendre autonomes dans un contexte multi-saut. Elle s'inscrit dans le projet GreenNet de STMicroelectronics qui a pour objectif de concevoir et développer une nouvelle génération d'objets intelligent basés sur la récupération d'énergie ambiente en vue de l'intégration dans l'Internet des Objets. L'originalité de la plateforme GreenNet repose sur sa petite taille qui implique une faible capacité de stockage d'énergie ainsi qu'une faible capacité de récupération d'énergie. Avec un si faible budget d'énergie, les protocoles standards ou les solutions proposées par les communautés académique/industrielle ne permettant pas d'assurer un fonctionnement autonome de ces réseaux. Dans cette thèse, nous analysons les protocoles standards et les solutions existantes pour identifier leurs limites avec la plateforme GreenNet. Ensuite, nous proposons 3 contributions afin de permettre cette autonomie. La première contribution est MCBT, un protocole permettant d'accélérer la découverte et le rattachement de nouveaux noeuds à un réseau multi saut et multi-canaux en formation ou existent. Ce protocole réduit efficacement l'énergie dépensée dans cette phase fortement consommatrice. La deuxième contribution est STADA, un algorithme adaptant l'activité des capteurs en fonction des conditions locales de trafic et d'énergie disponible. STADA est basé sur une fonction de pondération qui tient compte de l'énergie présente dans la batterie, du taux de récupération d'énergie et du trafic local. Enfin, notre troisième contribution propose une nouvelle métrique de routage basée sur Expected Delay synthétisant en une seule variable monotone des facteurs tels que l'éloignement au puits, les chemins bénéficiant d'un ordonnancement de relayage de paquet privilégié et de périodes cumulées d'activité des radios sur le chemin favorable. Toutes les solutions proposées sont conçues pour fonctionner avec la norme IEEE 802.15.4 slotté et sont facilement transposables à son évolution définie par la norme IEEE 802.15.4e. Nous avons validé les protocoles proposés grâce à un simulateur émulant des noeuds réels (Cooja) et au simulateur WSNet. Les résultats ont montré de meilleures performances en termes de consommation d'énergie et de qualité de service par rapport à l'existant. / This thesis concerns energy efficient protocols for harvested wireless sensor networks. It is a part of an industrial Internet of Things project. STMicroelectronics started the GreenNet project with the objective to develop and design a new generation of harvesting smart objects to be integrated in the Internet of Things. The GreenNet platform is novel with respect to the existing solutions due to its small size that implies a small energy buffer and small harvesting capabilities. This aspect makes the standard protocols and precedent solutions not directly applicable on this extremely low power platform. In this dissertation, we analyse standard protocols and existing solutions to identify their issues in the gn platform. Then, we provide protocol and algorithm adaptations to make feasible the concept of auto configurable and sustainable networks of GreenNet nodes. We proposed MCBT, an energy efficient protocol for the bootstrap procedure. It enables low power nodes to be enrolled in mh mc wireless sensor networks thanks to the network support for enrolling new nodes. It represents an energy efficient solution that extends the standard protocol. We proposed STADA, a sustainable algorithm to adapt the node activity according to the available energy and traffic conditions. STADA is based on a weighted function that takes into account the energy present in the battery, the energy harvesting rate, and network traffic. In this way, the algorithm takes into account all main parameters to adapt the energy consumption and improve the node performance. To make the harvested network more efficient according to light variations, we proposed a novel metric that makes the path choice a simple process. With the Expected Delay, we synthesize all network parameters in a single monotonic variable that facilitates the path choice in mh harvesting wireless sensor networks. All proposed solutions are designed to work with standard beacon-enabled IEEE 802.15.4 protocols and are easily portable on the future version of IEEE 802.15.4e. We validated the proposed protocols with emulations and simulations. The evaluation results shown better performance in terms of energy consumption and quality of service.

