Les travaux développés durant cette thèse concernent la détection et l'identification des défauts simples et multiples d'ouverture des transistors dans un convertisseur statique associé à une machine asynchrone. Pour aborder cette problématique, nous avons commencé par l'analyse des potentialités, des faiblesses et des incertitudes des techniques qui ont initiés notre démarche. Ensuite, nous avons présenté deux méthodologies permettant d'analyser les performances du moteur asynchrone en présence des défauts dans une ou plusieurs cellules de commutation. Cette étude préliminaire nous a permis ainsi de proposer deux nouvelles stratégies de diagnostic sans référence basées sur l'approche signal. Les signaux électriques (courants ou tensions) disponibles à la sortie du convertisseur statique sont utilisés pour alimenter le processus de diagnostic. La première stratégie retenue est basée sur l'analyse qualitative des tensions de sortie entre phases du convertisseur et des signaux de commande appliqués aux transistors pendant les instants de commutation. Grâce à une représentation instantanée de ces grandeurs, à l'échelle de la période de découpage, nous avons pu mettre en évidence des caractéristiques favorables à la détection des défauts simples et multiples d'ouverture des transistors. L'implémentation pratique de cette première approche a été réalisée au moyen d'une technologie analogique permettant ainsi de minimiser le temps de retard à la détection jusqu'à quelques dizaines de microsecondes. / The main goal of this thesis concerns the detection and identification of simple and multiple open-circuit faults in voltage source inverters (VSIs)-fed induction motor drives. In first step, the potentialities, the weaknesses as well as the uncertainties of the previously published works have been discussed. The second step was dedicated to the study of the inverter faults impact on the induction motor. For this purpose, we have proposed two methodologies permitting the characterization of the electromagnetic torque behaviour as well as the electric variables of the induction motor under the open- and short-circuit faults. These preliminary studies allowed to propose two novel signal-based approaches for open-circuit fault diagnosis in voltage source inverter. The measured outputs inverter voltages and currents have been used as the input quantities for the fault detection and identification (FDI) process. The first approach consists in analyzing the pulse-width modulation (PWM) switching signals and the line-to-line voltage levels during the switching times, under both healthy and faulty operating conditions. For this purpose, we have adopted an instantaneous representation of these variables, which permits their analysis over one switching period. The fault diagnosis scheme is achieved using simple analog device. This circuit allows an accurate single and multiple faults diagnosis, and a minimization of the fault detection time which becomes about a few tens of microseconds.

Migration, exil, déportation, transplantation, exode, expatriation, autant de mots pour qualifier le départ d’un pays. Autant les sciences sociales se sont attachées à comprendre la migration sous toutes ses formes depuis longtemps, autant la psychologie « de la migration » n’en est qu’à ses débuts. Elle s’est, pour l’heure, surtout intéressée aux difficultés rencontrées par les immigrés, mais peu à l’émigré.Il est donc question dans ce travail de tenter de mettre à jour les processus psychiques, et dynamiques préalables au départ. Pour ce faire, j’ai choisi de me mettre également en situation de migration pendant le travail de la recherche, pour rencontrer, accompagner et prendre en charge des candidats aux départs, et des migrants en situation de transit. S’est révélé, au cours de ce travail, la complexité due aux emboitements des différents espaces de réalités auxquelles chaque sujet a à faire. Malgré tout, il est possible de dire que les processus migratoires se mettent en place à partir de contextes tyranniques (familiaux, sociaux) au sein desquels l'emprise et la violence sont au cœur du lien. Le prétexte économique, souvent mis au premier plan, vient symboliser la dualité dette / réparation de la dette, et semble consécutif au fantasme de meurtre qui agite le groupe familial. La migration manifeste une forme de libido d'expression épistémophilique. Elle est la mise en acte d'une quête de sens sur la jouissance de l'autre, parent, de la violence qu'il a agie en tyrannisant le groupe. La migration est métaphore, mais elle est aussi symptôme ; elle est à la fois tentative de mise en conflit par le déplacement de l’originaire aliénant, et répétition par retournement de mécanismes de rejet, d’exclusion. / Migration, exile, deportation, transplantation, exodus, expatriation are as many words to describe leaving a country. Though for a long