Le travail théorique présenté dans cette thèse concerne la formation de molécules ultra-froides bialcalines et le contrôle de leurs degrés de liberté externes et internes. Cette étude est motivée par les nombreuses expériences en cours visant à l'obtention d'un gaz quantique dégénéré de molécules dans leur état fondamental absolu. Le schéma de formation étudié repose sur le processus de transfert adiabatique stimulé (STIRAP) réalisé en présence d'un potentiel optique de piégeage (réseau optique) des atomes et des molécules.Nous avons déterminé les paramètres du réseau optique (intensité et fréquence du champ laser) qui permettent de piéger efficacement des dimères d'alcalins en évaluant la polarisabilité dynamique acquise par les molécules soumises à un champ externe. Ces calculs reposent en particulier sur la connaissance détaillée de la structure électronique des molécules. Nous avons identifié des plages de longueur d'ondes dites « magiques » où la polarisabilité est la même pour chaque niveau peuplé au cours du transfert adiabatique, permettant ainsi un transfert optimal. Ce formalisme nous a également permis d'obtenir les coefficients Van der Waals de l'interaction à longue portée nécessaires pour étudier les taux de collisions entre molécules.Nous avons réalisé une étude plus détaillée de la molécule RbCs. En étudiant précisément la probabilité de transition de la molécule vers un niveau excité, nous avons proposé un schéma STIRAP pour transférer des molécules de RbCs, initialement dans un niveau vibrationnel excité, vers leur état rovibrationnel fondamental.Ces travaux ont montré l'importance de la connaissance précise de la structure hyperfine de l'état électronique moléculaire excité pour réaliser un gaz dégénéré de molécules dans un état quantique bien défini. Un modèle asymptotique nous a permis d'obtenir une première estimation de la structure hyperfine des courbes d'énergies potentielles des premiers états moléculaires excités des molécules Cs2 et RbCs. / The theoretical work presented in this thesis is focused on the formation of ultracold bialcaline molecules and on the control of their external and internal degrees of freedom. This study is motivated by the increasing number of experiments aiming at obtaining a quantum degenerate gas of molecules in their absolute ground state. The formation scheme we worked on is based on the Stimulated Raman Adiabatic Passage (STIRAP) technique operated while molecules are trapped inside an optical lattice.We have determined the parameters of the optical lattice (intensity and wavelength of the laser) that allow for an efficient trapping of the alkali dimers by evaluating the dynamic polarizability of molecules in the presence of an external field. Such calculations require the accurate knowledge of the electronic structure of the molecules. We have identified the so-called ``magic'' wavelength for which all levels populated during the STIRAP sequence have the same polarizability, thus ensuring an optimal transfer. The same approach has also been used to compute the strength of the long-range interaction between polar bialkali molecules needed to evaluate collision rates.The particular case of the RbCs molecule has been investigated. We have selected a radiative transition allowing for an efficient STIRAP scheme yielding molecules in their rovibrational ground state. These works have raised the need for the precise knowledge of the hyperfine structure of the excited electronic molecular state involved in the STIRAP scheme. We have developed an asymptotic model to obtain a first estimate of the hyperfine structure for the potential curves of the lowest excited states of Cs2 and RbCs.

