Glass materials surround us, impacting our lives on a daily basis, whether geologically deposited by volcanic activity or synthesized in large volume by industry. These amorphous oxide materials are vastly important due to their variety of applications including solid electrolytes, cookware, and storage of high-level nuclear waste. Although they are used for different applications, one common characteristic of these materials is the absence of long-range periodic order. This makes it difficult to use traditional solid-state characterization methods such as x-ray and neutron diffraction to study glass structure. Nuclear magnetic resonance (NMR), is ideally suited to study materials that exhibit short-range non-periodic order as it probes directly at a nucleus of interest and is sensitive to its local structural environment. This ability of solid-state NMR is illustrated by revealing local structural features in various oxide materials presented in this thesis. Within is a compilation of studies looking at basic borates, followed by borovanadates and complex borosilicate glasses. A multinuclear application of using quantum chemical calculations, single and double resonance methods and charge-balance models are discussed to deconvolute the complex structures of these disordered materials. This is followed by a study of a difficult low-gamma nucleus, 73Ge, (once considered “impossible” for solid-state NMR) which is explored for future material studies by looking at 73Ge NMR of crystalline and glassy germanates. 73Ge chemical shifts were related to coordination environments and quadrupolar coupling constants were related to bond length distortions.

As part of this project and in preparation for future experimental studies of gas-phase ion-molecule reactions, extensive modification and characterization of the crossed molecular beam machine in the Department of Chemistry, University of Canterbury has been carried out. This instrument has been configured and some preliminary testing completed to enable the future study of gas-phase ion-molecule collisions of H⁺₃ and Y⁻ (Y = F, Cl, Br) with dipole-oriented CZ₃X (Z = H, F and X = F, Cl, Br). Theoretical calculations (ab initio and density functional theory) are reported on previously experimentally characterized Na + CH₃NO₂, Na + CH₃NC, and K + CH₃NC systems, and several other systems of relevance. All gas-phase experimental and theoretical studies have the common theme of studying collision orientation dependence of reaction under singlecollision conditions. Experimental measurements, theoretical simulations and calculations are also reported on some selected ferrous (Fe²⁺) high-spin (S=2) crystals, in an attempt to resolve microscopic contributions of two fundamental macroscopic tensor properties: the electric-field gradient (efg); and the mean square displacement (msd) in the case when more than one symmetry related site of low local point-group symmetry contributes to the same quadrupole doublet. These determinations have been made using the nuclear spectroscopic technique of Mössbauer spectroscopy, and complemented with X-ray crystallographic measurements.

This dissertation presents studies of the synthetic processes and applications of siloxane-based materials. Kinetic investigations of bridged organoalkoxysilanes that are precursors to organic-inorganic hybrid polysilsesquioxanes are a primary focus. Quick gelation despite extensive cyclization is found during the polymerization of bridged silane precursors except for silanes with certain short bridges. This work is an attempt to characterize and understand some of the distinct features of bridged silanes using experimental characterization, kinetic modeling and simulation. In addition to this, the dissertation shows how the properties of siloxane- materials can be engineered for drug delivery and adsorption. The phase behavior of polymerizing mixtures is first investigated to identify the solutions that favor kinetic characterization. Microphase separation is found to cause gradual loss of NMR signal for certain initial compositions. Distortionless Enhancement by Polarization Transfer 29Si NMR is employed to identify the products of polymerization of some short-bridged silanes under no signal loss conditions. This technique requires knowing indirect 29Si-1H scalar coupling constants which sometimes cannot be measured due to second-order effects. However, the B3LYP density functional method with 6-31G basis set is found to predict accurate 29Si-1H coupling constants of organoalkoxysilanes and siloxanes. The scalar coupling constants thus estimated are employed to resolve non-trivial coupled NMR spectra and quantitative kinetic modeling is performed using the DEPT Si NMR transients. In order to investigate the role of the organic bridging group, the structural evolution of bridged and non-bridged silanes are compared using Monte Carlo simulations. Kinetic and simulation models suggest that cyclization plays a key role right from the onset of polymerization for bridged silanes even more than in non-bridged silanes. The simulations indicate that the carbosiloxane rings formed from short-bridged precursors slow down but do not prevent gelation. The tuning of siloxane-based materials for adsorption technologies are also discussed here. In the first example, antioxidant enzyme loading is investigated as a means to reduce oxidative stress generated by silica nanoparticle drug carriers. Materials are engineered for promising enzyme loading and protection from proteolysis. Second, the potential of copper sulfate impregnation to enhance adsorption of ammonia by silica is explored by molecular simulation.

