A Fotoquimioterapia (FQT) vem sendo usada no tratamento de várias doenças, inclusive câncer, com a vantagem de ser menos agressiva, possuindo efeitos colaterais negativos desprezíveis. Esta técnica envolve a combinação de uma fonte de luz visível e de um fotossensibilizador (FS), que é reativo apenas sob a irradiação com luz adequada, e que se acumula preferencialmente no tecido doente. Uma ideia para deixar essa técnica mais eficiente é potencializar esta última característica do FS com uso de um carreador que tenha afinidade com tecidos doentes. Pensamos na hipótese de usar a albumina do soro como carreador uma vez que ela é uma proteína intrínseca do organismo, tem alta afinidade com os tecidos tumorais e possui sítios para ligar vários compostos extrínsecos. Como modelo usamos a albumina de soro bovino (ASB). Como FS utilizamos acridina laranja, nitrofurantoína, corantes ciânicos com dois cromóforos e protoporfirina IX (PpIX) sintética e extraída de glândulas Harderianas de ratos da linhagem Wistar (PpIX endógena). Foram analisadas as características de ligação entre os FS e a ASB e seus efeitos nas características fotofísicas dos FS em função da sua estrutura, utilizando espectroscopias de absorção ótica, fluorescência estática e resolvida no tempo e a técnica de microscopia de imagens por tempo de vida da fluorescência (FLIM). Foi mostrado que a ligação com ASB induz ao deslocamento batocrômico dos espectros de absorção e da fluorescência, aumentando a intensidade e o tempo de vida de fluorescência dos FS. Características como carga positiva, estrutura linear e tamanho pequeno da molécula do FS favorecem sua ligação com a ASB. Uma comparação entre PpIX sintética e endógena mostrou que a formação de um complexo da PpIX com estruturas anfifílicas também aumenta a probabilidade da sua ligação com a ASB. Os resultados obtidos mostraram que a ASB se liga efetivamente aos FS de diferentes estruturas e pode ser usada como carreador dos mesmos para tecidos tumorais. / Photochemotherapy (PCT) is used for the treatment of various diseases, including cancer, with the advantage of being less aggressive with reduced adverse effects. This technique includes the use of a visible light source and a photosensitizer (PS), which is reactive only under light exposure and localizes preferably in abnormal tissues. To make this technique more efficient it is necessary to increase the PS content in these tissues using a carrier which possesses affinity with these tissues and is able to bind PS. A good opportunity is to use serum albumin as a carrier since it is an intrinsic protein, has high affinity to tumor tissues and possesses sites for binding of various extrinsic compounds. In this work the bovine serum albumin (BSA) was used as a carrier model. Acridine orange, nitrofurantoin, cyanine dyes with two chromophores and protoporphyrin IX synthetic and extracted from Harderian glands of Wistar line rats (endogenous) were used as PS. The characteristics of the PS binding with BSA and the effect of this interaction on PS photophysical properties were studied using optical absorption, steady-state and time resolved fluorescence spectroscopies, and fluorescence lifetime image microscopy (FLIM). It was demonstrated that PS binding with BSA produces a bathochromic shift in the PS absorption and fluorescence spectra and increases its fluorescence intensity and lifetime. The positive charge, linear structure and small size of the PS molecule favors its binding with BSA. A comparison between synthetic and endogenous PpIX demonstrates that complexation of PpIX molecule with an amphiphilic structure increases the probability of its binding with BSA. The obtained results demonstrate that BSA binds effectively PS with different molecular structures and it is promising for their transport to tumor tissue.

