A hidrolipodistrofia ginóide, popularmente denominada de celulite, é caracterizada como um processo distrófico que produz alterações estruturais dos elementos presentes na pele, como: modificações no tecido conjuntivo, comprometimento da microcirculação periférica cutânea, hipertrofia e hiperplasia dos adipócitos e edema. Os flavonóides são utilizados como substâncias ativas em preparações anticelulíticas por reduzirem a permeabilidade capilar. Os objetivos estabelecidos para esta pesquisa foram: (1) desenvolver emulsões cosméticas com finalidades anticelulíticas; (2) validar metodologia analítica para o doseamento de flavonóides totais, equivalentes em rutina, por espectrofotometria na região do ultravioleta; (3) avaliar a estabilidade física, físico-química e química das formulações. Formulações cosméticas anticelulíticas foram desenvolvidas contendo o extrato vegetal comercial de Trichilia catiguá Adr. Juss (e) Ptychopetalum olacoides Bentham (Slimbuster® H1), padronizado em flavonóides totais, equivalentes em rutina, e avaliadas quanto à estabilidade física, físico-química e química. Para sua quantificação, o método espectrofotométrico na região do ultravioleta a 361,0 nm foi empregado, comparando-se com rutina padrão secundário de referência (T = 96,1%). A avaliação da estabilidade envolveu três condições distintas de temperatura (5,0 + 0,5; 24 + 2 e 40,0 + 0,5 °C), pelo período de três meses, e as variáveis analisadas foram as características organolépticas, valor de pH, viscosidade aparente e teor de flavonóides totais. A metodologia foi validada quanto à linearidade, limites de detecção e quantificação, especificidade e pesquisa de interferentes, recuperação do padrão, precisão e exatidão intra e inter-dias. Os resultados da estabilidade indicaram que o teor de flavonóides totais, equivalentes em rutina, sofreu decaimento inferior a 10% nas condições de exposição à luz solar direta e/ou indireta, à temperatura ambiente (24 + 2 °C) e de refrigerador (5,0 + 0,5 °C), sendo que a 40,0 + 0,5 °C, condição de estufa, ocorreu redução de, aproximadamente, 35%. / Gynoid hydrolipodystrophy, popularly known as cellulite, is characterized as a dystrophic process that generates structural alterations of skin elements, as: connective tissue modifications, cutaneous microcirculation abnormalities, hypertrophy and hyperplasia of adipocytes and edema. Flavonoids are employed as raw materials in anticellulitic products by their capability to reduce capillary permeability. The objectives established for this research were: (1) development of anticellulitic cosmetic emulsions; (2) analytical method validation for total flavonoids, expressed in rutin, by ultraviolet spectrophotometry; (3) physical, physicochemical and chemical stability assay for the preparations. Anticellulitic cosmetic formulations containing the Trichilia catigua Adr. Juss (and) Ptychopetalum olacoides Bentham commercial extract (Slimbuster® H1), standardized in total flavonoids, expressed in rutin, were developed and their physical, physicochemical and chemical stability was assessed. Flavonoids were quantified within the ultraviolet spectrophotometric method at 361.0 nm as rutin equivalents by comparison with secondary standard rutin (T = 96.1%). Stability assay was conducted in three temperature conditions (5.0 + 0.5; 24 + 2 e 40.0 + 0.5 °C) and the following parameters were analyzed: aspect, color and odor, pH and apparent viscosity values and flavonoid content. Analytical methodology was validated determining linearity, limits of detection and quantification, specificity and interferent assay, recovery and intra and inter-run precision and accuracy. Results from stability evaluation have indicated decrease of flavonoid content inferior than 10% at sunlight exposure (room temperature, 24 + 2 °C) and at 5.0 + 0.5 °C; high temperature (40.0 + 0.5 °C) has reduced the flavonoid content at, approximately, 35%.