Cette thèse vise à améliorer la pile de protocoles pour réseaux de capteurs sans fil à récupération d'énergie afin de les rendre autonomes dans un contexte multi-saut. Elle s'inscrit dans le projet GreenNet de STMicroelectronics qui a pour objectif de concevoir et développer une nouvelle génération d'objets intelligent basés sur la récupération d'énergie ambiente en vue de l'intégration dans l'Internet des Objets. L'originalité de la plateforme GreenNet repose sur sa petite taille qui implique une faible capacité de stockage d'énergie ainsi qu'une faible capacité de récupération d'énergie. Avec un si faible budget d'énergie, les protocoles standards ou les solutions proposées par les communautés académique/industrielle ne permettant pas d'assurer un fonctionnement autonome de ces réseaux. Dans cette thèse, nous analysons les protocoles standards et les solutions existantes pour identifier leurs limites avec la plateforme GreenNet. Ensuite, nous proposons 3 contributions afin de permettre cette autonomie. La première contribution est MCBT, un protocole permettant d'accélérer la découverte et le rattachement de nouveaux noeuds à un réseau multi saut et multi-canaux en formation ou existent. Ce protocole réduit efficacement l'énergie dépensée dans cette phase fortement consommatrice. La deuxième contribution est STADA, un algorithme adaptant l'activité des capteurs en fonction des conditions locales de trafic et d'énergie disponible. STADA est basé sur une fonction de pondération qui tient compte de l'énergie présente dans la batterie, du taux de récupération d'énergie et du trafic local. Enfin, notre troisième contribution propose une nouvelle métrique de routage basée sur Expected Delay synthétisant en une seule variable monotone des facteurs tels que l'éloignement au puits, les chemins bénéficiant d'un ordonnancement de relayage de paquet privilégié et de périodes cumulées d'activité des radios sur le chemin favorable. Toutes les solutions proposées sont conçues pour fonctionner avec la norme IEEE 802.15.4 slotté et sont facilement transposables à son évolution définie par la norme IEEE 802.15.4e. Nous avons validé les protocoles proposés grâce à un simulateur émulant des noeuds réels (Cooja) et au simulateur WSNet. Les résultats ont montré de meilleures performances en termes de consommation d'énergie et de qualité de service par rapport à l'existant. / This thesis concerns energy efficient protocols for harvested wireless sensor networks. It is a part of an industrial Internet of Things project. STMicroelectronics started the GreenNet project with the objective to develop and design a new generation of harvesting smart objects to be integrated in the Internet of Things. The GreenNet platform is novel with respect to the existing solutions due to its small size that implies a small energy buffer and small harvesting capabilities. This aspect makes the standard protocols and precedent solutions not directly applicable on this extremely low power platform. In this dissertation, we analyse standard protocols and existing solutions to identify their issues in the gn platform. Then, we provide protocol and algorithm adaptations to make feasible the concept of auto configurable and sustainable networks of GreenNet nodes. We proposed MCBT, an energy efficient protocol for the bootstrap procedure. It enables low power nodes to be enrolled in mh mc wireless sensor networks thanks to the network support for enrolling new nodes. It represents an energy efficient solution that extends the standard protocol. We proposed STADA, a sustainable algorithm to adapt the node activity according to the available energy and traffic conditions. STADA is based on a weighted function that takes into account the energy present in the battery, the energy harvesting rate, and network traffic. In this way, the algorithm takes into account all main parameters to adapt the energy consumption and improve the node performance. To make the harvested network more efficient according to light variations, we proposed a novel metric that makes the path choice a simple process. With the Expected Delay, we synthesize all network parameters in a single monotonic variable that facilitates the path choice in mh harvesting wireless sensor networks. All proposed solutions are designed to work with standard beacon-enabled IEEE 802.15.4 protocols and are easily portable on the future version of IEEE 802.15.4e. We validated the proposed protocols with emulations and simulations. The evaluation results shown better performance in terms of energy consumption and quality of service.

