Three-dimensional (3D) displays project 3D images that give 3D perceptions and mimic real-world objects. Among the rich varieties of 3D displays, multiview displays take advantage of light’s various degrees of freedom and provide some of the 3D perceptions by projecting 2D subsampling of a 3D object. More 2D subsampling is required to project images with smoother parallax and more realistic sensation. As an additional degree of freedom with theoretically unlimited state space, orbital angular momentum (OAM) modes may be an alternative to the conventional multiview approaches and potentially project more images. This research involves exploring the possibility of encoding/decoding off-axis points in 2D images with OAM modes, development of the optical system, and design and development of a multiview colour display architecture. The first part of the research is exploring encoding/decoding off-axis points with OAM modes. Conventionally OAM modes are used to encode/decode the on-axis information only. Analysis of on-axis OAM beams referenced to off-axis points suggests representation of off-axis displacements as a set of expanded OAM components. At current stage off-axis points within an effective coding area are possible to be encoded/decoded with chosen OAM modes for multiplexing. Experimentally a 2D image is encoded/decoded with an OAM modes. When the encoding/decoding OAM modes match, the image is reconstructed. On the other hand, a dark region with zero intensity is shown. The dark region suggests the effective coding area for multiplexing. The final part of the research develops a multiview colour display. Based on understandings of off-axis representation of a set of different OAM components and experimental test of the optical system, three 1 mm monochromatic images are encoded, multiplexed and projected. Having studied wavelength effects on OAM coding, the initial architecture is updated to a scalable colour display consisting of four wavelengths.

Sweden is heading towards a larger portion of renewable, weather dependent energy sources as a part of climate policy. To integrate such energy sources there is an increasing demand of flexibility in the Swedish electricity system. This further indicates a need to understand the rationality behind investments in flexibility resources, such as energy storage and demand response. The purpose of this study is to investigate whether the measurement Levelised Cost of Storage (LCOS) is reflecting the way Swedish actors reason about investments in flexibility resources. By qualitative interviews with actors and calculations of LCOS in seven different use cases the investment logic related to energy storage is analysed in a Swedish context. By doing so this study aims to form a basis of how to encourage an effective utilization of the values that flexibility resources can provide. Investments in energy storage and demand response technology are in studied use cases driven by soft values as goodwill, knowledge and comfort. Possible economic savings are often the rational argument for an investment, however, a greater benefit accrue to network operators, technology suppliers, and most of all, the electricity system. Regulations regarding network operators’ required rate of return, ownership and bid requirements on the Swedish power regulation market are currently not promoting a transformation to a completely renewable energy system, in which flexibility resources are seen as presumptions. Soft values and system values are difficult to quantify, which aggravates an understanding of the investment rationality regarding energy storage and demand response in a Swedish context. Several actors pointed out power, primary to energy, as the deficient resource, which increases the problem to assess when investments will occur by using LCOS methodology.

The immersive virtual reality (VR) and the optical see-through augmented reality (AR) are expected to revolutionize human lives in work, education, entertainment, healthcare, spatial computing, and digital twins, just to name a few. Next-generation VR/AR devices should exhibit a wide field-of-view (FoV), crisp image without screen-door effect, high dynamic range, compact form factor and lightweight, and low power consumption. Such demanding requirements pose a significant challenge to traditional direct-view display panels. To address these technical challenges, novel approaches need to be proposed. This dissertation is devoted to developing next-generation high-performance display light engines toward high resolution density, high optical efficiency, wide color gamut, and small form factor. These emerging solutions will fuel the growth and accelerate the widespread applications of VR/AR devices. In Chapter 2, we propose practical measurement methods to characterize the halo artifacts of miniature light-emitting diode (mini-LED) backlit liquid crystal displays (LCDs). After measuring and characterizing a high dynamic range (HDR) light engine, we propose and develop field sequential color (FSC) LCDs for high-end virtual reality (VR) devices in Chapter 3. Such an FSC LCD can triple the resolution density and optical efficiency via eliminating color filters. To further mitigate the color breakup (CBU), we also propose to combine mini-LEDs with FSC LCDs to enable progressive emission and achieve a higher frame rate (~ 600 Hz). To quantitatively compare the CBUs corresponding to simultaneous emission, progressive emission, and stencil algorithm, we adopt the CIEDE2000 color difference as a metric. Quantitative simulation results of the CBU indicate that a 600-Hz subframe rate can help mitigate the CBU dramatically. Micro organic light-emitting diode (micro-OLED) exhibiting high-resolution density and high contrast ratio is another type of display for high-end VR devices. More specifically, white micro-OLED is currently employed because it helps ease the manufacturing difficulty. In Chapter 4, we optimize the layer thicknesses to achieve a maximum efficiency while keeping a decent color gamut. We also push the limit of color gamut toward ~ 95% Rec. 2020. Lastly, liquid-crystal-on-silicon (LCoS) offers great potential for achieving high-efficiency and high-resolution waveguide-based AR displays. In Chapter 5, several strategies are proposed and developed to improve the performance of LCoS microdisplays and enable a small pixel size. In Chapter 6, we briefly summarize our major accomplishments.

