In the present thesis the density functional B3LYP has been used to study reactions of NO and O2 in redox active enzymes. Reduction of nitric oxide (NO) to nitrous oxide (N2O) is an important part in the bacterial energy conservation (denitrification). The reduction of NO in three different bimetallic active sites leads to the formation of hyponitrous acid anhydride (N2O22-). The stability of this intermediate is crucial for the reaction rate. In the two diiron systems, respiratory and scavenging types of NOR, it is possible to cleave the N-O bond, forming N2O, without any extra protons or electrons. In a heme-copper oxidase, on the other hand, both a proton and an electron are needed to form N2O. In addition to being an intermediate in the denitrification, NO is a toxic agent. Myoglobin in the oxy-form reacts with NO forming nitrate (NO3 -) at a high rate, which should make this enzyme an efficient NO scavenger. Peroxynitrite (ONOO-) is formed as a short-lived intermediate and isomerizes to nitrate through a radical reaction. In the mechanism for pumping protons in cytochrome oxidase, thermodynamics, rather than structural changes, might guide protons to the heme propionate for further translocation. The dioxygenation of arachidonic acid in prostaglandin endoperoxide H synthase forms the bicyclic prostaglandin G2, through a cascade of radical reactions. The mechanism proposed by Hamberg and Samuelsson is energetically feasible.

This thesis is divided into three parts, revolving around the developments of dynamic systems utilized in dynamic kinetic resolution (DKR) and constitutional dynamic chemistry (CDC). The first section gives an introduction to constitutional dynamics, the core concept of this thesis. Constitutional dynamics can be tuned through reversible interactions. Then, the basic principles of constitutional dynamics in DKR and CDC are discussed, along with their applications. The second section explores the asymmetric synthesis of oxazolidinone derivatives using lipase catalysis through kinetic resolution (KR) and dynamic kinetic resolution. In the first example, synthetic protocol to enantioenriched 5-phenyloxazolidin-2-ones is described, where a kinetically controlled carbamation is followed by lipase-catalyzed cyclization. In contrast to the 5-substituted species, the synthesis of 3-phenyloxazolidin-2-one derivatives could be achieved through lipase-catalyzed cascade O- and N- alkoxycarbonylations in one pot. Furthermore, this KR system could be coupled to a ruthenium-catalyzed racemization process of 1,2-aminoalcohols, thus providing an efficient DKR methodology for asymmetric transformations. The third section focuses on dynamic systems built through reversible covalent reactions. In the first example, a selective gelation process is described, and employed to resolve dynamic imine systems consisting of gelator candidates.  In the second example, reversible reactions with aldehyde enamines are presented, including enamine formation and exchange reactions. In particular, Bi(III) and Sc(III) were discovered to accelerate the enamine exchange reactions by 50-400 times, in which the equilibria could be reached within hours. The last example describes reversible nitroaldol reactions in aqueous media, where rapid and efficient equilibration was identified for selected structures in neutral phosphate buffer. / <p>QC 20150911</p>