O desenvolvimento e validação de métodos analíticos é um procedimento necessário quando um método não normalizado é utilizado por um laboratório de ensaios. A validação de métodos também é um requisito específico da norma ABNT NBR ISO/IEC 17025, que determina os requisitos gerais para a competência dos laboratórios de ensaio e calibração. O objetivo da validação é demonstrar que o método analítico, nas condições em que é executado, produz resultados com a exatidão requerida. O Laboratório de Corrosão, Proteção e Reciclagem de Materiais (LACOR), da UFRGS, tem o ensaio de determinação de metais por fluorescência de raios X, acreditado pelo CGCRE/INMETRO, conforme ABNT NBR ISO/IEC 17025. O ensaio é feito usando o método de espectrometria de fluorescência de raios X por dispersão de energia (EDXRF). Este método, contudo, não é normalizado e, portanto, o mesmo foi validado, neste trabalho de pesquisa, para atender a este requisito. A validação foi feita com base no documento orientativo DOQ-CGCRE-08 e no guia EURACHEM. Os parâmetros de validação, para o ensaio quantitativo por EDXRF, que foram calculados neste trabalho são: seletividade; limite de detecção (LD) e limite de quantificação (LQ); linearidade e faixa de trabalho; veracidade de medição (tendência, erro normalizado, Z-score e comparação com método de referência) e precisão (repetibilidade, precisão intermediária e reprodutibilidade). Além disso, foi desenvolvida uma metodologia de cálculo de incerteza de medição para o ensaio por EDXRF Os resultados obtidos neste estudo demonstram que o método EDXRF, usado na determinação de metais em aços, é um método não normalizado validado e compatível com os resultados obtidos com os métodos de referência: espectrometria de fluorescência de raios X por dispersão de comprimento de onda (WDXRF), fotométricos e espectrometria de absorção atômica (AAS). Inclusive, o WDXRF é um método de referência usado em muitas normas internacionais, que descrevem métodos de análise de aços por fluorescência de raios X, como ASTM E572 ou ASTM E1085. O estudo desenvolvido nesta dissertação permitiu que o LACOR mantivesse sua acreditação no ensaio de determinação de metais por fluorescência de raios X, na avaliação do CGCRE/INMETRO, no presente ano. Outros frutos deste trabalho foram a confecção das curvas de calibração do espectrômetro NITON XL3t GOLDD+ e a revisão do procedimento de ensaio, onde esses novos conhecimentos sobre a técnica EDXRF foram aplicados. Futuramente, este trabalho pode ser usado por outros pesquisadores para desenvolver estudos em outras matrizes metálicas, como cobre, alumínio, titânio ou níquel, e, também, em outras áreas de aplicação como jóias, reciclagem de materiais metálicos ou, até mesmo, para análise elementar de resíduos retidos em membranas de troca iônica. / The development and validation of analytical methods is a required procedure when a non-standard method is used by a testing laboratory. Method validation is also a specific requirement of the ABNT NBR ISO / IEC 17025, which determines the general requirements for the competence of testing and calibration laboratories. The purpose of validation is to demonstrate that the analytical method, under the conditions in which it is performed, produces results with the required accuracy. The Corrosion, Protection and Recycling Materials Laboratory (LACOR), at UFRGS, has the X-ray fluorescence metal analysis, accredited by CGCRE / INMETRO, according to ABNT NBR ISO / IEC 17025. The test is performed using Energy Dispersive X-Ray Fluorescence spectrometry, EDXRF method. This method, however, is not standardized; therefore, it was validated in this research to meet this requirement. The validation was based on the DOQ-CGCRE-08 document and the EURACHEM guide. The method performance calculated in this study for quantitative testing by EDXRF are: selectivity; limit of detection (LOD) and limit of quantification (LOQ); linearity and working range; trueness (bias, normalized error, Z-score and comparison with reference method) and precision (repeatability, intermediate precision and reproducibility). In addition, a measurement uncertainty calculation methodology was developed for the EDXRF testing The results obtained in this study demonstrate that the EDXRF method, used in the determination in the chemical analysis of steels, is a validated non-standard method and compatible with the results obtained with the reference methods: Wavelength Dispersive X-Ray Fluorescence spectrometry (WDXRF), photometric and atomic absorption spectrometry (AAS). In addition, WDXRF is a reference method used in many international standards, which describes analysis of steels by X-ray fluorescence spectrometry such ASTM E572 or ASTM E1085. The study developed in this dissertation allowed LACOR to maintain its accreditation in the test of metal by X-ray fluorescence analysis, in the CGCRE / INMETRO audit, this year. Other fruits of this work were the preparation of calibration curves of NITON XL3t GOLDD + spectrometer and complete revision of testing procedure, where this new knowledge about the EDXRF technique was applied. In the future, this work can be used by other researchers to develop studies in other base metals such as copper, aluminum, titanium or nickel, and also in other areas of application such as jewelry, recycling of metallic materials or even for analysis elemental residues retained in ion exchange membranes.

