Spelling suggestions: "subject:"alectron conergy loss dpectroscopy"" "subject:"alectron conergy loss espectroscopy""
31 |
Site occupancy determination of Eu/Y doped in Ca2SnO4 phosphor by electron channeling microanalysisYamane, H., Kawano, T., Tatsumi, K., Fujimichi, Y., Muto, S. 05 1900 (has links)
No description available.
|
32 |
Effect of Mg-doping on the degradation of LiNiO2-based cathode materials by combined spectroscopic methodsUkyo, Yoshio, Horibuchi, Kayo, Kondo, Hiroki, Oka, Hideaki, Kojima, Yuji, Tatsumi, Kazuyoshi, Muto, Shunsuke 05 1900 (has links)
No description available.
|
33 |
In-situ Environmental TEM Studies For Developing Structure-Activity Relationship in Supported Metal CatalystJanuary 2011 (has links)
abstract: In-situ environmental transmission electron microscopy (ETEM) is a powerful tool for following the evolution of supported metal nanoparticles under different reacting gas conditions at elevated temperatures. The ability to observe the events in real time under reacting gas conditions can provide significant information on the fundamental processes taking place in catalytic materials, from which the performance of the catalyst can be understood. The first part of this dissertation presents the application of in-situ ETEM studies in developing structure-activity relationship in supported metal nanoparticles. In-situ ETEM studies on nanostructures in parallel with ex-situ reactor studies of conversions and selectivities were performed for partial oxidation of methane (POM) to syngas (CO+H2) on Ni/SiO2, Ru/SiO2 and NiRu/SiO2 catalysts. During POM, the gas composition varies along the catalyst bed with increasing temperature. It is important to consider these variations in gas composition in order to design experiments for in-situ ETEM. In-situ ETEM experiments were performed under three different reacting gas conditions. First in the presence of H2, this represents the state of the fresh catalyst for the catalytic reaction. Later in the presence of CH4 and O2 in 2:1 ratio, this is the composition of the reacting gases for the POM reaction and this composition acts as an oxidizing environment. Finally in the presence of CH4, this is the reducing gas. Oxidation and reduction behavior of Ni, Ru and NiRu nanoparticles were followed in an in-situ ETEM under reacting gas conditions and the observations were correlated with the performance of the catalyst for POM. The later part of the dissertation presents a technique for determining the gas compositional analysis inside the in-situ ETEM using electron energy-loss spectroscopy. Techniques were developed to identify the gas composition using both inner-shell and low-loss spectroscopy of EELS. Using EELS, an "operando TEM" technique was successfully developed for detecting the gas phase catalysis inside the ETEM. Overall this research demonstrates the importance of in-situ ETEM studies in understanding the structure-activity relationship in supported-metal catalysts for heterogeneous catalysis application. / Dissertation/Thesis / Ph.D. Materials Science and Engineering 2011
|
34 |
Nanocaractérisation d'oxydes à changement de résistance pour les mémoires résistives / Nanocharacterization of resistance switching oxides for resistive memoriesCalka, Pauline 17 October 2012 (has links)
En raison de leur faible consommation d'énergie, les mémoires non volatiles (MNV) sont En raison de leur faible consommation d'énergie, les mémoires non-volatiles sont particulièrement intéressantes pour l'électronique portative (clé USB, téléphone, ordinateur portable …). Les mémoires Flash, qui dominent le marché, atteignent leurs limites physiques et doivent être remplacées. L'introduction de nouveaux matériaux et architectures mémoire est proposée. Les mémoires OxRRAM (Oxide Resistive Random Access Memory) sont des candidats potentiels. Il s'agit de structures M-O-M (Métal-Oxyde-Métal). Le stockage de l'information est basé sur la modulation de la résistance de l'oxyde à l'application d'un champ électrique ou d'un courant. Une meilleure compréhension du mécanisme de changement de résistance de ces dispositifs est nécessaire pour contrôler leurs performances. Nous nous intéressons au claquage diélectrique de l'oxyde, qui initie le mécanisme de changement de résistance. Les mesures physico-chimiques à l'échelle nanométrique sont indispensables à sa compréhension et font défaut dans la littérature. Dans cette thèse, nous proposons des mesures physico-chimiques, des mesures électriques et des méthodes de préparation d'échantillon adaptées. Les oxydes de nickel et d'hafnium sont investigués. En plus de la dégradation électrique (chute de résistance), les modifications de ces deux oxydes sont investiguées à trois niveaux : la composition chimique, la morphologie et la structure électronique. Mots-clés : mémoire résistive, mécanisme de changement de résistance, claquage diélectrique, NiO, HfO2, spectroscopie de photoélectrons, microscopie électronique en transmission, microscopie à forme atomique, lacunes d'oxygène. / With