<p>Den här rapporten undersöker möjligheterna att standardisera och modulariseralågspänningsställverken i ABB:s HVDC-stationer. Anläggningarna har idag heltkundanpassade lösningar, vilket tar för lång tid att projektera för att kunna svara mot denökade efterfrågan på HVDC-lösningar.Arbetet baseras på tretton stationer i åtta pågående och avslutade projekt. Dessa skiljer sigtill storlek, lokalisering, ålder, dokumentation och stationstyp.För att kunna erhålla en korrekt men samtidigt överskådlig bild överlågspäninngsställverkets laster, granskades varje stations dokumentation. Informationensammanställdes i en databas, som visade de belastningar som var ständigt återkommande.Arbetet visar att det är möjligt att standardisera valda delar av lågspänningsställverken, docktas ingen hänsyn till vare sig storleks- eller kostnadsökning. Arbetet behandlar de mestfrekvent förekommande brytarstorlekarna för de typiska lasterna.Det standardförslag som tagits fram har anpassats för att täcka de brytarstorlekar somförekommit för de typiska lasterna i stationerna. För strömriktartransformatorerna erbjudstvå varianter av skåp, medan det för övriga laster endast förekommer ett alternativ.En alternativ lösning på problemet skulle kunna vara att ta fram en standard för varjestationstyp. Detta förutsätter dock ett större antal projekt av varje typ än de som tagits medi detta arbete.</p> / <p>This thesis investigates the possibilities to standardize and modularize the low-voltageswitchgear in ABB’s HVDC-stations. The reason for this is that the customized solutionthey use today take too much engineering and production time to meet the expectedincrease of projects.The report is based on thirteen stations in eight different closed or ongoing projects. Theselection was based on the station size, geographical location, commissioning year andstation type.In order to obtain a correct representation of the loads in the low-voltage switchgear, therelevant station documentation was reviewed and compiled in a database. The data wasthen analyzed to determine the most frequently occurring loads and their characteristics.The thesis shows that it’s possible to standardize some components in the low-voltageswitchgear. However, this report doesn’t take into consideration any possible increase oftotal size and cost. It also shows the most frequent sizes of the circuit breakers for each ofthe common loads.The standard proposition for the common loads was developed to cover all the occurringsizes of the circuit breakers in the stations. For the converter transformers coolingequipment there’s two different cubicles to choose from, while the remaining loads islimited to a single alternative.An alternative solution could be to develop a standard for each occurring station type.However, this would require that the data from a larger number of projects, for all stationtypes, are reviewed and compiled.</p>

Denna avhandling är fokuserad på modellering av elkraftsystemkomponenter och deras representation vid simuleringar av elkraftsystem. Avhandlingen jämför olika linjäriseringstekniker. Dessa tekniker är såväl numeriska som analytiska och används vid linjärisering av ett dynamiskt system. Efter en linjärisering är det möjligt att beräkna egenvärdena av det linjäriserade systemet samt använda andra verktyg ämnade för studier av linjära system. I avhandlingen visas hur olika linjäriseringtekniker influerar egenvärdesberäkningen av det linjära systemet. I avhandlingen tas fram bandviddsreducerade linjära modeller av en kraftsystemkomponent med hjälp av två tekniker. Senare görs simuleringar med de linjära modellerna tillsammans med ett introducerat gränssnitt. Den studerade kraftsystemkomponenten är en tyristorstyrd seriekondensator (TCSC). En fördel med att använda en linjär representation av en kraftsystemkomponent är att det förenklar simuleringarna. Storleken på komplexiteten av en simulering vid lösandet av ekvationerna minskar och den konsumerade fysiska tiden att simulera minskar. En nackdel med en linjär modell är att dess giltighet kan vara begränsad. Behovet av att bygga linjära modeller av kraftsystemkomponenter torde även finnas i framtiden. Med dagens horisont (år 2006) finns behov av att bygga linjära modeller utgående från detaljerade modeller av bl a högspända likströmslänkar (HVDC-länkar), reaktiva effektkompensatorer (SVC) samt tyristorstyrda seriekondensatorer (TCSC). Hur skall dessa representeras när vi vill studera dynamiken av ett helt kraftsystem och det då är nödvändigt att reducera deras komplexitet? Denna frågeställning uppkommer när vi vill genomföra tidsdomänsimuleringar på en inte alltför detaljerad nivå av de individuella kraftsystemkomponenterna eller när vi vill linjärisera kraftsystemet för att studera dess stabilitet med hjälp av småsignalanalys. / This thesis is focused in modelling of power system components and their representation in simulations of power systems. The thesis compares different linearization techniques. These techniques are both numerical as well as analytical and are utilized when linearization of a dynamic system is desired. After a linearization it is possible to calculate the eigenvalues of the linearized system as well as to perform other applicable activities on a linear system. In the thesis it is shown how the linearization techniques influence the calculation of eigenvalues of the linear system. In the thesis bandwidth-reduced linear models of a power system component are developed using two techniques. The simulations with the linear models are done with an introduced interface system. The studied power system component is a Thyristor-Controlled Series Capacitor (TCSC). One advantage with using a linear representation of a power system component is that it simplifies the simulations. The size of the complexity of a simulation when solving the equations decreases and the consumed physical time to simulate becomes shorter. A disadvantage of a linear model is that its validity might be limited. The need of building linear models of power systems will continue to attract interest in the future. With the horizon of today (year 2006) there is a need of among other models to build linear models of detailed models of High Voltage Direct Current-links (HVDC-links), Static Var Compensators (SVCs), as well as Thyristor-Controlled Series Capacitors (TCSCs). How should these be represented when we want to study the dynamics of a whole power system and it is necessary to reduce their complexity? This question rises when we want to perform time-domain simulations with a not too detailed level of complexity of each individual power system component or if we want to linearize the power system and study it within small-signal stability analysis. / QC 20100915