En s'appuyant sur une connaissance précise du temps, sur la réservation de ressources et l'application distribuée de règles d'admission strictes, un réseau déterministe permet de transporter des flux pré-spécifiés avec un taux de perte extrêmement bas et une latence maximale majorée, ouvrant la voie au support d'applications critiques et/ou temps-réel sur une infrastructure de réseau convergée. De nos jours, la Technologie Opérationnelle (OT) s'appuie sur des réseaux déterministes mais conçus à façon, en général propriétaires, utilisant typiquement des liens série spécifiques, et opérés en isolation les uns des autres, ce qui multiplie la complexité physique et les coûts d'achat et de déploiement (CAPEX), ainsi que d'opération et maintenance (OPEX), et empêche l'utilisation agile des ressources. En apportant le déterminisme dans les réseaux des Technologies de l'Information (IT), une nouvelle génération de réseaux commutés de l'IT va permettre l'émulation de ces liens série et la convergence de réseaux autrefois dédiés sur une infrastructure commune à base d'IP. En retour, la convergence de l'IT et de l'OT permettra de nouvelles optimisations industrielles, en introduisant des technologies héritées de l'IT, comme le BigData et la virtualisation des fonctions du réseau (NFV), en support des opérations de l'OT, améliorant les rendements tout en apportant une réduction supplémentaire des coûts. Les solutions de réseaux déterministes réclament des possibilités nouvelles de la part des équipements, possibilités qui vont bien au-delà de celles demandées pour les besoins classiques de la QoS. Les attributs-clé sont : - la synchronisation précise de tous les n'uds, en incluant souvent la source et la destination des flux- le calcul centralisé de chemins de bout en bout à l'échelle du réseau- de nouveaux filtres de mise en forme du trafic à l'intérieur comme à l'entrée du réseau afin de le protéger en tous points- des moyens matériels permettant l'accès au medium à des échéances précises. Au travers de multiples papiers, de contributions à des standards, et de publication de propriété industrielle, le travail présenté ici repousse les limites des réseaux industriels sans fils en offrant : 1. Le calcul centralisé de chemin complexes basé sur une technologie innovante appelée ARC 2. La signalisation de ces chemins complexes et la traçabilité des paquets par une extension de la technologie BIER-TE 3. Réplication, Renvoi et Elimination des doublons le long de ces chemins complexes 4. Un temps-réel basé sur un échéancier qui assure un haut taux de délivrance et garantit une latence bornée 5. La capacité de transporter à la fois des flux déterministes et du trafic IPv6 à multiplexage statistique sur un maillage 6TiSCH partagéCe manuscrit rapporte des améliorations apportées aux techniques existantes des réseaux sans fils à basse puissance (LoWPAN) comme Zigbee, WirelessHART'et ISA100.11a, afin d'amener ces nouveaux bénéfices jusqu'aux réseaux opérationnels sans fil. Elle a été implémentée en programme et sur du matériel open-source, et évaluée face à du IEEE Std. 802.15.4 classique ainsi que du 802.15.4 TSCH, utilisés en topologie maillée. L'expérience menée montre que notre nouvelle proposition permet d'éviter les à-coups et de garantir des taux élevés de délivrance, même face à des évènements exceptionnels comme la perte d'un relais ou la dégradation temporaire d'un lien radio. / Based on time, resource reservation, and policy enforcement by distributed shapers, Deterministic Networking provides the capability to carry specified unicast or multicast data streams for real-time applications with extremely low data loss rates and bounded latency, so as to support time-sensitive and mission-critical applications on a converged enterprise infrastructure.As of today, deterministic Operational Technology (OT) networks are purpose-built, mostly proprietary, typically using serial point-to-point wires, and operated as physically separate networks, which multiplies the complexity of the physical layout and the operational (OPEX) and capital (CAPEX) expenditures, while preventing the agile reuse of the compute and network resources.Bringing determinism in Information Technology (IT) networks will enable the emulation of those legacy serial wires over IT fabrics and the convergence of mission-specific OT networks onto IP. The IT/OT convergence onto Deterministic Networks will in turn enable new process optimization by introducing IT capabilities, such as the Big Data and the network functions virtualization (NFV), improving OT processes while further reducing the associated OPEX.Deterministic Networking Solutions and application use-cases require capabilities of the converged network that is beyond existing QOS mechanisms.Key attributes of Deterministic Networking are: - Time synchronization on all the nodes, often including source and destination - The centralized computation of network-wide deterministic paths - New traffic shapers within and at the edge to protect the network- Hardware for scheduled access to the media.Through multiple papers, standard contribution and Intellectual Property publication, the presented work pushes the limits of wireless industrial standards by providing: 1. Complex Track computation based on a novel ARC technology 2. Complex Track signaling and traceability, extending the IETF BIER-TE technology 3. Replication, Retry and Duplicate Elimination along the Track 4. Scheduled runtime enabling highly reliable delivery within bounded time 5. Mix of IPv6 best effort traffic and deterministic flows within a shared 6TiSCH mesh structureThis manuscript presents enhancements to existing low power wireless networks (LoWPAN) such as Zigbee, WirelessHART¿and ISA100.11a to provide those new benefits to wireless OT networks. It was implemented on open-source software and hardware, and evaluated against classical IEEE Std. 802.15.4 and 802.15.4 TSCH radio meshes. This manuscript presents and discusses the experimental results; the experiments show that the proposed technology can guarantee continuous high levels of timely delivery in the face of adverse events such as device loss and transient radio link down.

