In this dissertation, an innovative approach combining continuum mechanics and atomistic simulations is exposed to develop a nanomechanics theory for modeling and predicting the macroscopic behavior of nanomaterials. This nanomechanics theory exhibits the simplicity of the continuum formulation while taking into account the discrete atomic structure and interaction near surfaces/interfaces. There are four primary objectives to this dissertation. First, theory of interfaces is revisited to better understand its behavior and effects on the overall behavior of nanostructures. Second, atomistic tools are provided in order to efficiently determine the properties of free surfaces and interfaces. Interface properties are reported in this work, with comparison to both theoretical and experimental characterizations of interfaces. Specifically, we report surface elastic properties of groups 10 11 transition metals as well as properties for low-CSL grain boundaries in copper. Third, we propose a continuum framework that casts the atomic level information into continuum quantities that can be used to analyze, model and simulate macroscopic behavior of nanostructured materials. In particular, we study the effects of surface free energy on the effective modulus of nano-particles, nanowires and nano-films as well as nanostructured crystalline materials and propose a general framework valid for any shape of nanostructural elements / nano-inclusions (integral forms) that characterizes the size-dependency of the elastic properties. This approach bridges the gap between discrete systems (atomic level interactions) and continuum mechanics. Finally this continuum outline is used to understand the effects of surfaces on the overall behavior of nano-size structural elements (particles, films, fibers, etc.) and nanostructured materials. More specifically we will discuss the impact of surface relaxation, surface elasticity and non-linearity of the underlying bulk on the properties nanostructured materials.

The [2,3]-sigmatropic rearrangement is a pericyclic reaction of great synthetic utility to organic chemists. Within the scope of this reaction exist some cases in which the product corresponding to a [1,2] rearrangement is formed, despite the fact this is a forbidden process. Generally this is explained by a radical dissociation-recombination pathway; however, studies into the failure of transition state theory and the necessity to incorporate dynamic effects into mechanistic theory lead us to believe such products may arise from these phenomena. In particular, the possibility that many of these products result from an “unsymmetrical bifurcating surface” in the potential energy landscape is intriguing. To investigate this possibility, the Sommelet-Hauser rearrangement of N-allyl-N,N-dimethylglycine methyl ester was explored. The combined use of experimental and theoretically predicted kinetic isotope effects (KIEs) has been previously shown to deliver great mechanistic insight into reactions. The combination of these techniques, however, has found little employ in studying [2,3] rearrangements. This combination was used to study this reaction, using the Singleton method for determining small heavy-atom isotope effects. Resulting experimental KIEs suggest the reaction proceeds by an asynchronous, concerted, early transition state, and is relatively exothermic. This agrees with previous studies and Hammond’s postulate. Predicted theoretical KIEs are in good agreement with experimental KIEs, and the associated transition structure confirms the results suggested by experiment. Interestingly, as calculations proceed from gas phase to solvent models, the activation barrier of the reaction increases, while its exothermicity decreases. The energy difference determined between the lowest and second lowest energy transition structures decreases to 0.81 kcal/mol in the PCM model, so we cannot exclude the contribution of this transition structure to the reaction. However, qualitative results from the associated KIEs and energetics are consistent with the lowest energy transition structure. This reaction does not seem to afford the [1,2] product, and most likely dynamic effects are insignificant in determining product distribution. However, the study has validated, with respect to this body of reactions, both the use of the Singleton method for KIE determination and the combination of these experimental and theoretical techniques.

Historical Turkish baths still keeping their functional systems represent their original architectural and building technologies. Studies on the functional systems of historical baths are therefore needed to discover such technologies and to maintain them in working order. This study was conducted on a 15th century historical Turkish bath, Seng&uuml / l Hamami, in Ankara for assessment of its water supply and drainage systems. These systems comprised of hot and cold-water supply, wastewater and rainwater drainage, were examined in terms of their adequacy, capacity and faults. Comparisons were made with certain other historical Turkish baths to determine their original water storage and consumption capacities. The investigations were made by using non-destructive methods. Among them, the calculation methods used for discharge capacity assessment of drainage systems in Seng&uuml / l Hamami and consumption capacities of its water supply system were adapted and developed from the calculation methods used for contemporary buildings. Serious dampness problems arising from certain roof drainage faults were identified in the building. The wastewater collection and discharge system was found to have serious problems due to improper grading and inadequate flow dimensions of drains and wastewater channels. The ideal situation for the improvement of discharge systems was discussed together with some suggestions on the urgent remedial interventions, preventive measures and future improvements. The methods developed in this study were considered useful for the calculation of adequacy and capacity of wastewater and roof drainage systems and of water storage and consumption capacities of water supply system for the other historical baths.