time, social sciences have been attempting to understand all forms of migration, migration psychology is starting out. Up to now, it was interested in studying the immigrant's difficulties more than the emigrant.This study tries to update the psychic and dynamic process preliminary to departure. This is why I deliberately became a migrant during the whole research: I encountered, accompanied and took in charge prospective and transit migrants.My work enlightened on the complexity due to the diverse and intricate spaces of realities each subject has to deal with.However, migratory processes can be described as induced by oppressive contexts (in family or society) where control and violence are at the core of the bond. Economic motives are often put forward: they symbolize the duality of debt and reparation, and seem to be resulting from the murder fantasy in the family group.Migration denotes a form of libido and of epistemophilic drive. It is the actuation of a quest for the meaning of the other's (the parent's) narcissistic pleasure; it questions the violence and the control the other exerts over the group.Migration is both a metaphor and a symptom; it is the attempt to challenge and to modify the original alienation, as well as a repetition and a reversal of mechanisms of rejection and exclusion.

O presente trabalho apresenta uma transformação dq não senoidal e sua aplicação em máquinas síncronas com ímã permanente na superfície do rotor (MSIP) e forma de onda de FEM não senoidal. O modelo resultante da aplicação dessa transformação permite o controle direto do torque eletromagnético, permitindo reduzir as ondulações do torque produzido nesse tipo de máquina. A redução dessas ondulações em MSIPs não senoidais possibilita que esse tipo de máquina seja empregado em aplicações onde somente MSIPs senoidais, que possuem custo mais elevado, poderiam ser usadas. Simulações e resultados práticos, obtidos pela implementação do sistema de controle vetorial não senoidal desenvolvido, são apresentados no trabalho. Pelos resultados obtidos, pode-se verificar que o método proposto é eficaz na redução das ondulações do torque eletromagnético em MSIPs não senoidais. / This work presents a non-sinusoidal dq transformation and its application in permanent- magnet synchronous machines (PMSM) with a non-sinusoidal back-EMF waveform. The resulting model of the application of such transformation permits direct control of machine electromagnetic torque, which achieves the reduction of torque ripple. The reduction of torque ripple in non-sinusoidal PMSMs makes possible the use of this kind of PMSM instead of sinusoidal PMSMs, which are more expensive. Simulation and practical results, obtained by the implementation of such non-sinusoidal vectorial control system, are shown in this work. Those results show that the method presented is efficacious in the torque ripple reduction in non-sinusoidal PM synchronous machines.

O objetivo desse trabalho é o estudo e a análise do desempenho de máquinas brushless com ímã permanente no rotor, com fluxo de entreferro não senoidal. São consideradas máquinas brushless com ímã permanente na superfície do rotor. Três modelos matemáticos são considerados: o modelo por fase de estator, o modelo vetorial e o modelo velocidade-tensão de segunda ordem. Máquinas com diferentes tipos de enrolamento de estator são comparadas, incluindo as máquinas síncronas com ímã permanente no rotor (com a densidade dos enrolamentos distribuída de forma senoidal no estator). Os resultados para o torque eletromagnético das máquinas foram obtidos considerando-se dois tipos de acionamentos em malha aberta: um acionamento de seis pulsos e um acionamento senoidal. Por fim, um método de controle é apresentado para máquinas não senoidais. As ondulações no torque e o desempenho das máquinas não senoidais. As ondulações no torque e o desempenho das máquinas não senoidais, utilizando controle vetorial, são comparados aos das máquinas senoidais. / The aim of this work is to analyse the torque performance of brushless machines with non-sinusoidal distributed magnetic fluxes. The machine type considered is a surface mount permanent magnet brushless machine. Three mathematical models for the machine are considered: the per stator phase, the vectorial and the linear second order speed-voltage models. Machines with different stator windings are compared including the permanent magnet synchronous machines with sinusoidal distributed stator windings. The torque outputs of these machines are obtained considering two kinds of open loop driving systems: one with a six-pulse waveform and other with a sinusoidal waveform. Finally, a vectorial control is proposed for the non-sinusoidal machines. The torque ripple as well the overall performance of non-sinusoidal machines with vectorial control is compared to that of sinusoidal machines.

