Tourism is something that today is very common for most parts of the world. Tourism effects is a phenomenon that focuses on the effects of tourism which can affect destinations and residents in different ways. The most common are social, cultural, environmental and economic impacts. The purpose of this bachelor thesis has been to explore if there are any tourism effects and if so, what are they and in what ways can they affect a small rural area as a destination and the effect on the residents. For this purpose we have used an area called Glasriket in Sweden as an example. This study has used both qualitative and quantitative data with a deductive approach. After conducting our research, we then composed a questionnaire. The questionnaire was shared on our personal Facebook pages and also sent out through email to businesses, organizations and municipalities in Glasriket. In total, the empirical data was collected from 74 respondents. The results of the study showed that tourism is often perceived as positive. The positive effects of tourism outweigh the negative. It is clear that tourism has impacts on destinations in rural areas and not only on major cities or coastal areas. One conclusion is that yes, there are effects caused by tourism in Glasriket. There are several environmental, social, cultural and economic impacts in this area. It can also be concluded that tourism affects people and destinations in different ways and the ways the effects are perceived by residents might vary depending on factors such as cultural background, economic status and personal opinions.

La fatigue induite par chargement cyclique est un mode d'endommagement majeur des métaux. Elle se caractérise par des effets environnementaux et de grandes dispersions de la durée de vie qui doivent être mieux comprises. Les matériaux analysés sont de type cfc : aluminium, cuivre, nickel et argent. Le comportement de marches naturellement créées en surface par le glissement cyclique de dislocations est examiné par simulations en dynamique moléculaire sous vide et sous environnement oxygène pour le cuivre et le nickel. Un phénomène de reconstruction est observé sur les marches en surface, qui peut induire une forte irréversibilité. Trois mécanismes de reconstruction des marches apparues en surface sont observés et décrits. L’irréversibilité de ces marches est ensuite analysé. Elles sont irréversibles pour des chargements expérimentaux, sauf arrivée de dislocations de signe opposé sur un plan de glissement directement voisin.Avec arrivée de dislocations sur des plans non voisins, l'irréversibilité s’accumule cycle par cycle et il est possible de reproduire l’apparition de fissures en surface dont la profondeur augmente graduellement.Un environnement oxygène modifie la surface (début d’oxydation) mais pas l’irréversibilité parce que l’oxygène n’a pas d'influence majeure sur les différents mécanismes liés à l’évolution du relief.Une estimation grossière de l'irréversibilité est faite pour des dislocations coin pures dans une bande de glissement persistante pour les matériaux dits ondulés. On obtient un facteur d’irréversibilité entre 0,5 et 0,75 pour le cuivre, sous vide et sous l’environnement oxygène, en accord avec des mesures récentes en microscopie à force atomique.La propagation de fissures est simulée en environnement inerte. Les fissures peuvent se propager à cause de l'irréversibilité des dislocations générées, liée à leurs interactions allant jusqu’à la création de jonctions. / Fatigue is one of the major damage mechanisms of metals. It is characterized by strong environmental effects and wide lifetime dispersions which must be better understood. Different face centred cubic metals, Al, Cu, Ni, and Ag are analyzed. The mechanical behaviour of surface steps naturally created by the glide of dislocations subjected to cyclic loading is examined using molecular dynamics simulations in vacuum and in air for Cu and Ni. An atomistic reconstruction phenomenon is observed at these surface steps which can induce strong irreversibility. Three different mechanisms of reconstruction are defined. Surface slip irreversibility under cyclic loading is analyzed. All surface steps are intrinsically irreversible under usual fatigue laboratory loading amplitude without the arrival of opposite sign dislocations on direct neighbor plane.With opposite sign dislocations on non direct neighbour planes, irreversibility cumulates cycle by cycle and a micro-notch is produced whose depth gradually increases.Oxygen environment affects the surface (first stage of oxidation) but does not lead to higher irreversibility as it has no major influence on the different mechanisms linked to surface relief evolution.A rough estimation of surface irreversibility is carried out for pure edge dislocations in persistent slip bands in so-called wavy materials. It gives an irreversibility fraction between 0.5 and 0.75 in copper in vacuum and in air, in agreement with recent atomic force microscopy measurements.Crack propagation mechanisms are simulated in inert environment. Cracks can propagate owing to the irreversibility of generated dislocations because of their mutual interactions up to the formation of dislocation junctions.