A nanociência e a nanotecnologia vêm abrindo inúmeros desenvolvimentos de dispositivos e sistemas em escala nanométrica, com novas organizações moleculares, propriedades e funções distintas. Nesse contexto, as nanopartículas magnéticas poliméricas são compósitos formados por materiais magnéticos com tamanhos de partículas entre 1 e 100 nm combinados com polímeros funcionais. São materiais bem conhecidos e têm sido amplamente estudados devido às suas aplicações em diversas áreas tecnológicas. Nas áreas biológica e médica, as aplicações incluem separação e imobilização de enzimas e proteínas, melhoria nas técnicas de imagem de ressonância magnética para diagnóstico e sistemas de liberação controlada de fármacos. Neste trabalho, proteínas foram imobilizadas na superfície de um biopolímero combinado com partículas superparamagnéticas de magnetita para formar o compósito magnético. Utilizou-se o biopolímero quitosana, reticulada e funcionalizada com glutaraldeído, aplicável em ensaios biológicos. Obtiveram-se 3 tipos de compósitos magnéticos, os quais foram nomeados QM1Glu, QM2NaGlu e QM3Glu. Foram caracterizados por difratometria de raios X, microscopia eletrônica de varredura, magnetometria de amostra vibrante, calorimetria exploratória diferencial, termogravimetria e espectroscopia por infravermelho. Foram avaliados quanto à imobilização das proteínas albumina de soro bovino (SAB), colágeno e tripsina. A imobilização das proteínas no biopolímero ocorreu em 30 min de incubação. O compósito magnético de quitosana não funcionalizada (QM3) também foi avaliado. Para a tripsina verificou-se que QM3 apresentou maior potencial de imobilização do que QM3Glu. Após 30 dias, QM3-Trip e QM3Glu-Trip ainda apresentavam a tripsina ativada. Foram demonstradas a atividade e a cinética enzimática da QM3Glu-trip com o substrato BApNA. / Nanoscience and nanotechnology have opened up numerous developments of devices and systems on the nanometer scale, with new molecular organization, properties and functions. In this context, the polymeric magnetic nanoparticles are composites formed by magnetic materials with a particle size between 1 and 100 nm combined with functional polymers. They are well-known and have been widely studied because of its applications in various technology areas. Applications on the biological and medical areas include separation and immobilization of enzymes and proteins, improved techniques of magnetic resonance imaging and diagnostic systems for controlled drug delivery. In this work, proteins were immobilized on the surface of a biopolymer combined with superparamagnetic particles of magnetite. The biopolymer chitosan was used, cross-linked and functionalized with glutaraldehyde, applicable to the biological assays. Three types of magnetic composites were obtained, which were called QM1Glu, QM2NaGlu and QM3Glu. They were characterized by X-ray diffraction, scanning electron microscopy, vibrating sample magnetometry, differential scanning calorimetry, thermogravimetry and infrared spectroscopy. They were evaluated concerning the immobilization of the proteins bovine serum albumin (BSA), collagen and trypsin. The study showed that the immobilization of proteins on the biopolymer occurred in 30 min of incubation. The magnetic composite of nonfunctionalized chitosan (QM3) was also evaluated. For trypsin, it was found that the immobilization potential of QM3 was higher than that observed for QM3Glu. After 30 days, the trypsin of the QM3-Trip and QM3Glu-Trip was still with activity. The activity and the enzyme kinetics of the QM3Glu-Trip with the substrate BApNA were demonstrated.

A conjugação por polietilenoglicol (PEG) mascara a superfície das proteínas e aumenta o tamanho molecular do polipeptídio, reduzindo assim sua ultrafiltragem renal, impedindo a aproximação de células processadoras de antígenos ou anticorpos e reduzindo a degradação por enzimas proteolíticas. O PEG transfere para as moléculas suas propriedades físico-químicas e, conseqüentemente, modifica também a biodistribuição e a solubilidade de drogas peptídicas e não peptídicas. As soluções de proteínas são facilmente desnaturadas (muitas vezes irreversivelmente) pelo aparecimento de numerosos eventos que podem afetar a estabilidade das soluções, tais como: aquecimento, agitação, congelamento, mudanças no pH e exposição a interfaces ou agentes desnaturantes, resultando geralmente na perda da eficácia clínica e aumento do risco de efeitos colaterais adversos. A solução prática para o dilema da estabilidade da proteína é a remoção da água. A liofilização é o método mais comumente utilizado para a preparação de proteínas desidratadas, as quais, teoricamente, devem apresentar uma estabilidade adequada por um longo período de armazenagem em temperaturas ambientes. A proteína utilizada neste estudo foi a albumina sérica bovina (BSA), amplamente estudada no campo da bioquímica. Através da espectroscopia Raman associada com análise térmica por DSC, análise colorimétrica, e a determinação do teor de umidade, verificou-se que o congelamento rápido (30 °C/min.) favoreceu a manutenção da estrutura conformacional da proteína após a liofilização, porém aumentou o tempo de secagem primária em sete