A busca por materiais derivados de fontes renováveis e com características como biocompatibilidade e biodegradabilidade tem crescido significativamente nos últimos anos. A utilização de enzimas na polimerização representa um grande passo para a obtenção destes, visto que possibilitam a produção de polímeros evitando a utilização de catalisadores tóxicos e, assim, melhorando sua biocompatibilidade. O presente trabalho descreve a utilização de monômeros funcionais derivados de fontes renováveis na produção de poliésteres hidrolisáveis via catálise enzimática. As sínteses de polímeros produzidos a partir de isosorbídeo e ácidos dicarboxílicos ou derivados - como seus ésteres alquílicos e vinílicos - foram feitas utilizando a lipase de Candida antarctica Fração B como catalisador. As polimerizações foram realizadas por policondensações em massa e em solução, utilizando-se diferentes solventes e diferentes técnicas para remoção de subprodutos de reação. A principal abordagem foi o estudo das diferentes condições reacionais realizadas, variando-se o tempo de reação, tipo do monômero, solvente utilizado (se for o caso) e tipo de técnica para remoção de subprodutos visando o aumento da massa molar dos polímeros. A condição que forneceu os materiais com maiores massas molares foi a policondensação em solução, utilizando a mistura cicloexano:benzeno como solvente. Tendo por objetivo investigar profundamente a condição ótima obtida, e estabelecer padrões de comparação com outros sistemas, foram estudados, nessa condição, parâmetros como tempo de reação, efeito do tamanho da cadeia carbônica do monômero, grupo de saída, solubilidade dos polímeros e diluição do sistema. Os materiais obtidos foram caracterizados por cromatografia por exclusão de tamanho (SEC), termogravimetria (TG), calorimetria exploratória diferencial (DSC), espectroscopia no infravermelho, difração de raios-X, e Ressonância Magnética Nuclear (RMN) de 1H e 13C. Através deste trabalho foi provado que, embora apresente uma cinética de reação lenta, a polimerização enzimática deste diol secundário estericamente impedido é possível, fornecendo poliésteres com massas molares similares às obtidas via catálise química. Todos os resultados obtidos neste trabalho são inéditos no que diz respeito à polimerização enzimática de dióis secundários impedidos, mais especificamente de isosorbídeo. / The search for materials derived from renewable sources, with characteristics such as biocompatibility and biodegradability has grown significantly in recent years. The use of enzymes in the polymerization is a major step for the attainment of these materials, since it allows the production of polymers while avoiding the use of toxic catalysts and thus improving its biocompatibility. This paper describes the use of functional monomers derived from renewable sources in the production of hydrolysable polyesters by enzyme catalysis The synthesis and characterization of polymers derived from isosorbide and dicarboxilic acids or derivatives - such as alkyl and vinyl esters - were carried out using the lipase from Candida antarctica - Fraction B as catalyst. The polymerizations were accomplished by polycondensations in bulk and in solution, using different solvents and different techniques for removal of reaction byproducts. The main approach was to study the different reaction conditions, by varying the reaction time, monomer type, solvent used (if applicable) and the type of technique for removal of byproducts, aiming at maximizing polymer molar mass. The condition that provided the material with higher molecular weight was the solution step-growth polymerization, using a mixture cyclohexane:benzene as solvents. Aiming to thoroughly investigate the optimum condition obtained, and to establish standards for comparison with other systems, it was studied, in this condition, parameters such as reaction time, effect of monomer carbon chain length , leaving group, polymers solubility of and dilution of the reaction system. The materials were characterized by gel permeation chromatography (SEC), thermogravimetry (TG), differential scanning calorimetry (DSC), infrared spectroscopy, X-ray diffraction and 1H and 13C Nuclear Magnetic Resonance (NMR). Through this work it was proved that, in spite of a slow reaction kinetics, the enzymatic polymerization of this hindered secondary diol is possible, providing polyester with molecular weight similar to those obtained by chemical catalysis. All results obtained in this work are unprecedented with respect to the enzymatic polymerization of hindered secondary diols, more specifically of Isosorbide.

No description available.

The asymmetric reduction of ketones to chiral hydroxyl compounds by alcohol dehydrogenases (ADHs) is an established strategy for the provision of valuable precursors for fine chemicals and pharmaceutics. However, most ADHs favor linear aliphatic and aromatic carbonyl compounds, and suitable biocatalysts with preference for cyclic ketones and diketones are still scarce. Among the few candidates, the alcohol dehydrogenase from Thauera aromatica (ThaADH) stands out with a high activity for the reduction of the cyclic α-diketone 1,2-cyclohexanedione to the corresponding α-hydroxy ketone. This study elucidates catalytic and structural features of the enzyme. ThaADH showed a remarkable thermal and pH stability as well as stability in the presence of polar solvents. A thorough description of the substrate scope combined with the resolution and description of the crystal structure, demonstrated a strong preference of ThaADH for cyclic α-substituted cyclohexanones, and indicated structural determinants responsible for the unique substrate acceptance.

No description available.