Les Réseaux de Capteurs Sans Fil (RCSF ou Wireless Sensor Network - WSN) sont l'une des technologies les plus importantes du 21ème siècle. La plupart des chercheurs et les analystes estiment que, dans un proche avenir, ces micro-capteurs seront intégrés partout dans l’environnement de notre vie quotidienne. Ces dernières années, l'Internet des Objets (Internet of Things - IoT) est également une des technologies émergentes qui se développe rapidement. Deux nouveaux standards permettent de déployer des réseaux sans fil de faible consommation énergétique connectés à internet : le protocole 6LowPAN (Low power Wireless Personal Area Networks) qui permet notamment d’apporter l’adressage IPv6 aux capteurs grâce à l’encapsulation et la compression des données et le protocole de routage RPL (IPv6 routing protocol for low-power and lossy network) qui permet à l’information de circuler dans les WSN de proche en proche à un faible coût énergétique. Bien que le développement de ces techniques soit extrêmement rapide, plusieurs problèmes causés principalement par le manque de ressources des micro-capteurs (puissance limitée de traitement, problèmes de bande passante et de connexion des liens avec perte de données, problème de ressource énergétique limitée) demeurent et doivent être résolus, notamment pour les applications agro-environnementales. / The wireless sensor network (WSN) is one of the most important technologies of the 21st century. Most researchers and technical analysts believe that in the near future, these micro-sensors will be integrated into the environment of our daily lives. In recent years, the IoT (Internet of Things) and WoT (Web of Things) technologies also have great forwarding. Especially, the IPv6 over Low power Wireless Personal Area Networks (6LoWPAN) protocol has allowed the use of IPv6 protocol stack in the field of WSN, thanks to its encapsulation and compression mechanisms in IPv6 packet header. Moreover, the RPL (IPv6 Routing Protocol for Low-power and Lossy Network) provides such a powerful routing function that can be applied for a variety of application scenarios. These two key standards of IoT and WoT technologies for WSN can be used in an IPv6 stack, and they will successfully achieve the connection between Internet and micro-sensors. Thus, due to the availability of IPv6 address (128-bit), all the communicating objects, such as smart device, sensor, and actuator, can be connected to the Internet. That is the greatest advantage brought by the IoT. Although the progress of these techniques is extremely fast, several issues caused by resource constraints of micro-sensor (limited processing power, bandwidth and lossy connection link, and energy), such as QoS, energy efficient, robustness and lifetime of WSN, and the most important, the special requirement of agricultural applications. Notice that Precision Agriculture is are still very challenging and waiting to be solved. Essentially, these open questions would dabble in the aspects like telemedicine, remote home automation, industrial control etc. Thus, the results obtained in this work will have a significant impact on both economic and scientific. Economically, it can offer a solution for WSN to support sustainable development in the field of agriculture automation. While scientifically, we will contribute to the routing protocol standardization of wireless micro-sensors in the domain of environmental monitoring.