horas em relação ao congelamento lento (2,5 °C/min.). Após a modificação da albumina bovina por reação com o metoxi-PEG verificou-se que a BSA-PEG (1:0,25) apresentou um menor grau de alteração estrutural e conseqüentemente uma menor variação das características físico-químicas, além de otimizar as condições de liofilização e armazenamento da proteína quando comparada com a BSA-PEG (1:0,5) . / PEG conjugation masks the proteins surface and increases the molecular size of the polypeptide, thus reducing its renal ultrafiltration, preventing the approach of antibodies or antigen processing cells and reducing the degradation by proteolytic enzymes. The PEG conveys to molecules its physico-chemical properties and therefore modifies also biodistribution and solubility of peptide and non-peptide drugs. This property opens new techniques in biocatalysis and in pharmaceutical technology where many insoluble drugs are solubilized by PEG conjugation and thus more easily administered. Aqueous protein solutions are readily denatured (often irreversibly) by numerous stresses arising in solution, e.g., heating, agitation, freezing, pH changes, and exposure to interfaces or denaturants, usually resulting in lost of clinical efficacy and increase the risk of adverse side effects. Even if its physical stability is maintained, a protein can be degraded by chemical reactions (e.g., hydrolysis and deamidation), many of which are mediated by water. The practical solution to the protein stability dilemma is to remove the water. Lyophilization is most commonly used to prepare dehydrated proteins, which, theorecally, should have the desired long-term stability at ambient temperatures. The protein used in this study was the bovine serum albumin (BSA), largely studied in the biochemical field. Through Raman spectroscopy associated with thermal analysis using DSC, Colorimetric analysis and the determination of water content It was observed that the fast freezing (30 °C/min.) favored the maintenance of the conformational structure in the protein after lyophilization, however increased the primary drying in seven hours with regard to the slow freezing (2,5 °C/min.). After the modification of bovine serum albumin with methoxy-PEG it was observed that the BSA-PEG (1:0,25) showed a lower degree of structural alterations and consequently a lower variation on the physical-chemical characteristics, moreover optimized the conditions during the lyophilization process and storage of the protein when it was compared to BSA-PEG (1:0,5).

Magnetic nanoparticles (MNPs) hold great promise in the fields of biology and medicine. The synthesis of functional MNPs with precisely controlled crystallographic, physicochemical, and magnetic properties on a large scale still remains the challenge today. This thesis reports the exploration of liquid-fed flame spray pyrolysis (FSP) in the synthesis of functional MNPs, their surface modifications, and potential bio-applications. Superparamagnetic and ferromagnetic maghemite (γ-Fe2O3) nanoparticles, and silica-coated maghemite (SiO2/γ-Fe2O3) nanocomposites were synthesised using FSP. The size of γ-Fe2O3 was controllable from 6 to 53 nm, with morphology evolving from a disordered near-spherical shape to fully ordered 2-D hexagonal/octagonal platelet. The saturation magnetisation (Ms) increased from 21 to 74 emu/g with increasing particle size, up to 13 nm when Ms approached the bulk γ-Fe2O3 characteristics. In the case of SiO2/γ-Fe2O3, three distinct morphologies, namely the single segregated γ-Fe2O3 core- SiO2 shell, transitional mixed morphologies, and multi γ-Fe2O3 cores embedded in submicron SiO2 shell, were obtained. The core size, composite size, and morphology of γ- Fe2O3 were tunable by varying %SiO2 loading and the use of a quartz tube enclosure during flame synthesis. The magnetic behaviour correlated well with the crystal microstructure. Following the core particle design, protein adsorption-desorption behaviour on FSP-madeMNPs was studied. Bovine serum albumin (BSA) adsorption was found to follow the Langmuir isotherm, with high binding capacities (150−348 mg BSA/g particle) and fast association constants. Electrostatically governed BSA orientations were proposed for different particle-buffer systems. The adsorbed BSA was effectively recovered by pH-shift using K2HPO4. Subsequently, terminal amine, aldehyde, carboxylic, epoxy, mercapto and maleimide functionality were anchored onto the FSP-made γ-Fe2O3 particles. These versatile functional groups led to conjugation of active trypsin. The immobilised trypsin exhibited superior durability with >60% residual activity after one week, and excellent reusability for >5 cycles. The trypsin-conjugated MNPs are promising carriers in proteomics, demonstrating good substrate specificity with equivalent or better sequence coverage compared to free trypsin in insulin and BSA digestion. In another application, a refined silanisation procedure simultaneously reduced γ-Fe2O3 to Fe3O4, and generated thiol enriched surface for matrix metalloproteinase-2 (MMP-2) conjugation. The highly active MMP-2-conjugated MNPs could potentially enhance the interstitial transport of macromolecule/nanoparticles in drug delivery.