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Power transformers are essential and a large part of the asset cost structure of the electrical power system. When they present any defect or failure, it will be required high costs to repair or replace them, due their commercial costs and by the capability loss to transmit power during a period of time. Generally, transformer failure can occur as a result of the weakness insulation caused by the electrochemical processes involving the cooling liquid (oil), by vibrations due the electromagnetic forces in normal operation, i.e., steady state, and also by winding deformation as the result of short-circuits. It is expected that a transformer will experience and survive a number of short circuits during its service life. But one such event will cause some slight winding movement, which can gradually increasing and the ability of the transformer to withstand further electromechanical forces will be then reduced. It is therefore very important to check the mechanical condition of transformers periodically, particularly for older units, to provide an early warning of an impending catastrophic failure. Thus a specialist technique is required for the monitoring and assessment of mechanical condition of winding transformer. Despite designers and manufacturers, as well as the operation and maintenance technicians of power supply companies worry about this subject, new methodologies and tools to assess the strength effects as the result of short circuits in transformers are still necessaries. So, this work proposes to know the strength characteristics caused by the radial and axial forces in winding transformers. In this context, it will be presented different strengths that can occur in winding transformer, identifying the principal failures as the result of these stresses. Besides, it will be developed an analytical method to evaluate the forces and stresses in winding three phase transformer under a three phase short circuit. Finally, the analytical method results will be compared with a computer simulation based in time domain using the software FEMM, which applies the finite element method. / Transformadores de potência são equipamentos essenciais aos sistemas elétricos e também um de seus componentes de maior preço. Quando estes equipamentos se danificam ou apresentam algum tipo de falha, o seu reparo ou até mesmo sua substituição demanda altíssimos custos financeiros, tanto pelo alto valor comercial destes equipamentos como pela perda temporária da capacidade de transmissão de energia elétrica. Muitas falhas destes equipamentos devem-se à redução da suportabilidade da isolação dos seus condutores/enrolamentos causado pelos fenômenos eletroquímicos do líquido de resfriamento (óleo), pelas vibrações produzidas pelas forças eletromecânicas durante a sua operação normal, ou seja, em regime permanente, e também pelas deformações dos enrolamentos causadas pelas altas correntes de curto-circuito. Espera-se, no entanto, que um transformador suporte um determinado número de curtos-circuitos durante seu tempo de operação. No entanto, verifica-se que cada evento poderá provocar pequenos deslocamentos relativos nos enrolamentos, os quais podem aumentar cumulativamente, reduzindo desta forma a capacidade do transformador de suportar novos esforços eletromecânicos. Neste contexto, torna-se importante a verificação periódica das suas condições mecânicas, principalmente nas unidades com muito tempo de operação, de forma a se obter subsídios para impedir falhas catastróficas. O emprego de técnicas especiais é requerido para o monitoramento e avaliação das condições mecânicas do enrolamento de um transformador. Apesar de este assunto ser uma preocupação constante dos projetistas e fabricantes de transformadores, bem como dos profissionais de manutenção e operação das empresas de energia elétrica, há certa carência de metodologias e ferramentas consistentes para se avaliar os efeitos dos esforços mecânicos decorrentes das elevadas correntes transitórias sobre estes equipamentos. Nessa perspectiva, este trabalho tem por meta o entendimento das características dos esforços mecânicos causados pelas forças radiais e axiais nos enrolamentos dos transformadores. Para tanto, esta dissertação mostrará os diferentes tipos de esforços eletromecânicos passíveis de ocorrer nos enrolamentos de um transformador, identificando os principais tipos de falhas provocadas por essas solicitações. Em seguida, será desenvolvida uma metodologia analítica para estimar as forças e estresses nos enrolamentos de um transformador trifásico submetidos a um curto-circuito trifásico. Assim, os valores obtidos pela metodologia analítica serão confrontados com resultados de uma simulação computacional no domínio do tempo utilizando-se o programa FEMM baseado na técnica de elementos finitos. / Mestre em Ciências

