Made available in DSpace on 2014-06-11T19:23:26Z (GMT). No. of bitstreams: 0 Previous issue date: 2009-07-31Bitstream added on 2014-06-13T18:09:34Z : No. of bitstreams: 1 zanatta_cs_me_bauru.pdf: 2567546 bytes, checksum: b92343b4c48fcdf306ed6a95bf902804 (MD5) / Materiais nanoestruturados vêm sendo amplamente estudados pela comunidade científica, devido às suas propriedades únicas obtidas com o controle da síntese dos materiais. Por meio do controle experimental, esses materiais podem ser utilizados em numerosas áreas, tais como na eletrônica e na fotônica. Dentre os vários métodos químicos, o processo poliol vem sendo utilizado devido à fácil obtenção de nanopartículas de óxidos e metais na sua forma elementar. O presente trabalho teve como objetivo a síntese do óxido de zinco nanoestruturado por meio do método poliol. Diferentes precursores metálicos, tais como acetato de zinco dihidratado, nitrato de zinco hexahidratado, sulfato de zinco monohidratado e cloreto de zinco anidro e diferentes tempos de permanência da síntese foram utilizados para verificar possíveis interferências dos ânions precursores na síntese e na morfologia do óxido de zinco quando obtido. Os materiais obtidos das sínteses foram caracterizados por difração de raios X (DRX), análises térmicas (TG/DTA), medidas de adsorção de gás nitrogênio, microscopia eletrônica de varredura (MEV), microscopia eletrônica de varredura de alta resolução (MEV-FEG) e cronopotenciometria. Por meio destas técnias mostrou-se a viabilidade da obtenção do óxido de zinco nanoestruturado dd maneira direta a partir do acetato de zinco, através de refluxo em etilenoglicol por 2, 4 e 8 horas seguido de lavagem e centrifugação. A menor nanoestrutura encontrada apresentou partículas com dimensão de aproximadamente 25 nm e formato poliédrico, as quais foram observadas pelo FEG. A técnica de cronopotenciometria, representada por meio das curvas de carga/descarga mostraram que a utilização do compósito contendo o óxido de zinco sintetizado apresenta melhores resultados quando comparados ao uso... / Nanostructered materials have been extensively studied by the scientific community due to their unique properties obtained by controlled synthesis of materials. By means of the control of parameters, this new materials can be used in a number of applications in electronic and photonic technology. Among the several methods to obtain nanoparticles or nanostructured materials, the polyol method has been applied because it shows easy procedures to produce nanostructured oxides and elemental metals. The aim of this work is the synthesis of nanostructured zinc oxide, one of the most multifunctional oxides, by the polyol method. Different precursors salts like zinc acetate dihydrate, zinc nitrate hexahydrate, zinc sulfate monohydrate and zinc chloride anhydrate, as well as several times of reflux, were used to investigate the influence of the precursos anions on the synthesis and on the morphology of the crystals of zinc oxide whenever produced. The obtained powders were characterized by X-ray diffraction (DRX), thermal analyses (TG/DTA), and measurements of 'N IND. 2' gas adsorption, scanning electronic and field emission microscopy (MEV and FEG) and chronopotentiometry. These techniques showed the possibility of producing nanostructured zinc oxide in direct way from the reflux in etylenglycol for 2, 4 and 8 hours, followed by washing and centrifugation. The smallest nanostructure observed by FEG presented around 25 nm polyhedral particles. The chronopotentiometry, present charge/discharge curves showing better results for the electrode made of polimer composite containing ZnO nanoparticles than the obtaining results for the oxide alone. The best results showed reversibility of the lithium-ion cell upon 20 cycles, applying 3 μΑ electric current and showing a charge potential up to 4.2 V.

No description available.