Considerando-se o atual estagio de desenvolvimento das máquinas elétricas, tanto em termos de ferramentas computacionais auxiliares nas simulações e nos projetos, quanto de materiais e sistemas eletrônicos de acionamento e controle, propõe neste trabalho a construção de um dispositivo eletromecânico, na classe dos motores elétricos lineares, que atenda as necessidades e se aplique a bioengenharia, mais propriamente as próteses de membro superior, na forma de acionador translacional. Este dispositivo deve substituir os sistemas que utilizam motores elétricos rotativos com mecanismos de adaptação mecânica (roldanas, vários fios, redutores), que convertem o movimento rotacional em linear. Também, os dispositivos híbridos, como atuadores eletro-hidráulicos e eletropneumáticos, que necessitam de fontes de energia de naturezas diferentes da eletroeletrônica, podem ser substituídos pelas maquinas elétricas lineares. Uma revisão dos conceitos relacionados a área de bioengenharia e feita, destacando-se os mecanismos de transmissão existentes. E apresentada uma analise comparativa entre os principais motores lineares, enfatizando-se as características construtivas, as vantagens e as desvantagens de cada um, relacionados a aplicação. A escolha da maquina a ser projetada e construída recaiu no motor linear síncrono, com imas permanentes na superfície da parte móvel, em uma estrutura tubular. Para esta maquina, e exposta uma metodologia de projeto, baseando-se nos seguintes tópicos: equacionamento do circuito magnético, cálculos de parâmetros utilizando-se o método dos elementos finitos e modelagem matemática por meio das equações por fase. Apos a etapa teórica, a construção da maquina e apresentada juntamente com os ensaios experimentais, possibilitando a comparação das características reais em relação ao projeto inicial. Por fim, o motor e aplicado ao dedo artificial, verificando-se a sua capacidade de substituição do motor rotativo. / By means of the latest technological advances of the electrical machines, both in terms of computational aids in simulations and designs, materials and electronic systems of drive and control, this work put forward the construction of an electromechanical device, in the class of the linear motors. It will be applied to bioengineering area, in particular in upper limb prostheses, in the form of a translational actuator. This linear motor must substitute the systems that use electric rotational motors with planetary gears and lead screw transmission, to convert the rotational movement into linear. The hybrid mechanisms, like electro pneumatic/hydraulic actuators, which need energy sources different from electronics, can be changed for the linear electric machines too. A review about bioengineering topics is done, where the existent mechanical mechanisms are highlighted. According to the application necessities, the advantages and disadvantages of different topologies of electric linear machines are compared and the constructive characteristics are emphasized. The tubular linear synchronous motor, with permanent magnets on the surface of the mobile part, was chosen to be applied to hand prostheses. To this machine, a design methodology is presented for calculating the motor dimensions, based on the following subjects: magnetic circuit equating, finite element analyses to evaluate parameters and machine dynamic modeling. After the theorethical stage, the construction of the machine is presented with the experimental results, allowing comparisons between the real characteristics and the initial design features of the motor. Finally, the machine is applied to an artificial finger to verify its capability to replace the rotational motor.