Für verschiedene Richtgrößen, die untersucht werden, um Hinweise auf Neue Physik jenseits des Standardmodells der Teilchenphysik zu finden, stellt die Gitter-QCD stellt derzeit den einzigen Ab-initio-Zugang für die Berechnung von nichtperturbativen hadronischen Beiträgen dar. Zu diesen Observablen gehören die anomalen magnetischen Momenten der Leptonen und das Laufen der elektroschwachen Kopplungskonstanten. Wir bestimmen den führenden QCD-Beitrag zum anomalen magnetischen Moment des Myons mit Hilfe einer Gitter-QCD-Rechnung auf Ensemblen, die Nf=2+1+1 dynamische Twisted-Mass-Fermionen berücksichtigen. Durch die Betrachtung aktiver up, down, strange and charm Quarks können erstmalig Gitter-QCD-Daten für die Myonanomalie direkt mit phänomenologischen Resultaten verglichen werden, da letztere bei der derzeitigen Genauigkeit sensitiv auf die ersten beiden Quarkgenerationen sind. Unlängst wurde darauf hingewiesen, dass es auch möglich sein könnte Beiträge Neuer Physik durch verbesserte Messungen der anomalen magnetischen Momente des Elektrons und des Tauons nachzuweisen. Aus diesem Grund berechnen wir auch deren führende QCD-Beiträge, was gleichzeitig eine Überprüfung des Wertes für das Myon liefert. Zusätzlich nutzen wir die gewonnenen Daten, um den führenden hadronischen Beitrag zum Laufen der Feinstrukturkonstante zu berechnen. Darüber hinaus zeigen wir, dass sogar für den schwachen Mischungswinkel der führende QCD-Beitrag mit Hilfe dieser Daten berechnet werden kann. Dadurch identifizieren wir eine neue grundlegende Observable für die Suche nach Neuer Physik, deren hadronische Beiträge mit Hilfe der Gitter-QCD beschafft werden können. Mit den Resultaten dieser Arbeit ist es uns gelungen ungeeignete Herangehensweisen der phänomenologisch notwendigen Flavourseparation auszuschließen und somit direkt die derzeit präziseren phänomenologischen Bestimmungen dieser bedeutsamen physikalischen Größe zu unterstützen. / For several benchmark quantities investigated to detect signs for new physics beyond the standard model of elementary particle physics, lattice QCD currently constitutes the only ab initio approach available at small momentum transfers for the computation of non-perturbative hadronic contributions. Among those observables are the lepton anomalous magnetic moments and the running of the electroweak coupling constants. We compute the leading QCD contribution to the muon anomalous magnetic moment by performing lattice QCD calculations on ensembles incorporating Nf=2+1+1 dynamical twisted mass fermions. Considering active up, down, strange, and charm quarks, admits for the first time a direct comparison of the lattice data for the muon anomaly with phenomenological results because both the latter as well as the experimentally obtained values are sensitive to the complete first two generations of quarks at the current level of precision. Recently, it has been noted that improved measurements of the electron and tau anomalous magnetic moments might also provide ways of detecting new physics contributions. Therefore, we also compute their leading QCD contributions, which simultaneously serve as cross-checks of the value obtained for the muon. Additionally, we utilise the obtained data to compute the leading hadronic contribution to the running of the fine structure constant, which enters all perturbative QED calculations. Furthermore, we show that even for the weak mixing angle the leading QCD contribution can be computed from this data. In this way, we identify a new prime observable in the search for new physics whose hadronic contributions can be obtained from lattice QCD. With the results obtained in this thesis, we are able to exclude unsuitable phenomenologically necessary flavour separations and thus directly assist the presently more precise phenomenological determinations of this eminent quantity.

Le mélange vertical dans l’océan contribue au maintien de la Cellule Méridienne de Circulation Océanique (MOC) en permettant le renouvellement des eaux profondes. Une coupe transverse d’une partie de la MOC est réalisée par la radiale hydrologique OVIDE qui a lieu tous les 2 ans depuis 2002 entre le Portugal et le Groenland. L’énergie nécessaire au mélange est fournie par les ondes internes générées par le vent et la marée, et des mesures de micro-structure (VMP) en 2008 montrent des valeurs de dissipation Evmp intensifiées dans la thermocline principale et au niveau des topographies. Notre étude se base sur ces observations pour étudier la fine-structure verticale de l’océan et estimer indirectement la dissipation E due aux ondes internes à l’aide de mesures CTD et LADCP. La comparaison au mesures du VMP permet d’optimiser la paramétrisation de E en encadrant les observations par facteur 3 et leurs valeurs moyennes à ±30%. L’application sur l’ensemble des données OVIDE permet d’obtenir une cartographie du mélange a travers le bassin. La distribution géographique de la diffusion verticale K est similaire le long des 5 sections, avec des valeurs de l’ordre de 10−4m2/s dans la thermocline principale, au fond et au niveau des topographies, et de l’ordre de 10−5m2/s dans l’océan intérieur. Des différences régionales sont présentes et K peut être localement proche de 10−3m2/s. L’étude de la section FOUREX 1997 révèle une intensification de K le long de la dorsale médio-Atlantique où les valeurs moyennes sont de 2 à 3 plus fortes que le long des sections OVIDE. La distribution spatiale des échelles de Thorpe LT est corrélée avec celle du mélange. Néanmoins la dissi-pation basée sur LT surestime Evmp d’un facteur 10 à100, ce qui pourrait être dû à une mauvaise représentation de la durée de