Neste trabalho, foi desenvolvido um material híbrido inédito carvão ativado/nanotubos de carbono/nanopartículas de prata para as aplicações em bateria de íons de lítio e capacitor eletroquímico de dupla camada. O compósito foi preparado por crescimento dos nanotubos de carbono diretamente sobre o carvão ativado via deposição química de vapor e depois nanopartículas de prata foram incorporadas no carvão ativado/nanotubos de carbono. A morfologia do compósito foi analisada por microscopia eletrônica de varredura. Investigação das propriedades de intercalação de lítio no carvão ativado (CA), carvão ativado/nanotubos de carbono (CA/NTC), carvão ativado/prata (CA/Ag) e carvão ativado/nanotubos de carbono/prata (CA/NTC/Ag) foi conduzida por voltametria cíclica e ciclos de carga/descarga, utilizando dois diferentes eletrólitos. Verificou-se que o ânodo de CA/NTC/Ag apresenta mais elevado valor de capacidade específica reversível que a grafita em eletrólito comercial, provavelmente devido à rede tridimensional com elevada condutividade eletrônica formada por nanotubos de carbono e nanopartículas de prata nos poros e nas rugosidades do substrato. Além disso, os nanotubos de carbono podem exibir elevada capacidade de armazenamento de lítio. Outra vantagem do CA/NTC/Ag é que a rede de nanotubos de carbono acomoda a expansão de volume das partículas de prata durante a ciclagem do eletrodo, mantendo-as bem adsorvidas na superfície do CA/NTC. Os resultados confirmaram a existência do sinergismo entre os componentes do CA/NTC/Ag, que promove características eletroquímicas superiores àquelas dos constituintes isolados. / In this work, an unpublished hybrid material activated carbon/carbon nanotubes/silver nanoparticles was developed for lithium ion battery and electrochemical double layer capacitor applications. The composite was prepared by growing carbon nanotubes directly on the activated carbon via chemical vapor deposition and after silver nanoparticles were incorporated on the activated carbon/carbon nanotubes. The composites morphology was analyzed by scanning electron microscopy. Investigation of lithium intercalation properties in activated carbon (AC), activated carbon/carbon nanotubes (AC/CNT), activated carbon/silver (AC/Ag) and activated carbon/carbon nanotubes/silver (AC/CNT/Ag) was carried out by cyclic voltammetry and charge/discharge cycles by making use of two different electrolytes. It was found that the AC/CNT/Ag anode presents higher reversible specific capacity value in comparison with graphite in commercial electrolyte, probably due to the three dimensional network with high electronic conductivity formed by carbon nanotubes and silver nanoparticles in the substrates pores and roughness. Furthermore, carbon nanotubes can exhibit high lithium storage capacity. Another advantage of the AC/CNT/Ag is that the network of carbon nanotubes accommodates volume expansion of the silver particles during electrode cycling, keeping them well adsorbed on the surface of the AC/CNT. The results confirmed the existence of synergism between the components of the AC/CNT/Ag, which promotes electrochemical characteristics that are higher than those of the individual constituents.

Materiais auto-organizados constituídos de V2O5 xerogel, poli(etilenoimina) (PEI) e nanopartículas de carbono (NpCs) foram obtidos por meio da técnica camada-por-camada (LbL). A metodologia aplicada permitiu a obtenção de filmes finos com elevado controle de espessura além de permitir um crescimento linear dos filmes, denominados neste trabalho V2O5/PEI e V2O5/PEI/NpCs. Além disso, o desempenho eletroquímico dos materiais auto-organizados foi comparado a um eletrodo de V2O5. Análises de FTIR mostraram que interações específicas entre os grupos amina do PEI e os grupos carboxila do V2O5 são responsáveis pelo crescimento do filme. Estas interações permitem a formação de um campo eletrostático capaz de blindar as interações entre os íons lítio e os oxigênios da vanadila (V=O) e, por consequência, são responsáveis pelo aumento na mobilidade iônica dos íons lítio no interior da matriz hospedeira e, portanto, um aumento na capacidade de armazenamento de carga. Resultados obtidos através de medidas de carga/descarga mostram que o V2O5/PEI/NpCs apresenta uma melhor desempenho do que os demais materiais estudados neste trabalho. Estes resultados mostram que a capacidade específica do V2O5/PEI/NpCs foi de 137 mA h g-1 para a menor densidade de corrente aplicada e aproximadamente 1,6 vezes maior do que os valores de capacidade específica para os outros materiais para a maior densidade de corrente aplicada. Além disso, estas medidas permitiram a observação de uma menor variação na razão estequiométrica máxima (xmáx) em função das densidades de corrente aplicadas para os filmes auto-organizados, fato este relacionado a uma maior mobilidade iônica dos íons lítio no interior dessas matrizes. Os resultados obtidos a partir de espectroscopia de impedância eletroquímica (EIS) mostraram que a difusão dos íons lítio no interior das matrizes auto-organizadas é maior do que no caso do V2O5, cujos valores do coeficiente de difusão foram de 1,64 x 10-15, 1,21 x 10-14 