With current energy demands globally and locally, nuclear energy remains one of the top competitors for cleaner and sustainable energy. The nuclear industry requires more inherent safety and proliferation resistance in reactor design. Thorium has therefore been identified as a possible fuel for future nuclear reactors that can comply with these requirements. However current extraction techniques are expensive, time consuming and generate large quantities of hazardous waste. A possible alternative to conventional solvent extraction of thorium is SFE (Supercritical Fluid Extraction). A monazite sample from the Steenkampskraal mine was investigated using SEM (Scanning Electron Microscope) analysis methods to determine the distribution of thorium in the grains that could potentially complicate the effectiveness of the SFE extraction method if zoning is present. The results show a homogeneous distribution with no discernable zonation in the grains. The concentration of Th, Ce and Nd was determined by quantitative MPA (Micro Probe Analysis). The results obtained from the MPA point analysis on several grains show average Th, Ce and Nd concentrations of 6.5 wt. %, 24.1 wt. % and 9.7 wt. % respectively. The extraction of Th+4 from a filter paper was conducted to verify the extraction procedure and extractability of transition elements employing SFE. The extraction was conducted using supercritical CO2 and methanol as co-solvent with TBP (Tributyl Phosphate) and HFA (Hexafluoroacetylacetone) added in situ as chelates. ICP-MS results for the Th+4 extraction procedure showed extraction efficiency of 53 % compared to 83 % in literature (Kumar et al. 2009). This marked difference in extraction efficiency is attributed to ineffective trapping methods employed and lack of prior maintenance and support on the extraction apparatus. Subsequently all further extracted samples of Th from monazite were tested using XRF analysis methods. Due to the lack of prior maintenance on the extraction apparatus several technical breakdowns were encountered and addressed from a mechanical engineering standpoint. The operational effectiveness of the modified apparatus was verified through the extraction of marula seed oil and compared with another supercritical fluid (SF) extractor to show 50 % extraction efficiency in each case. A review of the literature indicated that the crystal chemical requirements for substitution of trivalent (Ce+3) for tetravalent (Th+4) may be fulfilled during SFE processes. Experimental substitution extractions were conducted by addition of different chelates and were conducted by subjecting the monazite samples to 20 MPa pressure for 180 min static flow and 10 min continuous flow extraction times with a CO2 flow rate of 2 mL/min with 10 % co-solvent flow rate. The results of the two sets of substitution extractions namely α and β show no clear indication of Th extraction. The maximum theoretical efficiency obtainable under current extraction equipment limitations was calculated as 12%. The XRF analysis error margin was given by the analytical laboratory as 10 %. The literature has shown the substitution of trivalent cations for tetravalent cations in the monazite structure to be a valid reaction mechanism. The experimental results showed little or no success in extracting thorium from monazite. In order to prove the practical feasibility of thorium extraction several changes to the experimental operating conditions is required. / MIng (Mechanical Engineering), North-West University, Potchefstroom Campus, 2015

