No description available.

This work uses different size of strain gages (Gage Grid Length: 10mm, 1mm, 0.2mm) to measure the stress distributions of metal (Al 6061-T6) and composite (laminates of [0/+45/90/-45]2S and [0/90]4S layers ) with a central circular hole and a crack. Both the SCF (Stress Concentration Factor) and SIF (Stress Intensity Factor) are found to consider the stress scatteredness of experimental data in contrast to micro- mechanics. To understand the strain gage size effect is our main purpose in measuring both types of materials. The size effect of strain gage we find appears obviously in the measuring position with stress changing significantly. We find that the size of strain gage is bigger; the error of stress is higher. Analyzing the stress scattering around a central circular hole, we obtain the experimental result that the stress will first reduce drastically from central circular hole edge and then keep uniform. In analysis of the stress scattering around the crack tip, we observe that first stress rises quickly from the specimen¡¦s free edge to the top of crack tip with a maximum value, and the stress keeps a nominal value in the specimen central part. Comparing the empirical result of SCF and SIF, we find that the data of 0.2mm of strain gage close to the theoretical solution, while those of 1mm and 10mm strain gages appear inexact in measuring and calculating SCF and SIF.

None

In this study, we examine the impact of political factors in corporate governance on the performance of firm. The major difference between this study and other corporate governance studies is use of three stage least square method, which can estimate the cause and effect between endogenous variable. Our sample consists of 100 firms listed in Taiwan Stock Exchange. We find that the political directors harm the performance of firm.

Abstract The South China is the largest marginal sea in the western Pacific. It¡¦s unique geographic settings and high sedimentation rates preserve the paleo- climatic signals with larger amplitude than those from the open ocean. In this study, grain size and elemental compositions of the fine fractions (<63 mm) from the sediments collected by the ODP Leg 184 Sites 1143 and 1146 were analyzed to reconstruct the depositional settings for the last 8 My. Particle size and elements analyses, in conjunction with the carbonate contents and sedimentation rates from core sediments, reflect the possible increase in precipitation, which was caused by the strengthened summer monsoon between 5 and 3 Ma. In addition to the grain sizes change from silt-domain to clay-domain, Ti/Al ratio of sediments increase while the Si/Al, Zr/Al, and K/Al ratios decrease, which could be related to the enhanced sediments input through rivers. These environmental changes could be attributed to the uplift of Tibet plateau and the formation of Western Pacific Warm Pool. On the contrary, the impact of climate changes is not evident in the loess plateau in the northwestern China. It is likely that the climate in the South China Sea became warm and humid from 5 to 3 Ma were regional changes. Key words: Grain size, element analyses, South China Sea, summer monsoon

To achieve predictive capability for complex environmental systems with coagulation and arsenic sorption, a unified improved coagulation model coupled with arsenic sorption was developed. A unified coagulation model coupled with arsenic sorption was achieved by the following steps: (1) an improved discretized population balance equation (PBE) was developed to obtain the exact solution of conventional coagulation, (2) the improved PBE was extended to an adjustable geometric size interval having higher numerical stability, accuracy, and computational efficiency than existing models for fractal aggregate coagulation that includes agglomeration and fragmentation, (3) a surface complexation equilibrium model and a sorption kinetic model was introduced to predict arsenic sorption behavior onto hydrous metal oxide surfaces, and (4) an improved discretized PBE was coupled with arsenic sorption kinetics and equilibrium models by aid of collision efficiency ?? depending on surface charge (potential) on the hydrous metal oxide particles, colliding particle size ratio, and fluid strain-rate in applied flow system. The collision efficiency ?? into the improved (r,r)ij(r,r)ijdiscretized coagulation model for fractal aggregate yielded a unified improved coagulation model coupled with arsenic sorption kinetics and the equilibrium model. Thus, an improved unified coagulation model could provide high statistical accuracy, numerical stability, and computational efficiency to enhance predictive capability for behavior of arsenic sorption and fractal colloid particle aggregation and break-up, simultaneously. From the investigation, it is anticipated that the unified coagulation model coupled with arsenic sorption kinetics and equilibrium will provide a more complete understanding of the arsenic removal mechanism and its application to water/wastewater treatment. Further, this coupled model can be applied to other water and wastewater treatment systems combined with sorption and filtration processes. These combined processes can be optimized by the coupled model that was developed in this study. By simulating the arsenic sorption and particle size distribution as a pretreatment before filtration (sand filtration or membrane filtration), the overall arsenic removal efficiency and operation cost can be estimated.

Total mercury (Hg) levels were determined in the tissues of ten taxa of pelagic fishes, with a special emphasis on apex predators (large vertebrates). Highest Hg levels were observed in blue marlin (Makaira nigricans), carcharhinid sharks (Genus Carcharhinus) and little tunny (Euthynnus alletteratus), ranging from 1.08 to 10.52 ppm. Moderate to low concentrations (<1.0 ppm) were observed in blackfin tuna (Thunnus atlanticus), cobia (Rachycentron canadum), dolphinfish (Coryphaena hippurus), greater amberjack (Seriola dumerili), king mackerel (Scomberomorus cavalla), wahoo (Acanthocybium solandri) and yellowfin tuna (Thunnus albacares). For the majority of species examined, Hg level did not vary significantly between locations (Texas and Louisiana) and years (2002 and 2003). The relationship between Hg level and fish size/weight was also explored and six taxa (blackfin tuna, carcharhinid sharks, dolphinfish, king mackerel, wahoo, yellowfin tuna) showed significant positive relationships between Hg level and body size and/or weight. Natural dietary tracers, stable isotopes (15N, 13C) and fatty acids were used to evaluate the relationship between Hg and trophic position and the relationship between Hg and dietary history. Stable nitrogen isotope analysis showed that Hg levels in fish tissues were positively associated with trophic position. Based on the 13C and 15N values of pelagic consumers examined in this study, three natural groups were identified with cluster analysis, and the same groupings were detected based on fatty acid profiles. This not only confirmed the existence of these natural groupings, but also indicated that the distinguishing factors for the grouping was likely connected with the dietary history of these fishes. The classification tree based on the fatty acid profiles of pelagic fishes readily separated fishes from different regions, suggesting that diets of pelagic taxa within the same region are similar or these consumers share a common source of organic matter in their food web. Findings from this study complement other Hg investigations conducted in the Gulf and also furthered our understanding of the link between feeding ecology and Hg accumulation. Moreover, the combined use of stable isotope and fatty acid techniques provided new insights on the dietary history of pelagic fishes in the Gulf of Mexico.