e 2,26 x 10-14 cm2 s-1 para os filmes V2O5, V2O5/PEI e V2O5/PEI/NpCs, respectivamente. Sendo assim, o polímero e as NpCs promoveram novos caminhos condutores e permitiram a conexão elétrica entre camadas isoladas da matriz V2O5. Dessa forma, novos nanocompósitos foram obtidos visando demonstrar o método de auto-organização empregado para melhorar o transporte de carga em matrizes hospedeiras. / Self-assembled materials constituted of V2O5 xerogel, poly (ethyleneimine) (PEI), and carbon nanoparticles (CNPs) were obtained by the layer-by-layer (LbL) technique. The applied methodology permitted the obtainment of thin films with high thickness control and also permitted a linear growth of the films, which will be named V2O5/PEI and V2O5/PEI/CNPs. Besides, the electrochemical performance of the self-assembled materials was compared to a V2O5 electrode. FTIR analyses showed that the specific interactions between the amine groups of PEI and the vanadyl groups of the V2O5 are responsible for the film growth. These interactions permitted the formation of an electrostatic shield capable of hindering the interactions between the lithium ions and the vanadyl oxygen atoms (V=O) and are consequently responsible for the enhancement on the ionic mobility of the lithium ions within the host matrix, leading to a higher energy storage capability. Results obtained by the charge/discharge measurements showed that V2O5/PEI/CNPs presents a better performance than the other materials studied for this research. These results demonstrated that the specific capacity of the V2O5/PEI/CNPs was 137 mA h g-1 under the lowest current density applied and approximately 1.6 times higher than the specific capacity values obtained for the other materials under the highest current density applied. Moreover, it was observed that the variation of the maximum stoichiometric ratio (xmax) as a function of the current density is lower for the self-assembled materials than for the V2O5 electrode, which can be related to the higher ionic mobility of the lithium ion within the self-assembled materials. Electrochemical Impedance Spectroscopy (EIS) data demonstrated that the diffusion of the lithium ions within the self-assembled materials is higher than within the V2O5 electrode, and the diffusion coefficients were 1.64 x 10-15, 1.21 x 10-14 e 2.26 x 10-14 cm2 s-1 for V2O5, V2O5/PEI and V2O5/PEI/CNPs, respectively. Thus, the polymer and the CNPs provided new conducting pathways and connected isolated V2O5 chains in the host matrix. Therefore, novel spontaneous nanocomposites were formed, aiming to demonstrate the self-assembled method adopted for improving charge transport within host matrices.

This thesis is interested in new materials for lithium – ion batteries. Two different samples were investigated, one intercalation and one conversion cathode material. The theoretical part is focused to the structure of cells, their advantages and disadvantages compared to other secondary batteries. Also other materials used in batteries are described. The practical part describes the preparation of cathode materials for subsequent testing by scanning elektron microscopy and thermogravimetric analysis. In conclusions two different materials were evaluated and compared with each other.

Rechargeable lithium-ion batteries are now attracting great attention for applications in portable electronic devices and electrical vehicles, because of their high energy density, long cycle and great convenience. For new generations of rechargeable lithium-ion batteries, they applied not only to consumer electronics but also especially to clean energy storage and hybrid electric vehicles. Therefore, further breakthroughs in electrode materials that open up a new important avenue are essential. Graphite, the most commonly used commercial anode material, has a limited reversible lithium intercalation capacity (372 mAh g-1). In this regard, tremendous efforts have been made towards even further improving high capacity, excellent rate capability, and cycling stability by developing advanced anode materials. This work focuses on the lithium storage properties of nickel oxide (NiO) and germanium (Ge) nanomembranes anodes mainly fabricated by electron-beam evaporation. Specifically, NiO is selected for conversion-type material because of high theoretical specific capacity of 718 mAh g-1 and easily obtained material. The resultant curved NiO nanomembranes anodes exhibit ultrafast power rate of 50 C (1 C = 718 mA g-1) and good capacity retention (721 mAh g-1, 1400 cycles). Remarkably, multifunctional Ni/NiO hybrid nanomembranes were further fabricated and investigated. Benefiting from the advantages of the intrinsic architecture and the electrochemical catalysis of metallic nickel, the hybrid Ni/NiO anodes could be tested at an ultrahigh rate of ~115 C. With Ge as active alloying-type material (1624 mAh g-1), the effect of the incorporated oxygen to the lithium storage properties of amorphous Ge nanomembranes is well studied. The oxygen-enabled Ge (GeOx) nanomembranes exhibit improved electrochemical properties of highly reversible capacity (1200 mAh g-1), and robust cycling performance.