Considerando-se o atual estagio de desenvolvimento das máquinas elétricas, tanto em termos de ferramentas computacionais auxiliares nas simulações e nos projetos, quanto de materiais e sistemas eletrônicos de acionamento e controle, propõe neste trabalho a construção de um dispositivo eletromecânico, na classe dos motores elétricos lineares, que atenda as necessidades e se aplique a bioengenharia, mais propriamente as próteses de membro superior, na forma de acionador translacional. Este dispositivo deve substituir os sistemas que utilizam motores elétricos rotativos com mecanismos de adaptação mecânica (roldanas, vários fios, redutores), que convertem o movimento rotacional em linear. Também, os dispositivos híbridos, como atuadores eletro-hidráulicos e eletropneumáticos, que necessitam de fontes de energia de naturezas diferentes da eletroeletrônica, podem ser substituídos pelas maquinas elétricas lineares. Uma revisão dos conceitos relacionados a área de bioengenharia e feita, destacando-se os mecanismos de transmissão existentes. E apresentada uma analise comparativa entre os principais motores lineares, enfatizando-se as características construtivas, as vantagens e as desvantagens de cada um, relacionados a aplicação. A escolha da maquina a ser projetada e construída recaiu no motor linear síncrono, com imas permanentes na superfície da parte móvel, em uma estrutura tubular. Para esta maquina, e exposta uma metodologia de projeto, baseando-se nos seguintes tópicos: equacionamento do circuito magnético, cálculos de parâmetros utilizando-se o método dos elementos finitos e modelagem matemática por meio das equações por fase. Apos a etapa teórica, a construção da maquina e apresentada juntamente com os ensaios experimentais, possibilitando a comparação das características reais em relação ao projeto inicial. Por fim, o motor e aplicado ao dedo artificial, verificando-se a sua capacidade de substituição do motor rotativo. / By means of the latest technological advances of the electrical machines, both in terms of computational aids in simulations and designs, materials and electronic systems of drive and control, this work put forward the construction of an electromechanical device, in the class of the linear motors. It will be applied to bioengineering area, in particular in upper limb prostheses, in the form of a translational actuator. This linear motor must substitute the systems that use electric rotational motors with planetary gears and lead screw transmission, to convert the rotational movement into linear. The hybrid mechanisms, like electro pneumatic/hydraulic actuators, which need energy sources different from electronics, can be changed for the linear electric machines too. A review about bioengineering topics is done, where the existent mechanical mechanisms are highlighted. According to the application necessities, the advantages and disadvantages of different topologies of electric linear machines are compared and the constructive characteristics are emphasized. The tubular linear synchronous motor, with permanent magnets on the surface of the mobile part, was chosen to be applied to hand prostheses. To this machine, a design methodology is presented for calculating the motor dimensions, based on the following subjects: magnetic circuit equating, finite element analyses to evaluate parameters and machine dynamic modeling. After the theorethical stage, the construction of the machine is presented with the experimental results, allowing comparisons between the real characteristics and the initial design features of the motor. Finally, the machine is applied to an artificial finger to verify its capability to replace the rotational motor.

Energy efficiency and renewable energy use are two main priorities leading to industrial sustainability nowadays according to European Steel Technology Platform (ESTP). Modernization efforts can be done by industries to improve energy consumptions of the production lines. These days, steel making industrial applications are energy and emission intensive. It was estimated that over the past years, energy consumption and corresponding CO2 generation has increased steadily reaching approximately 338.15 parts per million in august 2010 [1]. These kinds of facts and statistics have introduced a lot of room for improvement in energy efficiency for industrial applications through modernization and use of renewable energy sources such as solar Photovoltaic Systems (PV).The purpose of this thesis work is to make a preliminary design and simulation of the solar photovoltaic system which would attempt to cover the energy demand of the initial part of the pickling line hydraulic system at the SSAB steel plant. For this purpose, the energy consumptions of this hydraulic system would be studied and evaluated and a general analysis of the hydraulic and control components performance would be done which would yield a proper set of guidelines contributing towards future energy savings. The results of the energy efficiency analysis showed that the initial part of the pickling line hydraulic system worked with a low efficiency of 3.3%. Results of general analysis showed that hydraulic accumulators of 650 liter size should be used by the initial part pickling line system in combination with a one pump delivery of 100 l/min. Based on this, one PV system can deliver energy to an AC motor-pump set covering 17.6% of total energy and another PV system can supply a DC hydraulic pump substituting 26.7% of the demand. The first system used 290 m2 area of the roof and was sized as 40 kWp, the second used 109 m2 and was sized as 15.2 kWp. It was concluded that the reason for the low efficiency was the oversized design of the system. Incremental modernization efforts could help to improve the hydraulic system energy efficiency and make the design of the solar photovoltaic system realistically possible. Two types of PV systems where analyzed in the thesis work. A method was found calculating the load simulation sequence based on the energy efficiency studies to help in the PV system simulations. Hydraulic accumulators integrated into the pickling line worked as energy storage when being charged by the PV system as well.

