Spelling suggestions: "subject:"flownoise amplifier"" "subject:"fornoise amplifier""
31 |
Conception de circuits intégrés radiofréquences reconfigurables en technologie FD-SOI pour application IoT / Design of tunable radiofrequency blocks in FD-SOI technology for IoT applicationsDesèvedavy, Jennifer 08 October 2018 (has links)
La pénétration importante d’objets communicants dans notre vie quotidienne révèle des défis important quant à leur développement. Notamment l’explosion d'applications multimédia sans fil pour l'électronique grand public fait de la consommation électrique une métrique clef dans la conception des dispositifs portables multimodes sans fil. Les émetteurs-récepteurs conventionnels proposent des performances fixes et sont conçus pour respecter ces hautes performances dans toutes les conditions de communication sans fil. Cependant, la plupart du temps, le canal n'est pas dans le pire cas de communication et ces émetteurs-récepteurs sont donc surdimensionnés. En connaissant l’état du canal en temps réel, de tels dispositifs pourraient s'adapter aux besoins et réduire significativement leur consommation électrique. Le défi consiste à respecter la Qualité de Service , ou Quality of Service (QoS) en anglais, imposée par les différents standards de communication. Afin de rester compétitifs, les émetteurs-récepteurs adaptatifs doivent donc proposer une même QoS que ceux déjà disponibles sur le marché. Ainsi, ni la portée de communication ni le temps de réponse ne peuvent être dégradés.Basé sur ces exigences, cette thèse propose une technique d'adaptation pour la conception d'un récepteur reconfigurable qui fonctionne à la limite des performances nécessaires pour recevoir le signal utile. Ainsi, le récepteur proposé est toujours au minimum de consommation électrique tout en garantissant la bonne QoS. Ceci permet alors de multiplier la durée de vie de sa batterie par un facteur 5.Cette adaptabilité est démontrée ensuite côté circuit par la conception d'un LNA (Amplificateur Faible Bruit) dont les performances sont reconfigurables. En effet, en tant que premier élément de la chaîne de réception, le LNA limite le récepteur en termes de sensibilité. Ces travaux exploitent la technologie FD-SOI (Fully Depleted Silicon-On-Insulator) pour d’une part, réduire la consommation du LNA et d’autre part, ajouter de la reconfigurabilité à ce même circuit. / Communicating objects are inviting themselves into daily life leading to digitization of the physical world. This explosion of multimedia wireless applications for consumer electronics makes the power consumption a key metric in the design of multi-mode wireless portable devices. Conventional transceivers have fixed performances and are designed to meet high performances in all wireless link conditions. However, most of the time, the channel of communication is not at worst case and these transceivers are therefore over specified. Being aware of the channel link conditions would allow such devices to adapt themselves and to reduce significantly their power consumption. Therefore, the challenge is to propose a QoS (Quality of Service) in terms of communication range, response time as instance, equivalent to industrial modules with a reduced overall power consumption.To address this purpose, this thesis proposes a design strategy for the implementation of adaptive radio-frequency receiver (Rx) modules. Hence the Rx front end achieves the correct QoS for various scenarii of communications with a minimum of power consumption.As a proof of concept, the adaptive approach is demonstrated with the design of a tunable LNA (Low Noise Amplifier). As the first element of the receiver chain, the LNA limits the receiver in terms of sensitivity and is therefore a good candidate to perform reconfiguration. The body biasing of the FD-SOI (Fully Depleted Silicon-On-Insulator) technology is first exploited to reduce the power consumption of a circuit and then as an opportunity to perform circuit tunability.
|
32 |
Monolithic microwave integrated circuit (MMIC) low noise amplifier (LNA) design for radio astronomy applicationsSeyfollahi, Alireza 30 April 2018 (has links)
The presentation highlights research on theory, design, EM
modeling, fabrication, packaging, and measurement of GaAs Monolithic
Microwave Integrated Circuits (MMICs). The goal of this work is to design MMIC LNAs with low noise figure, high gain, and wide bandwidth.