Marine aggregates are an important means of carbon transfers downwards to the deep ocean as well as an important nutritional source for benthic organism communities that are the ultimate recipients of the flux. During these last 10 years, data on size distribution of particulate matter have been collected in different oceanic provinces using an Underwater Video Profiler. The cruise data include simultaneous analyses of particle size distributions as well as additional physical and biological measurements of water properties through the water column. First, size distributions of large aggregates have been compared to simultaneous measurements of particle flux observed in sediment traps. We related sediment trap compositional data to particle size (d) distributions to estimate their vertical fluxes (F) using simple power relationships (F=Ad^b). The spatial resolution of sedimentation processes allowed by the use of in situ particle sizing instruments lead to a more detailed study of the role of physical processes in vertical flux. Second, evolution of the aggregate size distributions with depth was related to overlying primary production and phytoplankton size-distributions on a global scale. A new clustering technique was developed to partition the profiles of aggregate size distributions. Six clusters were isolated. Profiles with a high proportion of large aggregates were found in high-productivity waters while profiles with a high proportion of small aggregates were located in low-productivity waters. The aggregate size and mass flux in the mesopelagic layer were correlated to the nature of primary producers (micro-, nano-, picophytoplankton fractions) and to the amount of integrated chlorophyll a in the euphotic layer using a multiple regression technique on principal components. Finally, a mesoscale area in the North Atlantic Ocean was studied to emphasize the importance of the physical structure of the water column on the horizontal and vertical distribution of particulate matter. The seasonal change in the abundance of aggregates in the upper 1000 m was consistent with changes in the composition and intensity of the particulate flux recorded in sediment traps. In an area dominated by eddies, surface accumulation of aggregates and export down to 1000 m occured at mesoscale distances (<100 km).

Tissue equivalent proportional counters are frequently used to measure dose and dose equivalent in mixed radiation fields that include neutrons; however, detectors simulating sites 1?m in diameter underestimate the quality factor, Q, for low energy neutrons because the recoil protons do not cross the detectors. Proportional counters simulating different site-sizes can be used to get a better neutron dose equivalent measurement since the range and stopping power of protons generated by neutrons in the tissue-equivalent walls depend on the energy of the primary neutrons. The differences in the spectra measured by different size detectors will provide additional information on the incident neutron energy. Monte Carlo N-particle extended (MCNPX) code was used to simulate neutron transportation in proportional counters of different simulated tissue diameter. These Monte Carlo results were tested using two solid walled tissue equivalent proportional counters, 2mm and 10mm in diameter, simulating tissue volumes 0.1?m and 0.5?m in diameter, housed in a single vacuum chamber. Both detectors are built with 3mm thick tissue equivalent plastic (A-150) walls and propane gas inside for dose measurement. Using these two detectors, the spectra were compared to determine the underestimation of y for large detector, and thereby obtain more information of the incident neutron particles. Based on the MCNPX simulation and experimental results, we can see that the smaller detector produces a larger average lineal energy than the larger detector, which means the larger detector (0.5?m diameter tissue equivalent size) underestimates the Q value for the low energy neutron, therefore underestimates the effective dose. These results confirm the results of the typical analysis of lineal energy as a function of site size.

The present research adopts with the application of the sequential mesh regulations on bottom trawl to study how to protect economic immature fishes. The experimental design includes first the determination of the relationships of fish size and the price per weight (PPW) of the economic demersal fishes sold as the one-hundred Dollars-a-plate manner in Tunkang and Zihguan fish markets in the southwestern coast of Taiwan. The obtained results were used to yield the catch of smaller size fishes and the lower PPW for regulating the economic immature fishes. The three kinds of regulated fish size were defined as the smallest surveyed size, smallest economic size, and smallest matured size. These regulated fish size were used as the body lengths of 50% selection (L50) to calculate the regulating mesh size. This study presents that four steps are needed for the sequential mesh regulations of bottom trawl in the southwestern Taiwan. The first step is to regulate the mesh size between 35 and 45 mm for banning bottom trawler to catch fishes smaller than the smallest surveyed fish size. The objective of first step is to reduce the bycatch without affecting the landings of economic immature fishes sold in the fish market. The second step is to regulate the mesh size between 50 and 60 mm for banning bottom trawler catch fishes smaller than the smallest economic fish size, and to reduce the catch of smaller size fishes and the lower PPW of economic immature fishes. The third step is to regulate the mesh size between 65 and 70 mm for banning bottom trawler to catch fishes smaller than the smallest matured fish size. This is also to reduce the catch of economic immature fishes, and to increase the recruitment. The fourth step is to regulate the mesh size between 70 and 82 mm for banning bottom trawler catching the lower PPW of economic fishes that is not large enough to reach their optimal PPW. The present research provides important data results for regulating the mesh size of bottom trawler operation for the achievement of sustainable coastal fishery in Taiwan.