The goal of solid state physics and chemistry is to gain deeper understanding of the basic principles of condensed matter. This ongoing process is achieved by the combination of experimental methods and theoretical models. One theoretical approach are the so-called first-principles calculations, which are based on the concept of density functional theory (DFT). In order to test the reliability of a band structure calculation, its results have to be compared with experiments. Since the electron density, the main constituent of DFT codes, cannot be directly determined experimentally with sufficient accuracy (e.g., by X-ray diffraction), other experimentally available properties are needed for the comparison with the calculation. A quantity that can be measured with high accuracy and that provides indirect information about the electron density is the electric field gradient (EFG). The EFG reflects local structural symmetry properties of the charge distribution surrounding a nucleus: the EFG is nonzero if the density deviates from cubic symmetry and therefore generates an inhomogeneous electric field at the nucleus. Since the EFG is highly sensitive to structural parameters and to disorder, it is a valuable tool to extract structural information. Furthermore, the evaluation of the EFG can provide valuable insight into the chemical bonding. Whereas the experimental determination of the quadrupole frequency and the closely related EFG has been possible for more than 70 years, reliable values for calculated EFGs could not be obtained before 1985, when an EFG module was implemented in the full-potential, linearised-augmented-plane-wave code WIEN. Since the full-potential local-orbital minimum-basis scheme FPLO is numerically very efficient and its local-orbital scheme allows an easy analysis of the different contributions to the EFG, one goal of this work was the implementation of an EFG module within the FPLO code. The newly implemented EFG module was applied to different systems: starting from simple metals, then approaching more complex systems and finally tackling strongly correlated oxides. Simultaneously, the EFGs for the studied compounds were determined experimentally by NMR spectroscopists. This close collaboration enables the comparison of the calculated EFGs with the experimental observations, which makes it possible to extract more physical and chemical information from the measured values regarding structural relaxation, distortion, the chemical bond or the relevance of electron correlation. In the last part of this work, the importance of corrections that go beyond the EFG are discussed. Such corrections arise for any multipole order of the hyperfine interactions, and are due to electron penetration into the nucleus. A correction similar to the isomer shift, coined here the "quadrupole shift" is examined in detail.

No description available.

The EN Eurocodes are a new series of standards for construction design in Europe. The development of these codes started originally in 1975 and in present time the progressing work is at the national calibration stage. The goal is to create a common standard for the design of buildings and other civil engineering works throughout Europe and beyond. The purpose is to increase the free circulation of construction products and engineering services. Since the transition to the new standards is getting closer, the constructing engineers and companies will soon stand before great changes. This is why Kadesjös Ingenjörsbyrå AB asked me to do an analysis of the first part of the new standard, i.e. Eurocode 1990, and look at the differences among the existing standards in Sweden and the Eurocodes. The result of this is summarized not only in the report but also in a “User’s manual” which is presented in appendix 1 attached to the report. A limited study of the environmental effects of the transition to Eurocode EN 1990 has also been done. By comparing design calculations of a normal beam in three different materials, steel, concrete and glued laminated timber, one can, for instance, get a general view of how the differences of the two standards affect the required quantity of material. To get an insight of the different opinions that might exist concerning the new standard, a survey based on interviews of a few constructional engineers has been done. There was also discussed if any, and in that case what kind of preparations constructors and design companies are performing to be well prepared when the transition comes.