The work aims to develop GaAs MMIC LNAs for the application of RF front-end receivers in radio telescopes. GaAs MMIC technology offers modern radio astronomy attractive solutions based on its advantage in terms of high operational frequency, low noise, excellent repeatability and high integration density. Theoretical investigations are performed,
presenting the formulation and graphical methods, and focusing on a
systematic method to design a low noise amplifier for the best noise,
gain and input/output return loss. Additionally, an EM simulation method is utilized and successfully applied to MMIC designs. The effect of packaging including the wire bond and chassis is critical as the frequency increases. Therefore, it is modeled by full-wave analysis where the measured results verify the reliability of these models. The designed MMICs are validated by measurements of several prototypes,
including three C/X band and one Q band MMIC LNAs. Moreover, comparison
to similar industrial chips demonstrates the superiority of the proposed
structures regarding bandwidth, noise and gain flatness, and making them
suitable for use in radio astronomy receivers. / Graduate / 2020-05-01
|
33 |
Design of Tunable Low-Noise Amplifier in 0.13um CMOS Technology for Multistandard RF TransceiversKhlif, Wassim 04 May 2007 (has links)
The global market of mobile and wireless communications is witnessing explosive growth in size as well as radical changes. Third generation (3G) wireless systems have recently been deployed and some are still in the process. 3G wireless systems promise integration of voice and data communications with higher data rates and a superior quality of service compared to second generation systems. Unfortunately, more and more communication standards continue to be developed which ultimately requires specific RF/MW and baseband communication integrated circuits that are designed for functionality and compatibility with a specific type of network. Although communication devices such as cellular phones integrate different services such as voice, Bluetooth, GPS, and WLAN, each service requires its own dedicated radio transceiver which results in high power consumption and larger PCB area usage. With the rapid advances in silicon CMOS integrated circuit technology combined with extensive research, a global solutionswhich aims at introducing a global communication system that encompasses all communication standards appears to be emerging. State of the art CMOS technology not only has the capability of operation in the GHz range, but it also provides the advantage of low cost and high level of integration. These features propel CMOS technology as the ideal candidate for current trends, which currently aim to integrate more RF/MW circuits on the same chip. Armed with such technology ideas such as software radio look more attainable than they ever were in the past. Unfortunately, realizing true software radio for mobile applications still remains a tremendous challenge since it requires a high sampling rate and a wide-bandwidth Analog-to-Digital converter which is extremely power hungry and not suitable for battery operated mobile devices. Another approach to realize a flexible and reconfigurable RF/MW transceiver that could operate in a diverse mobile environment and provides a multiband and multistandard solution. The work presented in this thesis focuses on the design of an integrated and tunable low-noise amplifier as part of software defined radio (SDR).