vie de la turbulence dans l’océan. Certains mécanismes susceptibles de générer des ondes internes sont proposés. Des sites possibles de génération par la marée sont localisés à l’aide d’un modèle simple de la trajectoire des rayons d’ondes. Une corrélation possible entre les mouvements géostrophiques et les ondes internes est envisagée dans la thermocline principale. Enfin l’étude des angles de Turner montre que des instabilités de double-diffusion peuvent être présentes sur une grande partie de la section. / Vertical mixing in the ocean contributes to sustain the Meridionnal Overturning. Circulation (MOC) by allowing the renewal of deep waters. A section across the MOC is performed by the hydrological radial OVIDE repeated every two years between Portugal and Greenland since 2002. The energy required for mixing is provided by internal waves generated by wind and tides and micro-structure measurements(VMP) in 2008 show intensified values of dissipation Evmp in the main thermocline and near topographies. Our study is based on these observations and aims tostudy the vertical fine-scale structure of the ocean. Estimates of the dissipation E due to internal waves are made with CTD and LADCP measurements. The comparison with VMP measurements allow us to optimize the parameterization of E by framing the observations by factor 3 and their mean values at ±30%. The systematic application to the OVIDE dataset provides a mapping of the mixing across the basin. Geographical distribution of the vertical diffusion K is similar along the five sections, with values near10−4m2/s in the main thermocline and at the bottom of topographies, and near 10−5m2/s in the ocean interior. Regional differences are present and K can belocally close to 10−3m2/s. Application to FOUREX1997 datas et reveals an increase of K along the Mid-Atlantic Ridge, where the average values are 2 to 3stronger than along OVIDE sections. The spatial distribution of Thorpe scales LT appears to be correlated with internal waves mixing patterns. Nevertheless dissipation estimates based on LT overestimates Evmp by a 10 to 100 factor, which maybe due to misrepresentation of the stage of turbulence development in the ocean. Some mechanisms that can generate internal waves are proposed. Probable sites where tidal generation could occur are located using a simple model of wave beam trajectory. A possible correlation between geostrophic flows and internal waves is considered in the main thermocline. Finally the study of Turnerangles shows that double-diffusion instabilities may bepresent over a large part of the section.

Cette thèse présente une analyse approfondie et comparative des résultats de mesures µ-XRD et µ-XAS sur des combustibles UO2 standard, dopé au sesquioxyde de chrome (Cr2O3) et MOX, irradiés ou non. Elle présente également l'interprétation des résultats en regard des effets induits par le chrome en tant que dopant ainsi que par la présence de plusieurs produits de fission. Les paramètres de maille de l’UO2 et les paramètres de densité d'énergie de déformation élastique dans les matériaux irradiés ou non ont été mesurés et quantifiés. Les données de µ-XRD ont en outre permis l'évaluation de la taille des domaines cristallins, ainsi que l’étude de la formation de sous-grains à différentes positions au sein des pastilles de combustibles irradiés. Le paramètre de maille et l'environnement atomique local du chrome dans des précipités d’oxyde de chrome présents dans les pastilles de combustible non-irradié ont également été déterminés. La structure locale du Cr dans la matrice du combustible dopé et l'influence de l'irradiation sur l'état du chrome dans la matrice de combustible ont été étudiées. Enfin, pour une comparaison du comportement des gaz de fission et du phénomène de re-solution induite par l'irradiation dans l’UO2 standard ou dopé, la dernière partie de ce travail propose une tentative d'analyse de l’environnement atomique du Kr dans ces deux combustibles irradiés. Le travail effectué par micro-faisceau XAS sur ce gaz de fission a permis la détermination des distances du Kr avec ses proches voisins, une estimation des densités atomiques des gaz de fission dans les agrégats et des pressions internes apparentes dans ces nano-phases de gaz inertes. / This thesis work reports in depth analyses of measured µ-XRD and µ-XAS data from standard UO2, chromia (Cr2O3) doped UO2 and MOX fuels, and interpretation of the results considering the role of chromium as a dopant as well as several fission product elements. The lattice parameters of UO2 in fresh and irradiated samples and elastic strain energy densities in the irradiated UO2 samples have been measured and quantified. The µ-XRD patterns have further allowed the evaluation of the crystalline domain size and sub-grain formation at different locations of the irradiated fuel pellets. Attempts have been made to determine lattice parameter and next neighbor atomic environment in chromia-precipitates found in fresh chromia-doped fuel pellets. The local structure around Cr in as-fabricated chromia-doped UO2 matrix and the influence of irradiation on the state of chromium in irradiated fuel matrix have been addressed. Finally, for a comparative understanding of fission gases behavior and irradiation induced re-solution phenomenon in standard and chromia-doped UO2, the last part of the present work tries to clarify the fission gas Kr atomic environment in these irradiated fuels. The work performed on Kr, by micro-beam XAS, comprises the determination of Kr next neighbor distances, an estimation of gas atom densities in the aggregates, and apparent internal pressures in the gas bubbles.

