Yes

Ion-selective polymeric optical sensors – ion optodes – are a promising alternative to ion-selective electrodes and fluorescent dyes for analytical and biological applications, e.g. extra- and intracellular measurements. They are non-toxic, highly selective robust probes for ionic fluxes monitoring. A large-scale fabrication of ion optodes using a solvent displacement method is introduced. This method is a single-batch process that does not require any additional steps. The influence of numerous parameters, e.g. surfactant concentration, solvent nature and membrane concentration, on the average size of the synthesized optodes was studied. The solvent displacement method allows control of the particle size in 200 nm to 30 μm range. Ion optodes selective for sodium, potassium, and calcium cations were prepared and calibrated for hydrogen (pH), sodium, potassium, and calcium. Fabricated sensors demonstrated excellent selectivity, low drift, high stability and reproducibility. Further studies of ion-optodes of different sizes but the same chemical composition revealed a significant shift in their response function. This bias is clearly seen for all fabricated optodes. A strong correlation between a calculated specific surface area and the apparent ion-exchange constant was observed. Considering this, it may be hypothesized that the surface phenomena are contributing to the overall optode response resulting in the observed effect. As a consequence, the response models, developed for the macroscopic ion optodes, cannot be easily applied to the probes at micron- and nano-scale. A primary concern for continuous sensing application of optical sensors is photobleaching of lipophilic fluorescent dye which prevents quantitative fluorescence measurements. Quantum dots, known for their high photostability, brightness and broad excitation spectra with narrow emission bands, were incorporated into polymeric matrix. They excited a fluorophore indirectly, thus, reducing its photobleaching and increasing sensors life-time. We created a composite, quantum dots doped, polymeric sensor that can be integrated into high-throughput detection platforms, such as flow cytometry, chip-based micro-total analysis system technologies, or bundled optical fiber arrays. Ultimately, a fabricated ion-optode was introduced into a Boolean logic gate serving as a reporting microparticle. It responded to the pH changes generated in situ by the enzyme logic system. The present work aimed scaling down the size of biocomputing functional units which might reach the information processing by single molecules associated with signal-transducing single nanoparticles. / Graduation date: 2012

Le développement des nanoparticules fluorescentes, appelées quantum dots (QDs) est devenu l'un des domaines les plus prometteurs de la science des matériaux. Dans cette étude une procédure de synthèse de QDs a été mise au point, comprenant la synthèse de noyaux ultra-minces de CdSe, la purification de noyau haute performance, le revêtement central avec une coquille épitaxiale en ZnS. Cette approche a permis d’obtenir des QDs d’une taille de 3,7 nm possédant un rendement quantique supérieur à 70%. Les QDs développés ont été utilisés pour concevoir des conjugués de QDs compacts avec les nouveaux dérivés d'acridine, ayant une affinité élevée pour le G-quadruplex des télomères, ainsi que leur effet inhibiteur sur la télomérase, une cible importante du traitement du cancer. Les résultats de cette étude ouvrent la voie à l'ingénierie de nanosondes multifonctionnelles possédant une meilleure pénétration intracellulaire, une plus forte brillance et une stabilité colloïdale plus importante. / Development of the fluorescent nanoparticles referred to as quantum dots (QDs) has become one of the most promising areas of materials sciences. In this study, a procedure of synthesis of QDs, which includes the synthesis of ultrasmall CdSe cores, high-performance purification, core coating with an epitaxial ZnS shell has been developed. This approach has allowed obtaining 3.7-nm QDs with a quantum yield exceeding 70%. The QDs have been used: to engineer compact conjugates of QDs with the novel acridine derivatives, which have a high affinity for the telomere G-quadruplex; to demonstrate their inhibitory effect on telomerase, an important target of anticancer therapy; and to accelerate transmembrane penetration of ultrasmall QDs into cancer cells while retaining a high brightness and colloidal stability. The results of this study pave the way to the engineering of multifunctional nanoprobes with improved intracellular penetration, brightness, and colloidal stability.