low energy consumption, non-volatile memories are interesting for portative applications (USB, mobile phone, laptop …). The Flash memory technology is reaching its physical boundaries and needs to be replaced. New materials and architectures are currently investigated. Oxide Resistive Random Access Memory (OxRRAM) is considered as a good candidate. It is based on a M-O-M (Metal-Oxide-Metal) stack. The information is stored using an electric field or a current that modulates the resistance of the oxide. A better understanding of the resistance switching mechanism is required in order to control the performances of the devices. We investigate the dielectric breakdown that activates the resistance switching properties. Physico-chemical characterization at the nanoscale is required. In this work, we propose proper physico-chemical and electrical measurements. Sample preparation is also considered. Nickel and hafnium oxide are investigated. Besides the evolution of the electrical properties, we analyze the oxide modification at three levels : the chemical composition, the morphology and the electronic structure. Keywords : resistive memory, resistance switching mechanism, dielectric breakdown, NiO, HfO2, photoelectron spectroscopy, electronic transmission microscopy, atomic force microscopy, oxygen vacancies.
|
35 |
Electronic structure of selected aromatic hydrocarbon systems investigated with electron energy-loss spectroscopyRoth, Friedrich 22 February 2013 (has links)
Organic materials with fascinating/intriguing electronic properties have been the driving force for many research activities in the past, and in particular for important progress in materials science covering both new functional materials as well as theoretical developments. In addition, charge transfer, i. e., the addition or removal of charges to or from molecules in organic solids is one route to modify and control their electronic properties. Recently, the discovery of superconductivity in several alkali metal intercalated hydrocarbon systems (picene, phenanthrene, coronene and 1,2;8,9-dibenzopentacene) with rather high transition temperatures has opened a new chapter in organic material science as well as solid-state physics.
The search for a microscopic understanding of the mechanism that drives materials superconducting always has initiated a large number of scientific activities, and there are numerous examples where these activities have provided major advancement. A basic foundation of this understanding is the knowledge of the electronic properties of the material under investigation.
In this context, this thesis reports first, very detailed insight into the electronic structure of both undoped as well as potassium doped picene, coronene and 1,2;8,9-dibenzopentacene using electron energy-loss spectroscopy (EELS) as main experimental method. Additionally, also photoemission spectroscopy experiments have been performed to investigate the occupied electronic density of states close to the chemical potential. In order to learn more about the electronic structure we have compared the results we obtained from EELS and photoemission spectroscopy with theoretical calculations based on Density functional theory (DFT) using the local-density approximation (LDA).
We identify the peculiar case of very close lying conduction bands that upon doping harbour the electrons that form the Cooper-pairs in the superconducting state. Moreover, the presented data display substantial changes in the electronic excitation spectrum upon doping, whereas in the doped case the appearance of one new peak (for picene) and several new peaks (for coronene and 1,2;8,9-dibenzopentacene) in the former optical gap is reported. By using a Kramers–Kronig analysis (KKA) it is possible to gain information about the nature of this doping introduced excitations. In particular, in case of picene, the new low energy feature can be assigned to a charge carrier plasmon. Interestingly, this plasmon disperses negatively upon increasing momentum transfer, which deviates significantly from the traditional picture of metals based on the homogeneous electron gas. The comparison with calculations of the loss function of potassium intercalated picene shows how this finding is the result of the competition between metallicity and electronic localization on the molecular units.
Furthermore, core level excitation measurements show the reduction of the lowest lying C 1s excitation feature, which clearly demonstrates that potassium intercalation leads to a filling of the conduction bands with electrons. Additionally, the measurements of potassium intercalated 1,2;8,9-dibenzopentacene clearly indicate the formation of particular doped phases with compositions K_xdibenzopentacene (x = 1, 2, 3), whereas the data suggest that K_1dibenzopentacene has an insulating ground state with an energy gap of about 0.9 eV, while K_2dibenzopentacene and K_3dibenzopentacene might well be metallic, because of the absent of an energy gap in the electronic excitation spectra.