La présence de taureaux sub-fertiles sur le marché de l’Insémination Animale (IA) influence négativement l’efficacité des élevages. L’évaluation de la fertilité des taureaux, basée sur l’analyse combinée de marqueurs génétiques, morphologiques, cinétiques et métaboliques de la semence, n’est pas suffisante pour identifier les taureaux sub-fertiles avant leur entrée en production. Cela suggère l’implication d’autres facteurs, notamment d’origines épigénétiques. Parmi les marques épigénétiques, la méthylation de l’ADN tient une place essentielle : son remaniement est en effet indispensable aux processus fondamentaux que sont la différenciation des cellules germinales, la spermatogénèse et le développement embryonnaire précoce. Alors que chez l’Homme, de nombreuses études ont montré que des altérations des profils de méthylation spermatiques sont associées à la sub-fertilité, très peu de données existent chez le bovin. L’objectif de ce travail de thèse est la caractérisation du méthylome de la semence bovine et l’identification de nouveaux marqueurs fiables de la fertilité mâle à un stade précoce. Cette étude s’inscrit dans un large projet intitulé SeQuaMol (pour « Qualité Moléculaire de la Semence »), mis en place au sein d’un laboratoire commun entre l’INRA et la fédération ALLICE. La caractérisation du méthylome spermatique bovin a été réalisée en utilisant une approche multi-échelle (globale, pangénomique et séquence-spécifique). Les analyses ont permis de révéler l’hypométhylation très marquée du spermatozoïde bovin. L’hypométhylation affecte des gènes importants pour la différenciation de la lignée germinale, les fonctions spermatiques, ainsi que des séquences satellites. L’identification de biomarqueurs de la fertilité a été réalisée en utilisant une approche pangénomique (Reduced Representation Bisulfite Sequencing, RRBS). L’analyse a été effectuée sur une cohorte de 94 taureaux, dont les individus de races Holstein et Montbéliard ont été catégorisés en fonction de l’adéquation entre un indicateur génétique de la fertilité et leur fertilité réelle. Le dispositif inclus également des taureaux de 4 autres races pour obtenir une estimation de la variabilité épigénétique liée à la race. Cette analyse a nécessité l’optimisation et l’automatisation du protocole pour la préparation des banques RRBS à haut-débit, ainsi que la mise au point de l’ensemble de la procédure de traitement bio-informatique et statistique des données. Plusieurs milliers de biomarqueurs de la fertilité ont été identifiés et permettent de prédire de façon robuste le statut de fertilité. De plus, une démarche d’intégration des données de génotype et d’épigénotype a été amorcée, soulignant les interactions potentielles en ces strates d’informations. Enfin, nous avons mis en évidence l’influence de l’âge à la production de semence sur le méthylome. L’ensemble de ces données souligne que les modifications du méthylome spermatique peuvent affecter des gènes impliqués dans les processus précoces et plus tardifs du développement, ainsi que quelques voies du fonctionnement du spermatozoïde. L’ensemble des biomarqueurs identifiés serviront de base à la poursuite du projet SeQuaMol, dont l’aboutissement sera le développement d’outils technologiques et statistiques pouvant être utilisés en routine pour améliorer la prédiction de la fertilité mâle. / The presence of subfertile bulls in the market of Animal Insemination negatively influences the efficacy of breeding farms. The evaluation of bull fertility, based on the combined analysis of genetic, morphological, kinetic and metabolic markers of the semen, is not sufficient to identify subfertile bulls before entering semen production. It suggests the implication of other factors, especially epigenetic ones. Within the epigenetic markers, DNA methylation holds a crucial position: indeed, its reprogramming is indispensable to the fundamental processes that are germinal cell differentiation, spermatogenesis and the embryonic development. Whereas several studies have showed that the alteration of spermatic methylation profiles are associated with subfertility in humans, only a little data exists concerning bovines. The aim of this thesis is the characterization of the methylome of bovine semen and the identification of new reliable markers of male fertility at an early stage. This study is part of a larger project called SeQuaMol (Molecular Quality of Semen) which rely on a common laboratory between INRA and the ALLICE federation. The characterization of the bovine sperm methylome was achieved by using a multiscale approach (global, pangenomic and sequencespecific). The analyses made it possible to observe the hypomethylation of the bovine semen. Hypomethylation affects genes that are crucial for the differentiation of the germline, spermatic functions, and also on satellite sequences.The identification fertility biomarkers was carried out by using a pangenomic approach (Reduced Representation Bisulfite Sequencing, RRBS). The analysis has been performed on a cohort of 94 bulls, including subjects of the Holstein race and Montbeliard race, categorized according to the adequacy between a genetic indicator of fertility and their actual fertility. The process also includes bulls from 4 other breeds in order to obtain an estimate of the genetic variability linked to the breed. This analysis has required the optimization and the automation of the protocol for the high throughput preparation of RRBS libraries, as well as the development of the whole bioinformatic pipeline and data statistics. Several thousands of biomarkers of fertility have been identified, which allow to predict in a robust way the fertility status. Furthermore, a process of integration of genotype and epigenotype data has been started, which underlines the potential interaction between these levels of information. Finally, we have highlighted the influence of the age of semen production on the methylome. Altogether, theses data suggest that modifications of the semen methylome can affect genes that are involved in the process of early and late embryo development, and parts of the functioning of the sperm cell. The biomarkers identified will form a basis for the pursuit of the SeQuaMol project, of which the completion will be the development of technological and statistical tools that may be used routinely to improve male’s fertility prediction.