No description available.

Response of flexible structures — such as cable-supported bridges and aircraft wings — is associated with a number of uncertainties in structural and flow parameters. This thesis is aimed at efficient uncertainty quantification in a few such flow and flow-induced structural response problems. First, the uncertainty quantification in the lift force exerted on a submerged body in a potential flow is considered. To this end, a new method — termed here as semi-intrusive stochastic perturbation (SISP) — is proposed. A sensitivity analysis is also performed, where for the global sensitivity analysis (GSA) the Sobol’ indices are used. The polynomial chaos expansion (PCE) is used for estimating these indices. Next, two stability problems —divergence and flutter — in the aeroelasticity are studied in the context of reliability based design optimization (RBDO). Two modifications are proposed to an existing PCE-based metamodel to reduce the computational cost, where the chaos coefficients are estimated using Gauss quadrature to gain computational speed and GSA is used to create nonuniform grid to reduce the cost even further. The proposed method is applied on a rectangular unswept cantilever wing model. Next, reliability computation in limit cycle oscillations (LCOs) is considered. While the metamodel performs poorly in this case due to bimodality in the distribution, a new simulation-based scheme proposed to this end. Accordingly, first a reduced-order model (ROM) is used to identify the critical region in the random parameter space. Then the full-scale expensive model is run only over a this critical region. This is applied to the rectangular unswept cantilever wing with cubic and fifth order stiffness terms in its equation of motion. Next, the wind speed is modeled as a spatio-temporal process, and accordingly new representations of spatio-temporal random processes are proposed based on tensor decompositions of the covariance kernel. These are applied to three problems: a heat equation, a vibration, and a readily available covariance model for wind speed. Finally, to assimilate available field measurement data on wind speed and to predict based on this assimilation, a new framework based on the tensor decompositions is proposed. The framework is successfully applied to a set of measured data on wind speed in Ireland, where the prediction based on simulation is found to be consistent with the observed data.

As intermittent renewable energy sources such as wind and solar power gradually increase around the world, older technologies such as nuclear power is phased out in Sweden and many other countries. It is then important to ensure that the total power need is secured, and that the power grid can remain stable. One way of managing intermittent renewables is by using energy storage. The main goal of this thesis was to compare energy storage methods and their costs. A secondary aim was to investigate how the cost of developing more renewable energy sources, in combination with different energy storage methods, compares to erecting new nuclear power. This thesis was limited to three energy storage technologies, namely pumped hydro storage (PHS), compressed air energy storage (CAES), and four battery storage technologies. They were combined with wind power in the cost analysis. The comparison was done by performing a literature review and economical calculations, which focused especially on levelized cost of storage (LCOS). The results from the economic calculations indicated that PHS and CAES had lower LCOS than battery storage technologies. Similar results could be seen in the literature review as well. When comparing levelized cost of energy (LCOE) nuclear power had the lowest, €0.03-0.12 kWh-1, followed by wind power in combination with PHS and CAES, both around €0.07-0.24 kWh-1. This result was maintained also at sensitivity analysis regarding the discount rate, which both nuclear power and PHS proved rather sensitive to. Keywords: energy storage, nuclear power, wind power, pumped hydro storage, compressed air energy storage, battery energy storage, levelized cost of energy, Sweden