A voltage source inverter is commonly used to supply a variable frequency variable voltage to a three phase induction motor in a variable speed application. A suitable pulse width modulation (PWM) technique is employed to obtain the required output voltage in the line side of the inverter. Real-time methods for PWM generation can be broadly classified into triangle comparison based PWM (TCPWM) and space vector based PWM (SVPWM). In TCPWM methods such as sine-triangle PWM, three phase reference modulating signals are compared against a common triangular carrier to generate the PWM signals for the three phases. In SVPWM methods, a revolving reference voltage vector is provided as voltage reference instead of three phase modulating waves. The magnitude and frequency of the fundamental component in the line side are controlled by the magnitude and frequency, respectively, of the reference vector. The fundamental line side voltage is proportional to the reference magnitude during linear modulation. With sine-triangle PWM, the highest possible peak phase fundamental voltage is 0.5Vdc, where Vdc is the DC bus voltage, in the linear modulation zone. With techniques such as third harmonic injection PWM and space vector based PWM, the peak phase fundamental voltage can be as high as (formula) (i.e., 0:577Vdc)during linear modulation. To increase the line side voltage further, the operation of the VSI must be extended into the overmodulation region. The overmodulation region extends upto the six-step mode, which gives the highest possible ac voltage for a given (formula). In TCPWM based methods, increasing the reference magnitude beyond a certain level leads to pulse dropping, and gradually leads to six-step operation. However, in SVPWM methods, an overmodulation algorithm is required for controlling the line-side voltage during overmodulation and to achieve a smooth transition from PWM to six-step mode. Numerous overmodulation algorithms have been proposed in the literature for space vector modulated inverter. A well known algorithm among these divides the overmodulation zone into two zones, namely zone-I and zone-II. This is termed as the 'existing overmodulation algorithm' here. This algorithm is modified in the present work to reduce computational burden without much increase in the line current distortion. During overmodulation, the fundamental line side voltage and the reference magnitude are not proportional, which is undesirable from the control point of view. The present work ensures a linear relationship between the two. Apart from the fundamental component, the inverter output voltage mainly consists of harmonic components at high frequencies (around switching frequency and the integral multiples) during linear modulation. However, during overmodulation, low order harmonic components such as 5th, 7th, 11th, 13th etc., are also present in the output voltage. These low order harmonic voltages lead to low order harmonic currents in the motor. The sum of the lower order harmonic currents is termed as 'lower order current ripple'. The present thesis proposes a method for estimation of lower order current ripple in real-time. In closed loop current control, the motor current is fed back to the current controller. During overmodulation, the motor current contains low order harmonics, which appear in the current error fed to the controller. These harmonic currents are amplified by the current error amplifier deteriorating the performance of the drive. It is possible to filter the lower order harmonic currents before being fed back. However, filtering introduces delay in the current loop, and reduces the bandwidth even during linear modulation. In the present work, the estimated lower order current ripple is subtracted from the measured current before the latter is fed back to the controller. The estimation of lower order current ripple and the proposed current control are verified through simulation using MATLAB/SIMULINK and also experimentally on a laboratory prototype. The experimental setup comprises of a field programmable gate arrays (FPGA) based digital controller, an IGBT based inverter and a four-pole squirrel cage induction motor. (Pl refer the original document for formula)

The properties of linear induction motor and areas of its application are analyzed; frequency converters and their control methods are discussed in this final work. Methods to realize a pulse width modulation are analyzed, scalar and vector control principles as well as perspectives of perfection of semiconductor commutating elements and control systems are discussed. The principle of operation of control systems applied in frequency converters is analyzed On the base of analysis mathematical and Simulink model of linear induction motor in α-β reference frame is developed, mathematical and Simulink models of frequency controlled linear induction drives are carried out. Two models of linear frequency controlled induction drive: scalar and vector control are investigated, transient characteristics of inverter output voltage, currents of linear motor, developed force and linear speed are analyzed and results of different control principles are compared.

