Field-programmable analog arrays (FPAA) are integrated circuits with a collection of analog building blocks connected through a wire and switch fabric to achieve reconfigurability similar to the FPGAs of the digital domain. Like FPGAs, FPAAs can help reduce the time and money costs of the integrated circuit design cycle and make analog design much easier. In recent years, several types of FPAAs have been developed. Among these, FPAAs that use floating-gate transistors as programming elements have shown great potential in scalability because of the simplicity they provide in configuring the chip. Existing tools for programming FPAAs tend to be device specific and aimed at specific tasks such as filter design. To move FPAAs to the next step, more powerful and generic placement and routing tools are necessary. This thesis presents a placement and routing tool for large-scale floating-gate-based FPAAs. A topology independent routing resource graph (RRG) was used to model the FPAA routing topology, which enables generic description of any FPAA architecture with arbitrary connectivity including possible FPGA support in the future as well. So far, different FPAA architectures have been specified and routed successfully. The tool is already in use in classes and workshops for analog circuit and system design. Efficient ways to describe circuits and user constraints were developed to allow easy integration with other tools. Analog circuit performance was optimized by taking into account the routing parasitic effects on interconnects under various device-related constraints. Parasitic modeling allows simulation and evaluation of circuits routed on FPAA. Finally, a methodology was developed to explore the optimum architecture for a set of circuit classes by evaluating the efficiency of different architectures for each circuit class.

Many problems exist in current photoresist designs that will limit their ability to obtain the performance required for future generations of integrated circuit devices. In order to overcome these challenges, novel resist designs are required, along with advancement in the fundamental understanding of the source of these problems. A mesoscale kinetic Monte Carlo simulation of resists was developed to probe the effects of changes in resist formulation and processing. A detailed SEM simulator was developed in order to better understand the effect of metrology on the characterization of the final resist relief image. Several important structure-property relations were developed for the prediction of glass transition temperature in molecular resists and the prediction of the solubility of molecular resists in developer. Five new families of molecular resists were developed that provide solutions to some of the limitations in current resist designs. Single component molecular resists have all of the functional groups required to act as a chemically amplified resist contained in a single molecule. This eliminates inhomogeneities in the resist and provides improved line edge roughness. Non-chemically amplified molecular resists were developed that have very good sensitivity due to the unique dissolution properties of molecular resists. Negative tone molecular resists were developed that have an excellent combination of resolution, sensitivity, and line edge roughness with better resolution than has been previously seen in negative tone resists. Control methods were also developed to improve the resolution of these types of negative tone resists even further.

In this doctoral dissertation, the author presents the theoretical foundation, the analysis and design of analog and RF circuits, the chip level implementation, and the experimental validation pertaining to a new radio frequency integrated circuit (RFIC) power amplifier (PA) architecture that is intended for wireless portable transceivers. / A method called Gated Envelope Feedback is proposed to allow the automatic hardware reconfiguration of a stand-alone RFIC PA in multiple states for power efficiency improvement purposes. The method uses self-operating and fully integrated circuitry comprising RF power detection, switching and sequential logic, and RF envelope feedback in conjunction with a hardware gating function for triggering and activating current reduction mechanisms as a function of the transmitted RF power level. Because of the critical role that RFIC PA components occupy in modern wireless transceivers, and given the major impact that these components have on the overall RF performances and energy consumption in wireless transceivers, very significant benefits stem from the underlying innovations. / The method has been validated through the successful design of a 1.88GHz COMA RFIC PA with automatic hardware reconfiguration capability, using an industry renowned state-of-the-art GaAs HBT semiconductor process developed and owned by Skyworks Solutions, Inc., USA. The circuit techniques that have enabled the successful and full on-chip embodiment of the technique are analyzed in details. The IC implementation is discussed, and experimental results showing significant current reduction upon automatic hardware reconfiguration, gain regulation performances, and compliance with the stringent linearity requirements for COMA transmission demonstrate that the gated envelope feedback method is a viable and promising approach to automatic hardware reconfiguration of RFIC PA's for current reduction purposes. Moreover, in regard to on-chip integration of advanced PA control functions, it is demonstrated that the method is better positioning GaAs HBT technologies, which are known to offer very competitive RF performances but inherently have limited integration capabilities. / Finally, an analytical approach for the evaluation of inter-modulation distortion (IMD) in envelope feedback architectures is introduced, and the proposed design equations and methodology for IMD analysis may prove very helpful for theoretical analyses, for simulation tasks, and for experimental work.