Machine-to-machine, machine-to-man, or man-to-machine (M2M) communications is expected to grow very rapidly over the next few years with an anticipated 50 billion devices being connected to broadband connections by 2020 [35]. To be able to plan and dimension for the expected (increase) in data traffic it is important to have a model for the traffic that will flow through the network. A concept often talked about in conjunction with M2M communications is the “Internet of things”, where billions of “smart” objects are connected to the Internet and can be easily shared and used or re-used by many applications. One sub-field of M2M communications is sensor/actuator networks that are installed in households, creating automated homes by enabling home appliances to talk to each other and to applications that can be running on hosts connected to the Internet. Such sensor/actuator networks extend the uses of home appliances into completely new and exciting applications, while also potentially making homes more energy efficient by smarter management and operation of these appliances. The thesis was proposed by and carried out at Ericsson in Kista, Sweden during the summer and fall of 2009. The academic advisor was G. Q. Maguire Jr. of the Royal Institute of Technology (KTH) and industrial advisor was Per Ljungberg at Ericsson. This thesis has an industrial focus, specifically to produce models and prototypes that benefit Ericsson as a company and the Ericsson Connected Home project. This thesis has evaluated the available standards and designed, buildt, and evaluated a prototype application for one of these standards to operate with this home gateway. Additionally, the thesis should also benefit the academic world by offering tractable models for M2M traffic that have a foundation in reality, rather than solutions in search of a problem. / Maskin-till-maskin, maskin-till-man, eller man-till-maskin (M2M) kommunikation förväntas växa mycket snabbt under de närmaste åren med förväntade 50 miljarder enheter anslutna till en bredbandsuppkoppling år 2020 [35]. För att kunna planera och dimensionera för den förväntade (ökningen) i datatrafik är det viktigt att ha en modell för den trafik som kommer att flöda genom nätverket. Ett begrepp det ofta talas om i samband med M2M-kommunikation är " Internet of things ", där miljarder "smarta" objekt är anslutna till Internet och enkelt kan delas och användas på nytt sätt och av många användare. En undergrupp inom M2M-kommunikation är sensor nätverk som installeras i hushåll, för att skapa automatiserade hem där hemelektroniken kan prata med andra apparater och program som körs på datorer anslutna till Internet. Sådana sensornätverk utvidgar användningen av hushållsapparater till helt nya och spännande applikationer, samtidigt som det potentiellt göra bostäder mer energisnåla genom smartare förvaltning och drift av dessa apparater. Detta examensarbete görs på uppdrag av Ericsson i Kista, Sverige under sommaren och hösten 2009. Akademisk rådgivare är GQ Maguire Jr från Kungliga Tekniska Högskolan (KTH) och industriell rådgivare är Per Ljungberg på Ericsson. Examensarbetet har som industriellt fokus att tillverka modeller och prototyper för att modellera trafiken i Ericssons nätverk. Examensarbetets akademiska värde är genom att erbjuda lättgörliga modeller för M2M trafik som har en grund i verkligheten, snarare än lösningar på jakt efter ett problem.

Immense amounts of water are wasted daily, and it is as important as ever to optimize our water consumption, especially considering that today around 850 million people lack access to clean water. With the rise of the Internet of Things, creating a monitoring system for this purpose becomes easier, but there arises a problem of interfacing water meters to IoT capable devices.In this thesis a framework for IoT smart water monitoring is presented. Both short range and long range communication techniques are shown, compared and discussed. Similarly, different smart water meters and their characteristics are compared.The main goal of this thesis was to implement an interface between a sensor node and the water meter, ensuring the transmission of data in an easy way. To achieve this goal, a M-Bus library integrated into Contiki-OS is presented, thereby showing that it is possible to interface a water meter with a sensor node. The implemented library is capable of changing some of the configurations of the water meter, receiving data from the water meter, as well as forwarding the data via MQTT or CoAP protocols for further processing on the server side. / Stora mängder vatten slösas dagligen och det är viktigt nu att vi optimerar vattenförbrukningen, särskilt med tanke på att cirka 850 miljoner människor idag saknar tillgång till rent vatten. Med uppkomst av Sakernas Internet blir det lättare att skapa ett övervakningssystem för detta ändamål, men det finns fortfarande problem med att ansluta vattenmätare till IoT-kompatibla enheter.I detta arbete presenteras ett ramverk för smart vattenmätning med IoT. Både kortdistansoch långdistanskommunikationsteknik presenteras, jämförs och diskuteras. På samma sätt jämförs olika smarta vattenmätare och deras egenskaper.Huvudsyftet med denna arbetet var att implementera ett gränssnitt mellan en sensornod och vattenmätare, vilket säkerställer överföring av data på ett enkelt sätt. För att uppnå detta mål presenteras ett M-Bus-bibliotek integrerat i ContikiOS, vilket visar att det är möjligt att koppla en vattenmätare till en sensornod. Det implementerade biblioteket kan ändra delar av vattenmätarens konfigurering, ta emot data från vattenmätaren, samt vidarebefordra data via MQTT eller CoAP för vidare bearbetning hos servern.