Para o desenvolvimento dos sensores aqui descritos foram utilizados materiais inovadores considerando relatos atuais da literatura, materiais estes: óxido de grafeno, óxido de grafeno reduzido, nanocompósitos de grafeno e nanopartículas (ródio, antimônio e sílica mesoporosa desordenada), materiais híbridos a base de grafeno e quantum dots de CdTe, além de biossensores incorporando a enzima lacase. Estes materiais foram sintetizados utilizando metodologias específicas e caracterizados por diversas técnicas analíticas como microscopia eletrônica de transmissão de alta resolução, microscopia de força atômica, espectroscopia Raman, difração de raios-X, espectroscopias de UV-Vis e fotoluminescência, e técnicas eletroquímicas. Posteriormente, os materiais foram utilizados para modificação em eletrodos de carbono vítreo e utilizados na determinação de interferentes endócrinos (os hormônios estriol e 17β-estradiol) como sensores eletroquímicos em amostras ambientais e clínicas. Em essência, os eletrodos desenvolvidos apresentaram importantes vantagens, tais como alta sensibilidade, boa reprodutibilidade, simples instrumentação, fácil preparação e procedimentos analíticos rápidos, apresentando baixos limites de detecção, na ordem de picomolar e nanomolar, com baixa taxa de interferência de outras espécies na mesma matriz da amostra. Concluindo assim que as técnicas eletroquímicas podem ser facilmente aplicadas na determinação de interferentes endócrinos em amostras reais. / For the development of the sensors described here innovators materials were used considering current literature reports, these materials: Graphene oxide, reduced graphene oxide, nanocomposites graphene and nanoparticles (rhodium and antimony), hybrid materials of graphene and CdTe quantum dots, and biosensors incorporating the laccase enzyme. These materials were synthesized using specific methodologies and characterized by several analytical techniques such as transmission electron microscopy, high resolution transmission electron microscopy, atomic force microscopy, Raman spectroscopy, X-ray diffraction, UV-Vis and photoluminescence spectroscopy and electrochemical techniques. Subsequently, the materials were used for modification of glassy carbon electrodes to the determination of endocrine disruptors (estriol and 17β-estradiol hormone) as electrochemical sensors for environmental and clinical samples. In essence, developed electrodes showed important advantages such as high sensitivity, good reproducibility, simple instrumentation, easy preparation and quick analytical procedures, with low detection limits in the range of picomolar and nanomolar, low interference rate of other species in same matrix sample. Finally, electrochemical techniques can be easily applied in the determination of endocrine disruptors in real samples.