In  this  Master Thesis  a  review  of  different  type  of  vertical  axis  wind turbines (VAWT)  and  a preliminary investigation of a new kind of VAWT are presented. After an introduction about the historical background of wind power, the report deals with a more accurate analysis of the main type of VAWT, showing their characteristics and their operations. The aerodynamics of the wind turbines and a review of different type on generators that can be used to connect the wind mill to the electricity grid are reported as well. Several statistics are also presented, in order to explain how the importance of the wind energy has grown  up  during  the  last  decades  and  also  to  show  that  this development  of  the  market  of  wind power  creates  new  opportunity  also  for VAWT,  that  are  less  used  than  the  horizontal  axis  wind turbine (HAWT). In the end of 2009 a new kind of vertical axis wind turbine, a giromill 3 blades type, has been built in Falkenberg, by the Swedish company VerticalWind. The tower of this wind turbine is made by wood,  in  order  to  get  a  cheaper  and  more environment  friendly  structure,  and  a  direct  driven synchronous multipole with permanent magnents generator is located at its bottom. This 200 kW VAWT represents the intermediate step between the 12 kW prototype, built in collaboration with the Uppsala University, and the common Swedish commercial size of 2 MW, which is the goal of the company. A  preliminary  investigation  of  the  characteristics  of  this  VAWT  has  been done, focusing  in particular on the value of the frequency of resonance of the tower, an important value that must be never reached during the operative phase in order to avoid serious damage to all the structure, and on the power curve, used to evaluate the coefficient of power (Cp) of the turbine. The results of this investigation and  the steps  followed  to  get  them  are  reported.  Moreover  a  energy production analysis of the turbine has been done using WindPro, as well as a comparison with and older type on commercial VAWT.

This report seeks to evaluate and predict possible power quality issues regarding Fortums engagement in the project of Stockholm Royal Seaport. Stockholm Royal Seaport is a city district planned by Stockholm Municipality to be constructed based on sustainable urban city principles. Fortum has, together with additional partners, engaged in the challenge to create a sustainable energy system. This is thought to be achieved through several measures. Energy saving actions are incorporated at several levels and there is a plan to create a “smart grid” for the electricity supply. A smart grid has no strict definition but in this case a key feature is “demand-response” which effectively means a way to optimize the consumption to have a more balanced consumption over the 24 hours of a day. One of the key components in the smart grid is the “active house” which is planned to have several specific features separating it from an ordinary house. It is planned to have its own contribution to electricity production using solar cells and an energy storage using batteries. Another feature is thought to be both automation and economic incentives measures to achieve peak load reduction. This thesis has taken the perspective of the end customer in the active house and has tried to evaluate the power quality to be experienced. An investigation regarding the different components has been carried out to get an overview from the mentioned perspective and identify possible problems or issues that may require attention in the realization of Stockholm Royal Seaport. It has been found that no major problems are to be expected but some smaller issues has arisen that might be worthwhile giving some attention.