With current energy demands globally and locally, nuclear energy remains one of the top competitors for cleaner and sustainable energy. The nuclear industry requires more inherent safety and proliferation resistance in reactor design. Thorium has therefore been identified as a possible fuel for future nuclear reactors that can comply with these requirements. However current extraction techniques are expensive, time consuming and generate large quantities of hazardous waste. A possible alternative to conventional solvent extraction of thorium is SFE (Supercritical Fluid Extraction). A monazite sample from the Steenkampskraal mine was investigated using SEM (Scanning Electron Microscope) analysis methods to determine the distribution of thorium in the grains that could potentially complicate the effectiveness of the SFE extraction method if zoning is present. The results show a homogeneous distribution with no discernable zonation in the grains. The concentration of Th, Ce and Nd was determined by quantitative MPA (Micro Probe Analysis). The results obtained from the MPA point analysis on several grains show average Th, Ce and Nd concentrations of 6.5 wt. %, 24.1 wt. % and 9.7 wt. % respectively. The extraction of Th+4 from a filter paper was conducted to verify the extraction procedure and extractability of transition elements employing SFE. The extraction was conducted using supercritical CO2 and methanol as co-solvent with TBP (Tributyl Phosphate) and HFA (Hexafluoroacetylacetone) added in situ as chelates. ICP-MS results for the Th+4 extraction procedure showed extraction efficiency of 53 % compared to 83 % in literature (Kumar et al. 2009). This marked difference in extraction efficiency is attributed to ineffective trapping methods employed and lack of prior maintenance and support on the extraction apparatus. Subsequently all further extracted samples of Th from monazite were tested using XRF analysis methods. Due to the lack of prior maintenance on the extraction apparatus several technical breakdowns were encountered and addressed from a mechanical engineering standpoint. The operational effectiveness of the modified apparatus was verified through the extraction of marula seed oil and compared with another supercritical fluid (SF) extractor to show 50 % extraction efficiency in each case. A review of the literature indicated that the crystal chemical requirements for substitution of trivalent (Ce+3) for tetravalent (Th+4) may be fulfilled during SFE processes. Experimental substitution extractions were conducted by addition of different chelates and were conducted by subjecting the monazite samples to 20 MPa pressure for 180 min static flow and 10 min continuous flow extraction times with a CO2 flow rate of 2 mL/min with 10 % co-solvent flow rate. The results of the two sets of substitution extractions namely α and β show no clear indication of Th extraction. The maximum theoretical efficiency obtainable under current extraction equipment limitations was calculated as 12%. The XRF analysis error margin was given by the analytical laboratory as 10 %. The literature has shown the substitution of trivalent cations for tetravalent cations in the monazite structure to be a valid reaction mechanism. The experimental results showed little or no success in extracting thorium from monazite. In order to prove the practical feasibility of thorium extraction several changes to the experimental operating conditions is required. / MIng (Mechanical Engineering), North-West University, Potchefstroom Campus, 2015

The reactivity of the [(Phen)Cr(CO)_3] intermediate with phosphines and phosphites (L) has been investigated through ligand-competition studies. This intermediate possesses virtually no ability to discriminate among L. The agreement between reactivity data for the thermal and photochemically-generated intermediates indicates that the same intermediate is produced via each process. Pulsed laser flash photolysis of (n^2-NP)M(CO)_4 (I) (M = Cr, Mo; NP = 1-diethylamino-2-diphenylphosphinoethane) in the absence and presence of P (OPr-i)_3 (L) in 1,2-dichloroethane and chlorobenzene induces unimolecular ring-opening to afford [(n^1-NP)M(CO)_4] (II), in which the bidentate ligand is coordinated through P. Reaction of this intermediate takes place through competitive ring-reclosure and attack at (II) by L to afford (I) and cis-(n^1-NP) (L)M(CO)_4.

A DISSERTATION SUBMITTED TO THE FACULTY OF MEDICINE, UNIVERSITY OF THE WITWATERSRAND, JOHANNESBURG, FR THE DEGREE OF MASTER OF SCIENCE IN MEDICINE. / The influence of iron on the outcome of various infections have been extensively reviewed. Clinical observations suggests that iron deficiency may be protective against malaria. Various researchers have shown that certain iron chelators blocked the proliferation of plasmodium falciparum in vitro and in vivo. (Abbreviation abstract) / Andrew Chakane 2018

