The aim of the study was to determine the extent of the psychological influence that human cadaver dissection has on Homoeopathy and Chiropractic students. Changes in axiety levels, appraisals (of the self, the situation and the environment), coping strategies and behavioural changes were investigated during the following four dissection phases: (i) before the dissection started (preparation); (ii) the first dissection period (exposure); (iii) two weeks after dissection started (development of resources) and (iv) three months after dissection started (stabilisation). Anxiety levels were measured using the Taylor Manifest Anxiety Scale and the Templer Death Anxiety Scale. The remaining sections of the self-administered questionnaire included open and closed ended sections. Anxiety levels were found to be low, possibly due to students being previously exposure to the dissection hall, during peer tutoring sessions. Although active coping strategies were used most often, no clear pattern emerged with regard to which coping strategy was more effective in dealing with dissection anxiety. / Psychology / M. Sc. (Psychology)

Introduction: (Experimental part). Hypothesis evaluates the quasi-static risk of transpedicular fixation failure in the spinal cadaver with anterior column defect due to the fixation extension and defines the risk of transpedicular fixation failure due to screw convergence in cyclic loading. (Clinical part). Hypothesis evaluates the risk of isolated dorsal approach to ventral lumbar spondylodiscitis due to clinic and radiopraphic results and the risk of anterior radical debridement due to using titanium implant in the site of bone infection. Methods: (Experimental part). Four anatomically preparated spinal cadavers with anterior spinal column defect transpediculary instrumented were quasi-statically tested on MTS 858,2 Mini-Bionix. Concept of cyclic loading part were based on ASTM standard F1717. (Clinical part). The group A consisting of 23 patients was treated only by dorsal transmuscular approach and the second group B consisting of 8 patients was treated by two-stage postero- anterior surgery in lumbar spondylodiscitis. Results: (Experimental part). There were progress in all assessed parametres with considerable asymmetry direction in extension to flexion and duction in spinal column loading with anterior defect during quasi-static loading. The rod deformation decrease with extent of...

