No / In this work, a reverse osmosis (RO) desalination process operating under batch mode is considered experimentally. The effect of operating parameters, such as pressure and feed salinity on the permeate quantity and salinity is evaluated. In addition, the water permeability constant, Kw, which is one of the main parameters that affect the optimal design and operation of RO processes is evaluated as a function of changing feed salinity and pressure using the experimental data and two literature models. A strong pressure dependence of the water permeability constant is observed in line with earlier observations. Interestingly, a strong concentration dependence of the water permeability constant is also observed which has always been neglected or ignored in the literature. Finally, for a given pressure, concentration dependent correlations for Kw are developed and are used in the full process model (described by a system of ordinary differential and algebraic equations) for further simulation studies and to validate the experimental results.

Yes / The performance of a batch reverse osmosis (RO) desalination process in terms of permeate quantity and salinity as a function of feed pressure and feed salinity is evaluated by using laboratory experiments and process modelling. Special attention is paid to the water and salt permeability constants (Kw, Ks) which affect the permeate and salt flux across the membrane. Kw and Ks are found to be strongly pressure-dependent for the batch system which is in-line with earlier observations for continuous RO systems. However, the most important findings of this work are the dependence of Kw and Ks on feed salinity, something that have never been observed or reported in the literature. In order to better qualify these observations, further experiments with the batch system are conducted with a constant feed salinity so that the operating condition resembles that of a continuous RO process.

/uni/global im AFS Superskalares Rechencluster Neuer Dienst: Archivieren von Publikationen Das Batch-System DQS Neues vom Parallelrechner Softwareverteilung per WWW Software-News

Fuel wood cutting, collection and distribution in recent years have been one of the booming industries in Nigeria. Plagued with the problem of energy for domestic use, more than two third of Nigerians residing in the rural areas wholly depend on fuel wood energy for their household activities; cooking, heating and generation of warmth. A consumption put at  43 million metric tons, (43 x 109 kg) per annum giving a per capita consumption of about 511.2 kg / person per anum for rural dwellers and 360 kg / person for urban settlers. An enormous use of fuel wood at this large scale poses a grave and devastating environmental side effect, notably being deforestation and desertification now eating deep into the heart of Nigerian Forest cover at a very alarming rate. (Bugaje 2004). Akinbami et al 2001’s assessment has identified feed stock substitute for an economically feasible biogas programme, a substitute for wood fuel, and Nigeria produces 227,500 tons (2.275 x 108 kg ) of fresh animal wastes daily. According to the study, 1 kilogram (kg) of fresh animal waste produces about 0.03 m3 gas, hence, Nigeria can produce about 6.8 million m3 of biogas everyday, enough to meet the cooking need of an average family size, an annual equivalent put at 4.81 million barrels crude oil, or 6.9 x 106 tons of fuel wood (Adeoti et al, 2001). This work is aimed at Evaluating Using Quantitative and Comparative Data analysis, a Batch System, Small Scale family size bio digester; The possible volume of gas that could be produced as against the same quantity of wood consumed, the estimated amount of fuel wood in kg that could be avoided, and the forested land that could be conserved by the substitution.   From the result obtained, the conservable fuel wood for a family size of say 7 could range from 11.524 kg/day when substituted with the equivalent quantity of gas (2.3048 m3), while CO2 avoidable from tree felling in the chosen region could range close to 1,540,000kg (1,540 metric tons per annum). / <p>2008-10-09</p>

/uni/global im AFS Superskalares Rechencluster Neuer Dienst: Archivieren von Publikationen Das Batch-System DQS Neues vom Parallelrechner Softwareverteilung per WWW Software-News