Interestingly, a comparison of the photoemission as well as EELS spectra of undoped 1,2;8,9-dibenzopentacene and pentacene reveal that the electronic states close to the Fermi level and the electronic excitation spectra of the two materials are extremely similar, which is due to the fact, that the additional two benzene rings in 1,2;8,9-dibenzopentacene virtually do not contribute to the delocalized pi molecular orbitals close to the Fermi level. This close electronic similarity is in contrast to the behavior upon potassium doping, where evidence for a Mott state has been reported in the case of pentacene.
A comparison of the low energy excitation spectra of chrysene with picene (phenacenes) as well as tetracene with pentacene (acenes) crystals reveal a significant difference between the former and the latter two materials. While for the phenacenes (zigzag arrangement) the excitation onset is characterized by up to five weak excitation features with only small anisotropy and without visible Davydov splitting within the a*, b*-planes, the acene (linear arrangement) spectra are dominated by a large excitation close to the onset and a sizable Davydov splitting. The presented data show further that the spectral shape of the pentacene excitation spectrum provides clear evidence for a large admixture of molecular Frenkel-type excitons with charge-transfer excitations resulting in excited states with a significantly mixed character. This conclusion is in good agreement with recent advanced calculations which predicted a charge-transfer admixture to the lowest singlet excitation which is significantly dependent upon the length of the acene molecules. Moreover, also for picene and chrysene we observe differences which point towards an increased charge-transfer contribution to the singlet excitation spectrum in the former.
Finally, investigations of the electronic properties of undoped and potassium doped chrysene, a close relative of picene, show that the doping introduced changes are in a similar range such as observed in case of picene. Interestingly, due to the analogy between the observed changes in the electronic structure upon potassium doping between chrysene and picene and further similarity in the crystal structure we speculate that chrysene is a promising candidate for another aromatic hydrocabon superconductor.
|
36 |
High Resolution Characterization of Magnetic Materials for Spintronic ApplicationsEsser, Bryan David 18 September 2018 (has links)
No description available.
|
37 |
Transmission Electron Microscopy of 2D Materials : Structure and Surface PropertiesKarlsson, Linda January 2016 (has links)
During recent years, new types of materials have been discovered with unique properties. One family of such materials are two-dimensional materials, which include graphene and MXene. These materials are stronger, more flexible, and have higher conductivity than other materials. As such they are highly interesting for new applications, e.g. specialized in vivo drug delivery systems, hydrogen storage, or as replacements of common materials in e.g. batteries, bulletproof clothing, and sensors. The list of potential applications is long for these new materials. As these materials are almost entirely made up of surfaces, their properties are strongly influenced by interaction between their surfaces, as well as with molecules or adatoms attached to the surfaces (surface groups). This interaction can change the materials and their properties, and it is therefore imperative to understand the underlying mechanisms. Surface groups on two-dimensional materials can be studied by Transmission Electron Microscopy (TEM), where high energy electrons are transmitted through a sample and the resulting image is recorded. However, the high energy needed to get enough resolution to observe single atoms damages the sample and limits the type of materials which can be analyzed. Lowering the electron energy decreases the damage, but the image resolution at such conditions is severely limited by inherent imperfections (aberrations) in the TEM. During the last years, new TEM models have been developed which employ a low acceleration voltage together with aberration correction, enabling imaging at the atomic scale without damaging the samples. These aberration-corrected TEMs are important tools in understanding the structure and chemistry of two-dimensional materials. In this thesis the two-dimensional materials graphene and Ti3C2Tx MXene have been investigated by low-voltage, aberration-corrected (scanning) TEM. High temperature annealing of graphene covered by residues from the synthesis is studied, as well as the structure and surface groups on single and double Ti3C2Tx MXene. These results are important contributions to the understanding of this class of materials and how their properties can be controlled.