Die vorliegende Arbeit liefert einen Beitrag für ein besseres Verständnis über die zyklische Alterung von Siliciumnanopartikel (Si-NP) als Anodenmaterial in Lithium-Ionen- und Lithium-Schwefel-Batterien. Im Fokus der Studie stand der Einfluss der Partikelgröße, des Elektrodendesigns und der Elektrolytzusammensetzung auf die elektrochemische Reversibilität des Siliciums zur Lithiumspeicherung. Über umfangreiche strukturelle Charakterisierungstechniken mittels Röntgenbeugung, Elektronenmikroskopie und der Röntgenphotoelektronenspektroskopie in Verbindung mit elektrochemischen Untersuchungsmethoden, konnten wesentliche Mechanismen zur Degradation aufgeklärt und die Funktion diverser Oberflächenverbindungen auf der Siliciumanode identifiziert werden. Als Hauptursache der Degradation von Si-NP mit einer Partikelgröße unter 20 nm konnte das Wachstum der Solid-Electrolyte-Interface (SEI) identifiziert werden. Pulverisierung und die Bildung neuer kristalliner Phasen kann ausgeschlossen werden. Es wurde ein kostengünstiges und flexibles Verfahren zur Herstellung eines nanostrukturierten Silicium-Kohlenstoff-Komposites entwickelt, welches unter optimierten Bedingungen eine spezifische Kapazität von 1280 mAh/g(Elektrode) und einen Kapazitätserhalt von 81 % über 500 Tiefentladungszyklen liefert. Es konnten erfolgreich hoch reversible Flächenkapazitäten von 5 mAh/cm^2 bei nur 4,4 mg/cm^2 Elektrodengewicht nachgewiesen werden. Für die Arbeit wurde zunächst ein Verfahren zur Herstellung von monodispersen Si-NP mit einer Größe von 5 nm – 20 nm angewendet. Die galvanostatische Zyklierung gegen Lithiummetall hat ergeben, dass mit abnehmender Partikelgröße die Reversibilität des Siliciums zunimmt. Über in situ Synchrotron XRD und post mortem XPS konnte eine stabilere Solid-Electrolyte-Interface (SEI) mit abnehmender Partikelgröße als Hauptursache identifiziert werden. Im weiteren Verlauf der Arbeit wurden Si-NP im porösen Kohlenstoffgerüst durch ein leicht modifiziertes Herstellungsverfahren abgeschieden und untersucht. Durch das veränderte Elektrodendesign konnte die Reversibilität bei gleichem Kohlenstoffgehalt deutlich verbessert werden, da der Kontaktverlust des Siliciums zum leitfähigen Gerüst durch SEI Wachstum verzögert wird. Die Elektrolytadditive Fluoroethylencarbonat und Vinylencarbonat führen zu einer weiteren Verbesserung der Reversibilität, wobei Vinylencarbonat die höchste Reversibilität zur Folge hat, jedoch einen hohen Filmwiderstand verursacht. Weiterhin wurden etherbasierte Elektrolyte, welche typischerweise in Lithium-Schwefel-Batterien zum Einsatz kommen, untersucht. Hierbei wurde eine positive Wirkung von Lithiumnitrat auf die Reversibilität von Silicium festgestellt. Es konnten erfolgreich Si-Li-S (SLS) Vollzellen getestet werden, welche eine höhere Lebensdauer als vergleichbare Zellen mit Lithiummetall als Anode aufweisen. Aus den elektrochemischen und post mortem Untersuchungen konnte ein positiver Einfluss von Polysulfiden auf die SEI von Silicium nachgewiesen werden. Durch die umfangreichen post mortem Analysen konnte die Funktion diverser, in der SEI des Siliciums auftretender Verbindungen in Abhängigkeit der Elektrolytzusammensetzung aufgeklärt werden. Es wurde ein anschaulicher Mechanismus des SEI Wachstums in Abhängigkeit des Elektrolyts erstellt. / The results of this work provide a better understanding about the cyclic aging of silicon nanoparticles (Si-NP) as anode material in Lithium-ion- and Lithium-sulfur batteries. Subject of investigation was the influence of particle size, electrode design and electrolyte composition on the electrochemical reversibility of Si-NP for lithium storage. The main characterization techniques used in this study were XRD, SEM, TEM and XPS combined with electrochemical analysis and in situ synchrotron XRD. Bare silicon nanoparticles ranging from 5 – 20 nm and silicon nanoparticles embedded within a porous carbon scaffold were prepared through a cost-effective and novel synthesis technique including the hydrolysis of trichlorosilane as feedstock. The dominant degradation mechanism of these silicon nanoparticles was identified to be the continuous growth the solid-electrolyte-interphase (SEI). Other phenomena such as pulverisation or new evolving crystalline phases are excluded. It was found that a reduction of the particle size from 20 nm to 5 nm increases the reversibility due to a thicker and therewith more stable SEI. The deposition of the silicon nanoparticles into a porous carbon scaffold caused a significant improvement of the reversibility at constant carbon content. The effect of the electrolyte additives Fluoroethylene carbonate and Vinylene carbonate was analysed in detail. Furthermore, typical electrolyte compositions used for lithium-sulfur-batteries were tested and studied. Si-Li-S (SLS) full cells were demonstrated which outperform conventional lithium-sulfur batteries in terms of life time. The systematic analysis and the rational optimization process of the particle size, electrode design and electrolyte composition allowed to provide a nanostructured silicon electrode with a specific capacity of up to 1280 mAh/g(Electrode) and 81 % capacity retention after 500 deep discharge cycles. Reversible areal capacities of 5 mAh/cm^2 at 4.4 mg/cm^2 electrode weight were demonstrated.