Digitized by Kansas Correctional Industries

Os minerais essenciais participam de várias funções vitais do organismo, suas deficiências contribuem de maneira significante para a morbidade e mortalidade na infância, especialmente nos países em desenvolvimento, sendo consideradas como problema de saúde pública em todo o mundo. Minerais apresentados na forma de complexos orgânicos têm sido propostos para correção destas deficiências por apresentarem maior biodisponibilidade, quando comparados aos equivalentes sais inorgânicos. Os minerais cobre, ferro, manganês e zinco são essenciais aos organismos vivos (humano e animal), a manutenção de seus níveis de acordo com as necessidade fisiológicas contribuem para a manutenção da saúde, resultando em benefícios econômicos. No presente trabalho foi realizada a preparação e caracterização físico-química de complexos dos minerais Cobre (Cu), Ferro (Fe), Manganês (Mn) e Zinco (Zn) com hidrolisados parciais de proteína de soja. As hidrólises utilizando as enzimas Aranzime e Alcalase foram mais eficientes que as demais hidrólises enzimáticas ou ácidas, entretanto somente a Alcalase foi aprovada para a manufatura de produtos alimentares de consumo humano. A coordenação entre os metais e o hidrolisado pode ser confirmada por pelo deslocamento das bandas ?NH2, ?aCOO- e ?sCOO-. Os complexos obtidos de cobre, ferro, manganês e zinco, posuem em sua composição os respectivos percentuais de ligação: 2,21%, 1,22%, 12,38% e 10,40%. / The essential minerals participate in many vital functions in the organism, its deficiencies contribute in significant way for the morbidity and mortality in the childhood, especially in developing countries, being considered as public health problem in the whole world. Minerals presented in the form of organics complexes have been considered a good choice for these deficiencies, because it presents greater bioavailability when compared with the equivalents inorganic salts. The minerals copper, iron, manganese and zinc are essential to the organisms (human and animal), its physiological levels in accordance with the necessity contribute for the health maintence, resulting in economical benefits. In the present work it was carried through preparation and physical and chemical characterization of mineral complexes of Copper (Cu), Iron (Fe), Manganese (Mn) and Zinc (Zn) with partial hydrolysates of soy protein. The hydrolyses using the Aranzime and Alcalase enzymes had been more efficient than other enzymatic or acid hydrolyses, however only the Alcalase enzyme is approved for the manufacture of alimentary products for human consumption. Coordination between metals and the hydrolysate can be confirmed by the displacement of the ?NH2, ?aCOO- and ?sCOO- bands. The gotten copper, iron, manganese and zinc complexes, had the respective percentages of metal in its composition: 2,21%, 1,22%, 12,38% e 10,40%.

Common methods for determining mineral absorption by the body are invasive and frequently utilize radioisotopes. In experiment one. rats were given a dose of radiolabeled ferrous sulfate. Relative absorption was estimated by changes in serum iron and by appearance of the radiotracer in the serum. There were no differences in relative absorption determined by the methods, although the low overall absorptions by the iron-replete rats may have decreased the sensitivity. In experiments two and three. iron and magnesium supplements were given orally to 12 women age 19-25. Each subject received iron and magnesium supplements once each week for 5 weeks. Blood samples were taken via venous catheter every 30 minutes for 2 hours and 30 minutes following dosing, and a urine sample was taken following the collection time period. Samples were analyzed for serum iron, serum magnesium, hematocrit, ferritin, urinary magnesium, and urinary creatinine. The increase in serum iron was evaluated from both the peak increase in serum iron and from the integrated increase in serum iron over the blood collection time. The data for each supplement were compared by analysis of variance. For the iron supplements. the taste-free iron supplement increased serum iron less than either the Ferrochel or the ferrous sulfate supplements. When the iron absorption was then compared to ferritin stores (low, medium, and high), the relative absorption of Ferrochel was higher in the low ferritin range (0-15 ng/ml) than in the upper ranges (P=.00l for peak and P=.0002 for area). Relative absorption from Ferrochel iron was also higher than the other supplements for subjects with low ferritin stores. Neither serum nor urinary magnesium values differed significantly among the three compounds examined. Serum magnesium values are stable in healthy individuals, and the urinary magnesium data were not evaluated over 24 h as in typical magnesium load tests. In summary, both the ferrous sulfate and Ferrochel supplements were absorbed more efficiently than the taste-free iron supplement. The Ferrochel was also absorbed more efficiently in individuals with low iron stores, demonstrating better regulation by the body than with the other supplements examined.

No description available.