O objetivo deste estudo epidemiológico e retrospectivo foi analisar o Programa de Prevenção e Controle da Tuberculose na jurisdição sanitária de Tlalnepantla, México 2000-2002). A partir de uma revisão de fontes secundárias (prontuários médicos), os dados foram coletados por meio de um formulário e complementados com os dados obtidos através de entrevistas com trabalhadores de saúde que atuam no programa. A informação foi processada e analisada utilizando os programas Epi-Info versão 6.0, SPSS versão 10.0, Microsoft Word e o Microsoft Excel para tabulação e apresentação dos dados. As variáveis foram: qualidade da informação, dados sóciodemográficos, aspectos relacionados ao diagnóstico, tratamento, referência de casos, relação entre a notificação dos casos e a existência de um laboratório nos serviços de saúde, relação entre a distância das unidades e a Direção Sanitária da jurisdição, relação entre os casos notificados e a incidência esperada e observada dos casos de TB no período de estudo. Os principais resultados foram: qualidade dos registros: ótima 23%, boa 34%, regular 4% e deficiente 39%. Foram encontrados 75 casos notificados no período, 95% dos quais encontravam-se acima de 15 anos; houve uma relação 1:1 homem-mulher, com predomínio do estado civil “casado". Observou-se baixa escolaridade em 50% dos casos. 5 das 18 unidades detectaram 57% dos casos. Foi diagnosticado Tuberculose Pulmonar em 65% dos casos e Extrapulmonar em 35%. Constatou-se a associação estatística entre a existência de laboratório nas unidades e o número de casos notificados em cada uma delas (p=0.003). Do total de casos, 60% foram detectados nos níveis secundário e terciário de assistência; 46% foram diagnosticados por baciloscopia; 61% iniciaram tratamento posterior ao diagnóstico dentro do período de um dia até um ano; 60% não tinham registro sobre a data de alta do programa; 50% não tinham data de término do tratamento e 77% foram registrados como tratamento supervisionado. Os 75 casos encontrados corresponderam a apenas 24%do total estimado para o tamanho da população. Conclui-se que os prontuários médicos têm uma importante margem de erro e não acompanham as normas vigentes. Não existe participação da população atendida no PPCT e, conseqüentemente, os princípios da Atenção Primária à Saúde não são cumpridos. Existe pouca busca e detecção dos casos em nível de assistência primária. Apesar dos esforços realizados, estas atividades continuam sendo centralizados em nível de atenção terciária. / This epidemiological and retrospective study aimed to analyze the Tuberculosis Prevention and Control Program in the health jurisdiction of Tlalnepantla, Mexico (2000-2002). Starting from a review of secondary sources (medical files), data were collected by means of a form and complemented with the data obtained through interviews with health workers who work in the program. The information was processed and analyzed using Epi-info version 6.0 program, SPSS version 10.0, Microsoft Word and Microsoft Excel for data tabulation and presentation. The variables were: information quality, sociodemographic data, diagnosis-related aspects, treatment, reference of cases, relationship between notification of cases and existence of laboratories at the health service, relation between distance from the units to the Health Direction of the jurisdiction, relation between the notified cases and the prospective and observed incidence of TB cases in the study period. The main results were: the quality of registration was: very good (23%), good (34%), regular (4%) and faulty (39%). 75 notified cases were found in the period, 95% of which were over 15 years old; there was a 1:1 relationship between men and women; the most frequent civil status was “married". Low educational levels were observed in 50% of the cases. Five of the eighteen units detected 57% of the cases. Pulmonary Tuberculosis was responsible for 65% and Extrapulmonary Tuberculosis for 35% of the notified cases. A statistical association was found between the existence of lab units and the number of notified cases in each of them (p=0.003). 60% of all cases were detected at the secondary and tertiary care levels; 46% were detected through bacilloscopy; 61% started treatment after one day up to one year; no records of the data of discharge from the program were found in 60%; 50% did not mention the end date of the treatment and 77% were registered as supervised treatment. The 75 detected cases corresponded to a mere 24% of the total number of cases estimated in accordance with the population size. It was concluded that the medical files contain an important margin of error and do not attend to official standards. The population attended at the PPCT does not participate and, consequently, the principles of Primary Health Care are not complied with. Little TB case search and detection occurs at the primary care level. In spite of these efforts, these activities are still centralized at the tertiary care level.

<p>This thesis addresses electron spin phenomena in semi-conductor quantum dots/anti-dots from a computational perspective. In the first paper (paper I) we have studied spin-dependent transport through open quantum dots, i.e., dots strongly coupled to their leads, within the Hubbard model. Results in this model were found consistent with experimental data and suggest that spin-degeneracy is lifted inside the dot – even at zero magnetic field.</p><p>Similar systems were also studied with electron-electron effects incorporated via Density Functional Theory (DFT) in paper III. Within DFT we found a significant spin-polarisation in the dot at low electron densities. As the electron density increases the spin polarisation in the dot gradually diminishes. These findings are consistent with available experimental observations. Notably, the polarisation is qualitatively different from the one found in the Hubbard model – this indicates that the simplified approach to electronelectron interaction in the Hubbard model might not always be reliable.</p><p>In paper II we propose a spin-filter device based on resonant backscattering of edge states against a quantum anti-dot embedded in a quantum wire. A magnetic field is applied and the spin up/spin down states are separated through Zeeman splitting. Their respective resonant states may be tuned so that the device can be used to filter either spin in a controlled way.</p> / Report code: LIU-Tek-Lic 2005:65