Plusieurs structures hiérarchisées des fluorures de fer et de nickel avec des matrices carbonées ou métalliques ont été obtenues par deux voies de fluoration : fluoration gaz-solide de nanoparticules par le fluor moléculaire pur ou par fluoration en milieu liquide via l’agent fluorant NH 4 F. Les différentes nanostructures des matériaux ainsi préparées ont été caractérisées par les techniques classiques de microscopies électroniques, de spectroscopies vibrationnelles (infrarouge et Raman) ou encore d’analyse thermogravimétrique. En complément, la diffraction des rayons X a permis d’étudier les matériaux tant à l’ordre global, qu’à l’ordre local par affinement et analyse PDF sous rayonnement synchrotron. Ainsi, les conditions de synthèse et les mécanismes de formation de différents assemblages de type 0D avec des structures core-shell nickel/fluorure de nickel ; mais aussi 1D avec des nanotubes de carbone double parois remplis par du fluorure de fer, ou encore 3D (« flower-like ») avec le greffage de nanoparticules de fluorures de nickel en surface de nanotubes de carbone simple ou multi parois ont pu être appréhendés. Finalement, les nanostructures les plus adaptées à la diffusion des ions lithium (particules core-shell et flower-like) ont finalement été testées comme matériaux de cathode. / Some hierarchized structures made of iron or nickel fluorides together with carbonaceous or metallic matrix were obtained owing to two fluorination ways : solid-gas fluorination proceeding by pure molecular fluorine gas or fluorination in liquid media using NH 4 F in solution. The different nanostructures have been characterized thanks to classical technics such as electronic microscopies, vibrational spectroscopies (infrared and Raman) or thermogravimetric analysis. Many attentions have been paid to determine the global and local structures by using X-ray diffraction, refinement of the diffraction pattern by Rietveld analysis or Pair Distribution Function analysis on pattern registered on synchrotron. So, the synthesis conditions and the formation mechanism of various assemblies have been carried out on 0D core-shell nickel/ nickel fluoride, 1D double-walled carbon nanotubes filled with iron fluoride or 3D single and multi-walled carbon nanotubes decorated with flower-like nickel fluoride. Finally, the nanostructures the most favorable to lithium-ion diffusion (core-shell and flower like nanostructures) have been used as electrode in secondary lithium batteries.