The thesis involves computer simulation and theoretical studies of phase transition in soft-condensed matter systems and theoretical understanding of enzyme kinetics along with kinetic proofreading of tRNA-aminoacylation in biological systems. Based on the system and phenomena of interest, the work has be classified into the following four major parts: I. Surface phenomena and surface energy of vapor-liquid interface. II. Condensation of vapor in two and three dimensions. III. Liquid-solid phase transition in polydisperse systems. IV. Enzyme catalysis and kinetic proofreading in biosynthesis. Above mentioned four parts have further been divided into thirteen chapters. In the following we provide a brief chapter-wise outline of the thesis. Part I deals with surface tension and interfacial properties of vapor-liquid interface for Lennard-Jones (LJ) fluid in both two and three dimensions. In Chapter 1, we provide a brief overview of vapor-liquid interface and existing theoretical and computer simulation studies of surface/line tension. In this chapter we also discuss about the existing experimental studies. In Chapter 2, we present computer simulation studies of surface tension in two dimensional Lennard-Jones system. The sensitivity of line tension on range (potential cut-off) of interparticle interaction is discussed in this chapter. We present Density Functional Theory (DFT) of line tension of vapor-liquid interface based on Weeks-Chandler-Anderson (WCA) and Barker-Hendersen (BH) perturbation techniques. We compare the DFT prediction with the computer simulation results. In general, WCA approach has been found to be successful for 3D system in predicting the surface tension. In 2D, however, it does not give good agreement either for phase diagram or for the line tension. In fact, BH also does not give accurate values of the coexistence parameters, however, it predicts better line tension compared to WCA. In Chapter 3 we present both theoretical and computer simulation studies of gas-liquid surface tension for three dimensional Lennard-Jones fluid. We perform non-equilibrium computer simulation study following Transition Matrix Monte Carlo (TMMC) method to obtain surface tension for various ranges of potential and introduce a new scaling relation of surface tension in order to capture both the temperature and interparticle interaction range dependence. The scaling shows excellent agreement with the simulation result and it can also predict the critical temperature with sufficient accuracy. The width of the gas-liquid interface is found to be insensitive to the range of the potential, whereas the density separation of the bulk vapor and liquid phases increases with increasing range of potential. Thus, the major contribution comes from the increasing density separation of the bulk vapor and liquid phases. Part II consists of four chapters, where we focus on the age old problem of nucleation, from the perspective of thermodynamics and kinetics. We account for the rich history of the problem in the introductory Chapter 4. In this chapter we describe various types and examples of the nucleation phenomena, and a brief account of the major theoretical approaches used so far. We begin with the most successful Classical Nucleation Theory (CNT), and then move on to more recent applications of Density Functional Theory (DFT) and other mean-field types of models. We present various experimental techniques used in the literature to obtain rate of nucleation. We conclude with a comparison between the experiments, theories and computational studies. In the next chapter (Chapter 5) we attempt to understand the mechanism of the gas-liquid nucleation in three dimension at large metastability from microscopic point of view. Here we study the nature of sequential growth of all liquid-like clusters (not just the largest cluster) at different degrees of metastability. Therefore, we have ordered the clusters according to their decreasing sizes and identified them in terms of kth largest cluster where, k = 1 denotes the largest cluster in the system, k = 2 represents the second largest and k = 3 is the third largest and so on. We have studied both the free energies and the trajectories of the liquid-like clusters in this extended set of order parameters. We further define Fkl(n) as the free energy of the kth largest cluster with size n. Classical nucleation theory provides an expression of unconditional free energy of a single cluster, F (n) (the free energy of formation of a cluster of size n), which is an intensive property of the system. The study of our conditional free energy surfaces, Fkl(n), reveals a more detailed, microscopic picture of the system’s cluster size distribution that is necessary to understand the kinetics of nucleation and growth at large metastability. The rate of nucleation shows a cross over at kinetic spinodal (the limit of metastability, ∆F1 l = 0). Below kinetic spinodal only one (largest) cluster crosses the critical size through activation whereas above this point more than one cluster grow simultaneously through barrierless diffusion. We present a theoretical analysis of the free energy of kth largest cluster based on order statistics. The theoretical predictions are in excellent agreement with computer simulation results for the range of supersaturation we studied. While the previous chapter focuses on relatively well-studied nucleation mechanism in 3dimensional (3D) LJ system at large metastability, in Chapter 6 we present our studies on the characteristics of the nucleation phenomena in two dimensional Lennard-Jones fluid for different ranges of interparticle interaction. Using various Monte Carlo (MC) methods, we calculate the free energy barrier of nucleation and bulk densities of equilibrium liquid and vapor phases, and also investigate the size and shape of the critical nuclei. We find an interesting interplay between the range of interaction potential and the extent of metastability. The free energy barrier of nucleation strongly depends on the range of interaction potential. The study is carried out at an intermediate level of supersaturation (away from the kinetic spinodal limit). A surprisingly large cutoff (rc � 7.0�, where � is the diameter of LJ particles) in the truncation of the LJ potential is required to obtain converged results. A lower cutoff leads to a substantial deviation in the values of the nucleation barrier, and characteristics of the critical cluster (with respect to full range of interaction). We observe that in 2D system CNT fails to provide a reliable estimate of the free energy barrier. While it is known to slightly overestimate the nucleation barrier in 3D, it underestimates the barrier by � 50% at the saturation ratio S =1.1 (defined as S = P/Pc, where Pc is the coexistence pressure) and at the reduced temperature T � =0.427 (defined as T � = kBT/�, where � is the depth of the potential well). The reason for the marked inadequacy of the CNT in 2D can be attributed to the non-circular nature of the critical clusters. Although the shape becomes increasingly circular and the clusters become more compact with increase in cutoff radius, an appreciable non-circular nature remains even for full potential (without truncation) to make the predictions of CNT inaccurate. In Chapter 7 we report the computer simulation study of nucleation in three dimensional LJ system. At a fixed supersaturation the free energy barrier of nucleation increases with increasing range of interparticle interaction. On increasing range of intermolecular interaction, the kinetic spinodal where the mechanism of nucleation changes from activated barrier crossing to barrierless diffusion, shifts towards the deep metastable region. Both the critical cluster size and pre-critical minimum in the free energy surface of kth largest cluster shift towards the smaller size at their respective kinetic spinodal as we increase the range of potential. We find only a weak non-trivial (other than supersaturation and surface tension) contribution to the free energy barrier of nucleation. Part III consists of two chapters and focuses on the liquid-solid phase transition of polydisperse fluid. In Chapter 8 we introduce polydisperse systems and their classification based on different identities. We describe the importance and abundance of polydisperse system in nature. The theoretical modeling of different polydisperse systems and their extent of applicability have also been presented. We have discussed about the various factors which control the phase diagram and various phenomena related to the structure and phase transition. In Chapter 9 we present computer simulation study on freezing/melting of Lennard-Jones (LJ) fluid at different polydispersities. The freezing/melting of polydisperse LJ fluids presents an interesting case study, because, as the polydispersity increases the energy-entropy balance becomes increasingly unfavorable for the solid to exist as a stable phase. The energy of the solid increases due to build up of strain energy because of increasing mismatch in size of the neighbors, while the entropy of the liquid increases. These two factors lead to the existence of a terminal polydispersity. We find beyond the terminal ploydispersity, δ. 0.11system remains in the disorder state even at very high pressure and low temperature. The terminal polydispersity obtained in the present study is close to the experimental value (δt. ≈ 12%). Interestingly, contrary to hard sphere polydisperse fluid, LJ fluid does not exhibit reentrant melting. The last part (Part IV) of the thesis consists of three chapters that deal with the enzyme catalysis and kinetic proofreading of tRNA-aminoacyl synthetases. In Chapter 10 we describe protein synthesis process in biological system and corresponding two processes: aminoacylation of tRNA and translation of amino acid in ribosome. Our interest is to understand the enzyme catalysis involved in aminoacylation of tRNA in the process of protein synthesis. We present the classification of 20 aminoacyl-tRNA synthetases into two classes based on their structure and mode of binding to ATP and tRNA. We discuss all the steps involved in whole tRNA-aminoacylation process. Then we introduce kinetic proofreading during aminoacylation reaction. In Chapter 11 we theoretically analyze the single turn over and steady state reaction mechanism of two classes of aminoacyl-tRNA synthetases. Class I enzymes not only differ in their structure but they also differ with respect to the pre-steady kinetics compared to class II enzymes. We find that the strong binding of product to class I enzymes causes the product release step to be rate limiting step leading to the burst of product formation in pre-steady reaction. On the other hand class II enzymes do not show any burst kinetics. The present study based on time dependent probability statistics is successful in explaining all the experimental results quantitatively. In Chapter 12 we present an augmented kinetic scheme and then employ methods of time dependent probability statistics to understand the mechanism of kinetic proofreading of isoleucyl-tRNA synthetase (IRS) which belongs to class I. We investigate that the enhanced hydrolysis of wrong substrate (Val) enables IRS to discriminate the correct substrate (Ile) and wrong substrate (Val) efficiently. It has been observed that an extra CP1 editing domain serves as an activating domain towards enhanced hydrolysis of Val. The present study is able to explain most of the existing experimental observations. In the concluding note, Chapter 13 lists a few relevant problems that may prove worthwhile to be addressed in future. In the Appendices, we present two of the techniques used in our present computer simulation and theoretical studies. Appendix A describes Grand Canonical Transition Matrix Monte Carlo (GC-TMMC) method which is employed in computer simulation studies of nucleation and surface tension. In Appendix B we present the probabilistic method of waiting time distribution computation used in enzyme catalysis and kinetic proofreading.