Introdução: A paralisia facial periférica caracteriza-se pela interrupção, definitiva ou temporária, do funcionamento da musculatura facial. Decorre de lesão ou mau funcionamento das fibras do nervo facial. É uma enfermidade que causa enorme impacto estético e funcional. O topodiagnóstico e o tratamento da paralisia facial periférica pode requer abordagem médica e fonoaudiológica; ser exclusivamente medicamentoso ou associado à terapia de reabilitação, ou ainda, medicamentoso e cirúrgico, seguido da reabilitação da mímica facial. A via FCM tem sido usada para a descompressão do NF quando a audição precisa ser preservada. Esse acesso pode ser realizado de forma isolada, ou combinado à via transmastóidea. Objetivo: Descrever uma técnica inovadora para a descompressão do nervo facial via fossa craniana média que permite a exposição direta dos segmentos labiríntico e timpânico do nervo facial, com a preservação da função da orelha interna. Métodos: Vinte cabeças extraídas de cadáveres adultos de ambos os gêneros, sem sinais de malformação, traumatismo, doença ou manipulação cirúrgica prévia foram usados neste estudo. Os pontos de referência utilizados foram a artéria meníngea média, o nevo petroso superficial maior, a eminência arqueada, o seio petroso superior, e o plano meatal seguido no ápice petroso a partir da sua porção mais anterior e medial. Foi feita a dissecação do plano meatal, com visualização do meato acústico interno, seguido no ápice petroso a partir da sua porção mais anterior e medial até a região do gânglio geniculado. Foi aberto o tégmen timpânico e identificada a porção timpânica do nervo facial. A dissecação seguiu no sentido retrógrado da porção timpânica do nervo facial em direção ao gânglio geniculado, até a sua porção labiríntica. A aracnoide do meato acústico interno era aberta, e depois de identificado o nervo facial, a bainha deste nervo era aberta em extensão exposta. Resultados: As distâncias médias, entre o canal semicircular lateral e a porção média do cabo do martelo eram similares em ambos os lados (4,0mm±0,5mm). As distâncias médias, da porção timpânica do nervo facial até metade do cabo do martelo foram determinadas e resultaram em 2,0mm ± 0,44mm, e em 2,2mm ± 0,48mm para os lados direito e esquerdo, respectivamente. O segmento timpânico do nervo facial apresentou, em média, comprimento total de 11mm ± 0,67mm para o lado direito, e 11,5mm±0,60mm para o esquerdo. Os comprimentos longitudinais da janela óssea confeccionada no tégmen timpânico foram, em média, 16,8mm±1,67mm para o lado direito, e 16,8mm ± 1,20mm para o lado esquerdo. Já os comprimentos transversais da janela óssea confeccionada no tégmen timpânico foram, em média, 5,5mm ± 1,20mm e 5,0mm ± 1,75mm para os lados direito e esquerdo, respectivamente. O valor médio da área elíptica formada pelos comprimentos longitudinal e transversal da janela óssea confeccionada no tégmen timpânico foram 72,5mm2 ± 22,5mm2 à direita, e 65,9mm2 ± 30,3mm2 à esquerda. Conclusão: A técnica proposta pode ser utilizada para a cirurgia de descompressão do nervo facial via fossa craniana média, pois permite acesso aos segmentos timpânico, labiríntico e metal desse nervo, sem impor risco à audição. Pela possibilidade de acessar a porção timpânica do nervo, sem a necessidade da abertura da mastoide, o procedimento permite que se reduza o tempo cirúrgico e os riscos aos pacientes / Background: Peripheral facial palsy is characterized by the permanent or temporary interruption of the functioning of the facial muscles. The middle cranial fossa (MCF) approach has been used for the decompression of the facial nerve (FN) when hearing needs to be preserved. In this work, we describe an innovative technique for the decompression of the FN through the MCF approach that allows the direct exposure of the labyrinthine and entire tympanic segment of the FN, with the preservation of inner ear function. Methods: Twenty cadavers heads were used in this study. The reference landmarks used were the middle meningeal artery, the greater superficial petrosal nerve, the arcuate eminence, the inferior petrosal sinus and the meatal plane following the petrous apex from its most anterior and medial portion. Results: The tympanic segment of the FN presented, on average, a total length of 11 ± 0.67mm to the right, and 11.5 ± 0.60mm to the left. The longitudinal lengths of bone window in the tegmen tympani were 16.8±1.67mm to the right, and 16.8 ± 1.20mm to the left. The cross-sectional lengths of the bone window in the tegmen tympani were 5.5 ± 1.20mm and 5.0±1.75mm to the right and left sides, respectively. The average value of elliptical area formed by the longitudinal and transversal lengths of the bone window made in the tegmen tympani were 72.5 ± 22.5mm2 to the right, and 65.9 ± 30.3mm2 to the left. Conclusion: The proposed technique can be used for the surgical decompression of the tympanic, labyrinthine and meatal segments of the FN through the MCF, without imposing a risk to hearing, in addition to reducing the surgical time and the risk to patients

Para analisar o número e tamanho dos linfonodos mediastinais, cinqüenta cadáveres de brasileiros adultos foram dissecados de acordo com o mapa de Naruke/ATS-LCSG (1997). Foram retirados 1742 linfonodos, com 2,58±1,89 linfonodos por região, e realizadas suas medidas por processo digital. O tamanho médio da área, eixo maior e menor foi maior na cadeia 7 (195mm2, 18,75mm e 10,92mm) e 4R (115mm2, 13,72mm e 8,30mm), apresentando média de 49,41mm2, 9,40mm e 5,76mm para as demais regiões, respectivamente. A distribuição, número e tamanho dos linfonodos não mudou de acordo com a idade, sexo, raça, peso ou altura, contudo o tamanho aumentou em função da coalescência por processos granulomatosos prévios, com diminuição do número total de linfonodos / To analyze the number and sizes of the lymph nodes in the mediastinum, fifth human adult cadavers were dissected according to the Naruke/ATS-LCSG map (1997). It were removed 1742 lymph nodes, with 2,58±1,89 nodes for each region, and measured by a digital process. The mean area, long and minor axis were larger in regions 7 (195mm2, 18,75mm and 10,92mm) and 4R (115mm2, 13,72mm and 8,30mm), with a mean of 49,41mm2, 9,40mm and 5,76mm in the other regions, respectively. The distribution, number and size of the lymph nodes did not showed changes according age, sex, race, weight or high, however the size increases as function of coalescence by previous granulomatous processes, with decrease of the total number of lymph nodes