Varje dag kopplas tusentals godsvagnar om på de olika rangerbangårdarna i Sverige. För att kunna automatiskt bromsa vagnarna tillräckligt mycket är det nödvändigt att veta deras hastigheter. En teknik som har blivit populär på sistone är Light Detection and Ranging (LiDAR) som använder ljus för att mäta avstånd till objekt. Den här rapporten diskuterar design- och implementationsprocessen av ett trådlöst sensornätverk bestående av en LiDARutrustad sensornod. Designprocessen gav en insikt i hur LiDAR-sensorer bör placeras för att täcka en så stor yta som möjligt. Sensornoden var programmerad att bestämma avståndet av objekt genom att använda Random Sample Consensus (RANSAC) för att ta bort outliers och sen linjär regression på de inliers som detekterats. Implementationen utvärderades genom att bygga ett litet spår med en låda som kunde glida fram och tillbaka över spåret. LiDAR- sensorn placerades med en vinkel vid sidan om spåret. Resultaten visade att implementationen både kunde detektera objekt på spåret och också hastigheten av objekten. En simulation gjordes också med hjälp av en 3D-modell av en tågvagn för att se hur väl algoritmen hanterade ojämna ytor. LiDAR-sensorn i simuleringen hade en strålavvikelse på 0_. 30% av de simulerade mätvärdena gjordes om till outliers för att replikera dåliga väderförhållanden. Resultaten visade att RANSAC effektivt kunde ta bort outliers men att de ojämna ytorna på tåget ledde till felaktiga hastighetsmätningar. En slutsats var att en sensor med en divergerande stråle möjligtvis skulle leda till bättre resultat. Framtida arbete inkluderar att utvärdera implementationen på en riktig bangård, hitta optimala parametrar för algoritmen samt evaluera algoritmer som kan filtrera data från ojämn geometri. / Every day, thousands of train wagons are coupled on the multiple classification yards in Sweden. To be able to automatically brake the wagons a sufficient amount, it is a necessity to determine the speed of the wagons. A technology that has been on the rise recently is Light Detection and Ranging (LiDAR) that emits light to determine the distance to objects. This report discusses the design and implementation of a wireless sensor network consisting of a LiDAR-equipped sensor node. The design process provided insight into how LiDAR sensors may be placed for maximum utilization. The sensor node was programmed to determine the speed of an object by first using Random Sample Consensus (RANSAC) for outlier removal and then linear regression on the inliers. The implementation was evaluated by building a small track with an object sliding over it and placing the sensor node at an angle to the side of the track. The results showed that the implementation could both detect objects on the track and also track the speed of the objects. A simulation was also made using a 3D model of a wagon to see how the algorithm performs on non-smooth surfaces. The simulated LiDAR sensor had a beam divergence of 0_. 30% of the simulated measurements were turned into outliers to replicate bad weather conditions. The results showed that RANSAC was efficient at removing the outliers but that the rough surface of the wagon resulted in some incorrect speed measurements. A conclusion was made that a sensor with some beam divergence could be beneficial. Future work includes testing the implementation in real-world scenarios, finding optimal parameters for the proposed algorithm, and to evaluate algorithms that can filter rough geometry data.