The thermal denaturation of proteins has been extensively studied using several methods including differential scanning calorimetry (DSC). A custom-built optical system was used to study thermal effects on protein as an alternative method to DSC measurements. It was used to investigate the thermal stability of bovine serum albumin (BSA) with a focus on comparisons with published DSC data. In the first study, the effect of protein concentration on the thermal denaturation (Td) of BSA was determined and validated using published DSC data for bovine serum albumin (BSA). The optical rotation (OR) and transmitted light (TL) signals indicating protein conformational changes and gel formation, respectively, were collected during the heating of BSA solutions at ~6��C/min from room temperature to ~85��C. The experiments were performed on 1, 2.5 and 5% (w/v) BSA in 0.01 M phosphate buffer at pH 7 and ionic strength (IS) 0.08. BSA���s Td values obtained from this investigation were consistent with published values and had low experimental variability (CV<2.5%). In agreement with some but not all published data, increasing BSA concentration did not affect its thermal stability. Protein gel formation, however, increased with protein concentration. In the second study, changes in the OR and TL signal of BSA in 0.01 M phosphate buffer at pH 6.1, 7 and 7.9 with IS maintained at 0.04, 0.08 and 0.16 were recorded during the heating of BSA solutions at ~6��C/min from room temperature to ~85��C. BSA showed a maximum and minimum thermostability at pH 7 and 7.9, respectively, consistent with published values determined by DSC. BSA formed opaque gel at pH 6.1 approaching the BSA���s pI values. Increasing IS level did not have a significant effect on BSA���s Td value but promoted gel formation. In the third study, the optical method was applied to investigate the heat stability of BSA as affected by low concentrations of sucrose, trehalose or sorbitol. BSA solutions (2.5% w/v) in the presence of 0 5% sucrose, trehalose and sorbitol were heated at ~6��C/min from ambient temperature to ~85��C. In contrast with published work on the thermal stability of BSA in the presence of higher sugar concentrations, this study showed that increasing sugar concentration did not enhance the thermal stability of this protein. Also, the ability to promote protein stability among sucrose, trehalose and sorbitol were not significantly different. The significance of these studies is that they demonstrate that the custom-built optical methods here developed can be used to study heat-induced protein denaturation and the effect of environmental conditions. Future studies will examine other proteins such as ��-lactoglobulin or ��-lacactalbumin. A further advantage of optical systems is their ability to conduct real-time measurements which could be used for food processing control. / Graduation date: 2007

In this thesis, a direct method of Atomic Force Microscopy (AFM) technique has been developed to measure the adhesion forces between BSA and two different surfaces: mica (a hydrophilic surface); and polystyrene (a hydrophobic surface); in PBS solution. We have shown possible to measure interactions between proteins and substrate surface directly without any modification to the substrate and the AFM tip; this means protein molecules can keep the natural elastic property within the force measurements. The average measured value of adhesion forces between BSA and mica is 0.036 ± 0.002 nN, and between BSA and polystyrene is 0.066 ± 0.003 nN. The polystyrene surface is more adhesive to BSA than the mica surface. This is consistent with previous research, which assessed that hydrophobic surfaces enhance protein adhesion but hydrophilic surfaces do not.