Background: Compare Goldmann applanation tonometer (GAT) prism and correcting applanation tonometry surface (CATS) prism to intracameral intraocular pressure (IOP), in vivo and in vitro. Methods: Pressure transducer intracameral IOP was measured on fifty-eight (58) eyes undergoing cataract surgery and the IOP was modulated manometrically to 10, 20, and 40 mmHg. Simultaneously, IOP was measured using a Perkins tonometer with a standard GAT prism and a CATS prism at each of the intracameral pressures. Statistical comparison was made between true intracameral pressures and the two prism measurements. Differences between the two prism measurements were correlated to central corneal thickness (CCT) and corneal resistance factor (CRF). Human cadaver eyes were used to assess measurement repeatability. Results: The CATS tonometer prism measured closer to true intracameral IOP than the GAT prism by 1.7+/-2.7 mmHg across all pressures and corneal properties. The difference in CATS and GAT measurements was greater in thin CCT corneas (2.7+/-1.9 mmHg) and low resistance (CRF) corneas (2.8+/-2.1 mmHg). The difference in prisms was negligible at high CCT and CRF values. No difference was seen in measurement repeatability between the two prisms. Conclusion: A CATS prism in Goldmann tonometer armatures significantly improve the accuracy of IOP measurement compared to true intracameral pressure across a physiologic range of IOP values. The CATS prism is significantly more accurate compared to the GAT prism in thin and less rigid corneas. The in vivo intracameral study validates mathematical models and clinical findings in IOP measurement between the GAT and CATS prisms.

Background: Goldmann applanation tonometry (GAT) error relative to intracameral intraocular pressure (IOP) has not been examined comparatively in both human cadaver eyes and in live human eyes. Futhermore, correlations to biomechanical corneal properties and positional changes have not been examined directly to intracameral IOP and GAT IOP. Methods: Intracameral IOP was measured via pressure transducer on fifty-eight (58) eyes undergoing cataract surgery and the IOP was modulated manometrically on each patient alternately to 10, 20, and 40 mmHg. IOP was measured using a Perkins tonometer in the supine position on 58 eyes and upright on a subset of 8 eyes. Twenty one (21) fresh human cadaver globes were Intracamerally IOP adjusted and measured via pressure transducer. Intracameral IOP ranged between 5 and 60 mmHg. IOP was measured in the upright position with a Goldmann Applanation Tonometer (GAT) and supine position with a Perkins tonometer. Central corneal thickness (CCT) was also measured. Results: The Goldmann-type tonometer error measured on live human eyes was 5.2 +/- 1.6 mmHg lower than intracameral IOP in the upright position and 7.9 +/- 2.3 mmHg lower in the supine position (p <.05). CCT also indicated a sloped correlation to error (correlation coeff. = 0.18). Cadaver eye IOP measurements were 3.1+/-2. 5 mmHg lower than intracameral IOP in the upright position and 5.4+/- 3.1 mmHg in the supine position (p <.05). Conclusion: Goldmann IOP measures significantly lower than true intracameral IOP by approximately 3 mmHg in vitro and 5 mmHg in vivo. The Goldmann IOP error is increased an additional 2.8 mmHg lower in the supine position. CCT appears to significantly affect the error by up to 4 mmHg over the sample size.