<p>In reregulated and restructured electricity markets the production and retail of electricity is conducted on competitive markets, the transmission and distribution on the other hand can be considered as natural monopolies. The financial regulation of Distribution System Operators (DSOs) has in many countries, partly as a consequence of the restructuring in ownership, gone through a major switch in regulatory policy. From applying regulatory regimes were the DSOs were allowed to charge their customers according to their actual cost plus some profit, i.e. cost-based regulation, to regulatory models in which the DSOs performance are valued in order to set the allowable revenue, i.e. Performance-Based Regulation (PBR). In regulatory regimes that value performance, the direct link between cost and income is weakened or sometimes removed. This give the regulated DSOs strong cost cutting incentives and there is consequently a risk of system reliability deterioration due to postponed maintenance and investments in order to save costs. To balance this risk the PBR-framework is normally complemented with some kind of quality regulation (QR). How both the PBR and QR frameworks are constructed determines the incentive that the DSO will act on and will therefore influence the system reliability development.</p><p>This thesis links the areas of distribution system reliability and performancebased regulation. First, the key incentive features within PBR, that includes the quality of supply, are identified using qualitative measures that involve analyses of applied regulatory regimes, and general regulatory policies. This results in a qualitative comparison of applied PBR models. Further, the qualitative results are quantified and analysed further using time sequential Monte Carlo simulations (MCS). The MCS enables detailed analysis of regulatory features, parameter settings and financial risk assessments. In addition, the applied PBRframeworks can be quantitatively compared. Finally, some focus have been put on the Swedish regulation and the tool developed for DSO regulation, the Network Performance Assessment Model (NPAM), what obstacles there might be and what consequences it might bring when in affect.</p>

As wind power expands rapidly worldwide, it is becoming more common to build wind farms in alpine locations where the wind resources often are good and conflicting interests are few. This is evident in Sweden where a substantial portion of the large wind parks planned are to be built in cold climate locations. The fact that icing of turbine blades and sensors can severely impact the production raises the question how large the losses are. In this thesis 10 wind parks comprising 45 turbines, well dispersed throughout Sweden are investigated. Daily production figures are compared to wind data from the MERRA reanalysis data-set in order to see if it is possible to determine the level of losses during the winter period caused by cold climate. A method is suggested where a relationship between daily production and daily average wind speed is established using representative summer days. This relationship is then used to calculate an expected production for the winter period. Losses are concluded as the difference between expected and actual production. The method did not produce a consistent and reliable result for the sites investigated. However, the method captures the overall trend with higher losses in the north of Sweden compared to the sites in the south where little or no icing is likely. At the sites where icing is expected, losses in the range of 10 to 20% of the annual production were calculated.

Society relies more and more on a continuous supply of electricity. However, while underinvestments in reliability lead to an unacceptable number of power interruptions, overinvestments result in too high costs for society. To give incentives for a socioeconomically optimal level of reliability, quality regulations have been adopted in many European countries. These quality regulations imply new financial risks for the distribution system operator (DSO) since poor reliability can reduce the allowed revenue for the DSO and compensation may have to be paid to affected customers.This thesis develops a method for evaluating the incentives for reliability investments implied by different quality regulation designs. The method can be used to investigate whether socioeconomically beneficial projects are also beneficial for a profit-maximizing DSO subject to a particular quality regulation design. To investigate which reinvestment projects are preferable for society and a DSO, risk-based methods are developed. With these methods, the probability of power interruptions and the consequences of these can be simulated. The consequences of interruptions for the DSO will to a large extent depend on the quality regulation. The consequences for the customers, and hence also society, will depend on factors such as the interruption duration and time of occurrence. The proposed risk-based methods consider extreme outage events in the risk assessments by incorporating the impact of severe weather, estimating the full probability distribution of the total reliability cost, and formulating a risk-averse strategy. Results from case studies performed show that quality regulation design has a significant impact on reinvestment project profitability for a DSO. In order to adequately capture the financial risk that the DSO is exposed to, detailed risk-based methods, such as the ones developed in this thesis, are needed. Furthermore, when making investment decisions, a risk-averse strategy may clarify the benefits or drawbacks of a project that are hard to discover by looking only at the expected net present value. / QC 20110530