In agriculture-dominated areas, water pollution resulting from nutrients migrating from farms to water bodies is a major concern. The migration is further exacerbated by traditional tile drain known as Uncontrolled Tile Drainage (UCTD), which removes excess water from areas to keep the water table low enough for crops to grow. UCTD, commonly used in Ontario, Canada, is believed to contribute to water quality issues, whereas Controlled Tile Drainage (CTD) is an alternative technique in which a structure controls the outlets of the drains so that water only leaves a field when the water table level exceeds a desired threshold. Considered as a Best Management Practice (BMP), CTD has been documented as an efficient practice preventing nutrients from migrating out of agricultural fields. This thesis aims to improve our understanding of the environmental benefits of replacing UCTD with CTD. Three significant contributions were achieved. The first contribution of the thesis is the improvements of the algorithm for calculating nitrates in tile flows in the Soil and Water Assessment Tool (SWAT) model. Researchers have simulated CTD by dynamically changing tile depth to mimic the operation of outlet structure gates, but it has been demonstrated that doing so results in inaccuracies, and so the algorithm in the model has been improved subsequently. The current author proposed and tested a new algorithm for calculating nitrates in tile flows that better represents the dynamics of water and nutrients in soil layers for the SWAT model. A model for the South Nation watershed, located in Ontario, Canada, was then developed and successfully calibrated using the improved SWAT model. The second contribution was the extension of the SWAT model to simulate riverine hydraulic and water quality processes by coupling it with the QUAL2Kw model. In this thesis, a procedure is developed to couple the SWAT model and the QUAL2Kw model to enable continuous simulations of 13 water quality parameters in the South Nation River system. The coupled model was calibrated and verified at various observed locations along the river during the five seasons of growth from 2006 to 2010. The simulation results suggested that CTD also improved the water quality of the river by lowering biologically available N levels of NO2--N, and NO3--N, thereby impeding phytoplankton growth in the river. The third contribution is the verification of the benefits of replacing UCTD with CTD in the future climates. The confirmation was done using the SWAT model alone, and then the coupled SWAT/QUAL2K models, using a matrix of climate change experiments performed with several Global Climate Models and Regional Climate Models. The results suggest that nutrient loading from the watershed will increase in the 2021–2050 period compared to the 1985–2006 period. Thus, pollution from agricultural fields will worsen with the current UCTD approach, while the results also show that CTD would perform effectively and stably in future climate scenarios and could counterbalance the effects of climate change on water quality. To the author’s knowledge, this study is the first attempt to date to assess the environmental effects of CTD on a watershed and river by coupling the SWAT and QUAL2Kw models. The findings expand the current scope of knowledge on the environmental effects of CTD on watersheds and rivers under current and future climate change regimes. Long periods of continuous simulation and a matrix of climate change scenarios also make this study stand out from other studies. It laid a foundation for future investigations.