<p>Tuberkulos (tbc) är en luftburen droppsmitta orsakad av mykobakterium tuberkulosis. Tbc är den sjukdom som efter AIDS orsakar flest dödsfall, trots att botande behandling finns. Behandlingen är krävande för den tbc-smittade att genomgå och bygger på en kombination av en rad antibiotika som måste intas under minst sex månader. Ett avvikande i behandlingen kan resultera i att mykobakterium tuberkulosis blir resistent mot de ordinerade antibiotika. Följsamhet av långtidsbehandlingar som tbc-behandling graderas till 50 %. Syftet med litteraturstudien var att ur ett globalt perspektiv beskriva hur sjuksköterskan kan påverka följsamhet vid tbc-behandling i syfte att minska resistensutvecklingen av mykobakterium tuberkulosis. Studien genomfördes som en litteraturstudie där 12 vetenskapliga artiklar granskades och analyserades. Resultatet visar tydligt att specifika faktorer påverkar följsamhet och därigenom resistensutvecklingen. Faktorerna innefattar patientundervisning, behandlingsstrategier, omgivningens påverkan och stöd.  Undervisningen resulterar i att patienten får ökad förståelse för behandlingen. För att minska stigmatiseringen och det lidande den innebär för den tbc-smittade är även omgivningen i behov av ökad kunskap och information om tbc. Ett flertal studier visar att DOTS-strategin är betydelsefull för ökad följsamhet vid antituberkulos behandling. Litteraturstudien medför ett förslag om att sjuksköterskeprogrammet ska öka fokuseringen på följsamhet vid läkemedelsanvändning. Sjuksköterskan är i behov av att redan under grundutbildningen få kunskap om ansvarsfull antibiotikahantering som leder till en följsamhetsomtanke.</p> / <p>Tuberculosis (TB) is an airborne droplet infection caused by mycobacterium tuberculosis. TB is the disease after AIDS that is most deadly, even though curative treatment exists. The treatment is demanding for the TB-infected to undergo and consists of a combination of a number of antibiotics that must be administered for at least six months. A dissenting in anti-tuberculosis treatment might result in mycobacterium tuberculosis strains that are resistant to antibiotics. As adherence to long-term treatment is graded at a low percentage (50 %) the aim of the literature study was from a global perspective to develop a working-strategy for nurses that promote compliance in TB-treatment in order to reduce resistance development of mycobacterium tuberculosis. The study was conducted as a literature study where 12 research articles were reviewed and analyzed. The results describe specific factors that are essential to compliance. These factors comprise patient education, treatment strategies, social influences and support. As knowledge gives the patient a better understanding for the treatment it provokes compliance. The social environment of the TB-infected patient demands increased knowledge in order to reduce stigma. Several studies show that the DOTS strategy is important for increasing compliance in anti-tuberculosis treatment. The literature study results in a proposal for the nursing program to focus more on compliance in taking medication. The nursing program’s attendants need to gain knowledge about prudent antibiotic treatment that leads to a compliance concern.</p>

Near-field optical microscopy has attracted remarkable attention, as it is the only technique that allows the investigation of local optical properties with a resolution far below the diffraction limit. Especially, the scattering-type near-field optical microscopy allows the nondestructive examination of surfaces without restrictions to the applicable wavelengths. However, its usability is limited by the availability of appropriate light sources. In the context of this work, this limit was overcome by the development of a scattering-type near-field microscope that uses a widely tunable free-electron laser as primary light source. In the theoretical part, it is shown that an optical near-field contrast can be expected when materials with different dielectric functions are combined. It is derived that these differences yield different scattering cross-sections for the coupled system of the probe and the sample. Those cross-sections define the strength of the near-field signal that can be measured for different materials. Hence, an optical contrast can be expected, when different scattering cross-sections are probed. This principle also applies to vertically stacked or even buried materials, as shown in this thesis experimentally for two sample systems. In the first example, the different dielectric functions were obtained by locally changing the carrier concentration in silicon by the implantation of boron. It is shown that the concentration of free charge-carriers can be deduced from the near-field contrast between implanted and pure silicon. For this purpose, two different experimental approaches were used, a non-interferometric one by using variable wavelengths and an interferometric one with a fixed wavelength. As those techniques yield complementary information, they can be used to quantitatively determine the effective carrier concentration. Both approaches yield consistent results for the carrier concentration, which excellently agrees with predictions from literature. While the structures of the first system were in the micrometer regime, the capability to probe buried nanostructures is demonstrated at a sample of indium arsenide quantum dots. Those dots are covered by a thick layer of gallium arsenide. For the first time ever, it is shown experimentally that transitions between electron states in single quantum dots can be investigated by near-field microscopy. By monitoring the near-field response of these quantum dots while scanning the wavelength of the incident light beam, it was possible to obtain characteristic near-field signatures of single dots. Near-field contrasts up to 30 % could be measured for resonant excitation of electrons in the conduction band of the indium arsenide dots.