Flywheel systems are attractive in hybrid and electric vehicles due to their ability to handle power during acceleration and braking. The combination of a flywheel device with a battery source has several advantages such as high peak power capacity, high energy density and reduction in the number of charge/discharge cycles of the battery. A flywheel based all-electric driveline is investigated in this thesis. The novelty of the system consists in the use of a double wound flywheel machine, which divides the system in two different power levels. Due to this configuration, the system becomes efficient and can handle the power developed during fast dynamical processes. The complete driveline consists of three main components: the battery, the flywheel machine and the wheel motor. The High-Power (HP) side of the driveline connects the flywheel machine to the wheel motor, whereas the Low-Power (LP) side connects the flywheel machine to the battery. The connections of different components of the system are made electrically through power converter devices. The present thesis focuses on the electrical converters and control strategies used in the flywheel based all-electric driveline. The control of power converters is responsible for the logic and functionality of the driveline, being a challenging step within this project. Different power converter topologies have been investigated: a DC/DC plus a DC/AC converter on the LP side, and an AC/DC/AC converter on the HP side. The design and assembly of the power electronics and their control scheme have been successfully implemented. Different control strategies have been suggested and a complete scaled driveline has been assembled and tested based on previous simulation results. Results have confirmed the functionality of the driveline, where smoothed output power has been obtained from the battery, whereas the flywheel handles power transients on the traction side. An average efficiency of about 87% (battery to wheels) has been obtained. The power converter systems have been shown to be efficient and robust, with control strategies able to handle the peak energy flow in the system. A regenerative braking strategy has been simulated and a wheel-to-wheel efficiency of about 80% has been estimated.

Utsikterna att kunna genomföra en återstart av de två små vattenkraftverk som behandlas i denna rapport år goda. Förutsättningarna är gynnsamma i så måtto att planerna för återstarten ligger väl i linje med praxis som etablerats genom avgöranden i de högre rättsliga instanserna gällande liknande fall. Ägaren planerar att driva verksamheten i stort sett så som den ursprungligen bedrevs, vilket visat sig betydelsefullt för att få återupptag av nedlagd vattenkraftverksamhet godkänt Dessa kraftverk är små, väldigt små. Detta betyder att investeringskostnaderna måste minimeras om det skall finns någon chans att uppnå en acceptabel återbetalningstid för investeringen. Några kostnader kan inte påverkas alls, till exempel anslutningen till elnätet. Vissa, såsom de för nya tuber, intagsgaller, samt kabel och utrustning till kraftverken, kan påverkas i någon mån genom att omsorgsfullt välja leverantörerna av utrustningen, samt välja de mest kostnadseffektiva (ofta liktydigt med de enklaste men ändå fungerande) lösningarna. Några få komponenter, såsom generatorn, kan gå att få tag på som begagnade, vilket hjälper till att hålla nere kostnaderna. Slutligen bör inte de pengar som finns att spara på att göra så mycket som möjligt av arbetet själv underskattas. / The prospects of achieving a restart of the two small hydropower plants studied in this report are good. The basic conditions are favourable in the sense that the plans for a restart are well in line with accepted procedures such as established by decisions in the highest courts regarding similar cases. The owner plans to run the operation in essentially the same way it was originally run, a circumstance which has proven to be important when seeking to get restart of discontinued hydropower activities approved. These power plants are small, very small. This means that investment costs has to be minimized if there is to be any chance of achieving an acceptable pay-off time for the investment. Some can't be affected at all, such as the cost for getting connected to the power network. Some, such as those of new tubes, intake bars and electrical wiring and equipment for the plants, can be affected to some extent by carefully choosing the suppliers of the equipment and choosing the most cost-efficient (in most cases synonymous with the simplest but yet functional) solutions. A few components, such as the generator, can possibly be obtained as used equipment, which helps keeping the costs down. Lastly, the potential of saving money by doing as much as possible of the work yourself should not be underestimated.