|
34 |
Design and Evaluation of an Ultra-Low PowerLow Noise Amplifier LNAyasami, saeed January 2009 (has links)
<p>This master thesis deals with the study of ultra low power Low Noise Amplifier (LNA) for use inmedical implant device. Usually, low power consumption is required for a long battery lifetime andlonger operation. The target technology is 90nm CMOS process.First basic principle of LNA is discussed. Then based on a literature review of LNA design, theproposed LNA is presented in sub-threshold region which reduce power consumption through scalingthe supply voltage and through scaling current.The circuit implementation and simulations is presented to testify the performance of LNA .Besides thepower consumption simulated under the typical supply voltage (1V), it is also measured under someother low supply voltages (down to 0.5V) to investigate the minimum power consumption and theminimum noise figure. Evaluation results show that at a supply voltage of 1V the LNA performs a totalpower consumption of 20mW and a noise of 1dB. Proper performance is achieved with a current ofdown to 200uA and supply voltage of down to 0.45V, and a total power consumption of 200uW</p>
|
35 |
CMOS LNA Design for Multi-Standard ApplicationsMuhammad, Wasim January 2006 (has links)
<p>This thesis discusses design of narrowband low noise amplifiers for multi¬standard applications. The target of this work is to design a low noise ampli¬fier(LNA) for DCS1800 and Bluetooth standard frequency bands. Various designs for narrowband multi-standard LNAs have been studied and a new design for tunable multi-standard LNA has been presented and designed using accumulation mode MOS varactors.</p><p>As this design includes on-chip spiral inductors, the design, modelling and layout of on-chip inductors have been discussed briefly. The tool used for this purpose is ASITIC.</p><p>Also ESD protection techniques for RF circuits and their effect on LNA per¬formance has been discussed.</p><p>Finally fully differential LNA has been designed in O.35um AMS thick metal CMOS process using Cadence SpectreRF. The design also includes ESD pro¬tection at the input of LNA.</p>
|
36 |
Design methodologies for built-in testing of integrated RF transceivers with the on-chip loopback techniqueOnabajo, Marvin Olufemi 15 May 2009 (has links)
Advances toward increased integration and complexity of radio frequency (RF) andmixed-signal integrated circuits reduce the effectiveness of contemporary testmethodologies and result in a rising cost of testing. The focus in this research is on thecircuit-level implementation of alternative test strategies for integrated wirelesstransceivers with the aim to lower test cost by eliminating the need for expensive RFequipment during production testing.The first circuit proposed in this thesis closes the signal path between the transmitterand receiver sections of integrated transceivers in test mode for bit error rate analysis atlow frequencies. Furthermore, the output power of this on-chip loopback block wasmade variable with the goal to allow gain and 1-dB compression point determination forthe RF front-end circuits with on-chip power detectors. The loopback block is intendedfor transceivers operating in the 1.9-2.4GHz range and it can compensate for transmitterreceiveroffset frequency differences from 40MHz to 200MHz. The measuredattenuation range of the 0.052mm2 loopback circuit in 0.13µm CMOS technology was 26-41dB with continuous control, but post-layout simulation results indicate that theattenuation range can be reduced to 11-27dB via optimizations.Another circuit presented in this thesis is a current generator for built-in testing ofimpedance-matched RF front-end circuits with current injection. Since this circuit hashigh output impedance (>1k up to 2.4GHz), it does not influence the input matchingnetwork of the low-noise amplifier (LNA) under test. A major advantage of the currentinjection method over the typical voltage-mode approach is that the built-in test canexpose fabrication defects in components of the matching network in addition to on-chipdevices. The current generator was employed together with two power detectors in arealization of a built-in test for a LNA with 14% layout area overhead in 0.13µm CMOStechnology (<1.5% for the 0.002mm2 current generator). The post-layout simulationresults showed that the LNA gain (S21) estimation with the external matching networkwas within 3.5% of the actual gain in the presence of process-voltage-temperaturevariations and power detector imprecision.
|
37 |
Design of a Direct-conversion Radio Receiver Front-end in CMOS TechnologyErixon, Mats January 2002 (has links)
In this Master's thesis, a direct-conversion receiver front-end has been designed in a 0.18um CMOS technology. Direct-conversion receivers (DCR) have obvious advantages over the heterodyne counterpart. Since the intermediate frequency (IF) is zero, the problem of image is circumvented. As a result, no front-end image reject filter is required and the channel selection requires only a low-pass filter, which makes it easy to integrate directly on chip. However, the DCR also suffers from several drawbacks such as extreme sensitivity to DC offsets, 1/f noise, local oscillator (LO) leakage/radiation, front-end nonlinearity and I/Q mismatch. This implies very high demands on the DCR front-end. The front-end comprises a low-noise amplifier (LNA) and a mixer. Different LNA and mixer architectures has been studied and from the mentioned inherited problems with direct conversion, one proposal for a solution is a differential source degenerated LNA and a differential harmonic mixer, which has been designed and simulated. The LNA has a gain of 12dB, a noise figure of 3.6dB and provides a return loss better than -15dB. The overall noise figure of the signal path is 8dB and the overall IIP3 and IIP2 is -12dBm and 31dBm, respectively.