<p>Atoms, molecules and clusters all constitute building blocks of macroscopic matter. Therefore, understanding the electronic and geometrical properties of such systems is the key to understanding the properties of solid state objects.</p><p>In this thesis, some atomic, molecular and cluster systems (clusters of O₂, CH₃Br, Ar/O₂, Ar/Xe and Ar/Kr; dimers of Na; Na and K atoms) have been investigated using synchrotron radiation, and in the two last instances, laser light. We have performed x-ray photoelectron spectroscopy (XPS) on all of these systems. We have also applied ultraviolet photoelectron spectroscopy (UPS), resonant Auger spectroscopy (RAS) and near-edge x-ray absorption spectroscopy (NEXAFS) to study many of the systems. Calculations using <i>ab initio</i> methods, namely density functional theory (DFT) and Møller-Plesset perturbation theory (MP), were employed for electronic structure calculations. The geometrical structure was studied using a combination of <i>ab initio</i> and molecular dynamics (MD) methods.</p><p>Results on the dissociation behavior of CH₃Br and O₂ molecules in clusters are presented. The dissociation of the Na₂ molecule has been characterized and the molecular field splitting of the Na 2<i>p</i> level in the dimer has been measured. The molecular field splitting of the CH₃Br 3<i>d</i> level has been measured and the structure of CH₃Br clusters has been determined to be similar to the structure of the bulk solid. The diffusion behavior of O₂, Kr and Xe on large Ar clusters, as a function of doping rate, has been investigated. The shake-down process has been observed from excited states of Na and K. Laser excited Na atoms have been shown to be magnetically aligned. The shake-down process was used to characterize the origin of various final states that can be observed in the spectrum of ground-state K.</p>

Atoms, molecules and clusters all constitute building blocks of macroscopic matter. Therefore, understanding the electronic and geometrical properties of such systems is the key to understanding the properties of solid state objects. In this thesis, some atomic, molecular and cluster systems (clusters of O2, CH3Br, Ar/O2, Ar/Xe and Ar/Kr; dimers of Na; Na and K atoms) have been investigated using synchrotron radiation, and in the two last instances, laser light. We have performed x-ray photoelectron spectroscopy (XPS) on all of these systems. We have also applied ultraviolet photoelectron spectroscopy (UPS), resonant Auger spectroscopy (RAS) and near-edge x-ray absorption spectroscopy (NEXAFS) to study many of the systems. Calculations using ab initio methods, namely density functional theory (DFT) and Møller-Plesset perturbation theory (MP), were employed for electronic structure calculations. The geometrical structure was studied using a combination of ab initio and molecular dynamics (MD) methods. Results on the dissociation behavior of CH3Br and O2 molecules in clusters are presented. The dissociation of the Na2 molecule has been characterized and the molecular field splitting of the Na 2p level in the dimer has been measured. The molecular field splitting of the CH3Br 3d level has been measured and the structure of CH3Br clusters has been determined to be similar to the structure of the bulk solid. The diffusion behavior of O2, Kr and Xe on large Ar clusters, as a function of doping rate, has been investigated. The shake-down process has been observed from excited states of Na and K. Laser excited Na atoms have been shown to be magnetically aligned. The shake-down process was used to characterize the origin of various final states that can be observed in the spectrum of ground-state K.