Made available in DSpace on 2015-05-14T13:21:37Z (GMT). No. of bitstreams: 1 parte1.pdf: 2426440 bytes, checksum: ed3c18b465357e2c561cffbd380b983f (MD5) Previous issue date: 2008-07-25 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES / The chemiluminescence (CL) of luminol-cobalt(II) reaction has been used in analytical systems for capillary electrophoresis, chromatography, -TAS (microTotal Analysis System), etc. Even with the diversity of applications, the steps of this reaction have not been completely elucidated and have been still a subject of research and controversy. Many works reported only to the isolated studies of the influence of each variable in the luminol-cobalt(II) reaction and, as such studies do not consider the interactions among variables, they do not exploit the total performance of this reaction in order to increase the chemiluminescent intensity (ICL). In this context, the use of an experimental design and a ChemiLumimetric Flow-Batch System (CLFBS) is proposed in this work in order to study and to optimize this reaction, aiming at to develop an automatic method to determine vitamin B12 (VB12) in drugs. For optimization purpose, a 24 factorial design was carried out fixing the cobalt concentration at 3.0 g L-1 and varying the concentration of luminol, hydrogen peroxide, sodium hydroxide and the order of mixture of these reagents. Sixteen assays were performed in five replicates, generating a total of eighty experiments. The analysis using normal plot of the experimental design revealed that the luminol concentration and the order of mixture of the reagents are variables more important than the NaOH or H2O2 concentrations to luminol-cobalt(II) reaction. These two parameters were responsible to enhance the chemiluminescent signal in about 80%. Another study was carried out in order to evaluate the CLFBS performance by using the optimized variables which were suggested by the factorial design study. Calibration curves were built by using standard solution of Co(II) and VB12 and the analytical parameters for Co(II) curve were: ΔICL = -21.39 +1771.37[Co2+] (r2 = 0.9996), LD and LQ = 12.0 ng L-1, RSD = 1.8% (n = 5), analytical sensitivity = 1947.29 W/g L-1; and VB12 curve were: ΔICL = -186.71 + 12.90 [VB12] (r2 = 0.9999), LD = 14.53 mg L-1 and LQ = 14.70 mg L-1, RSD = 2.1% (n = 4) and analytical sensitivity = 10.76 W/μg L-1. The results of the vitamin B12 analysis in drug samples employing the luminol-cobalt(II) reaction and CLFBS were enough satisfactory. Relative errors smaller than 4% were obtained by using curve calibration or standard addition method. The recovery studies yield very good values, which were of 97 to 103%. In addition, a good agreement was obtained when a drug sample was analyzed by the proposed and the reference (HPLC) method. Thus, the automatic chemilumimetric method, which was here developed and optimized, can be considered a promising alternative to quality control of vitamin B12 in drugs. / A quimiluminescência (QL) da reação luminol-cobalto(II) vem sendo empregada em sistemas analíticos de eletroforese capilar, cromatografia, -TAS (microTotal Analysis System), etc. Mesmo com a diversidade de aplicações, essa reação possui etapas pouco elucidadas que continuam sendo alvo de pesquisas e polêmicas. Muitos trabalhos relatam apenas estudos isolados da influência de cada variável na reação luminol-cobalto(II) e, por não considerar as interações entre as variáveis, estes estudos não exploram ao máximo a performance analítica desta reação. Neste contexto, foi proposto neste trabalho o uso de um planejamento experimental e de um Sistema Quimilumimétrico Fluxo-Batelada (SQLFB) para o estudo e a otimização desta reação com vista a desenvolver um método automático para a determinação de vitamina B12 (VB12) em medicamentos. Na otimização, foi utilizado um planejamento fatorial 24 em que foi mantido constante a concentração de cobalto(II) em 3,0 g L-1 enquanto variou-se as concentrações de luminol, peróxido de hidrogênio, hidróxido de sódio e a ordem de mistura destes constituintes. Foram efetuados dezesseis ensaios em quintuplicata, perfazendo um total de 80 experimentos realizados. A análise usando o gráfico normal do planejamento experimental revelou que a concentração de luminol ([Lu]) e a ordem da mistura (OM) dos reagentes são variáveis mais importante do que a concentração de NaOH e H2O2 para a reação luminol-cobalto(II). Ambas variáveis [Lu] e OM foram responsáveis por aumentar o sinal quimiluminescente em cerca de 80%. Um outro estudo foi realizado para avaliar a performance do SQLFB, empregando as variáveis otimizadas que foram sugeridas pelo estudo do planejamento fatorial. Curvas de calibração foram construídas utilizando soluções padrão de Co(II) e de VB12 e os parâmetros analíticos para a curva Co(II) foram: ΔIQL=-21,39+1771,37[Co2+](r2 = 0,9996), LD=1,54 ng L-1 e LQ=5,13 ng L-1, DPR=1,8% (n=5) e sensibilidade analítica=1947,29 Watts/μg L-1; e para a curva VB12 foram: ΔIQL= -186,71 + 12,90[VB12] (r2 = 0,9999), LD=0,89 μg L-1 e LQ = 2,98 μg L-1, DPR=2,1% (n=4) e sensibilidade analítica=10,76 Watts/μg L-1. Os resultados obtidos nas análises de vitamina B12 em medicamentos empregando a reação luminol-cobalto(II) e o SQLFB foram bastante satisfatórios. Erros relativos menores do que 4% foram obtidos empregando as técnicas de curva de calibração e de adição de padrão. Em estudos de recuperação, os valores foram também muito bons, ficando entre 97 e 103%. Além disso, uma boa concordância entre os resultados foi obtida quando uma amostra foi analisada empregando o método aqui proposto e o método de referência (HPLC). Portanto, o método quimilumimétrico automático aqui desenvolvido e otimizado pode ser considerado uma alternativa promissora para o controle de qualidade de vitamina B12 em medicamentos.

