Les géopolymères apparaissent comme une alternative potentielle aux liants hydrauliques classiques. Ces aluminosilicates alcalins sont des matériaux amorphes produits à partir de métakaolin, ou de cendres volantes réagissant avec une liqueur d'hydroxyde, ou de silicate alcalin. Cette thèse a pour but d'évaluer le potentiel des géopolymères pour la construction des puits de pétrole. Il s'agit de combler un déficit de caractérisation et de compréhension sur le comportement rhéologique, et sur l'évolution mécanique et chimique, du gâchage à la prise des géopolymères. Pour ce faire, des méthodes aussi diverses que la RMN, le SAXS, la DLS et l'USWR ont été mobilisées pour expliquer les observations rhéologiques et mécaniques. Dans un premier temps, nous avons étudié la viscosité d'un des réactifs de la géopolymérisation : la liqueur alcaline. Nous avons montré que les variations de viscosité peuvent être expliquées par des considérations de volumes effectifs des espèces en solution. Les variations de ces volumes effectifs en fonction de la composition peuvent être rationalisées en invoquant le phénomène de volume d'excès molaire, lié à la solvatation des ions, ainsi que l'organisation de la liqueur en paires d'ions. Une fois la viscosité de la liqueur connue, il est possible de suivre l'évolution des propriétés rhéologiques de la suspension de métakaolin lors des premières heures de la réaction, en fonction de la composition et de la température. Finalement, un suivi combiné de la dissolution du métakaolin par RMN du solide et du développement des propriétés mécaniques de la matrice géopolymère du gâchage au durcissement par USWR nous a permis de conclure au caractère limitant de l'étape de dissolution du métakaolin.

<p>In this dissertation is exemplified how different laser based methods are applied in high-resolution spectroscopic studies of internal properties of diatomic molecules.</p><p>A molecular beam apparatus assembly is described, where a laser ablation source is combined with a time-of-flight mass spectrometer. Compounds investigated with this equipment are hafnium sulfide and hafnium oxide. The molecules are excited and ionized applying the resonant two-photon ionization (R2PI) scheme, which is a sensitive absorption and detection technique for probing the population of an excited state.</p><p>By means of the DC Stark effect, permanent electric dipole moments of HfS in the <i>D</i> ¹Π state and HfO in the <i>b</i> ³Π₁ state are determined while the molecules are exposed to a static electric field. Under field-free conditions low temperature rotationally resolved spectra are recorded, generating line positions from which molecular parameters are derived.</p><p>The R2PI method, modified with an adjustable delay time, is also used in lifetime measurements of individual rotational levels of the HfS <i>D</i>¹Π and HfO<i> b</i> ³Π₁ states. Oscillator strengths for transitions from the ground state are calculated, and in this connection basic concepts like Einstein coefficients, line strengths and Hönl-London factors, are surveyed. Theoretical calculation of lifetimes is discussed in view of the fact that a commonly available computer program (LEVEL 7.5 by Le Roy) gives erroneous output.</p><p>Some coherence and quantum interference related phenomena, such as electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting, are presented in the latter part of this thesis. Fundamental concepts and relations are introduced and explained. The driven three-level cascade system is elucidated, including some of its experimental applications to alkali metal dimers, Na₂ and Li₂.</p><p>A triple resonance spectroscopy experiment is described in terms of a three-laser, four-level inverted-Y excitation scheme, implemented in Na₂. The accompanying density matrix formalism, providing the basis for theoretical simulations, is accounted for. From analysis of the results an absolute value of the electric dipole moment matrix element (transition moment) is extracted, using the AC Stark effect.</p><p>Some recently reported unexpected experimental results and unforeseen features, occurring in Doppler broadened samples and related to the open character of molecular systems, are briefly commented.</p>

<p>This thesis presents briefly the application of quantum mechanics on systems ofchemical interest, i.e., the field of quantum chemistry and computational chemistry.The molecules of the ten-electron series, hydrogen fluoride, water, ammonia,methane and neon, are taken as computational examples. Some applications ofquantum chemistry are then shown on these systems, with emphasis on the natureof the molecular bonds. Conceptual methods of chemistry and theoreticalchemistry for these systems are shown to be valid with some restrictions, as theseinterpretations does not represent physically measurable entities.The orbitals and orbital energies of neon is studied, the binding van der Waalsinteractionresulting in a Ne2 molecule is studied with a theoretical bond lengthof 3.23 °A and dissociation energy of 81.75 μEh. The equilibrium geometries ofFH, H2O, NH3 and CH4 are studied and the strength and character of the bondsinvolved evaluated using bond order, dipole moment, Mulliken population analysisand L¨owdin population analysis. The concept of electronegativity is studied in thecontext of electron transfer. Lastly, the barrier of inversion for NH3 is studied, withan obtained barrier height of 8.46 mEh and relatively constant electron transfer.</p>