Combined thermodynamic/kinetic events amount to a kinetically controlled Dynamic Combinatorial Resolution (DCR) process, where the lability of themolecules/aggregates are used to generate dynamics, and the species experiencing the lowest activation energy is selected via kinetic process. Bothinter- and intramolecular processes can be performed using this concept,resulting in complete resolution and associated amplification of the selected species. When intermolecular processes are resolved using this method, an additional advantage is that only a catalytic amount of selector is required tocontrol the system.In this thesis, the Henry and Strecker reactions were developed as efficient C–C bond-forming routes to single and multi-level dynamic covalent systems.These methods efficiently provided a vast variety of substrates from smallnumbers of starting compounds. These dynamic systems, generated underthermodynamic control at mild conditions, were coupled in one-pot processes with kinetically controlled lipase-mediated transacylation. The enzym emediated resolution of the dynamic nitroaldol system led to enantiomericallypure β-nitroacetates in high yield. Furthermore, combination of multi-leveldynamic Strecker systems and lipase-mediated acylation resulted in theresolution of specific α-aminonitriles from the pool.In addition, the asymmetric synthesis of discrete β-nitroalkanol derivatives wassimply achieved, resulting in high yields and high enantiomeric purities through the direct one-pot procedure. Moreover, racemase type activity oflipase enzyme through N-substituted α-aminonitrile structure has been discovered. By use of control experiments together with molecular modeling,the mechanism of the racemization process has been established. Asymmetric synthesis of N-methyl α-aminonitriles was also performed through the dualfunction of lipase, resulting in high yield and good enantio selectivity. / <p>QC 20100818</p>