No description available.

No description available.

Bibliography: leaves 233-259 / xii, 259 leaves : ill ; 30 cm. / Title page, contents and abstract only. The complete thesis in print form is available from the University Library. / Thesis (Ph.D.)--University of Adelaide, 1991

Recentemente, o Brasil adotou o padrão SBTVD (Sistema Brasileiro de TV Digital) para transmissão de TV digital. Este utiliza o CODEC (codificador e decodificador) de vídeo H.264/AVC, que é considerado o estado-da-arte no contexto de compressão de vídeo digital. Esta transição para o SBTVD requer o desenvolvimento de tecnologia para transmissão, recepção e decodificação de sinais, assim, o projeto Rede H.264 SBTVD foi iniciado e tem como um dos objetivos a produção de componentes de hardware para construção de um set-top box SoC (System on Chip) compatível com o SBTVD. No sentido de produzir IPs (Intellectual Property) para codificação e decodificação de vídeo digital segundo o padrão H.264/AVC, várias arquiteturas de hardware vêm sendo desenvolvidas no âmbito do projeto. Assim, o objetivo deste trabalho consiste na realização da implementação física em ASIC (Application-Specific Integrated Circuit) de algumas destas arquiteturas de hardware para decodificação de vídeo H.264/AVC, entre elas as arquiteturas parser e decodificação de entropia, predição intra-quadro e, por fim, quantização e transformadas inversas, que juntas formam uma versão funcional de um decodificador de vídeo H.264 chamado de decodificador intra-only. Além destas, também foi fisicamente implementada uma arquitetura para o módulo filtro redutor de efeito de bloco e arquiteturas para os perfis Main e High de um compensador de movimentos. Nesta dissertação de mestrado, é apresentada a metodologia de implementação standard-cells (ASIC) utilizada, assim como uma descrição detalhada de cada passo executado para se chegar ao leiaute de cada uma das arquiteturas. Também são apresentados os resultados das implementações e realizadas algumas comparações com outras implementações de arquiteturas descritas na literatura. A implementação do filtro possui 43,9K portas lógicas (equivalent-gates), 42mW de potência e possui a menor quantidade de memória interna, 12,375KB SRAM, quando comparada com outras implementações para a mesma resolução de vídeo, 1920x1080@30fps. As implementações para os perfis Main e High do compensador de movimento apresentam a melhor relação entre a quantidade de ciclos de relógio necessária para interpolar um macrobloco (MB), 304 ciclos/MB, e a quantidade de equivalent-gates de cada implementação, 98K e 102K, respectivamente. Já a implementação do decodificador H.264 intra-only possui 5KB SRAM, 11,4mW de potência e apresenta a menor quantidade de equivalent-gates, 150K, comparado com outras implementações de decodificadores H.264 com características similares. / Recently Brazil has adopted the SBTVD (Brazilian Digital Television System) for digital TV transmission. It uses the H.264/AVC video CODEC (coder and decoder), which is considered the state of the art in the context of digital video compression. This transition to the SBTVD standard requires the development of technology for transmitting, receiving and decoding signals, so a project called Rede H.264 was initiated with the objective of producing cutting edge hardware components to build a set-top box SoC (System on Chip) compatible with the SBTVD. In order to produce IPs (Intellectual Property) for encoding and decoding digital video according to the H.264/AVC standard, many hardware architectures have been developed under the project. Therefore, the objective of this work is to carry out the physical implementation flow for ASIC (Application-Specific Integrated Circuit) in some of these hardware architectures for H.264/AVC video decoding, including the architectures parser and entropy decoding, intra-prediction and inverse quantization and transforms, which together compound a working version of an H.264 video decoder called intra-only. Besides these architectures, it is also physically implemented an architecture for a deblocking filter module and architectures for motion compensation according the Main and High profiles. This master thesis presents the standard-cells (ASIC) implementation as well as a detailed description of each step necessary to outcome the layouts of each of the architecture. It also presents the results of the implementations and comparisons with other works in the literature. The implementation of the filter has 43.9K gates (equivalent-gates), 42mW of power consumption and it demands the least amount of internal memory, 12.375KB SRAM, when compared with other implementations for the same video resolution, 1920x1080@30fps. The implementations for the Main and High profiles of the motion compensator have the best relationship between the amount of required clock cycles to interpolate a macroblock (MB), 304 cycles/MB, and the equivalent-gate count of each implementation, 98K and 102K, respectively. Also, the implementation of the H.264 intra-only decoder has 5KB SRAM, 11.4 mW of power consumption and it has the least equivalent-gate count, 150K, compared with other implementations of H.264 decoders which have similar features.