Magnetic nanoparticles (MNPs) hold great promise in the fields of biology and medicine. The synthesis of functional MNPs with precisely controlled crystallographic, physicochemical, and magnetic properties on a large scale still remains the challenge today. This thesis reports the exploration of liquid-fed flame spray pyrolysis (FSP) in the synthesis of functional MNPs, their surface modifications, and potential bio-applications. Superparamagnetic and ferromagnetic maghemite (γ-Fe2O3) nanoparticles, and silica-coated maghemite (SiO2/γ-Fe2O3) nanocomposites were synthesised using FSP. The size of γ-Fe2O3 was controllable from 6 to 53 nm, with morphology evolving from a disordered near-spherical shape to fully ordered 2-D hexagonal/octagonal platelet. The saturation magnetisation (Ms) increased from 21 to 74 emu/g with increasing particle size, up to 13 nm when Ms approached the bulk γ-Fe2O3 characteristics. In the case of SiO2/γ-Fe2O3, three distinct morphologies, namely the single segregated γ-Fe2O3 core- SiO2 shell, transitional mixed morphologies, and multi γ-Fe2O3 cores embedded in submicron SiO2 shell, were obtained. The core size, composite size, and morphology of γ- Fe2O3 were tunable by varying %SiO2 loading and the use of a quartz tube enclosure during flame synthesis. The magnetic behaviour correlated well with the crystal microstructure. Following the core particle design, protein adsorption-desorption behaviour on FSP-madeMNPs was studied. Bovine serum albumin (BSA) adsorption was found to follow the Langmuir isotherm, with high binding capacities (150−348 mg BSA/g particle) and fast association constants. Electrostatically governed BSA orientations were proposed for different particle-buffer systems. The adsorbed BSA was effectively recovered by pH-shift using K2HPO4. Subsequently, terminal amine, aldehyde, carboxylic, epoxy, mercapto and maleimide functionality were anchored onto the FSP-made γ-Fe2O3 particles. These versatile functional groups led to conjugation of active trypsin. The immobilised trypsin exhibited superior durability with >60% residual activity after one week, and excellent reusability for >5 cycles. The trypsin-conjugated MNPs are promising carriers in proteomics, demonstrating good substrate specificity with equivalent or better sequence coverage compared to free trypsin in insulin and BSA digestion. In another application, a refined silanisation procedure simultaneously reduced γ-Fe2O3 to Fe3O4, and generated thiol enriched surface for matrix metalloproteinase-2 (MMP-2) conjugation. The highly active MMP-2-conjugated MNPs could potentially enhance the interstitial transport of macromolecule/nanoparticles in drug delivery.

Submitted by Marivaldo Rodrigues Figueiro (marivaldo.figueiro@embrapa.br) on 2018-05-02T19:49:49Z No. of bitstreams: 1 Tese_Marivaldo_Rodrigues_Figueiro.pdf: 1104812 bytes, checksum: 07b57b57c50c0ce48e486b2965bd2e74 (MD5) / Approved for entry into archive by Alexandra Maria Donadon Lusser Segali null (alexmar@fcav.unesp.br) on 2018-05-04T17:05:00Z (GMT) No. of bitstreams: 1 figueiró_mr_dr_jabo.pdf: 1104812 bytes, checksum: 07b57b57c50c0ce48e486b2965bd2e74 (MD5) / Made available in DSpace on 2018-05-04T17:05:00Z (GMT). No. of bitstreams: 1 figueiró_mr_dr_jabo.pdf: 1104812 bytes, checksum: 07b57b57c50c0ce48e486b2965bd2e74 (MD5) Previous issue date: 2018-03-19 / O maior rebanho bubalino da América Latina encontra-se no Brasil, fato que pode fazer do país um grande exportador de material genético da espécie. Nesse contexto, o desenvolvimento e o uso das biotécnicas da reprodução animal surgem como eixo central para aumentar a capacidade de multiplicação de material genético superior e promover o melhoramento animal. Desta forma, este estudo trem como objetivo validar protocolos que proporcionem a obtenção de embriões com maior qualidade e menor acúmulo lipídico, os quais estão apresentados em dois capítulos. O capitulo I, é composto de revisão bibliográfica abordando os estudos relacionados aos principais aspectos na maturação in vitro de oócitos bubalinos, importância dos lipídeos nos oócitos e embriões produzidos in vitro, efeitos da redução lipídica no desenvolvimento oocitário e embrionário e o emprego da L-carnitina na produção embrionária. No capítulo II, está apresentado um artigo composto de experimento I, o qual foi a determinado a menor concentração de SFB no meio MIV que promovesse manutenção das taxas de desenvolvimento embrionário, No experimento II, foi avaliado a adição de 5 mM de L-carnitina nos meios de maturação e consequentemente forma submetidos à avaliação lipídica, por meio de técnicas de coloração em microscopia óptica e confocal. Onde concluímos que não houve diferenças em relação ao acúmulo lipídico embrionário e que possível reduzir a concentração de SFB até 5% nos meios de maturação in vitro para produção de embriões em bubalinos e a suplementação do meio com L-carnitina não proporciona aumento na produção embrionária. / The largest buffaloes herd in Latin America is in Brazil, a fact that can make the country a great exporter of genetic material of the species. In this context, the development and use of biotechnics of animal reproduction arise as a central axis to increase the multiplication capacity of higher genetic material and promote animal improvement. In this way, this study train as objective validate protocols that provide the obtaining of embryos with higher quality and lower lipid accumulation, which are presented in two chapters. Chapter I, is composed of a bibliographical revision addressing the studies related to the main aspects of the in vitro maturation of oocytes buffaloes, importance of the lipids in the oocytes and in vitro embryos produced, effects of the reduction lipid in oocitário and embryonic development and the use of L-carnitine in embryonic production. In chapter II, an article composed of experiment I, which was determined the smallest concentration of fetal bovine serum (FBS) in the IVM environment that promoted the maintenance of the embryo development rates. In the experiment II, was evaluated the addition of 5 mM of L-carnitine in the means of maturation and consequently form subjected to the lipid evaluation, by means of coloring techniques in optical and confocal microscopy. Where we concluded that there were no differences in relation to embryonic lipid accumulation and that it could reduce the concentration of FBS up to 5% in the IVM methods for the production of embryos in buffaloes and the supplementation of the medium with L-carnitine does not provide increase in embryonic production.