This thesis is divided into six parts, all centered around the development of dynamic (i.e., reversibly interacting) systems of molecules and their applications in dynamic combinatorial chemistry (DCC) and organic synthesis. Part one offers a general introduction, as well as a more detailed description of DCC, being the central concept of this thesis. Part two explores the potential of the nitroaldol reaction as a tool for constructing dynamic systems, employing benzaldehyde derivatives and nitroalkanes. This reaction is then applied in part three where a dynamic nitroaldol system is resolved by lipase-catalyzed transacylation, selecting two out of 16 components. In part four, reaction and crystallization driven DCC protocols are developed and demonstrated. The discovery of unexpected crystalline properties of certain pyridine β-nitroalcohols is used to resolve a dynamic system and further expanded into asynthetic procedure. Furthermore, a previously unexplored tandem nitroaldol-iminolactone rearrangement reaction between 2-cyanobenzaldehyde and primarynitroalkanes is used for the resolution of dynamic systems. It is also coupled with diastereoselective crystallization to demonstrate the possibility to combine several selection processes. The mechanism of this reaction is investigated and a synthetic protocol is developed for asymmetric synthesis of 3-substituted isoindolinones. Part five continues the exploration of tandem reactions by combining dynamic hemithioacetal or cyanohydrin formation with intramolecular cyclization to synthesize a wide range of 3-functionalized phthalides. Finally, part six deals with the construction of a laboratory experiment to facilitate the introduction of DCC in undergraduate chemistry education. The experiment is based on previous work in our group and features an acetylcholinesterase-catalyzed resolution of a dynamic transthioacylation system. / QC 20100628

No description available.