<p>Different prosthetic groups containing a trialkylstannyl- and an electrophilic group have been synthesised and labelled with the accelerator produced ⁷⁶Br (T_1/2=16 h) through oxidative bromination. The labelled prosthetic groups were conjugated to amino-containing macromolecules such as proteins and 5´-modified oligonucleotides.</p><p><i>N</i>-Succinimidyl 4-[⁷⁶Br]bromobenzoate <b>14 </b>was synthesised in 65 % radio-chemical yield and was conjugated to 5´-hexylamino-modified phosphodiester and phosphorothioate oligonucleotides in 12-19 % isolated radiochemical yield. The stability of the ⁷⁶Br-oligonucleotide-conjugates <i>in vivo</i> in rats was investigated. No degradation from the 5´-end, resulting in labelled, low molecular weight compounds was detected. Compound <b>14</b> has also been used for labelling of different proteins in 23-61% radiochemical yield.</p><p><i>N</i>-Succinimidyl-5-[⁷⁶Br]bromo-3-pyridinecarboxylate <b>17</b> and methyl-4-[⁷⁶Br]bromo-benzimidate <b>15 </b>were synthesised from the corresponding trimethylstannyl-compound in 25% and 40 % yield respectively. Compounds <b>14 </b>and <b>17</b> were conjugated to ε-Boc-octreotide in 55 and 50% isolated radiochemical yield respectively after microwave heating. Compound <b>15</b> did not react with octreotide under the conditions investigated. The two ⁷⁶Br-labelled octreotide derivatives showed different lipophilicity and different binding-properties to tissue from meningiomas.</p><p>Hyaluronic acid, a polysaccharide, was modified with tyramine and labelled by oxidative bromination using ⁷⁶Br in 10% radiochemical yield.</p><p>The generator produced ⁶⁸Ga (T_1/2=68 min) was used to label octreotide and oligonucleotides modified with the metal chelating group 1,4,7,10-tetraazacyclo-dodecane-1,4,7,10-tetraacetic acid (DOTA). ⁶⁸Ga-DOTA-octreotide was isolated in 65% radiochemical yield and a phosphorothioated ⁶⁸Ga-DOTA-oligonucleotide was isolated in 35% radio-chemical yield after 30 min synthesis time.</p><p>Compound<b> 14 </b>was reacted with 3-aminomethylbenzylamine to give compound <b>18</b>. The specific radioactivity<b> </b>of<b> 18 </b>was determined to be 36 GBq/µmol by measuring the ratio between the mass-peaks for the ⁷⁶Br and ⁷⁹Br-compounds using packed-capillary LC-MS.</p>

Different prosthetic groups containing a trialkylstannyl- and an electrophilic group have been synthesised and labelled with the accelerator produced 76Br (T1/2=16 h) through oxidative bromination. The labelled prosthetic groups were conjugated to amino-containing macromolecules such as proteins and 5´-modified oligonucleotides. N-Succinimidyl 4-[76Br]bromobenzoate <b>14 </b>was synthesised in 65 % radio-chemical yield and was conjugated to 5´-hexylamino-modified phosphodiester and phosphorothioate oligonucleotides in 12-19 % isolated radiochemical yield. The stability of the 76Br-oligonucleotide-conjugates in vivo in rats was investigated. No degradation from the 5´-end, resulting in labelled, low molecular weight compounds was detected. Compound <b>14</b> has also been used for labelling of different proteins in 23-61% radiochemical yield. N-Succinimidyl-5-[76Br]bromo-3-pyridinecarboxylate <b>17</b> and methyl-4-[76Br]bromo-benzimidate <b>15 </b>were synthesised from the corresponding trimethylstannyl-compound in 25% and 40 % yield respectively. Compounds <b>14 </b>and <b>17</b> were conjugated to ε-Boc-octreotide in 55 and 50% isolated radiochemical yield respectively after microwave heating. Compound <b>15</b> did not react with octreotide under the conditions investigated. The two 76Br-labelled octreotide derivatives showed different lipophilicity and different binding-properties to tissue from meningiomas. Hyaluronic acid, a polysaccharide, was modified with tyramine and labelled by oxidative bromination using 76Br in 10% radiochemical yield. The generator produced 68Ga (T1/2=68 min) was used to label octreotide and oligonucleotides modified with the metal chelating group 1,4,7,10-tetraazacyclo-dodecane-1,4,7,10-tetraacetic acid (DOTA). 68Ga-DOTA-octreotide was isolated in 65% radiochemical yield and a phosphorothioated 68Ga-DOTA-oligonucleotide was isolated in 35% radio-chemical yield after 30 min synthesis time. Compound<b> 14 </b>was reacted with 3-aminomethylbenzylamine to give compound <b>18</b>. The specific radioactivity<b> </b>of<b> 18 </b>was determined to be 36 GBq/µmol by measuring the ratio between the mass-peaks for the 76Br and 79Br-compounds using packed-capillary LC-MS.