Metal-hydrocarbon complexes were prepared in a laser-vaporization molecular beam source and studied by single-photon zero electron kinetic energy (ZEKE) and mass-analyzed threshold ionization (MATI) spectroscopy. The ionization energies and vibrational frequencies of the metal complexes were measured from the ZEKE and MATI spectra. Metal-ligand bonding and low-lying electronic states of the neutral and ionized complexes were analyzed by combining the spectroscopic measurements with quantum chemical calculations and spectral simulations. In this dissertation, the metal complexes of mesitylene, aniline, cyclooctatetraene, benzene, ethene, and propene were studied. For each complex, different effects from metal coordination have been identified. Although metal-bis(mesitylene) sandwich complexes may adopt eclipsed and staggered conformations, the group VI metal-bis(mesitylene) complexes are determined to be in the eclipsed form. In this form, rotational conformers with the methyl group dihedral angles of 0 and 60° are identified for the Cr complex, whereas the 0° rotamer is observed for the Mo and W species. The unsuccessful observation of the 60° rotamer for the Mo and W complexes is the result of its complete conversion to the 0° rotamer in both He and He/Ar carriers. For group III metal aniline complexes, the ZEKE spectrum of each complex exhibits a strong origin band, a short M+-aniline stretching progression, and several low-frequency ligand based vibrational modes. The intensities of most of the transitions can be explained by the Franck-Condon (FC) principle within the harmonic approximation. However, the intensity of the low frequency out-of-plane ring deformation mode is greatly overestimated by the FC calculations and may be caused by the anharmonic nature of the mode. Although aniline offers two possible binding modes for the metal atoms, a п binding mode is identified with the metal atom over the phenyl ring. For Ce, Pr, and Nd(cyclooctatetraene) complexes multiple band systems are observed. This is assigned to the ionization of several low-lying electronic states of the neutral complex. This observation is different from the Gd(cyclooctatetraene) complex, for which a single band system is observed. The presence of the multiple low-energy electronic states is caused by the splitting of the partially filled lanthanide 4f orbitals in the ligand field. The ZEKE spectrum of the Gd(benzene) complex exhibits a strong origin band, whereas the spectrum of Lu(benzene) displays a weak one. The benzene ring is planar in the Gd complex, but bent in the Lu complex. Dehydrogenation and C-C coupling products are observed in the reaction of La atom and ethene/propene. For the La and ethene reaction, La(C2H2) and La(C4H6) complexes are identified. With propene, C-H bond activation leads to the formation of the La(C3H4) and H-La(C3H5) complexes, whereas the C-C coupling yields the La(trimethylenemethane) complex. In addition, the La(CHCCH3) and La(CHCHCH2) isomers of La(C3H4) are observed, which are produced by the 1,2- and 1,3-hydrogen elimination of propene.