O desenvolvimento e validação de métodos analíticos é um procedimento necessário quando um método não normalizado é utilizado por um laboratório de ensaios. A validação de métodos também é um requisito específico da norma ABNT NBR ISO/IEC 17025, que determina os requisitos gerais para a competência dos laboratórios de ensaio e calibração. O objetivo da validação é demonstrar que o método analítico, nas condições em que é executado, produz resultados com a exatidão requerida. O Laboratório de Corrosão, Proteção e Reciclagem de Materiais (LACOR), da UFRGS, tem o ensaio de determinação de metais por fluorescência de raios X, acreditado pelo CGCRE/INMETRO, conforme ABNT NBR ISO/IEC 17025. O ensaio é feito usando o método de espectrometria de fluorescência de raios X por dispersão de energia (EDXRF). Este método, contudo, não é normalizado e, portanto, o mesmo foi validado, neste trabalho de pesquisa, para atender a este requisito. A validação foi feita com base no documento orientativo DOQ-CGCRE-08 e no guia EURACHEM. Os parâmetros de validação, para o ensaio quantitativo por EDXRF, que foram calculados neste trabalho são: seletividade; limite de detecção (LD) e limite de quantificação (LQ); linearidade e faixa de trabalho; veracidade de medição (tendência, erro normalizado, Z-score e comparação com método de referência) e precisão (repetibilidade, precisão intermediária e reprodutibilidade). Além disso, foi desenvolvida uma metodologia de cálculo de incerteza de medição para o ensaio por EDXRF Os resultados obtidos neste estudo demonstram que o método EDXRF, usado na determinação de metais em aços, é um método não normalizado validado e compatível com os resultados obtidos com os métodos de referência: espectrometria de fluorescência de raios X por dispersão de comprimento de onda (WDXRF), fotométricos e espectrometria de absorção atômica (AAS). Inclusive, o WDXRF é um método de referência usado em muitas normas internacionais, que descrevem métodos de análise de aços por fluorescência de raios X, como ASTM E572 ou ASTM E1085. O estudo desenvolvido nesta dissertação permitiu que o LACOR mantivesse sua acreditação no ensaio de determinação de metais por fluorescência de raios X, na avaliação do CGCRE/INMETRO, no presente ano. Outros frutos deste trabalho foram a confecção das curvas de calibração do espectrômetro NITON XL3t GOLDD+ e a revisão do procedimento de ensaio, onde esses novos conhecimentos sobre a técnica EDXRF foram aplicados. Futuramente, este trabalho pode ser usado por outros pesquisadores para desenvolver estudos em outras matrizes metálicas, como cobre, alumínio, titânio ou níquel, e, também, em outras áreas de aplicação como jóias, reciclagem de materiais metálicos ou, até mesmo, para análise elementar de resíduos retidos em membranas de troca iônica. / The development and validation of analytical methods is a required procedure when a non-standard method is used by a testing laboratory. Method validation is also a specific requirement of the ABNT NBR ISO / IEC 17025, which determines the general requirements for the competence of testing and calibration laboratories. The purpose of validation is to demonstrate that the analytical method, under the conditions in which it is performed, produces results with the required accuracy. The Corrosion, Protection and Recycling Materials Laboratory (LACOR), at UFRGS, has the X-ray fluorescence metal analysis, accredited by CGCRE / INMETRO, according to ABNT NBR ISO / IEC 17025. The test is performed using Energy Dispersive X-Ray Fluorescence spectrometry, EDXRF method. This method, however, is not standardized; therefore, it was validated in this research to meet this requirement. The validation was based on the DOQ-CGCRE-08 document and the EURACHEM guide. The method performance calculated in this study for quantitative testing by EDXRF are: selectivity; limit of detection (LOD) and limit of quantification (LOQ); linearity and working range; trueness (bias, normalized error, Z-score and comparison with reference method) and precision (repeatability, intermediate precision and reproducibility). In addition, a measurement uncertainty calculation methodology was developed for the EDXRF testing The results obtained in this study demonstrate that the EDXRF method, used in the determination in the chemical analysis of steels, is a validated non-standard method and compatible with the results obtained with the reference methods: Wavelength Dispersive X-Ray Fluorescence spectrometry (WDXRF), photometric and atomic absorption spectrometry (AAS). In addition, WDXRF is a reference method used in many international standards, which describes analysis of steels by X-ray fluorescence spectrometry such ASTM E572 or ASTM E1085. The study developed in this dissertation allowed LACOR to maintain its accreditation in the test of metal by X-ray fluorescence analysis, in the CGCRE / INMETRO audit, this year. Other fruits of this work were the preparation of calibration curves of NITON XL3t GOLDD + spectrometer and complete revision of testing procedure, where this new knowledge about the EDXRF technique was applied. In the future, this work can be used by other researchers to develop studies in other base metals such as copper, aluminum, titanium or nickel, and also in other areas of application such as jewelry, recycling of metallic materials or even for analysis elemental residues retained in ion exchange membranes.