Les variateurs de vitesse modernes sont exclusivement basés sur l’utilisation de moteurs triphasés alimentés par des onduleurs à modulation de largeur d’impulsion (MLI). La plupart des applications modernes de la variation de vitesse, comme les ascenseurs, les grues et les machines-outils sont caractérisées principalement par un rapport élevé entre la puissance crête et la puissance moyenne et une forte demande de freinage à la puissance nominale. Dans les variateurs de vitesse ordinaires, l’énergie de freinage, qui est de l’ordre de 30 à 50% de l’énergie consommée, est dissipé dans une résistance. Outre les problèmes « énergétiques », les interruptions et dégradations de la tension d’alimentation ainsi que la qualité du courant d’entrée et la fluctuation de la charge, sont d’autres questions à aborder et à résoudre.Le super-condensateur dédié aux applications de conversion de puissance est ainsi proposé. Un variateur de vitesse équipé avec des super-condensateurs est présenté dans la thèse. Les super-condensateurs, interconnectés par un convertisseur DC-DC sont utilisés pour stocker et ré-injecter l'énergie de freinage. De plus, le convertisseur DC-DC contrôle le courant du redresseur et la tension du bus DC. Le THD du courant d’entrée est ramené à 30%. La tension du bus DC est élevée et en permanence contrôlée et lissée indépendamment de la charge et de la variation de la tension réseau. Pour terminer, les pics de puissance peuvent être lissés. La solution présentée est analysée théoriquement et vérifiée par un ensemble de simulations et expérimentations. Les résultats sont présentés et commentés / Modern controlled electric drives are exclusively based on three-phase motors that are fed from three-phase pulse width modulated (PWM) inverters. Most of modern controlled electric drive applications, such as lifts, cranes and tooling machines are characterized by high ratio of the peak to average power, and high demand for braking at the rated power. In ordinary drives, the braking energy, which represents 30-50% of the consumed energy, is dissipated on a braking resistor. Apart from the “energetic” issue, the mains interruption and degradation, the input current quality and the load fluctuation are additional issues to be addressed and solved.The ultra-capacitor dedicated for power conversion applications has been discussed. In comparison to electrochemical batteries, the ultra-capacitors have higher power density and efficiency, longer life time and greater cycling capability. This makes the ultra-capacitor an excellent candidate for power conversion applications.A new electric drive converter equipped with the ultra-capacitor is presented in the dissertation. The ultra-capacitor with an inter-connection dc-dc converter is used to store and recover the drive braking energy. Moreover, the dc-dc converter controls the rectifier current and the dc bus voltage. The drive input current THD is reduced to 30%. The dc bus voltage is boosted and controlled constant and ripple free regardless on the load and the mains voltage variation. Moreover, the drive input peak power can be smoothed. The presented solution is theoretically analysed and verified by set of simulations and experiments. The results are presented and discussed