A Fotoquimioterapia (FQT) vem sendo usada no tratamento de várias doenças, inclusive câncer, com a vantagem de ser menos agressiva, possuindo efeitos colaterais negativos desprezíveis. Esta técnica envolve a combinação de uma fonte de luz visível e de um fotossensibilizador (FS), que é reativo apenas sob a irradiação com luz adequada, e que se acumula preferencialmente no tecido doente. Uma ideia para deixar essa técnica mais eficiente é potencializar esta última característica do FS com uso de um carreador que tenha afinidade com tecidos doentes. Pensamos na hipótese de usar a albumina do soro como carreador uma vez que ela é uma proteína intrínseca do organismo, tem alta afinidade com os tecidos tumorais e possui sítios para ligar vários compostos extrínsecos. Como modelo usamos a albumina de soro bovino (ASB). Como FS utilizamos acridina laranja, nitrofurantoína, corantes ciânicos com dois cromóforos e protoporfirina IX (PpIX) sintética e extraída de glândulas Harderianas de ratos da linhagem Wistar (PpIX endógena). Foram analisadas as características de ligação entre os FS e a ASB e seus efeitos nas características fotofísicas dos FS em função da sua estrutura, utilizando espectroscopias de absorção ótica, fluorescência estática e resolvida no tempo e a técnica de microscopia de imagens por tempo de vida da fluorescência (FLIM). Foi mostrado que a ligação com ASB induz ao deslocamento batocrômico dos espectros de absorção e da fluorescência, aumentando a intensidade e o tempo de vida de fluorescência dos FS. Características como carga positiva, estrutura linear e tamanho pequeno da molécula do FS favorecem sua ligação com a ASB. Uma comparação entre PpIX sintética e endógena mostrou que a formação de um complexo da PpIX com estruturas anfifílicas também aumenta a probabilidade da sua ligação com a ASB. Os resultados obtidos mostraram que a ASB se liga efetivamente aos FS de diferentes estruturas e pode ser usada como carreador dos mesmos para tecidos tumorais. / Photochemotherapy (PCT) is used for the treatment of various diseases, including cancer, with the advantage of being less aggressive with reduced adverse effects. This technique includes the use of a visible light source and a photosensitizer (PS), which is reactive only under light exposure and localizes preferably in abnormal tissues. To make this technique more efficient it is necessary to increase the PS content in these tissues using a carrier which possesses affinity with these tissues and is able to bind PS. A good opportunity is to use serum albumin as a carrier since it is an intrinsic protein, has high affinity to tumor tissues and possesses sites for binding of various extrinsic compounds. In this work the bovine serum albumin (BSA) was used as a carrier model. Acridine orange, nitrofurantoin, cyanine dyes with two chromophores and protoporphyrin IX synthetic and extracted from Harderian glands of Wistar line rats (endogenous) were used as PS. The characteristics of the PS binding with BSA and the effect of this interaction on PS photophysical properties were studied using optical absorption, steady-state and time resolved fluorescence spectroscopies, and fluorescence lifetime image microscopy (FLIM). It was demonstrated that PS binding with BSA produces a bathochromic shift in the PS absorption and fluorescence spectra and increases its fluorescence intensity and lifetime. The positive charge, linear structure and small size of the PS molecule favors its binding with BSA. A comparison between synthetic and endogenous PpIX demonstrates that complexation of PpIX molecule with an amphiphilic structure increases the probability of its binding with BSA. The obtained results demonstrate that BSA binds effectively PS with different molecular structures and it is promising for their transport to tumor tissue.