Cette thèse a pour but de faire le lien entre l’évolution des galaxies, leur morphologie et les processus physiques internes, notamment la formation stellaire comme le résultat du milieu interstellaire turbulent et multiphase, en utilisant les simulations cosmologiques zoom-in, les simulations des galaxies isolées et en interaction, et le modèle analytique de la formation stellaire. Dans le chapitre 1, j’explique la motivation pour cette thèse et je passe brièvement en revue le contexte nécessaire lié à la formation des galaxies et la modélisation en utilisant les simulations numériques. Tout d’abord, j’explore l’évolution de la morphologie des galaxies du type de la Voie Lactée dans la série des simulations cosmologiques zoom-in à travers l’analyse des barres. J’analyse l’évolution de la fraction des barres avec le redshift, sa dépendance en fonction de la masse stellaire et l’histoire d’accrétion de galaxies individuelles. Je montre en particulier, que la fraction de barres décroit avec le redshift croissant, en accord avec les observations. Ce travail montre également que les résultats obtenus suggèrent que l’époque de la formation des barres correspond à la transition entre une phase précoce “violente” de la formation de galaxies spirales à z > 1, pendant laquelle elles sont souvent perturbées par les fusions avec les galaxies de masse comparable ou par multiple fusions avec les galaxies de petite masse, mais aussi les instabilités violentes de disque, et une phase "séculaire" tardive à z < 1, quand la morphologie finale est généralement stabilisée vers une structure dominée par le disque. Cette analyse est présentée dans le chapitre 2. Étant donné que ces simulations cosmologiques forment trop d'étoiles trop tôt par rapport aux populations de galaxies observées, je me concentre dans le chapitre 3 sur la formation stellaire dans un échantillon de simulation de galaxies en isolation, à bas redshift, et à résolution du parsec et sous-parsec. J'étudie l'origine physique de leurs relations de formation stellaire avec les cassures, et montre que le seuil de densité surfacique pour une formation stellaire efficace peut être lié à la densité caractéristique d'apparition de turbulence supersonique. Ce résultat s'applique aussi bien aux galaxies qui fusionnent, dans lesquelles l'augmentation de la turbulence compressive déclenchée par les marées compressives les conduit au régime de sursaut de formation d'étoiles. Un modèle analytique idéalisé de formation stellaire liant la densité surfacique de gaz au taux de formation stellaire comme une fonction de la présence de turbulence supersonique et la structure associée du milieu interstellaire est ensuite présenté dans le chapitre 4. Ce modèle prédit une cassure à basse densité de surface qui est suivie par un régime de loi de puissance à haute densité dans différents systèmes en accord avec les relations de formation stellaire des galaxies observées et simulées. La dernière partie de cette thèse est dédiée à la technique alternative de zoom-in cosmologique (Martig et al. 2009) et son implémentation dans le code à raffinement de maillage adaptatif RAMSES. Dans le chapitre 5, je présente les caractéristiques de base de cette technique aussi bien que certains de nos tout premiers résultats dans le contexte de l'accrétion cosmologique diffuse. / This thesis aims at making the link between galaxy evolution, morphology and internal physical processes, namely star formation as the outcome of the turbulent multiphase interstellar medium, using the cosmological zoom-in simulations, simulations of isolated and merging galaxies, and the analytic model of star formation. In Chapter 1, I explain the motivation for this thesis and briefly review the necessary background related to galaxy formation and modeling with the use of numerical simulations. I first explore the evolution of the morphology of Milky-Way-mass galaxies in a suite of zoom-in cosmological simulations through the analysis of bars. I analyze the evolution of the fraction of bars with redshift, its dependence on the stellar mass and accretion history of individual galaxies. I show in particular, that the fraction of bars declines with increasing redshift, in agreement with the observations. This work also shows that the obtained results suggest that the bar formation epoch corresponds to the transition between an early "violent" phase of spiral galaxies formation at z > 1, during which they