<p>In this thesis a method for evaluating investments in small scale hydro power is presented. An analysis of the future position that small scale hydro production will have on the Nordic electricity market is also carried out. This is done by an inventory of technology and economic and environmental aspects. The inventory is also a guide as to how the project should be implemented.</p><p>Hydrolyzer is the name of the Excel tool developed to evaluate investments. The tool requests input data from the user and then evaluates the investment and generates a sensitivity analysis. Several projects or scenarios can be entered and are then ranked after profitability. For example a major repair can be compared to a new power station and tailrace excavations are possible to evaluate.</p><p>The profitability of small scale hydro power investment mainly depends on the size of the initial investment. The power generation costs average among the lowest among possible future power plants. This trend applies to comparisons between renewable and fossil production plants. Electricity prices will probably not fall back to historic levels, due to fuel shortage and increasing environmental concerns. Price prognosis therefore indicates that investments, which on calculation seem profitable, will also be so.</p><p>Small scale hydro investments at existing dams are socio-economically and environmentally sound. The investments contribute with clean power but have local environmental impacts. At existing dams this damage is already done and expensive to undo if at all possible. The</p><p>environmental impacts can be dramatically reduced by construction of fish passages etc. In the thesis an example shows that economic resources for environmental constructions often depend on electricity certificates and that residual flows aren’t greater than necessary.</p><p>An investment project should start by evaluating possible scenarios that the hydro power permit may result in. The transmission capacity should also be investigated at an early stage. Materials should be chosen with care and evaluated with a star diagram. A synchronous</p><p>generator without a speed increaser should be considered for the hydro investment. The turbine type should be suggested by the manufacturer who also has to be able to guarantee efficiencies and cavitation resistance. Submersible turbines should be considered as they significantly reduce building costs. Involved persons need to be experienced and the tenders should be lump sums except for costs which are difficult to determine.</p> / <p>I detta examensarbete presenteras en metod för att enkelt kunna göra en bedömning av om det är lönsamt att investera i småskalig vattenkraft. Det undersöks också hur den småskaliga vattenkraftens förutsättningar på den framtida elmarknaden ser ut. Detta görs genom en inventering av teknik, ekonomi och miljöaspekter. Inventeringen ger också svar på hur ett investeringsprojekt ska genomföras.</p><p>Hydrolyzer kallas excelverktyget som utvecklats för att göra lönsamhetsbedömningen. Det fungerar så att indata matas in och sedan beräknas investeringens lönsamhet och en känslighetsanalys genereras. I verktyget kan olika investeringsalternativ läggas in som sedan beräknas och rangordnas. Exempelvis kan en större reparation jämföras med att bygga en helt ny station eller rensningar utvärderas.</p><p>Småskalig vattenkrafts lönsamhet och produktionskostnader beror till största del på hur stor grundinvesteringen blir. Produktionskostnaden är i snitt bland de billigaste produktionsslagen som kan komma att byggas i framtiden. Trenden gäller vid jämförelse både bland förnybara</p><p>och bland övriga produktionsslag. På elmarknaden pekar det mesta på att priset inte kommer att sjunka tillbaka till historisk nivå. Detta då bränslena är bristvara och att en allt större miljöhänsyn krävs vilket pressar upp priset. Prisutvecklingen talar för att om ett investeringsbeslut tas där kalkylen visar lönsamhet så kommer detta också att infalla.</p><p>Investeringar i småskalig vattenkraft vid befintliga dammar bedöms vara samhällsekonomiskt och miljömässigt fördelaktigt. Småskalig vattenkraft producerar ren el men ger miljöstörningar lokalt. Vid befintliga dammar är dock denna skada redan skedd och väldigt kostsamt att återställa om det överhuvudtaget är möjligt. Miljöproblemen kan dock kraftigt minskas genom byggnation av fiskpassager m.m. Möjligheten att bygga vid befintliga dammar kan vara beroende av elcertifikat om de lokala förutsättningarna är dåliga. I rapporten visas också genom ett exempel att ekonomin för miljöförbättrande åtgärder oftast är beroende av elcertifikat och att mintappningar inte är större än nödvändigt.</p><p>Investeringsprojektet bör börja med att ta fram scenarion att utvärdera utifrån hur vattendomen kan tänkas bli. Elnätets kapacitet ska också undersökas tidigt. Materialen ska väljas med omsorg och utvärderas med stjärndiagram. En synkron generator utan växel ska</p><p>övervägas till kraftverket. Turbintypen ska föreslås av tillverkaren och denna ska kunna garantera verkningsgrader och kavitationsmotstånd. Dränkbara turbiner ska övervägas då dessa kräver väsentligt mindre byggnationsarbeten. Inblandade i projektet ska ha rätt kunskaper och anbuden ska tas in som klumpsummor där visst ansvar tas för svårbestämda kostnader.</p>