Este trabalho apresenta o desenvolvimento de uma nova ferramenta para a síntese automática de células, a partir de uma descrição estrutural no nível lógico. A ferramenta esta sendo integrada ao sistema TRAMO3, e visa eliminar a necessidade do use de biblioteca de células na geração de circuitos. Uma revisão sobre síntese de leiaute e metodologias de projeto é apresentada. A metodologia TRANCA é descrita de forma sucinta e os sistemas TRAMO2 e TRAMO3, assim como o roteador MARTE são analisados em detalhe para indicar o contexto onde se insere o trabalho. As principais alternativas para a geração de células são analisadas e o algoritmo descrito em [REI 93b] é utilizado com algumas modificações, levando em conta situações praticas. Os seguintes passos são executados durante o processo: posicionamento dos transistores, roteamento das conexões internas e compactação do leiaute. Finalmente, alguns melhoramentos no gerador são propostos, de forma a eliminar algumas restrições impostas na primeira versão. / This work presents the development of a new tool for automatic cell synthesis, starting from a structural description at the logic level. The tool is currently being integrated to TRAMO3 system, and aims at eliminating the need of cell libraries utilization during the circuit generation. A brief review about layout synthesis and design methodologies is presented. TRANCA design approach is briefly described and the TRAMO2 and TRAMO3 systems, as well as the MARTE router are analyzed with some detail in order to show the environment where the work is inserted. The main alternatives for cell generation are analyzed and the algorithm described in [REI 93b] is used with some changes, taking into account practical situations. The following steps are executed during the process: transistor placement, routing of internal connections and layout compaction. Finally, some improvements to the generator are proposed, in order to remove some restrictions imposed in the first version.

Este trabalho apresenta o desenvolvimento de uma nova ferramenta para a síntese automática de células, a partir de uma descrição estrutural no nível lógico. A ferramenta esta sendo integrada ao sistema TRAMO3, e visa eliminar a necessidade do use de biblioteca de células na geração de circuitos. Uma revisão sobre síntese de leiaute e metodologias de projeto é apresentada. A metodologia TRANCA é descrita de forma sucinta e os sistemas TRAMO2 e TRAMO3, assim como o roteador MARTE são analisados em detalhe para indicar o contexto onde se insere o trabalho. As principais alternativas para a geração de células são analisadas e o algoritmo descrito em [REI 93b] é utilizado com algumas modificações, levando em conta situações praticas. Os seguintes passos são executados durante o processo: posicionamento dos transistores, roteamento das conexões internas e compactação do leiaute. Finalmente, alguns melhoramentos no gerador são propostos, de forma a eliminar algumas restrições impostas na primeira versão. / This work presents the development of a new tool for automatic cell synthesis, starting from a structural description at the logic level. The tool is currently being integrated to TRAMO3 system, and aims at eliminating the need of cell libraries utilization during the circuit generation. A brief review about layout synthesis and design methodologies is presented. TRANCA design approach is briefly described and the TRAMO2 and TRAMO3 systems, as well as the MARTE router are analyzed with some detail in order to show the environment where the work is inserted. The main alternatives for cell generation are analyzed and the algorithm described in [REI 93b] is used with some changes, taking into account practical situations. The following steps are executed during the process: transistor placement, routing of internal connections and layout compaction. Finally, some improvements to the generator are proposed, in order to remove some restrictions imposed in the first version.