are often disturbed by major mergers or multiple minor mergers as well as violent disk instabilities, and a late "secular" phase at z < 1, when the final morphology is generally stabilized to a disk-dominated structure. This analysis is presented in Chapter 2. Because such cosmological simulations form too many stars too early compared to observed galaxy populations, I shift the focus in Chapter 3 to star formation in a sample of low-redshift galaxy simulations in isolation at parsec and sub-parsec resolution. I study the physical origin of their star formation relations and breaks and show that the surface density threshold for efficient star formation can be related to the typical density for the onset of supersonic turbulence. This result holds in merging galaxies as well, where increased compressive turbulence triggered by compressive tides during the interaction drives the merger to the regime of starbursts. An idealized analytic model for star formation relating the surface density of gas and star formation rate as a function of the presence of supersonic turbulence and the associated structure of the ISM is then presented in Chapter 4. This model predicts a break at low surface densities that is followed by a power-law regime at high densities in different systems in agreement with star formation relations of observed and simulated galaxies. The last part of this thesis is dedicated to the alternative cosmological zoom-in technique Martig et al. 2009 and its implementation in the Adaptive Mesh Refinement code RAMSES. In Chapter 5, I will present the basic features of this technique as well as some of our very first results in the context of smooth cosmological accretion.

Il a récemment été démontré que la glace de mer antarctique pouvait jouer un rôle significatif dans la dynamique des gaz à effet climatique (dont le dimethylsulfure ou DMS) dans les régions polaires. Ce travail s’est d’abord attaché à la mise au point d’une méthode de mesure fiable du diméthylsulfoxyde (DMSO) dans la glace de mer, supprimant les interférences générées par la production de DMS au sein de l’échantillon en réponse au choc osmotique subi lors de la fonte de l’échantillon de glace. Une procédure de détermination séquentielle du DMS, par broyage à sec, puis du dimethylsulfoniopropionate (DMSP) et du DMSO sur le même échantillon de glace a été développée et utilisée à large échelle dans ce travail. Les données du présent travail ont été acquises dans le cadre de deux programmes d’observation intégrés menés sur la glace de mer antarctique à des saisons différentes mais avec une méthodologie commune :1) choix de sites d’étude homogènes afin de minimiser l’impact de la variabilité spatiale sur l’interprétation des résultats dans une optique d’évolution temporelle et 2) priorité à la caractérisation du cadre physico-chimique (texture, température, salinité, couvert de neige, susceptibilité au drainage des saumures,….) avant toute autre analyse. L’étude menée dans le cadre du programme ISPOL (nov.–dec. 2004) a permis d’observer que la stratification des saumures a un impact positif sur la conversion du DMSP en DMS au sein de la glace mais ralentit les flux de DMS et DMSP vers l’océan. Le couvert de glace est caractérisé à cette période de l’année par une perte nette de DMSP et génère des flux combiné de DMS et DMSP du même ordre de grandeur que les flux de DMS atmosphériques mesurés dans le cadre d’autres études. L’étude menée dans le cadre du programme SIMBA (sept.–oct. 2007) a permis de mettre en évidence l’importance du forçage atmosphérique sur le régime thermique et la dynamique du DMS/P/O dans la glace. Les communautés d’algues de surface produisent de fortes concentrations de DMS/P/O en réponse au stress thermique, osmotique et potentiellement radiatif durant les périodes de refroidissement et la mise en place d’un régime soutenu de drainage des saumures contribue à évacuer périodiquement les hautes concentrations de DMS/P/O produites dans la glace vers l’océan sous-jacent. Le couvert de glace affichant une production nette de DMS/P/O à cette période de l’année génère des flux combinés de DMS et DMSP plus de dix fois supérieurs à ceux observés pour la glace estivale. L’étude menée sur de la glace artificielle a permis de mettre en évidence l’impact des processus physico-chimiques sur la signature en gaz de la glace en croissance constituant un premier pas vers la modélisation des transports de gaz dans