The interaction between two proteins into salt aqueous solutions is investigated throughout this thesis. Experiments, modeling and molecular simulations were carried out to get a better understanding of the phenomenon. Bovine serum albumin was used as a model protein. An analytical expression for the structure factor for globular proteins in aqueous solution is presented in this work. This expression was obtained considering an intermolecular potential given by the sum of a hard core, a van der Waals attractive and a screened Coulomb contribution. Experimental data of Small Angle X-Ray Scattering for bovine serum albumin in aqueous solutions containing sodium salts at different protein concentrations and pH values are also presented. The expression developed for the structure factor describes accurately these experimental data provided a dependence of the attractive parameter on protein concentration is established. An expression for the osmotic pressure was derived from the structure factor. With attractive parameters adjusted from X-ray scattering data, the osmotic pressure of bovine serum albumin aqueous solutions could be predicted with very good agreement with experimental data. A derivation of the thermodynamic potentials, such as the chemical potential, using the new osmotic equation of state is presented. Applying the phase equilibrium criterion, the fluid-fluid phase equilibrium for bovine serum albumin in salt aqueous solution was calculated. Although such separation was not experimentally observed at the isoelectric point, it was indeed experimentally observed for a pH value below the isoelectric point. The predictions seem to be valuable to discuss how ion specificity affects the phase diagram of proteins. To apply molecular dynamic techniques to simulate how proteins interact to each other in salt aqueous solutions, two new coarse-grained force fields are proposed. The first one, meant for sodium sulfate aqueous solution, avoids the unphysical association observed for non-polarizable atomistic force fields; and allows the prediction of thermodynamic and dynamic properties. The second one, meant for bovine serum albumin in aqueous solution, is used as a new strategy to evaluate the scattering form factor of proteins as a low resolution technique for protein structure prediction. / Nesta tese apresenta-se uma investigação sobre a interação entre duas proteínas em soluções aquosas salinas. Experimentos, modelagem e simulações moleculares foram realizadas para conseguir um melhor entendimento do fenômeno. Albumina de soro bovina foi usada como proteína modelo. Uma expressão para o fator de estrutura de proteínas globulares em solução aquosa é apresentada neste trabalho. Esta expressão foi obtida considerando-se um potencial intermolecular dado pela soma de um núcleo duro, uma contribuição atrativa tipo vander Waals e uma contribuição de potencial coulômbico blindado. Dados experimentais de espalhamento de raios-X a baixos ângulos para a albumina de soro bovino em soluções aquosas contendo sais de sódio com diferentes concentrações de proteína e valores de pH também são apresentados. A expressão desenvolvida para o fator de estrutura descreve com precisão estes dados experimentais, desde que uma dependência entre o parâmetro atrativo com a concentração de proteína seja estabelecida. Uma expressão para a pressão osmótica foi derivada do fator de estrutura. Com parâmetros atrativos ajustados aos dados de espalhamento de raios-X, a pressão osmótica da albumina de soro bovino em solução aquosa pôde ser predita com grande correlação com os dados experimentais. Uma derivação dos potenciais termodinâmicos usando a nova equação osmótica de estado é apresentada. Aplicando o critério de equilíbrio de fases, foi possível calcular o equilíbrio fluido-fluido para a albumina de soro bovino em solução aquosa. Embora tal separação não tenha sido observada experimentalmente em um pH igual ao ponto isoelétrico, ela foi de fato observada experimentalmente para um valor de pH menor do que o ponto isoelétrico. As predições parecem ser valiosas para discutir como a especificidade iônica afeta o diagrama de fases de proteínas. De modo a avaliar como proteínas interagem umas com as outras usando técnicas de dinâmica molecular, dois novos campos de força coarse-grained são propostos. O primeiro, para o sulfato de sódio em solução aquosa, evita a associação não-física que é observada para campos de força atomísticos não-polarizáveis. Este modelo é capaz de prever propriedades dinâmicas e termodinâmicas. O segundo, para a albumina de soro bovino em solução aquosa, é usado como uma nova estratégia para avaliar o fator de forma de espalhamento de proteínas como uma ferramenta de baixa resolução na predição de estruturas proteicas.