Krav om förbättrad spillvattenrening och städer som förgrenar sig över större områden är några av anledningarna till att dagens avloppsledningsnät får allt längre ledningssträckor. Att med gravitationens hjälp föra avloppsvatten framåt kräver ett kontinuerligt fall som vid långa avstånd kan innebära mycket schaktning, den ekonomiskt mest belastande delen vid nyinstallation av avloppsledningsnät. Ett fördelaktigt alternativ kan vara trycksatt avloppssystem, som sedan 70-talet har kompletterat de traditionella självfallssystem i kuperade och bergiga områden. På senare tid har trycksatt avloppsystem fått större användningsområde utanför sina etablerade bruksområden med anledning av skärpta krav på rening och kostnadseffektivitet. Självfallssystem är dock det mest använda avloppssystemet i urbana områden. För ett bostadsområde i utkanten av centrum, utanför de båda systemens vedertagna användningsområden, vore det därför intressant att undersöka vilket av avloppssystemen som är bäst lämpat. För VA-branschen generellt vore det också intressant att utreda hur de båda systemen står sig vid en jämförelse. Med anledning av detta var syftet med examensarbetet att jämföra trycksatt avloppssystem med självfallssystem på grundval av ekonomi, miljö och kapacitet. I tillägg undersöktes om några generella slutsatser kunde fastställas utifrån fallstudien. Undersökningen baserades på ett bostadsområde i utkanten av Fredrikstad centrum, som nyligen projekterats med självfall. Ett teoretiskt trycksatt avloppssystem projekterades. Ekonomi värderades utifrån drift- och underhållskostnader samt grund- och reinvesteringskostnader. Kapaciteten jämfördes numeriskt och via dimensioneringsmodeller. Vad gäller den miljömässiga jämförelsen utvärderades systemet med hjälp av rapporter utgivna av Svenskt Vatten och Norsk Vann. Det planerades en utbyggnad för området till dubbla antalet fastigheter vilket visade sig bli avgörande för det ekonomiska resultatet. Den vitala faktorn var de höga investerings- och driftskostnaderna för pumpenheterna vilket gjorde självfallssystemet mer ekonomiskt lämpligt. Även ur ett miljömässigt perspektiv var självfallssystemet marginellt bättre, givet att riskeffekterna inte rankades inbördes. Kapacitetsmässigt dimensioneras självfallssystem för nästan det dubbla flödet jämfört med trycksatt system, vilket ger det trycksatta systemet en kapacitet mer anpassad till behovet. Generellt sett antydde resultatet att trycksatt system var mer gynnsamt vid glesare bebyggelse. / As a result of stricter treatment requirements and city expantion the length of the sewer network is steadily increasing. To drain wastewater by gravity requires a continuous slope which often results in great excavation - a very costly part in the process. An advantageous alternative could be a pressurized sewer system, which has been a useful complement to traditional gravity systems in hilly or rocky areas since the 70’s. Even though pressurized sewer systems lately have tended to be more frequently used outside their common application area due to stricter requirements on treatment and cost-efficiency, gravity systems are still the most common sewer system in urban areas. Concerning this, it would be intresting to investigate which of the two systems that suites a residental area on the outskirts of a city center best, since the area is outside the traditional usage of the two established systems. In addition it would be interesting for the wastewater industry in general to investigate how the two systems compare.  For this reason the aim of this master thesis was to compare pressure sewer systems with gravity systems on the basis of economy, environment and capacity. In addition, it was examined whether any general conclusions could be determined from the case study. The survey was based on a residental area in the outskirts of Fredrikstad city center, recently designed with a gravity system. A theoretical pressure sewer system was designed. Economy was evaluated based on the operating and maintenance costs and basic and reinvestment costs. The capacity was compared numerically and through design templates. As for the environmental comparison, an evaluation was done on the basis of reports from the Swedish Water & Wastewater Association and Norwegian Water BA. An expansion to double the number of real properties was planned for the area of study, which proved to be crucial to the financial results. The gravity system was most appropriate from an economic standpoint and the vital factor was the high investment and operating costs for the pumping units. Even from an environmental point of view, the gravity system was maginally better. Given that the risk effects are not ranked relative to each other. In terms of capacity the gravity system was dimensioned for almost twice the flow compared to the pressure sewer systems, which gave the pressure sewer system a more adusted capacity. The result indicated that the pressure sewer system is favorable in densely built flexible areas.

The graphene moiré superstructure formed on Ru(0001) (g/Ru(0001)) has shown the potential as a template to self-assemble super-lattices of metal nanoparticles as model catalysts. To explore the possibility of rational catalyst design on g/Ru(0001), detailed density functional theory (DFT) calculations have been performed to investigate the adsorption and diffusion of Rh and Au adatoms on g/Ru(0001). The consequences of different hopping rates for cluster nucleation have been explored by performing Monte Carlo-based statistical analysis, which suggests that diffusing species other than adatoms need to be taken into account to develop an accurate description of cluster nucleation and growth on this surface. DFT calculations have also been carried out to investigate the adsorption and diffusion of 18 4d (Y-Ag) and 5d (La-Au) transition metal adatoms on g/Ru(0001). Given the necessity to study larger diffusing species than adatoms, DFT calculations have been performed to study the adsorption and diffusion of Rh and Au dimers and trimers on g/Ru(0001). It was shown that the mobility of Rh clusters decreases with the increase of cluster size, while for Au, dimers diffuse faster than monomers and trimers on the moiré surface. We then used a genetic algorithm combined with DFT calculations to predict the lowest energy structure of a Au8 cluster on g/Ru(0001). Our prediction leads us to propose that Au clusters aggregates through Oswald ripening with Au dimer being the major diffusing species. Finally, we examined the morphology of a Cu19 cluster on g/Cu(111) using MD simulations with COMB3 potential. We also studied the mobility of Cu clusters on g/Cu(111) at elevated temperatures. The analysis suggests that g/Cu(111) may not be a suitable substrate for the formation and growth of isolated Cu clusters. All these calculation results have provided us a better understanding and useful insights into the nucleation and growth mechanism of metal clusters on graphene moiré.

No description available.