la glace de mer et leurs échanges au travers des interfaces glace-océan et glace-atmosphère. <p><p><p>SUMMARY - It has recently been demonstrated that Antarctic sea ice recently demonstrated plays a potentially significant role in the dynamics of climatically significant gases (amongst which dimethylsulphide or DMS) in Polar Regions. This research work has initially focused on the development of a reliable method for the determination of dimethylsulphoxide (DMSO) within sea ice, avoiding interferences generated by DMS production within the sample in response to the osmotic shock caused by melting. A sequential determination procedure of DMS, dimethlsulphoniopropionate (DMSP) and DMSO on the same ice sample has been developed and used on a large amount of samples in the present work. Data presented in this research project have been collected in the framework of two integrated sea ice observation programs focused on Antarctic sea ice at different seasons but following a common approach: 1) choice of homogeneous study sites to minimize the impact of spatial variability on the interpretation of the results in a time series perspective and 2) priority given to the characterization of the physicochemical framework (texture, temperature, salinity, snow cover, susceptibility to brine drainage,…) prior to any other study. The study conducted in the framework of the ISPOL experiment (Nov.–Dec. 2004) demonstrated that stratification of the brine inclusions network positively influenced the conversion of DMSP into DMS but decreased fluxes of DMS and DMSP towards the ocean. The ice cover at that time of the year is characterised by a net DMSP loss and generates combined DMS and DMSP fluxes whose values fall in the range of atmospheric DMS flux from sea ice measured in the frame of other studies. The study conducted in the framework of the SIMBA experiment (sept.–oct. 2007) emphasized the importance of atmospheric thermal forcing on the sea ice thermal regime and DMS/P/O dynamics. The surface community of algae produced elevated levels of DMS/P/O in response to thermal, osmotic and potentially radiative stress during periods of atmospheric cooling while the development of an intense brine drainage regime contributed to periodically release the elevated levels of DMS/P/O produced in the sea ice towards the underlying ocean. The ice cover exhibited at that time of the year a net production of DMS/P/O and produced combined DMS and DMSP fluxes more than ten times higher than those observed for summer sea ice. The study conducted on laboratory prepared growing sea ice emphasised the impact of physicochemical processes on the gas signature of growing sea ice and represents a first step towards modelling gas exchanges within sea ice and across its interfaces with the ocean and the atmosphere.<p> / Doctorat en Sciences agronomiques et ingénierie biologique / info:eu-repo/semantics/nonPublished

The diploma thesis "Valuation of property type resort" deals with both the development of a comprehensive register of all immovable property, forming part of the accessories and recreational area in “Zubří” and also with the valuation of these assets, which will result in the determination of prices that should be required when its sale. The issue of valuation is not easy and extends into several areas. The first part of this work, the theoretical part, focuses on the definition and clarification of basic terms as from the field of valuation same as the terms of the law and economics. It further, various valuation methods are described in more detail and these are then used in the practical part. At the beginning of the practical part the location of the real estate same as the results of a market analysis and data obtained from the local investigation are described briefly. The results of the valuation are evaluated and analyzed in more detail in the conclusion of the thesis.

The master´s thesis deals with analysis of the investment project insert investment in administrativ building for owner. Based on the decision whether it is appropriate to sell or lease the property, either in an existing state, or reconstructed. I describe the methodologies calculations methodologies and necessary concepts for their understanding of the concepts in the theoretical part. The practical part I can divide into administrative, market valuation methodology, the resulting values and use of the outputs in the analysis of real estate.