With increased climate goals, higher demands are placed on the construction industry to reduce emissions, making it important to develop alternatives that are economically and environmentally sustainable. Concrete is one of the most widely used materials and has high CO2-emissions, with cement production accounting for 90% of these emissions. Therefore various types of green concrete have been developed, where one of the alternative binders approved according to Swedish standards is ground granulated blast furnace slag (GGBS). The impact of GGBS in concrete is well documented and researched, with known advantages and disadvantages of using green concrete. The aim has been to gather relevant data of how GGBS affects the concrete performance and durability. The results show that there are tsignificant effects when using slag concrete, with GGBS providing good resistance against chemical attacks and achieving higher strength. However, there are questions regarding how sustainable GGBS actually is, especially considering how the steel industry is evolving and moving from blast furnaces to fossil free steel production in electric arc furnaces. Nevertheless, GGBS is of utmost relevance for climate improvement within the construction industry. Where the transition within the steel and construction industries opens up opportunities for the development of innovative technologies and new binders to minimize the climate footprint of cement production, thereby paving the way for a sustainable future. / Med ökade klimatmål ställs högre krav på byggindustrin att minska utsläppen, varav det är av vikt att utveckla alternativ som är ekonomiskt och miljömässigt hållbara. Betong som är ett av de mest använda materialen har höga CO2-utsläpp, där tillverkningen av cement står för 90% av utsläppen. Därför har det utvecklats olika typer av klimatförbättrad betong, där ett av de alternativa bindemedlen som är godkänt enligt svenska standarder är masugnsslagg. Slaggens inverkan på betong är väldokumenterad och undersökt, där man vet att det finns fördelar och nackdelar med att använda en klimatförbättrad betong. Syftet har varit att ta fram relevant data om hur masugnsslagg påverkar betongen prestandan och hållbarhet. Där resultatet visar att det finns påtagliga effekter med att använda slaggbetong, där slaggen ger en god beständighet mot kemiska angrepp och kan uppnå högre hållfasthet. Det existerar dock frågetecken hur hållbar masugnslaggen är, detta med avseende på hur stålindustrin utvecklar sig och kommer gå från masugnar till fossilfri ståltillverkning i ljusbågsugnar. I dagsläget är dock masugnslaggen av högsta relevans för klimatförbättringen inom byggindustrin. Där omställningen inom stål- och byggindustrin öppnar upp för utvecklingen av innovativa tekniker och nya bindemedel för att kunna minimera klimatavtrycket från cementproduktionen, och därmed bana väg för en hållbar framtid.

<p>This thesis conceives aquaculture as a transfer of resources within and between different parts of the world system. It is argued that due to inappropriate human-nature interactions, resources tend to flow from the South to the North, as a process of coastal colonisation. To study this resource transfer, coastal aquaculture is ap-proached from a transdisciplinary perspective, integrating natural, social, economic and spatial aspects. By combining world system theory and general systems theory, a systems view is adopted to relate aquaculture to forces of global capitalism, and analyse interactions between social and ecological processes at local and global levels. Emergy (energy memory) synthesis and participatory research methodologies were applied to two cases of aquaculture in Sri Lanka and the Philippines; monocul-ture of the black tiger prawn (Penaeus monodon) and milkfish (Chanos chanos), and polyculture of the two species together with mudcrab (Scylla serrata). The study reveals that semi-intensive shrimp monoculture in Sri Lanka generates few benefits for poor local people, and depends much on external inputs such as fry, feed and fuels, which implies negative environmental effects at local as well as global levels. Extensive polyculture in the Philippines involves more local people, and implies lower dependence on external inputs. Still, since benefits accrue mostly to elites, and mangroves are negatively affected, neither case is viable for sustainable poverty alleviation. Nevertheless, the study offers several insights into how sustainability assessment may be more transdisciplinary, and points to several factors affecting sustainability and fairness in aquaculture; the most important being mangrove con-version, local people involvement, and dependence on external inputs. Given that mangrove conversion is counteracted, extensive polyculture practices may also prove more viable in times of decreasing resources availability, and if policies are developed that favour resource efficient polyculture, and local small-scale and re-source poor farmers, instead of the global North.</p>

This thesis conceives aquaculture as a transfer of resources within and between different parts of the world system. It is argued that due to inappropriate human-nature interactions, resources tend to flow from the South to the North, as a process of coastal colonisation. To study this resource transfer, coastal aquaculture is ap-proached from a transdisciplinary perspective, integrating natural, social, economic and spatial aspects. By combining world system theory and general systems theory, a systems view is adopted to relate aquaculture to forces of global capitalism, and analyse interactions between social and ecological processes at local and global levels. Emergy (energy memory) synthesis and participatory research methodologies were applied to two cases of aquaculture in Sri Lanka and the Philippines; monocul-ture of the black tiger prawn (Penaeus monodon) and milkfish (Chanos chanos), and polyculture of the two species together with mudcrab (Scylla serrata). The study reveals that semi-intensive shrimp monoculture in Sri Lanka generates few benefits for poor local people, and depends much on external inputs such as fry, feed and fuels, which implies negative environmental effects at local as well as global levels. Extensive polyculture in the Philippines involves more local people, and implies lower dependence on external inputs. Still, since benefits accrue mostly to elites, and mangroves are negatively affected, neither case is viable for sustainable poverty alleviation. Nevertheless, the study offers several insights into how sustainability assessment may be more transdisciplinary, and points to several factors affecting sustainability and fairness in aquaculture; the most important being mangrove con-version, local people involvement, and dependence on external inputs. Given that mangrove conversion is counteracted, extensive polyculture practices may also prove more viable in times of decreasing resources availability, and if policies are developed that favour resource efficient polyculture, and local small-scale and re-source poor farmers, instead of the global North.