The CANDU Supercritical Water-Cooled Reactor’s extreme operating conditions and single-loop design have fuelled a need for better understanding of hydrothermal chemistry. This thesis reports the thermal stability and decomposition kinetics of perchloric acid in quartz and Pyrex® cells. HClO4 is an appropriate internal standard for Raman measurements of nickel(II) chloro complexes in quartz cells up to 200 ºC Raman spectroscopy. This thesis also reports the first Raman spectra for Ni2+, NiCl+ and NiCl2 from 8 to 120 ºC. Due to very weak bands and overlap of the contributing species, a thermodynamic speciation model, principle component analysis, and quantum mechanical predictions of the nickel(II) chloro Raman spectra were required to assign peaks. The assignment was confirmed by calculating temperature independent scattering coefficients from the spectra. This is the first study to obtain a spectrum for NiCl2 below 100 ºC. / University of Guelph, Atomic Energy of Canada Limited (AECL), Bruce Power, University Network of Excellence in Nuclear Engineering (UNENE), National Sciences and Engineering Research Council of Canada (NSERC), Natural Resources Canada, Ontario Power Generation (OPG), Canada Foundation for Innovation

This dissertation research is focused on first principles studies of graphene and single organic molecules for nanoelectronics applications. These nanosized objects attracted considerable interest from the scientific community due to their promise to serve as building blocks of nanoelectronic devices with low power consumption, high stability, rich functionality, scalability, and unique potentials for device integration. Both graphene electronics and molecular electronics pursue the same goal by using two different approaches: top-down approach for graphene devices scaling to smaller and smaller dimensions, and bottom-up approach for single molecule devices. One of the goals of this PhD research is to apply first-principles density functional theory (DFT) to study graphene/metal and molecule/metal contacts at atomic level. In addition, the DFT-based approach allowed us to predict the electronic characteristics of single molecular devices. The ideal and defective graphene/metal interfaces in weak and strong coupling regimes were systematically studied to aid experimentalists in understanding graphene growth. In addition, a theory of resonant charge transport in molecular tunnel junctions has been developed. The first part of this dissertation is devoted to the study of atomic, electronic, electric, and thermal properties of molecular tunnel junctions. After describing the model and justifying the approximations that have been made, the theory of resonant charge transport is introduced to explain the nature of current rectification within a chemically asymmetric molecule. The interaction of the tunneling charges (electrons and holes) with the electron density of the metal electrodes, which in classical physics is described using the notion of an image potential, are taken into account at the quantum-mechanical level within the tight binding formalism. The amount of energy released onto a molecule by tunneling electrons and holes in the form of thermal vibration excitations is related to the reorganization energy of the molecule, which is also responsible for an effective broadening of molecular levels. It was also predicted that due to the asymmetry of electron and hole resonant energy levels with respect to the Fermi energy of the electrodes, the Joule heating released from the metallic electrodes is also non-symmetric and can be used for the experimental determination of the type of charge carriers contributing to the molecular conductance. In the second part of the dissertation research ideal and defective graphene/metal interfaces are studied in weak and strong interface coupling regimes. The theoretical predictions suggest that the interface coupling may be controlled by depositing an extra metallic layer on top of the graphene. DFT calculations were performed to evaluate the stability of a surface nickel carbide, and to study graphene/carbide phase coexistence at initial stages of graphene growth on Ni(111) substrate at low growth temperatures. Point defects in graphene were also investigated by DFT, which showed that the defect formation energy is reduced due to interfacial interactions with the substrate, the effect being more pronounced in chemisorbed graphene on Ni(111) substrate than in physisorbed graphene on Cu(111) substrate. Our findings are correlated with recent experiments that demonstrated the local etching of transfered graphene by metal substrate imperfections. Both graphene and molecular electronics components of the PhD dissertation research were conducted in close collaboration with several experimental groups at the University of South Florida, Brookhaven National Laboratory, University of Chicago, and Arizona State University.

Glass materials surround us, impacting our lives on a daily basis, whether geologically deposited by volcanic activity or synthesized in large volume by industry. These amorphous oxide materials are vastly important due to their variety of applications including solid electrolytes, cookware, and storage of high-level nuclear waste. Although they are used for different applications, one common characteristic of these materials is the absence of long-range periodic order. This makes it difficult to use traditional solid-state characterization methods such as x-ray and neutron diffraction to study glass structure. Nuclear magnetic resonance (NMR), is ideally suited to study materials that exhibit short-range non-periodic order as it probes directly at a nucleus of interest and is sensitive to its local structural environment. This ability of solid-state NMR is illustrated by revealing local structural features in various oxide materials presented in this thesis. Within is a compilation of studies looking at basic borates, followed by borovanadates and complex borosilicate glasses. A multinuclear application of using quantum chemical calculations, single and double resonance methods and charge-balance models are discussed to deconvolute the complex structures of these disordered materials. This is followed by a study of a difficult low-gamma nucleus, 73Ge, (once considered “impossible” for solid-state NMR) which is explored for future material studies by looking at 73Ge NMR of crystalline and glassy germanates. 73Ge chemical shifts were related to coordination environments and quadrupolar coupling constants were related to bond length distortions.