De nombreux liquides subissent un changement de volume lorsqu'ils gèlent. Pour l'eau et certaines solutions aqueuses, l'expansion volumétrique au cours de la solidification peut entraîner une série de problèmes mécaniques. Dans l'industrie automobile, l'expansion de changement de phase (ECP) met en cause la sécurité des réservoirs des véhicules aux saisons froides. Une des questions les plus problématiques est l'expansion de la solution aqueuse d'urée (SAU) dans le réservoir du système SCR des véhicules diesels. Lorsque le liquide gèle, les composants intérieurs ainsi que le réservoir lui-même peuvent être endommagés dû à la pression apportée par la dilatation du liquide solidifié. Dans le centre , une méthode numérique est fortement attendue afin de prévoir la répartition de la température, des contraintes ainsi que de la déformation des composants lors d'un processus de solidification. Du fait que les informations sur la solution d'urée restent limitées, la structure de la glace cristalline ainsi que ses comportements mécaniques sont principalement passés en revue. La préférence d'orientation de croissance des grains de glace à l'interface de cristallisation met en évidence, l'hypothèse de l'ECP non-isotropique pour des problèmes de solidification. Une série de tests mécaniques a été réalisée afin d'obtenir les propriétés basiques de SAU à l'état solide à différentes températures. Une méthode « différence-volume » a été appliquée pour mesurer la variation de la densité de la SAU lors du processus de solidification. Pour la suite, des études analytiques thermiques et mécaniques sont effectuées. Pour l'aspect thermique, le problème classique de Stefan est passé en revue. Un schéma de différence-finie est proposé et il permet de calculer la position de l'interface et les profils de température pour un modèle sphérique. Pour l'aspect mécanique, un modèle sphérique similaire est établi à la base de l'ECP non-isotropique. Les solutions analytiques des contraintes et de la pression liquide sont présentées en fonction de la position de l'interface. Une méthode éléments-finis thermo-mécaniquement couplée est développée afin de simuler efficacement les contraintes thermiques, les déformations et la pression liquide dans un problème de solidification avec des relations constitutives de comportement non-linéaires. Les contraintes thermiques sont calculées en chaque point d'intégration en résolvant les équations elasto-viscoplastiques avec l'ECP non-isotropique. Le problème aux limites est résolu par la méthode de Newton-Raphson. Cette procédure est implémentée dans le package Abaqus via un UMAT. La méthode est validée d'abord pour les aspects algorithmiques par les solutions analytiques, puis pour les paramètres de comportement retenus par une série de tests expérimentaux. De plus, une étude de cas réaliste sur un réservoir de la SAU est introduite. Les avantages et les limitations de la méthode numérique lors d'une application sont évalués. / Many liquids involve a change in volume when they freeze. For water and some aqueous solutions, the volumetric expansion during solidification may invoke a series of mechanical issues. In automobile industries, the security of tanks installed in vehicles is challenged by the Phase-Change Expansion (PCE) of the freezing liquid in cold conditions. One of the most problematic issues is the expansion of Aqueous Urea Solution (AUS) in the SCR tank of diesel vehicles. As the liquid freezes, interior components may be deformed under the stress or pressure of the expanding AUS, potentially leading to failures of the storage tank. In the product center, a numerical method is of high demand to perform thermo-mechanical analysis to predict the temperature and stress distribution during a liquid solidification process in their tanks. In this work, a bibliographic study is carried out first on the basic knowledge of the ice and AUS. Due to the very limited information on urea solution in the literature, the structure and behaviors of freshwater ice are mainly reviewed. The grain orientation preference at the growth interface of polycrystalline ice provides the evidence of non-isotropic PCE for the solidification problem. A series of mechanical tests have been performed to characterize the basic properties of the solidified AUS at different temperatures. The density evolution is measured using a volume-difference method. Then, both thermal and mechanical analytical studies are performed. The classical thermal Stefan problem is reviewed and a finite-difference scheme is proposed to calculate the interface position and temperature profiles of a spherical solidification model. Mechanically, a similar spherical model is established based on the non-isotropic PCE phenomenon of ice growth. The solutions of stress distribution and liquid pressure evolution are given as a function of the solidification interface position. Finally, an efficient thermo-mechanical FEM is proposed to evaluate the thermal stress, strain, displacement and pressure in solidification problems with highly nonlinear relations. Three particular methods for treating the liquid phase with fixed-grid approaches are introduced. The thermal stress is computed at each integration point by integrating the elasto-viscoplastic constitutive equations with non-isotropic PCE. Then, the boundary value problem is solved using the full Newton-Raphson method. This procedure is implemented into the FE package Abaqus via a UMAT subroutine. The numerical model is validated first for the algorithmic aspect by the analytical solutions, and then for the parametric calibration by a series of benchmark tests. In the end, a realistic study case on a real-size AUS storage tank is introduced. Advantages and limitations of the numerical method in the application are evaluated.

Diploma thesis “Property valuation type of summer camp” is focused on recording and valuation of all the immovable property, which are parts and outbuildings of summer camp near the Vranov dam. Theoretical part of this thesis deals with basic terminology and utilized valuation methods. Short locality characterization and relevant real estate market are described in the practical part. Main focus of the practical part is actual valuation of immovable property using methods described in theoretical part. After that, calculated and estimated prices are evaluated and analyzed.