|
38 |
Mechanismen der Laserablation zur Synthese nanoskopischer KolloideSchaumberg, Christian Alexander 28 April 2016 (has links)
Die Synthese kolloidaler Nanopartikel ist daher eines der wichtigsten Forschungsthemen der letzten Jahre. Die gepulste Laserablation in Flüssigkeiten stellt eine Alternative zu den nasschemischen Synthesewegen dar. Merkmale der gepulsten Laserablation in Flüssigkeiten ist der geringe experimentelle Aufwand, die Vielseitigkeit und die Möglichkeit stabilisatorfreie kolloidale Nanopartikel herzustellen. Eine Weiterentwicklung ist die Verwendung von Pulversuspensionen als Ausgangsmaterial. Dies führt zu höheren Produktivitäten und neuen Materialien. Die zugrundeliegenden Prozesse sind allerdings komplex. Um diese Mechanismen aufzuklären, wurde ein chemischer Ansatz gewählt. Als Ausgangsmaterial wurden daher verschiedene Kupferverbindungen (Cu2C2, Cu5Si, Cu3N, Cu(N3)2, Cu3P, Cu2O, CuO, Cu2S, CuS und CuI) verwendet. Die hergestellten Nanopartikel wurden mit Hilfe der analytischen Transmissionselektronenmikroskopie charakterisiert. Dadurch konnten nachgewiesen werden, dass zwei Mechanismen an der Nanopartikelbildung beteiligt sind. Die Laserbestrahlung von Ausgangsmaterialien wie CuO und Cu3N führt zur Bildung von metallischen Kupfernanopartikeln. In dem dabei erzeugten Plasma nukleieren die Kupferatome zunächst zu kleinen primären Nanopartikeln. Diese Partikel koaleszieren anschließend und bilden größere sekundäre Partikel. Im Gegensatz zu dieser reduktiven Ablation, resultiert die Laserbestrahlung von CuI in der Fragmentierung des Materials. In diesem Fall wird kein Plasma erzeugt, sondern der induzierte thermische Stress führt zur Fragmentierung des Kristalls unter Beibehaltung der chemischen Zusammensetzung. Die Frage, welcher der beiden Mechanismen für ein bestimmtes Ausgangsmaterial dominiert, ist entscheidend für potentielle Anwendungen der Methode, da hiervon die chemische Zusammensetzung der erhaltenen Nanopartikel abhängt. Dies wird am Beispiel der Synthese von Bi2Te3 Nanopartikeln diskutiert, die in thermoelektrischen Elementen zur Anwendung kommen können. / The synthesis of colloidal nanoparticles has become a major topic in recent years. The pulsed laser ablation in liquids poses an alternative to the common wet-chemical approaches. Key features of the pulsed laser ablation in liquids are its simple setup, its versatility, and the possibility to generate surfactant-free colloidal nanoparticles. A further development of this technique is the use of suspended powders instead of bulk targets. This leads to higher productivities and even new materials. Although the generation of colloids by irradiating a suspension is straight forward, the underlying mechanisms of the size reduction from micrometer to nanometer sized particles appear to be quite complex. In order to reveal the mechanism a chemical approach was chosen. Hence, various copper compounds (Cu2C2, Cu5Si, Cu3N, Cu(N3)2, Cu3P, Cu2O, CuO, Cu2S, CuS and CuI) were used as a model system in order to investigate the impact of the leaving group on the ablation process. The generated nanoparticles were characterized with analytical transmission electron microscopy. These investigations clearly show that there are two distinct mechanisms involved in nanoparticle formation. The laser irradiation of precursors like CuO and Cu3N results in the formation of metallic copper nanoparticles. In the generated plasma copper atoms nucleate and form small primary particles. These particles later coalesce to larger secondary particles. In contrast to this reductive ablation, the irradiation of CuI follows a fragmentation mechanism. Here, the absorbed power of the laser beam does not produce a plasma but introduces thermal stress leading to fragmentation of the crystal while the chemical composition is preserved. The question which mechanism is predominant is of utmost importance as the chemical composition of the nanoparticles depends on the formation process. This is discussed on the example of the synthesis of Bi2Te3 nanoparticles, which can be used in thermoelectric applications.