This research focuses on generating, isolating, and characterizing nanophase gold clusters with diameters below two nanometers. In this size regime, the metal cores exhibit electronic and optical properties very different from those of colloidal and bulk gold, arising from quantum size confinement. The unoccupied molecular orbitals of the cores are known to accept electrons, analogous to a capacitor, but with discrete electrochemical potentials. This work describes the novel production of gold clusters with structurally rigid benzenethiolate bound to the surface, rather than typically used alkanethiolates. The Aux(benzenethiolate)y clusters are anionic and charged balanced by tetraoctylammonium cations. They are enriched in ~1.5 nm diameter cores, compared to a dominance of 1.7 nm cores when alkanethiols are used during synthesis. The Aux(benzenethiolate)y clusters are more likely to form bulk crystals and possess enhanced electrochemistry relative to Aux(alkylthiolate)y clusters. They are characterized by x-ray diffraction, carbon and proton NMR, FTIR, optical spectroscopy, mass spectrometry, elemental analysis, and thermogravimetric analysis. The etching of clusters in the presence of hydrogen peroxide and excess benzenethiol to yield smaller 1.1 nm clusters is reported for the first time in this work. These 1.1 nm clusters have a rich optical spectrum with clear electronic transitions at room temperature and orient spontaneously when deposited from solution. This oxidative etching process was applied to alkanethiolate clusters, converting ~2.0 nm polydisperse clusters into smaller clusters. This offers the potential to produce smaller gold clusters with more available charge states and may allow increase the types of thiols that can be bound to the surface of gold monolayer protected clusters (MPCs), known also as quantum dots. The use of the bulky thiol, tert-butylmercaptan to produce 1.5 nm core gold clusters is also reported, indicating sterically hindered alkanethiols can play a role in limiting the size of Aux(alkylthiolate)y clusters. These clusters were characterized by x-ray diffraction, proton NMR, FTIR, optical spectroscopy, and mass spectrometry. The clusters are potentially useful for thiolate exchange reactions to produce new types of Aux(thiolate)y clusters.

Despite significant developments in imaging modalities and therapeutics, cancer mortality rates remain unchanged. Detecting cancer before it has spread to other organs improves patient outcome dramatically. Therefore, greater emphasis must be placed on developing novel technology for early cancer detection and disease monitoring. Nanometer-sized materials have unique optoelectronic and magnetic properties. In particular, semiconductor quantum dots (QD) are a new class of fluorophores that are bright, photostable, and can be simultaneously excited to emit different wavelengths of light. Magnetic iron oxide nanoparticles are another class of unique nanomaterials that exhibit superparamagnetism and are strongly magnetized only in the presence of a magnetic field. In this dissertation, we describe the integration of semiconductor QDs and magnetic iron oxide nanoparticles and potential applications for (i) early detection of cancer biomarkers through routine screening, and (ii) disease monitoring through the capture and analysis of rare circulating tumor cells. First, we describe the development of integrated magneto-optical beads that can be optically encoded and magnetically separable for isolating low amounts of biomolecules from solution. Second, we demonstrate improved detection sensitivity by combining immunomagnetic beads and highly luminescent nanoparticles in a sandwich assay. Next, we describe integration of magnetic and QD nanotechnology for the selective capture and molecular profiling of rare cells. We demonstrate the ability to spectroscopically determine relative molecular levels of markers to identify invasive cells. As disease monitoring requires the analysis of patient blood samples, we have also studied nanoparticle-cell interactions using QDs to determine nanoparticle behavior in whole blood as a function of surface coatings. We observed that anionic nanoparticles with carboxylic acid groups (-COOH) were strongly associated with leukocytes, but interestingly this association was cell specific. Hydroxyl-modified QDs (QD-OH) suppressed binding and uptake by leukocytes as efficiently as PEG-modified QDs. The integration of nanotechnologies represents a new and exciting approach that has the potential to push the limits of detection sensitivity and permit isolation and profiling of multiple biomarkers from large sample volumes.