The methods that fueled the microscale revolution (top-down design/fabrication, combined with application of forces large enough to overpower stochasticity) constitute an approach that will not scale down to nanoscale systems. In contrast, in nanotechnology, we strive to embrace nature’s quite different paradigms to create functional systems, such as self-assembly to create structures, exploiting stochasticity, rather than overwhelming it, in order to create deterministic, yet highly adaptable, behavior. Nature’s approach, through billions of years of evolutionary development, has achieved self-assembling, self-duplicating, self-healing, adaptive systems. Compared to microprocessors, nature’s approach has achieved eight orders of magnitude higher memory density and three orders of magnitude higher computing capacity while utilizing eight orders of magnitude less power. Perhaps the most complex of functions, homeostatis by a biological cell – i.e., the regulation of its internal environment to maintain stability and function – in a fluctuating and unpredictable environment, emerges from the interactions between perhaps 50M molecules of a few thousand different types. Many of these molecules (e.g. proteins, RNA) are produced in the stochastic processes of gene expression, and the resulting populations of these molecules are distributed across a range of values. So although homeostasis is maintained at the system (i.e. cell) level, there are considerable and unavoidable fluctuations at the component (protein, RNA) level. While on at least some level, we understand the variability in individual components, we have no understanding of how to integrate these fluctuating components together to achieve complex function at the system level. This thesis will explore the regulation and control of stochasticity in cells. In particular, the focus will be on (1) how genetic circuits use noise to generate more function in less space; (2) how stochastic and deterministic responses are co-regulated to enhance function at a system level; and (3) the development of high-throughput analytical techniques that enable a comprehensive view of the structure and distribution of noise on a whole organism level.

voir a l'interieur du fichier pdf

In this dissertation is exemplified how different laser based methods are applied in high-resolution spectroscopic studies of internal properties of diatomic molecules. A molecular beam apparatus assembly is described, where a laser ablation source is combined with a time-of-flight mass spectrometer. Compounds investigated with this equipment are hafnium sulfide and hafnium oxide. The molecules are excited and ionized applying the resonant two-photon ionization (R2PI) scheme, which is a sensitive absorption and detection technique for probing the population of an excited state. By means of the DC Stark effect, permanent electric dipole moments of HfS in the D 1Π state and HfO in the b 3Π1 state are determined while the molecules are exposed to a static electric field. Under field-free conditions low temperature rotationally resolved spectra are recorded, generating line positions from which molecular parameters are derived. The R2PI method, modified with an adjustable delay time, is also used in lifetime measurements of individual rotational levels of the HfS D 1Π and HfO b 3Π1 states. Oscillator strengths for transitions from the ground state are calculated, and in this connection basic concepts like Einstein coefficients, line strengths and Hönl-London factors, are surveyed. Theoretical calculation of lifetimes is discussed in view of the fact that a commonly available computer program (LEVEL 7.5 by Le Roy) gives erroneous output. Some coherence and quantum interference related phenomena, such as electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting, are presented in the latter part of this thesis. Fundamental concepts and relations are introduced and explained. The driven three-level cascade system is elucidated, including some of its experimental applications to alkali metal dimers, Na2 and Li2. A triple resonance spectroscopy experiment is described in terms of a three-laser, four-level inverted-Y excitation scheme, implemented in Na2. The accompanying density matrix formalism, providing the basis for theoretical simulations, is accounted for. From analysis of the results an absolute value of the electric dipole moment matrix element (transition moment) is extracted, using the AC Stark effect. Some recently reported unexpected experimental results and unforeseen features, occurring in Doppler broadened samples and related to the open character of molecular systems, are briefly commented.

Quantum chemistry has nowadays become a powerful and efficient tool that can be successfully used for studies of biosystems. It is therefore possibleto model the enzyme active-site and the reactions undergoing into it, as well as obtaining quite accurate energetic profiles. Important conclusions can be drawn from such profiles about the  plausibility of different putative mechanisms. Density Functional Theory is used in the present thesis for investigation of the catalytic mechanism of dioxygenase metallo-enzymes and synthetic model complexes. Three enzymes were studied – Homoprotocatechuate 2,3-dioxygenase isolated from Brevibacterium fuscum (Bf 2,3-HPCD), Manganese-Dependent Homoprotocatechuate 2,3-Dioxygenase (MndD) and Homogentisate Dioxygenase (HGD). Models consisting of 55 to 208 atoms have been built from X-ray crystal structures and used in the calculations. The computed energies were put in energy curves and were used for estimation of the feasibility of the suggested reaction mechanisms. A non-heme [(L4Me4)Fe(III)]+3 complex that mimics the reactivity of intradiol dioxygenases, and a heme [T(o-Cl)PPFe] complex catalyzing the stepwise oxidation of cyclohexane to adipic acid, were also studied. For the enzymes and the non-heme biomimetic complex the reaction was found to follow a mechanism that was previously suggested for extradiol and intradiol dioxygenases – ordered substrates binding and formation of peroxo species, which further undergoes homolytic O-O bond cleavage. Different reaction steps appear to be rate limiting in the particular cases: proton transfer from the substrate to the peroxide in Bf 2,3-HPCD, the formation of the peroxo bridge in HGD and the biomimetic complex, and notably, spin transition in MndD. The catalytic oxidation of cyclohexane to adipic acid in the presence of molecular oxygen as oxidant was studied, a reaction of great importance for the chemical industry. Reaction mechanism is suggested, involving several consecutive oxidative steps. The highest calculated enthalpy of activation is 17.8 kcal/mol for the second oxidative step. / At the time of the doctoral defense, the following papers were unpublished and had a status as follows: Paper 4: In progress, Paper 5: In progress