Die vorliegende Arbeit beschäftigt sich mit dem Konzept der radial nicht-oszillierenden, zeitlich stabilen ultrakurzen Bessel ähnlichen Strahlen oder "Nadelstrahlen" ("needle beams"), die zu einer Klasse von optischen hochlokalisierten Wellenpaketen generalisiert werden. Hierbei wird die Theorie über das räumlich-zeitlichen Ausbreitungsverhaltens von nicht auseinanderdriftenden Nadelstrahlen mit Pulsdauern von kleiner als 10 fs näher diskutiert. Dies wird durch eine systematische Darstellung der Methoden zur Generierung und Detektierung von lokalisierten Wellen komplettiert, die ein optischen Drehmoment tragen. Für die Erzeugung von HLWs kommen räumliche Lichtmodulatoren zum Einsatz, die ein flexibles Zuschneiden von Wellenpaketen mit der Dauer weniger Zyklen des EM-Feldes erlauben. Es wird gezeigt, dass solche optischen Pulse sich über beträchtliche Entfernungen ausbreiten, ohne dass sich dabei signifikant der Strahldurchmesser vergrößert oder der Puls zeitlich verbreitert. In variabler Weise werden verschiedene geometrische (z.B. ringförmige) Lichtverteilungen erzeugt. Anwendungspotential findet sich insbesondere in den Techniken der räumlichen Pulsformung und Diagnostik. Als besonders wichtiger Ansatz ist der Zeit-Wellenfront-Sensor zu erwähnen, welcher die nichtlineare, mehrkanalige Autokorrelation, die Wellenfrontdetektion mittels nichtdiffraktiver Teilstrahlen nach dem Shack-Hartmann-Prinzip und eine adaptive Funktionalität miteinander vorteilhaft verbindet. Das enorme Potential solcher Ansätze wird durch die hohe Genauigkeit orts-, winkel- und zeitabhängiger Rekonstruktionen der Wellenpakete nachgewiesen. Darüber hinaus ermöglicht das räumliche Kodieren und anschließende Verfolgen der Teilstrahlen eine wesentliche Verbesserung der Identifikation relevanter Parameter von Verteilungsfunktionen. Schließlich werden erste Schritte zur experimentellen Generation von optischen "light bullets" mit ganzzahligen und fraktalen orbitalen Drehmomenten präsentiert. / This thesis deals with the concept of radially non-oscillating, temporally stable ultrashort-pulsed Bessel-like beams or "needle pulses", which are an example of a highly localized wave packet (HLW). HLWs are the closest approximation of linear-optical light bullets and provide specific benefits compared to conventional Gaussian-like light bullets. The spatio-temporally nonspreading propagation behavior of few-cycle needle beams of less than 10 fs duration will be theoretically discussed in detail. An overview of the generation and detection of localized waves carrying an orbital angular momentum is also given. High fidelity spatial light modulators are used for the generation of HLWs. The flexible tailoring of few-cycle wave packets at near-infrared wavelengths is reported. It is shown that such pulses propagate over a huge depth of focus, neither significantly changing their spot size or nor the pulse duration. Variable geometrical distributions like circular disks, rings, or bars of light are shaped and exploited as building blocks for structures of higher complexity. Another section of the thesis emphasizes the numerous potential applications of related techniques for an optimized two-dimensional spatial pulse shaping and diagnostics (reduce ambiguities) based on localized waves. As a particularly important example, time-wavefront sensing is used to combine nonlinear multichannel autocorrelation with Shack-Hartmann wavefront sensing by means of localized sub-beams and adaptive functionality. The capabilities of such devices are illustrated by the results of angular and temporal mapping of few-cycle wave packets. Moreover, spatial encoding and subsequent tracking of individual sub-beams, even at incident angles of up to 50°, enables to significantly improve the spot recognition. Finally, first steps towards the generation of optical light bullets carrying integer or non-integer orbital angular momenta are presented.