En raison de leurs performances en termes de densités énergétiques et de puissance, les batteries Li-ion sont les systèmes de stockage électrique privilégiés pour les nouvelles générations de véhicules électriques. Leur modélisation est indispensable pour fournir une évaluation de leurs performances tout au long de leur durée de vie tout en limitant le nombre d'essais expérimentaux, et ceci dans le but de concevoir des configurations et des gestions optimales des packs batteries pour une application envisagée. Le but de ce travail consiste à proposer un modèle physique capable de prédire le comportement et le vieillissement de la batterie sous différentes conditions. Un modèle simplifié électrochimique et thermique capable de prédire le comportement physicochimique et le vieillissement de batteries Li-ion a été étudié. Une analyse de sensibilité a été menée sur l'ensemble des paramètres du modèle dans différentes conditions afin de mettre en évidence leurs influences sur les sorties du modèle. Sur cette base, une méthode d'identification a été proposée pour préserver une indépendance des résultats de l'identification paramétrique par rapport à la sensibilité des paramètres. Cette méthode a permis d'améliorer les prédictions de vieillissement avec des estimations très proches des résultats expérimentaux. Au-delà des gains en compréhension et prédiction, ce modèle physique ouvre de nouvelles possibilités pour établir des protocoles de vieillissement accélérés. / Due to their high power and energy densities, Li-ion batteries are the leading systems for the new generations of electric vehicles, for which an optimum cell design, management and configuration is essential. Modeling provides tools to perform complex analysis of the performance of Li-ion batteries and reduces the amount of time spent on experimental testing. The aim of our research is to propose a physics-based model that can predict battery behavior and aging under various conditions during the entire lifespan. A simplified electrochemical and thermal model that can predict both physicochemical and aging behaviors of Li-ion batteries has been studied. A sensitivity analysis of all its physical parameters has been performed in order to find out their influence on the model outputs based on simulations under various conditions. The results gave hints on whether a parameter needs particular attention when measured or identified and on the conditions under which it is the most sensitive. A specific simulation profile has been designed for parameters involved in aging equations in order to determine their sensitivity. Finally, a step-wise method has been followed to limit the influence of parameter values when identifying sorne of them. This sensitivity analysis and the subsequent step-wise identification method show very good results, such as a better fitting of the experimental data with simulated cell voltage. Beyond advanced comprehension and prediction, this physical model opens new possibilities to define accelerated aging tests.

A Comprehensive review of literature on electrode materials for lithium-ion batteries is provided in Chapter 1 of the thesis. Chapter 2 deals with the studies on porous, sub-micrometer size LiNi1/3Co1/3O2 as a positive electrode material for Li-ion cells synthesized by inverse microemulsion route and polymer template route. The electromechanical characterization studies show that carbon-coated LiNi1/3Co1/3O2 samples exhibit improved rate capability and cycling performance. Furthermore, it is anticipated that porous LiNi1/3Co1/3O2 could be useful for high rates of charge-discharge cycling. Synthesis of sub-micrometer size, porous particles of LiNi1/3Co1/3O2 using a tri-block copolymer as a soft template is carried out. LiNi1/3Co1/3O2 sample prepared at 900ºC exhibits a high rate capability and stable capacity retention of cycling. The electrochemical performance of LiNi1/3Co1/3O2 prepared in the absence of the polymer template is inferior to that of the sample prepared in the presence of the polymer template. Chapter 4 involves the synthesis of sub-micrometer size particles of LiMn2O4 in quaternary microemulsion medium. The electrochemical characterization studies provide discharge capacity values of about 100 mAh g-1 at C/5 rate and there is moderate decrease in capacity by increasing the rate of charge-discharge cycling. Studies also include charge-discharge cycling as well as ac impedance studies in temperature range from -10 to 40º C. Chapter 5 reports the synthesis of nano-plate LiFePO4 by polyol route starting from two reactants, namely, FePO42H2O and LiOH.2H2O. The electrodes fabricated out of nano-plate of LiFePO4 exhibit a high electrochemical activity. A stable capacity of about 155 mAh g-1 is measured at 0.2 C over 50 charge-discharge cycles. Mesoporous LiFePO4/C composite with two sizes of pores is prepared for the first time via solution-based polymer template technique. The precursor of LiFePO4/C composite is heated at different temperatures in the range from 600 to 800ºC to study the effect of crystalllinity, porosity and morphology on the electrochemical performance. The compound obtained at 700ºC exhibits a high rate capability and stable capacity retention on cycling with pore size distribution around 4 and 46nm. In Chapter 6, the electrochemical characterization of LiMn2O4 in an aqueous solution of 5 M LiNO3 is reported. A typical cell employing LiMn2O4 as the positive electrode and V2O5 as the negative electrode was assembled and the characterized by charge-discharge cycling in 5 M LiNO3 aqueous electrolyte. Furthermore, it is shown that Li+-ion in LiMn2O4 can be replaced by other divalent ions resulting in the formation of MMn2O4 (M = Ca, Mg, Ba and Sr) in aqueous M(NO3)2 electrolytes by subjecting LiMn2O4 electrodes to cyclic voltametry. Cyclic voltammetry and chronopotentiometry studies suggest that MMn2O4 can undergo reversible redox reaction by intercalation/deintercalation of M2+-ions in aqueous M(NO3)2 electrolytes.