Recentemente, o Brasil adotou o padrão SBTVD (Sistema Brasileiro de TV Digital) para transmissão de TV digital. Este utiliza o CODEC (codificador e decodificador) de vídeo H.264/AVC, que é considerado o estado-da-arte no contexto de compressão de vídeo digital. Esta transição para o SBTVD requer o desenvolvimento de tecnologia para transmissão, recepção e decodificação de sinais, assim, o projeto Rede H.264 SBTVD foi iniciado e tem como um dos objetivos a produção de componentes de hardware para construção de um set-top box SoC (System on Chip) compatível com o SBTVD. No sentido de produzir IPs (Intellectual Property) para codificação e decodificação de vídeo digital segundo o padrão H.264/AVC, várias arquiteturas de hardware vêm sendo desenvolvidas no âmbito do projeto. Assim, o objetivo deste trabalho consiste na realização da implementação física em ASIC (Application-Specific Integrated Circuit) de algumas destas arquiteturas de hardware para decodificação de vídeo H.264/AVC, entre elas as arquiteturas parser e decodificação de entropia, predição intra-quadro e, por fim, quantização e transformadas inversas, que juntas formam uma versão funcional de um decodificador de vídeo H.264 chamado de decodificador intra-only. Além destas, também foi fisicamente implementada uma arquitetura para o módulo filtro redutor de efeito de bloco e arquiteturas para os perfis Main e High de um compensador de movimentos. Nesta dissertação de mestrado, é apresentada a metodologia de implementação standard-cells (ASIC) utilizada, assim como uma descrição detalhada de cada passo executado para se chegar ao leiaute de cada uma das arquiteturas. Também são apresentados os resultados das implementações e realizadas algumas comparações com outras implementações de arquiteturas descritas na literatura. A implementação do filtro possui 43,9K portas lógicas (equivalent-gates), 42mW de potência e possui a menor quantidade de memória interna, 12,375KB SRAM, quando comparada com outras implementações para a mesma resolução de vídeo, 1920x1080@30fps. As implementações para os perfis Main e High do compensador de movimento apresentam a melhor relação entre a quantidade de ciclos de relógio necessária para interpolar um macrobloco (MB), 304 ciclos/MB, e a quantidade de equivalent-gates de cada implementação, 98K e 102K, respectivamente. Já a implementação do decodificador H.264 intra-only possui 5KB SRAM, 11,4mW de potência e apresenta a menor quantidade de equivalent-gates, 150K, comparado com outras implementações de decodificadores H.264 com características similares. / Recently Brazil has adopted the SBTVD (Brazilian Digital Television System) for digital TV transmission. It uses the H.264/AVC video CODEC (coder and decoder), which is considered the state of the art in the context of digital video compression. This transition to the SBTVD standard requires the development of technology for transmitting, receiving and decoding signals, so a project called Rede H.264 was initiated with the objective of producing cutting edge hardware components to build a set-top box SoC (System on Chip) compatible with the SBTVD. In order to produce IPs (Intellectual Property) for encoding and decoding digital video according to the H.264/AVC standard, many hardware architectures have been developed under the project. Therefore, the objective of this work is to carry out the physical implementation flow for ASIC (Application-Specific Integrated Circuit) in some of these hardware architectures for H.264/AVC video decoding, including the architectures parser and entropy decoding, intra-prediction and inverse quantization and transforms, which together compound a working version of an H.264 video decoder called intra-only. Besides these architectures, it is also physically implemented an architecture for a deblocking filter module and architectures for motion compensation according the Main and High profiles. This master thesis presents the standard-cells (ASIC) implementation as well as a detailed description of each step necessary to outcome the layouts of each of the architecture. It also presents the results of the implementations and comparisons with other works in the literature. The implementation of the filter has 43.9K gates (equivalent-gates), 42mW of power consumption and it demands the least amount of internal memory, 12.375KB SRAM, when compared with other implementations for the same video resolution, 1920x1080@30fps. The implementations for the Main and High profiles of the motion compensator have the best relationship between the amount of required clock cycles to interpolate a macroblock (MB), 304 cycles/MB, and the equivalent-gate count of each implementation, 98K and 102K, respectively. Also, the implementation of the H.264 intra-only decoder has 5KB SRAM, 11.4 mW of power consumption and it has the least equivalent-gate count, 150K, compared with other implementations of H.264 decoders which have similar features.