Semiconductor quantum dots (QDs) are fascinating systems for potential applications in quantum information processing and communication, since they can emit single photons and polarisation entangled photons pairs on demand. The asymmetry and inhomogeneity of real QDs has driven the development of a universal and fine post-growth tuning technique. In parallel, new growth methods are desired to create QDs with high emission efficiency and to control combinations of closely-spaced QDs, so-called "QD molecules" (QDMs). These systems are crucial for the realisation of a scalable information processing device after a tuning of their interaction energies. In this work, GaAs/AlGaAs QDs with low surface densities, high optical quality and widely tuneable emission wavelength are demonstrated, by infilling nanoholes fabricated by droplet etching epitaxy with different GaAs amounts. A tuning over a spectral range exceeding 10 meV is obtained by inducing strain in the dot layer. These results allow a fine tuning of the QD emission to the rubidium absorption lines, increasing the yield of single photons that can be used as hybrid semiconductor-atomic-interface. By embedding InGaAs/GaAs QDs into diode-like nanomembranes integrated onto piezoelectric actuators, the first device allowing the QD emission properties to be engineered by large electroelastic fields is presented. The two external fields reshape the QD electronic properties and allow the universal recovery of the QD symmetry and the generation of entangled photons, featuring the highest degree of entanglement reported to date for QD-based photon sources. A method for controlling the lateral QDM formation over randomly distributed nanoholes, created by droplet etching epitaxy, is demonstrated by depositing a thin GaAs buffer over the nanoholes. The effect on the nanohole occupancy of the growth parameters, such as InAs amount, substrate temperature and arsenic overpressure, is investigated as well. The QD pairs show good optical quality and selective etching post-growth is used for a better characterisation of the system. For the first time, the active tuning of the hole tunnelling rates in vertically aligned InGaAs/GaAs QDM is demonstrated, by the simultaneous application of electric and strain fields, optimising the device concept developed for the single QDs. This result is relevant for the creation and control of entangled states in optically active QDs. The modification of the electronic properties of QDMs, obtained by the combination of the two external fields, may enable controlled quantum operations.

Self-assembled monolayers (SAMs) provide well-defined and ordered films of molecules spontaneously chemisorbed on a surface. By designing molecules with desired functionalities, such molecular film can be interesting for a range of applications from molecular electronics to catalysis. Important parameters for SAM applications are the film structure and quality, which are dependent on the structure of molecular constituents, the substrate, and the self-assembly process. In this work, SAMs on Au(111) of a variety of functionalized molecules, with thiol and silane headgroups, have been studied using high-resolution X-ray photoemission spectroscopy (HRXPS), near-edge X-ray absorption fine structure (NEXAFS) spectroscopy, Infrared reflection absorption spectroscopy (IRRAS), contact angle measurements and Kelvin probe measurements. In particular, the effects of varying the size of the backbone, varying the headgroup, inclusion of a porphyrin tailgroup, different ways of deprotection of the headgroups, and mixed molecular layers have been investigated. The first part of thesis work is focused on SAMs of oligo(phenyleneethynylene) (OPE) derivatives. First the effect of the extent of the conjugated system on the structure of SAM was investigated. As the lateral π-system in the OPE backbone increases, molecular surface densities become lower and molecular inclinations larger. Subsequently, a bulky porphyrin tailgroup was added onto the OPE molecule. Porphyrin-functionalized OPE with several headgroups were compared and the thioacetyl anchor group was found to form a high quality SAM. In the second part of the work, the molecular orientation of thiol-derivatized tetraphenylporphyrin layers was studied. The geometry of the molecular layer and the number of linkers that bind to the gold surface depend strongly on preparation schemes, i.e. whether or not the acetyl protection groups on the thiol were removed before adsorption. Finally, mixed SAMs of a ferrocene-terminated alkanethiol and alkanethiols were studied. By diluting the ferrocene-functionalized molecules in unfunctionalized alkanethiols, the orientational order and the packing density improved. The geometrical structure and the fraction of the ferrocene-terminated molecules can be tuned by controlling the parameters in the preparation scheme.