INTRODUÇÃO: Os ligamentos mediais responsáveis pela manutenção da estabilidade da articulação patelofemoral (PF) são o ligamento patelofemoral medial (LPFM), o ligamento patelotibial medial (LPTM) e o ligamento patelomeniscal medial (LPMM). Sobre o LPFM, existem vários estudos anatômicos, radiológicos, biomecânicos, e a evolução clínica de sua lesão e reconstrução; no entanto, pouco se sabe sobre o LPTM e o LPMM. MÉTODOS: O LPFM, o LPTM e o LPMM foram dissecados em 9 joelhos. Todos os ligamentos foram enviados para avaliação histológica, corados pelo método de hematoxilina e eosina (HE), após o teste biomecânico. Foram medidos o comprimento e a largura bem como a relação das inserções com referências anatômicas (epicôndilo medial do fêmur, tubérculo dos adutores no fêmur, linha articular, tendão patelar e menisco medial). Esferas metálicas foram introduzidas nas inserções e radiografias em ântero-posterior (AP) e perfil (P) realizadas. Foram medidas as distâncias entre as inserções e as linhas de base (na tíbia, linha do planalto, borda medial do planalto e borda medial da espinha medial; e na patela, linha da cortical posterior e bordas proximal e distal da patela). Os ensaios de tração dos ligamentos foram executados em uma máquina de ensaios mecânicos KRATOS. RESULTADOS: Todos os materiais apresentaram tecido conjuntivo denso característico de tecido ligamentar. Com o estudo anatômico verificamos que o LPFM se encontrou na camada 2, com comprimento de 60.6 mm e largura de 15,3 mm no fêmur e 20,7 mm na patela. Inseriu-se entre o tubérculo dos adutores e o epicôndilo medial no fêmur e no pólo proximal da patela. O LPTM tinha um comprimento de 36,4 mm e largura de 7,1 mm. Sua inserção tibial se encontrou 13,7 mm distal a articulação e 11,6 mm medial ao tendão patelar formando um ângulo de 18,5o com este. A inserção na patela foi 3,6 mm proximal a sua borda distal. O LPMM se encontrou na camada 3 e seu comprimento foi de 33,7 mm e largura de 8,3 mm. Com uma inserção meniscal no corno anterior, 26,6 mm medial ao tendão patelar e formando ângulo com tendão patelar de 42,8o. Sobre os parâmetros radiográficos, a inserção tibial do LPTM se encontrou 9,4 mm, na incidência AP, e 13,5 mm, na incidência P, distal a articulação. Quanto ao posicionamento médio lateral a inserção se encontrou a 30% do comprimento do planalto de medial para lateral e na borda medial da espinha medial. A inserção patelar era 4,8 mm proximal a sua borda distal. Na análise biomecânica verificamos que o LPTM era mais rígido que o LPFM (médias de 17,0 N/mm versus 8,0 N/mm, respectivamente) e apresentou menor deformação no limite de resistência máxima (8,6 mm Resumo Betina Bremer Hinckel versus 19,3 mm). CONCLUSÃO: Os ligamentos foram identificados em todos os joelhos. Os parâmetros anatômicos e radiográficos das inserções foram bem definidos. Os enxertos comumente utilizados para as reconstruções ligamentares do joelho são suficientes para a reconstrução do LPFM e do LPTM / INTRODUCTION: The medial ligaments responsible for maintaining the stability of the patellofemoral (PF) joint are the medial patellofemoral ligament (MPFL), the medial patellotibial ligament (MPTL) and the medial patellomeniscal ligament (MPML). There are several studies on the anatomical, imaging, and biomechanical characteristics of the MPFL, and clinical outcome of its injury and reconstruction; however, little is known about the MPTL and MPML. METHODS: The MPFL, MPTL and MPML were dissected in 9 knees. All ligaments underwent histological evaluation by hematoxylin eosin stain after the biomechanical test. The length and width and the insertions relationship with anatomical references (medial epicondyle of the femur, adductor tubercle of the femur, joint line, patellar tendon and medial meniscus) were measured. Steel balls were introduced at the insertions and radiographs in anteroposterior (AP) and profile (P) views were performed. The distance between the insertions to baselines were measured (in the tibia, the plateau line, the medial plateau border and the medial border of the medial tibial spine; and in the patella the posterior cortical line and the proximal and distal patellar borders). The tensile tests of the ligaments were performed on a mechanical testing machine KRATOS. RESULTS: All materials showed dense connective tissue characteristic of ligaments. With the anatomical study we found that the MPFL was in layer 2, it has length of 60.6 mm and width of 15,3 mm in the femur and 20,7 mm in the patella. Inserting between the adductor tubercle and the medial epicondyle on the femur and in the inferior pole of the patella. The MPTL was found in layer 2, its length was 36.4 mm and width of 7.1 mm. Its tibial insertion was found 13.7 mm distal to the joint line and 11.6 mm medial to the patellar tendon at an angle of 18,5o with it. On the patella it was 3.6 mm proximal to its distal border. The MPML was in layer 3 and its length was 33.7 mm and width of 8.3 mm. The meniscal insertion was in the anterior horn, 26.6 mm medial to the patellar tendon and a 42,8o angle with it. In regards to the radiographic parameters the tibial insertion of LPTM was 9.4 mm, in the AP, and 13.5 mm, in the P, distal to the joint line. The medial lateral position was at 30% from medial to lateral on the tibial plateau and on the medial edge of the medial spine. The patellar insertion was 4.8 mm proximal to the distal border of the patella. In the biomechanical analysis we verified that the MPTL was more rigid then the MPFL (average of 17.0 N / mm versus 8.0 N / mm, respectively) and showed less deformation in the maximum tensile strength (8,6 mm versus 19,3 mm). CONCLUSION: The ligaments were identified in all knees. The anatomical and radiographic insertion parameters were well