Submitted by ANA KARLA PEREIRA RODRIGUES (anakarla_@hotmail.com) on 2017-07-31T12:10:23Z No. of bitstreams: 1 arquivototal.pdf: 5468289 bytes, checksum: dc45efa53e8cc6251d00164b611309f9 (MD5) / Made available in DSpace on 2017-07-31T12:10:23Z (GMT). No. of bitstreams: 1 arquivototal.pdf: 5468289 bytes, checksum: dc45efa53e8cc6251d00164b611309f9 (MD5) Previous issue date: 2016-05-25 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES / In the last decade, the extraction magnetic solid phase (MSPE) has been intense study target in Analytical Chemistry, mainly because of its potential application in sample preparation. Recently, with the development motivation automatic analytical methods, this technique has been combined with flow systems. However, the synergistic integration of MSPE with these systems is still a challenge, especially when it involves the handling of viscous matrices. In this perspective, this thesis proposes the development of an effective automated method to perform the MSPE in aqueous and oily matrices. For be applied as magnetic adsorbent nanoparticles of Fe3O4 coated with alumina and functionalized with sodium dodecyl sulfate (SDS) and 1-(2-pyridylazo)-2-naphthol (PAN) were synthesized. The nanoparticles were characterized by diffraction analysis X-ray and scanning electron microscopy, where it was confirmed that the method used to obtain the particles was adequate. Secondly, the automatic system to run the MSPE was developed. To this end an extraction chamber was made of Teflon with a quartz window on the side, where all steps of MSPE was performed without the need for any auxiliary apparatus for immobilizing the adsorbent. For generating the magnetic field in the extraction chamber, a robotic device has been developed. After these steps, the applicability of the method was demonstrated in the extraction and preconcentration of Cd and Pb in drinking water samples and Cd in edible oils, using as detection atomic absorption spectrometry graphite furnace. Factors affecting MSPE, such as pH, the amount of adsorbent, the type and concentration of the eluent and the elution time were studied. In the best experimental conditions to the sample water, the detection limit was 0.004, and 0.043 ug L-1 for Cd and Pb, respectively. Even in this array, relative standard deviations less than 3.5% were achieved with a 15-fold enrichment factor for both analytes. In the case of determination of Cd in edible oils, detection limit (0.006 ug L-1) and standard deviation (< 3.3%) was obtained satisfactorily with a 9-fold enrichment factor. Interfering studies have been performed successfully for the two determinations, not revealing significant percentage interference in determinations. The developed automatic method is simple and robust since it does not require immobilization of the adsorbent, and was successfully applied in the determination of Cd and Pb in drinking water samples and Cd in edible oils. / Na última década, a extração em fase sólida magnética (MSPE) tem sido alvo de intenso estudo na Química Analítica, principalmente em virtude do seu potencial de aplicação no preparo de amostras. Recentemente, tendo como motivação o desenvolvimento de métodos analíticos automáticos, essa técnica vem sendo combinada aos sistemas em fluxo. Contudo, a integração sinérgica da MSPE com esses sistemas ainda é um desafio, principalmente quando envolve a manipulação de matrizes viscosas. Nessa perspectiva, a presente tese propõe o desenvolvimento de um eficiente método automático para realização da MSPE em matrizes aquosas e oleosas. Para serem aplicadas como adsorvente magnético foram sintetizadas nanopartículas de Fe3O4 revestidas com alumina e funcionalizadas com dodecil sulfato de sódio (SDS) e 1-(2-piridilazo)-2-naftol (PAN). As nanopartículas foram caracterizadas através da análise de difratometria de raios-X e da microscopia eletrônica de varredura, onde confirmou-se que o método empregado para obtenção das partículas foi adequado. Num segundo momento, o sistema automático para executar a MSPE foi desenvolvido. Para isso, uma câmara de extração foi confeccionada em Teflon, com uma janela de quartzo na lateral, onde todos os passos da MSPE foram realizados sem a necessidade de qualquer aparato auxiliar para imobilizar o adsorvente. Para geração do campo magnético, na câmara de extração, um dispositivo robótico foi desenvolvido. Depois de estabelecida essas etapas, a aplicabilidade do método foi demonstrada na extração e preconcentração de Cd e Pb em amostras de água de abastecimento e de Cd em óleos comestíveis, empregando como detecção a espectrometria de absorção atômica em forno de grafite. Fatores que afetam a MSPE, tais como o pH, a quantidade de adsorvente, o tipo e a concentração do eluente e o tempo de eluição foram estudados. Nas melhores condições experimentais, para a amostra água, o limite de detecção foi 0,004 e 0,043 μg L-1 para o Cd e o Pb, respectivamente. Ainda nessa matriz, desvios padrão relativos menores que 3,5 % foram alcançados com um fator de enriquecimento de 15 vezes para ambos os analitos. No caso da determinação de Cd em óleos comestíveis, limite de detecção (0,006 μg L-1) e desvio padrão relativo (< 3,3 %) satisfatório foi obtido com um fator de enriquecimento de 9 vezes. Os estudos de interferentes foram realizados com êxito para as duas determinações, não revelando interferência percentual significativa nas determinações. O método automático desenvolvido é simples e robusto, uma vez que não requer a imobilização do adsorvente, e foi aplicado com sucesso na determinação de Cd e Pb em amostras de água de abastecimento e de Cd em óleos comestíveis.