Low power and Lossy Networks (LLNs) such as wireless sensor networks are currently used in many important applications fields such as remote environment monitoring and target tracking. This deployment has been enabled by the availability, especially in recent years, of embedded micro-controller devices that are smaller and cheaper. These devices are equipped with wireless interfaces, with which they can communicate with each other to form a network. In this thesis we focus on studying the energy consumption of reliable transport protocols over LLNs. Recently, much research has been carried out to improve the reliability and the congestion control on low power networks. Some of these works have considered TCP inappropriate for this kind of networks. Indeed, the idea of deploying TCP was rejected due to its header overhead, its end-to-end retransmission mechanism, its large rate of acknowledgment, and the impact of the lower layers fragmentation on the energy consumption. Nonetheless, the use of standard TCP/IP protocols offers the advantage of a seamless connectivity between the wireless network and the Internet. TCP allows easily the use of standard applications (HTTP, SSH) for some tasks like reprogramming of nodes or firmware updates, without the need of deploying complex proxies in border routers. In the first part of this work, we study the energy consumption of TCP and the ways that reduce its energy consumption. We study one of the proposed TCP algorithms to reduce the end-to-end retransmissions cost and we propose some improvements that allow it to reduce the energy consumption. Then, we study the compression of the TCP header over low-power and lossy networks and we consider IPv6 over Low power Wireless Personnel Area Networks (6LoWPAN) as an example. We propose a new TCP header compression algorithm that reduces the TCP header size to about six bytes. In the second part, we propose a mathematical model that allows to estimate the energy consumption of wireless nodes. Using the model, we study the tradeoff between sending long and short TCP segments and their impact on the energy consumption. Finally, we study the impact of a new fragment recovery mechanism on the energy performance of TCP.

In computer networks, congestion is a condition in which one or more egressinterfaces are offered more packets than are forwarded at any given instant [1]. In wireless sensor networks, congestion can cause a number of problems including packet loss, lower throughput and poor energy efficiency. These problems can potentially result in a reduced deployment lifetime and underperforming applications. Moreover, idle radio listening is a major source of energy consumption therefore low-power wireless devices must keep their radio transceivers off to maximise their battery lifetime. In order to minimise energy consumption and thus maximise the lifetime of wireless sensor networks, the research community has made significant efforts towards power saving medium access control protocols with Radio Duty Cycling. However, careful study of previous work reveals that radio duty cycle schemes are often neglected during the design and evaluation of congestion control algorithms. This thesis argues that the presence (or lack) of radio duty cycle can drastically influence the performance of congestion control mechanisms. To investigate if previous findings regarding congestion control are still applicable in IPv6 over low power wireless personal area and duty cycling networks; some of the most commonly used congestion detection algorithms are evaluated through simulations. The research aims to develop duty cycle aware congestion control schemes for IPv6 over low power wireless personal area networks. The proposed schemes must be able to maximise the networks goodput, while minimising packet loss, energy consumption and packet delay. Two congestion control schemes, namely DCCC6 (Duty Cycle-Aware Congestion Control for 6LoWPAN Networks) and CADC (Congestion Aware Duty Cycle MAC) are proposed to realise this claim. DCCC6 performs congestion detection based on a dynamic buffer. When congestion occurs, parent nodes will inform the nodes contributing to congestion and rates will be readjusted based on a new rate adaptation scheme aiming for local fairness. The child notification procedure is decided by DCCC6 and will be different when the network is duty cycling. When the network is duty cycling the child notification will be made through unicast frames. On the contrary broadcast frames will be used for congestion notification when the network is not duty cycling. Simulation and test-bed experiments have shown that DCCC6 achieved higher goodput and lower packet loss than previous works. Moreover, simulations show that DCCC6 maintained low energy consumption, with average delay times while it achieved a high degree of fairness. CADC, uses a new mechanism for duty cycle adaptation that reacts quickly to changing traffic loads and patterns. CADC is the first dynamic duty cycle pro- tocol implemented in Contiki Operating system (OS) as well as one of the first schemes designed based on the arbitrary traffic characteristics of IPv6 wireless sensor networks. Furthermore, CADC is designed as a stand alone medium access control scheme and thus it can easily be transfered to any wireless sensor network architecture. Additionally, CADC does not require any time synchronisation algorithms to operate at the nodes and does not use any additional packets for the exchange of information between the nodes (For example no overhead). In this research, 10000 simulation experiments and 700 test-bed experiments have been conducted for the evaluation of CADC. These experiments demonstrate that CADC can successfully adapt its cycle based on traffic patterns in every traffic scenario. Moreover, CADC consistently achieved the lowest energy consumption, very low packet delay times and packet loss, while its goodput performance was better than other dynamic duty cycle protocols and similar to the highest goodput observed among static duty cycle configurations.