Water is an important substance. It is part of us, of our environment, and is a fundamental prerequisite for the existence of life as we know it. The structure of water is still, after over 100 years of research on the subject, however under debate. In this thesis x-ray absorption spectroscopy (XAS) and reverse Monte Carlo (RMC) modeling are used to search for structural solutions of water consistent with many different experimental data sets, with emphasis on the combination of different experimental techniques for a reliable structure determination. Neutron and x-ray diffraction are analyzed in combination with the more recent synchrotron radiation based XAS. Geometrical criteria for H-bonding are implemented in RMC to drive the fits and allow to evaluate differently H-bonded structure models against the data. It is shown that the available diffraction data put little constraints on the type of H-bond topology or O-O-O tetrahedrality for the structure of liquid water. It is also demonstrated that classical MD simulations, using some of the most common interaction potentials for water, give rise to O-O and O-H pair-correlation functions with too sharp first peaks at too short distances to be in agreement with diffraction, and furthermore that requiring a large fraction of broken H-bonds is not in itself enough for a structure model to reproduce the experimental XAS. A contribution to the theoretical description of XAS is made by an in-depth investigation of important technical aspects of the TP-DFT spectrum calculations. A novel approach to RMC, applicable also to data that require a significant amount of computer time to evaluate, is developed which makes use of pre-computed properties from a large set of local geometries allowing RMC simulations directly on data from core-level spectroscopies such as XAS. / At the time of the doctoral defense, the following papers were unpublished and had a status as follows: Paper 4, 5 and 6: Submitted

The structural and mechanical properties of s-I methane hydrate have been investigated by first principles calculations. For the first time, the fully elastic constant tensor of s-I methane hydrate is obtained entirely ab-initio. The calculated lattice parameter, bulk modulus, and elastic constants were found to be in good agreement with experimental data at ambient pressure. The Young modulus, Poisson ratio and bulk sound velocities are estimated from the calculated elastic constants and compared with wave speed measurements available.

First- principles modeling is used to predict hydrogen permeability through Palladium (Pd)-rich binary alloy membranes as a function of temperature and H2 pressure. We introduce a simplified model that incorporates only a few factors and yields quantitative prediction. This model is used to predict hydrogen permeability in a wide range of binary alloy membranes and to find promising alloys that have high hydrogen permeability. We show how our efficient Density Functional Theory (DFT)-based model predicts the chemical stability and proton conductivity of doped barium zirconate (BaZrO3), barium stannate (BaSnO3), and barium hafnate (BaHfO3). Our data is also used to explore the physical origins of the trends in chemical stability and proton conductivity among different dopants. We also study potassium tantalate (KTaO3), which is a prototype perovskite, to examine the characteristics of undoped perovskites. Specifically, we study the impacts of isotope effects, tunneling effects, and native point defects on proton mobility in KTaO3. It is important to find and develop solid-state Li-ion electrolyte materials that are chemically stable and have high ionic conductivities for high performance Li-ion batteries. We show how we predict the chemical stability of Li7La3Zr2O12, Li7La3Sn2O12, and Li7La3Hf2O12 with respect to carbonate and hydroxide formation reactions.

The present state of modeling radio-induced effects at the cellular level neglects to account for the microscopic inhomogeneity of the nucleus from the non-aqueous contents by approximating the entire cellular nucleus as a homogenous medium of water. Charged particle track-structure calculations utilizing this principle of superposition are thereby neglecting to account for approximately 30% of the molecular variation within the nucleus. To truly understand what happens when biological matter is irradiated, charged particle track-structure calculations need detailed knowledge of the secondary electron cascade, resulting from interactions with not only the primary biological component – water – but also the non-aqueous contents, down to very low energies. This paper presents developments for a novel approach, which to our knowledge has never been done before, to reducing the homogenous water approximation. The purpose of our work is to develop of a completely self-consistent computational method for predicting molecule-specific ionization, excitation, and scattering cross sections in the very low energy regime that can be applied in a condensed history Monte Carlo track-structure code. The present methodology begins with the calculation of a solution to the many-body Schrödinger equation and proceeds to use Monte Carlo methods to calculate the perturbations in the internal electron field to determine the aforementioned processes. Results are computed for molecular water in the form of linear energy loss, secondary electron energies, and ionization-to-excitation ratios and compared against the low energy predictions of the GEANT4-DNA physics package of the Geant4 simulation toolkit.