|
38 |
Design and Evaluation of an Ultra-Low PowerLow Noise Amplifier LNAyasami, saeed January 2009 (has links)
This master thesis deals with the study of ultra low power Low Noise Amplifier (LNA) for use inmedical implant device. Usually, low power consumption is required for a long battery lifetime andlonger operation. The target technology is 90nm CMOS process.First basic principle of LNA is discussed. Then based on a literature review of LNA design, theproposed LNA is presented in sub-threshold region which reduce power consumption through scalingthe supply voltage and through scaling current.The circuit implementation and simulations is presented to testify the performance of LNA .Besides thepower consumption simulated under the typical supply voltage (1V), it is also measured under someother low supply voltages (down to 0.5V) to investigate the minimum power consumption and theminimum noise figure. Evaluation results show that at a supply voltage of 1V the LNA performs a totalpower consumption of 20mW and a noise of 1dB. Proper performance is achieved with a current ofdown to 200uA and supply voltage of down to 0.45V, and a total power consumption of 200uW
|
39 |
CMOS LNA Design for Multi-Standard ApplicationsMuhammad, Wasim January 2006 (has links)
This thesis discusses design of narrowband low noise amplifiers for multi¬standard applications. The target of this work is to design a low noise ampli¬fier(LNA) for DCS1800 and Bluetooth standard frequency bands. Various designs for narrowband multi-standard LNAs have been studied and a new design for tunable multi-standard LNA has been presented and designed using accumulation mode MOS varactors. As this design includes on-chip spiral inductors, the design, modelling and layout of on-chip inductors have been discussed briefly. The tool used for this purpose is ASITIC. Also ESD protection techniques for RF circuits and their effect on LNA per¬formance has been discussed. Finally fully differential LNA has been designed in O.35um AMS thick metal CMOS process using Cadence SpectreRF. The design also includes ESD pro¬tection at the input of LNA.
|
40 |
Design of Baluns and Low Noise Amplifiers in Integrated Mixed-Signal Organic SubstratesGovind, Vinu 19 July 2005 (has links)
The integration of mixed-signal systems has long been a problem in the semiconductor industry. CMOS System-on-Chip (SOC), the traditional means for integration, fails mixed-signal systems on two fronts; the lack of on-chip passives with high quality (Q) factors inhibits the design of completely integrated wireless circuits, and the noise coupling from digital to analog circuitry through the conductive silicon substrate degrades the performance of the analog circuits. Advancements in semiconductor packaging have resulted in a second option for integration, the System-On-Package (SOP) approach. Unlike SOC where the package exists just for the thermal and mechanical protection of the ICs, SOP provides for an increase in the functionality of the IC package by supporting multiple chips and embedded passives. However, integration at the package level also comes with its set of hurdles, with significant research required in areas like design of circuits using embedded passives and isolation of noise between analog and digital sub-systems.
A novel multiband balun topology has been developed, providing concurrent operation at multiple frequency bands. The design of compact wideband baluns has been proposed as an extension of this theory. As proof-of-concept devices, both singleband and wideband baluns have been fabricated on Liquid Crystalline Polymer (LCP) based organic substrates. A novel passive-Q based optimization methodology has been developed for chip-package co-design of CMOS Low Noise Amplifiers (LNA). To implement these LNAs in a mixed-signal environment, a novel Electromagnetic Band Gap (EBG) based isolation scheme has also been employed.
The key contributions of this work are thus the development of novel RF circuit topologies utilizing embedded passives, and an advancement in the understanding and suppression of signal coupling mechanisms in mixed-signal SOP-based systems. The former will result in compact and highly integrated solutions for RF front-ends, while the latter is expected to have a significant impact in the integration of these communication devices with high performance computing.
|
Page generated in 0.5252 seconds