|
39 |
Electron Spectroscopic Study of Indium Nitride LayersBhatta, Rudra Prasad 28 March 2008 (has links)
Surface structure, chemical composition, bonding configuration, film polarity, and electronic properties of InN layers grown by high pressure chemical vapor deposition (HPCVD) have been investigated. Sputtering at an angle of 50-70 degrees followed by atomic hydrogen cleaning (AHC) was successful in removing the carbon contaminants. AHC is found to be the most effective cleaning process to remove oxygen contaminants from InN layers in an ultrahigh vacuum (UHV) system and produced a well ordered surface. Auger electron spectroscopy (AES) confirmed the cleanliness of the surface, and low energy electron diffraction (LEED) yielded a 1×1 hexagonal pattern demonstrating a well-ordered surface. High resolution electron energy loss spectra (HREELS) taken from the InN layers exhibited loss features at 550 cm-1, 870 cm-1 and 3260 cm-1 which were assigned to Fuchs-Kliewer phonon, N-H bending, and N-H stretching vibrations, respectively. Assignments were confirmed by observation of isotopic shifts following atomic deuterium dosing. No In-H species were observed indicating N-termination of the surface and N-polarity of the film. Broad conduction band plasmon excitations were observed centered at 3100 cm-1 to 4200 cm-1 in HREEL spectra acquired with 25 eV electrons, for a variety of samples grown with different conditions. Infrared reflectance data shows a consistent result with HREELS for the bulk plasma frequency. The plasmon excitations are shifted about 300 cm-1 higher in HREEL spectra acquired using 7 eV electrons due to the higher plasma frequency and carrier concentration at the surface than in the bulk, demonstrating a surface electron accumulation. Hydrogen completely desorbed from the InN surface upon annealing for 900 s at 425 ºC or upon annealing for 30 s at 500 ºC. Fitting the coverage versus temperature for anneals of either 30 or 900 s indicated that the desorption was best described by second order desorption kinetics with an activation energy and pre-exponential factor of 1.3±0.2 eV and 10-7.3±1.0 cm2/s, respectively. Vibrational spectra acquired from HREEL can be utilized to explain the surface composition, chemical bonding and surface termination, and film polarity of InN layers. The explanation of evidence of surface electron accumulation and extraction of hydrogen desorption kinetic parameters can be performed by utilizing HREEL spectra.
|
40 |
Electron Energy-Loss Spectroscopy on Underdoped Cuprates and Transition-Metal DichalcogenidesSchuster, Roman 09 March 2010 (has links) (PDF)
Die vorliegende Arbeit befasst sich mit
Elektronenenergieverlustspektroskopie an unterdotierten Kupratsupraleitern und Übergangsmetalldichalcogeniden. Nach einem kurzen Abriss über die der experimentellen Methode zugrundeliegenden theoretischen Tatsachen folgen zwei experimentelle Kapitel. Für das prototypische Kupratsystem
Ca2-xNaxCuO2Cl2 wird für verschiedene Dotierungskonzentrationen zunächst die Entwicklung der Ladungstransferanregungen untersucht. Man findet eine substanzielle Umverteilung des spektralen Gewichtes, verbunden mit einem starken Einbruch der Dispersion dieser Anregungen. Beides wird im Rahmen der Wechselwirkung mit Spinfreiheitsgraden innerhalb der Kupfer-Sauerstoff-Ebene diskutiert. Anschliessend erfolgt die Diskussion einer ausschließlich für zehnprozentige Dotierung auftretenden Symmetriebrechung der optischen Antwortfunktion, für die verschiedene mögliche Szenarien vorgeschlagen werden. Im Kapitel über die Dichalcogenide liegt der Fokus auf dem Verhalten des Ladungsträgerplasmons, das für alle Substanzen dieser Gruppe mit Ladungsordnung eine negative Dispersion aufweist. Dieses Verhalten läßt sich durch in-situ Interkalation zusätzlicher Ladungstraeger umkehren, so dass man eine dotierungsabhängige Plasmonendispersion erhält. Es werden verschiedene Szenarien für dieses Verhalten diskutiert. / The present thesis describes electron energy-loss spectroscopy on underdoped cuprate superconductors and transition-metal dichalcogenides.
After a brief introduction into the experimental method there are two experimental chapters. For the prototype cuprate system Ca2-xNaxCuO2Cl2 the behavior of the charge-transfer excitations is investigated as a function of doping. The observed substantial redistribution of spectral weight and the accompanying breakdown of their dispersion is discussed in terms of a coupling to the spin degrees of freedom within the copper-oxygen plane. For x=0.1 there is a pronounced symmetry breaking in the optical response function which is discussed in terms of different possible scenarios. The chapter on the dichalcogenides focuses on the properties of the charge-carrier plasmon which shows a negative dispersion for all representatives of this family exhibiting a charge-density wave instability. This behavior can be influenced by in-situ intercalation of additional charges, the result being a doping dependent plasmon dispersion. Several approaches to reconcile these findings are considered.
|
Page generated in 0.0816 seconds