Orientadores: Gustavo de Medeiros Azevedo, Ângelo Malachias de Souza, Eduardo Granado Monteiro da Silva / Tese (doutorado) - Universidade Estadual de Campinas, Instituto de Fisica Gleb Wataghin / Made available in DSpace on 2018-08-19T08:06:03Z (GMT). No. of bitstreams: 1 Gasperini_AntonioAugustoMalfatti_D.pdf: 9911404 bytes, checksum: e5b4150f5a1f5f42c4d0e24b92e46c65 (MD5) Previous issue date: 2011 / Resumo: Neste trabalho estudamos a formação e estrutura de nanopartículas (NPs) de GeSi encapsuladas em sílica, utilizando técnicas baseadas em luz síncrotron, complementadas com imagens de microscopia eletrônica de transmissão. Obtivemos a forma, o diâmetro médio e a dispersão de tamanhos usando espalhamento de raios X a baixos ângulos em incidência rasante (GISAXS). A partir dos dados de difração de raios X (XRD) foi possível obter a fase cristalina, o parâmetro de rede e o tamanho médio dos cristalitos. Estes resultados serviram como dados de entrada em um modelo para análise através da técnica de estrutura fina de absorção de raios X (EXAFS), a qual forneceu informações sobre a estrutura local na vizinhança dos átomos de Ge. Apesar dos resultados de cada uma das técnicas acima serem comumente analisados de forma separada, a combinação destas técnicas leva a uma melhor compreensão das propriedades estruturais das NPs. Através da combinação dos resultados tivemos acesso a informações tais como a deformação da rede cristalina (strain), a fração de átomos cm ambientes cristalino e amorfo, a fração de átomos de Ge diluída na matriz e a possibilidade de formação de estruturas do tipo core-shell cristalino-amorfo. Resultados adicionais como a origem do strain e a temperatura de solidificação das NPs, dentre outros, foram obtidos através de um experimento in situ de absorção de raios X em energia dispersiva (DXAS), inédito na análise deste sistema. Por fim, utilizamos as técnicas acima citadas para acompanhar a evolução dos parâmetros estruturais em amostras tratadas termicamente durante diferentes intervalos de tempo / Abstract: In this work we study the formation and structure of GeSi nanoparticles embedded in silica matrix using synchrotron-based techniques complemented by TEM images. Shape, average diameter and size dispersion were obtained from grazing incidence small angle X-ray scattering. X-ray diffraction measurements were used to obtain crystalline phase, lattice parameter and crystallite mean sizes. By using these techniques as input for extended X-ray absorption fine structure analysis, the local structure surrounding Ge atoms is investigated. Although the results for each of the methods mentioned above are usually analyzed separately, the combination of such techniques leads to an improved understanding of nanoparticle structural properties. Crucial indirect parameters that cannot be quantified by other means are accessed in our work, such as local strain, possibility of forming core-shell crystalline-amorphous structures, fraction of Ge atoms diluted in the matrix and amorphous and crystalline Ge fraction. Additional results as the origin of the strain and temperature of solidification of NPs, among others, were obtained through an in situ energy dispersive X-ray absorption experiment (DXAS), unheard in this system. Finally, we use the techniques mentioned above to monitor the evolution of the structural parameters of samples annealed during different time intervals / Doutorado / Física / Doutor em Ciências

Multi-metallic aerogels have recently emerged as a novel and promising class of unsupported electrocatalyst materials due to their high catalytic activity and improved durability for various electrochemical reactions. Aerogels can be prepared by a spontaneous one-step gelation process, where the chemical co-reduction of metal precursors and the prompt formation of the nanochain-consisting hydrogels, as a preliminary stage for the preparation of aerogels take place. However, detailed knowledge about the homogeneity and chemical distribution of these three-dimensional Pd-Pt aerogels at the nano-scale as well as at the macro-scale is still unclear to date. Therefore, we used a combination of spectroscopic and microscopic techniques to obtain a better insight into the structure and elemental distribution of the various Pd-rich Pd-Pt aerogels prepared by the spontaneous one-step gelation process. Synchrotron-based extended X-ray absorption fine structure (EXAFS) spectroscopy and high-angle annular dark-field (HAADF) scanning transmission electron microscopy (STEM) in combination with energy-dispersive X-ray spectroscopy (EDX) were employed in this work to uncover the structural architecture and chemical composition of the various Pd-rich Pd-Pt aerogels over a broad length range. The Pd80Pt20, Pd60Pt40 and Pd50Pt50 aerogels showed heterogeneity in the chemical distribution of the Pt and Pd atoms inside the macroscopic nanochain-network. Features of monometallic clusters were not detected by EXAFS or STEM-EDX, indicating alloyed nanoparticles. However, the local chemical composition of the Pd-Pt alloys strongly varied along the nanochains and thus within a single aerogel. To determine the electrochemically active surface area (ECSA) of the Pd-Pt aerogels for applications in electrocatalysis, we used the electrochemical CO stripping method. Due to high porosity and extended network structure, the resulting values of the ECSA for the Pd-Pt aerogels were higher than that for a commercially available unsupported Pt black catalyst. We show that the Pd-Pt aerogels possess a high utilization of catalytically active centers for electrocatalytic applications based on the nanostructured bimetallic framework. Knowledge about the homogeneity and chemical distribution of the bimetallic aerogels can help to further optimize their preparation by the spontaneous one-step gelation process and to tune their electrocatalytic reactivity.