O ligamento cruzado anterior é o ligamento mais lesado dentre os ligamentos do joelho. Apesar de um aprimoramento das técnicas de reconstrução, existe ainda um porcentual de pacientes que apresenta resultado funcional insatisfatório. Possivelmente a causa dessa instabilidade rotatória estaria nas estruturas localizadas na porção anterolateral do joelho, não reconstruídas nas reconstruções intra-articulares isoladas. Uma dessas estruturas seria o ligamento anterolateral, estrutura estudada com detalhes nos últimos anos, ainda com controvérsias em relação a seus parâmetros anatômicos, histológicos e de visualização por ressonância magnética. Neste estudo, foram realizadas dissecções de 112 cadáveres para avaliação dos parâmetros anatômicos e histológicos do ligamento anterolateral, sendo que 13 deles foram submetidos ao exame de ressonância magnética previamente às dissecções. O estudo do ligamento anterolateral por ressonância magnética foi realizado também em 42 pacientes. Como resultados, o ligamento anterolateral foi encontrado com constância na região anterolateral do joelho, com origem próxima ao epicôndilo lateral, trajeto anterodistal em direção à tíbia e inserção na periferia do menisco lateral e na região anterolateral da tíbia, entre o tubérculo de Gerdy e a cabeça da fíbula. Sua análise histológica mostrou a presença de tecido conectivo denso e bem organizado, semelhante a tecido ligamentar. A avaliação por ressonância magnética mostrou parâmetros de origem, inserção e trajeto semelhantes às dissecções anatômicas, embora não sendo possível a visualização completa dessa estrutura em todos os exames. Existiu correlação entre as medidas encontradas nos exames de ressonância magnética e nas dissecções, exceto em relação à espessura do ligamento anterolateral / The anterior cruciate ligament is the most injured ligament of the knee. Despite an improvement in reconstruction techniques, there is still a percentage of patients with poor functional outcome after its reconstruction. Possibly, the cause of this rotational instability would be the structures located in the anterolateral portion of the knee, not addressed in the isolated intra-articular reconstructions. One of such structures would be the anterolateral ligament, a structure studied in detail in recent years, with controversies regarding its anatomical, histological and magnetic resonance imaging parameters. In this study, dissections of 112 cadavers were performed to evaluate anatomical and histological parameters of anterolateral ligament, and 13 of them underwent magnetic resonance imaging examination prior to dissection. The anterolateral ligament study by magnetic resonance imaging was also performed in 42 patients. As a result, the anterolateral ligament was found with constancy in the anterolateral region of the knee, with origin near the lateral epicondyle, antero-distal path towards the tibia and insertion in the periphery of the lateral meniscus and in the anterolateral region of the proximal tibia, between Gerdy\'s tubercle and the fibular head. Its histological analysis showed the presence of dense and well-organized connective tissue, similar to a ligamentous tissue. The magnetic resonance imaging evaluation showed origin, insertion and path parameters similar to the anatomical dissections, although it is not possible to fully visualize this structure in all the magnetic resonance imaging exams. There was a correlation between the measurements found in magnetic resonance imaging scans and dissections, except in relation to the anterolateral ligament thickness

Introduction: (Experimental part). Hypothesis evaluates the quasi-static risk of transpedicular fixation failure in the spinal cadaver with anterior column defect due to the fixation extension and defines the risk of transpedicular fixation failure due to screw convergence in cyclic loading. (Clinical part). Hypothesis evaluates the risk of isolated dorsal approach to ventral lumbar spondylodiscitis due to clinic and radiopraphic results and the risk of anterior radical debridement due to using titanium implant in the site of bone infection. Methods: (Experimental part). Four anatomically preparated spinal cadavers with anterior spinal column defect transpediculary instrumented were quasi-statically tested on MTS 858,2 Mini-Bionix. Concept of cyclic loading part were based on ASTM standard F1717. (Clinical part). The group A consisting of 23 patients was treated only by dorsal transmuscular approach and the second group B consisting of 8 patients was treated by two-stage postero- anterior surgery in lumbar spondylodiscitis. Results: (Experimental part). There were progress in all assessed parametres with considerable asymmetry direction in extension to flexion and duction in spinal column loading with anterior defect during quasi-static loading. The rod deformation decrease with extent of...

No description available.