Approximately 2000 daily aerosol samples were collected at Antalya (30&deg / 34&amp / #900 / 30.54 E, 36&deg / 47&amp / #8217 / 30.54N) on the Mediterranean coast of Turkey between 1993 and 2001. High volume PM10 sampler was used for the collection of samples on Whatman&amp / #8211 / 41 filters. Collected samples were analyzed by a combination of analytical techniques. Energy Dispersive X-Ray Fluorescence (EDXRF) and Inductively Coupled Plasma Mass Spectrometry (ICPMS) was used to measure trace element content of the collected samples from Li to U. Major ions, namely, SO42- and NO3-, were determined by employing Ion Chromatography (IC). Samples were analyzed in terms of their NH4+ contents by means of Colorimetry. Evaluation of short term trends of measured parameters have been shown that elements with marine and crustal origin are more episodic as compared to anthropogenic ones. Most of the parameters showed well defined seasonal cycles, for example, concentrations of crustal elements increased in summer season while winter concentrations of marine elements were considerably higher than associated values for summer. Seasonal Kendall statistic depicted that there was a decreasing trend for crustal elements such as Be, Co, Al, Na, Mg, K, Dy, Ho, Tm, Cs and Eu. Lead, As, Se and Ge were the anhtropogenic elements that decreasing trend was detected in the course of study period. Cluster and Residence time analysis were performed to find the origin of air masses arrving to Eastern Mediterranena Basin. It has been found that air masses reaching to our station resided more on Balkans and Eastern Europe. Positive Matrix Factorization (PMF) resolved eight factors influencing the chemical composition of Eastern Mediterranean aerosols as local dust, Saharan dust, oil combustion, coal combustion, crustal-anthropogenic mixed, sea salt, motor vehicle emission, and local Sb factor.

From the Proceedings of the 1978 Meetings of the Arizona Section - American Water Resources Assn. and the Hydrology Section - Arizona Academy of Science - April 14-15, 1978, Flagstaff, Arizona / Discontinuous water quality data for the San Pedro River in southeastern Arizona is analyzed to illustrate the nature of water quality problems of ephemeral flow. The San Pedro drains a northerly-trending basin of 4,483 square miles, of which 696 are in Mexico and 3,787 in Arizona. Several questions arise in the consideration of a rational management plan: what is the necessity for protection of ephemeral flow quality when the channel consists of a dry wash much of the year, where there is little aquatic or wildlife to protect, and where occasional flow during flood conditions is put to little use by humans; and where and how do we use the ephemeral flow it is indeed decided to utilize it. Such questions as these form the basis of this discussion in an effort to bring out the point that water quality problems of ephemeral flow in arid areas differ from those in the humid zone. It is argued that in between the extremes of prohibiting or treating all runoff or eliminating all sources of pollution, there is actually little that can be done to control all sources of pollution in this typical arid stream, despite the fact that standards, for the most part unattainable, have been set for this flow.

From the Proceedings of the 1978 Meetings of the Arizona Section - American Water Resources Assn. and the Hydrology Section - Arizona Academy of Science - April 14-15, 1978, Flagstaff, Arizona / Water shortages in the Western United States have intensified the search for new sources. Wastewater reuse is being increasingly called upon to augment existing supplies. One potential impediment to the continued expansion of wastewater reuse efforts is the accumulation of toxic heavy metals and other salts in the recycled water. Conventional and advanced wastewater treatment effect the removal of a portion of the heavy metals added during use. Removal is by chemical precipitation and adsorption and disposed of with the sludges. Potential uses of treated wastewater effluents include irrigation and groundwater recharge. Care must be taken to prevent contamination of groundwater, especially since existing wells have been reported to have concentrations of heavy metals in excess of drinking water standards. Percolation of wastewaters through soils (especially fine soils) results in a reduction in heavy metal concentrations. It is postulated that removal of these metals is by a combination of chemical precipitation with filtration of the precipitates, and adsorption on soil particles (thus the effectiveness of fine soils). Long term saturation of the soils with heavy metals may result in a "breakthrough" contamination of the groundwater. A predictive model of heavy metal-wastewater-soil interactions is proposed to aid in the design and regulation of wastewater reuse systems to eliminate or minimize this problem.