The structure, bonding and chemistry of water and hydroxyl on metal surfaces are presented. Synchrotron based x-ray photoelectron- and x-ray absorption spectroscopy along with density functional theory calculations mainly form the basis of the results. Conditions span the temperature range 35 - 520 K and pressures from ultra-high vacuum (~10 fAtm) to near ambient pressures (~1 mAtm). The results provide, e.g, new insights on the importance of hydrogen bonding for surface chemical kinetics. Water adsorbs intact on the Pt(111), Ru(001) and Cu(110) surfaces at low temperatures forming 2-dimensional wetting layers where bonding to the metal (M) mainly occurs via H2O-M and M-HOH bonds. Observed isotope differences in structure and kinetics for H2O and D2O adsorption on Ru(001) are due to qualitatively different surface chemistries. D2O desorbs intact but H2O dissociates in kinetic competition with desorption similar to the D2O/Cu(110) system. The intact water layers are very sensitive to x-ray and electron induced damage. The mixed H2O:OH phase on Ru(001) consists of stripe-like structures 4 to 6 Ru lattice parameters wide where OH decorates the edges of the stripes. On Pt(111), two different long-range ordered mixed H2O:OH structures are found to be inter-related by geometric distortions originating from the asymmetric H-bond donor-acceptor properties of OH towards H2O. Water adsorption on Cu(110) was studied at near ambient conditions and compared to Cu(111). Whereas Cu(111) remains clean, Cu(110) holds significant amounts of water in a mixed H2O:OH layer. The difference is explained by the differing activation barriers for water dissociation, leading to the presence of OH groups on Cu(110) which lowers the desorption kinetics of water by orders of magnitude due to the formation of strong H2O-OH bonds. By lowering the activation barrier for water dissociation on Cu(111) by pre-adsorbing atomic O, generating adsorbed OH, similar results to those on Cu(110) are obtained.

This thesis presents briefly the application of quantum mechanics on systems ofchemical interest, i.e., the field of quantum chemistry and computational chemistry.The molecules of the ten-electron series, hydrogen fluoride, water, ammonia,methane and neon, are taken as computational examples. Some applications ofquantum chemistry are then shown on these systems, with emphasis on the natureof the molecular bonds. Conceptual methods of chemistry and theoreticalchemistry for these systems are shown to be valid with some restrictions, as theseinterpretations does not represent physically measurable entities.The orbitals and orbital energies of neon is studied, the binding van der Waalsinteractionresulting in a Ne2 molecule is studied with a theoretical bond lengthof 3.23 °A and dissociation energy of 81.75 μEh. The equilibrium geometries ofFH, H2O, NH3 and CH4 are studied and the strength and character of the bondsinvolved evaluated using bond order, dipole moment, Mulliken population analysisand L¨owdin population analysis. The concept of electronegativity is studied in thecontext of electron transfer. Lastly, the barrier of inversion for NH3 is studied, withan obtained barrier height of 8.46 mEh and relatively constant electron transfer.

Organometallic pyridazines and compounds derived from them have been of interest in polymer research due to their atypical environmental stability (as compared to other non-aromatic organic semiconductors) as well as their conductivity. The off-metal synthesis and characterization of several pyridazyl thallium, manganese, and rhenium complexes, beginning with fulvenes 1,2- C5H3(COHR)(COR), are reported here. The diacyl fulvenes were treated with hydrazine hydrate to ring close to pyridazines. Next, the pyridazines were converted to their respective thallium salts through treatment with thallium (I) ethoxide. Lastly, the salts were transmetallated into the respective rhenium or manganese complexes through treatment with the respective metal bound to five carbonyl groups and one bromide (MnCO5Br, ReCO5Br). Our research focused on the synthesis of a variety of 5,6-fused ring pyridazines that will act as a model for homeland security research in polymer studies and medicinal research. Synthesis and characterization of several aryl-substituted 5,6-fused ring pyridazines have been completed. The fulvenes, pyridazines, and thallium salts are important compounds for research due to their reactivity and stability in moisture and air. The complexes synthesized were confirmed using mass spectrometry, infrared spectroscopy, nuclear magnetic resonance spectroscopy, and elemental analysis. Single crystal X-ray diffraction confirmed the structure of x compound 1A. As evidenced by related previous papers published by the research group, the synthesized complexes displayed stability to air, moisture, and temperature.18, 19, 23, 25