There are investigated accuracy issues of edges and ends evaluation problems of meander slow-wave systems in the dissertation. Objects of research – mathematical models of multiconductor and meander microstrip delay lines, numerical analysis methods. Aim of the work – after creating mathematical models, based on finite difference time domain method, explore ends and edges discontinuity effects on meander microstrip delay lines time and frequency characteristics, propose structural improvement measures of meander delay line. The dissertation approaches major tasks such as: mathematical individual, coupled, multiconductor microstrip lines models composition for performance and their properties investigation using finite difference and finite difference time domain methods of analysis; synthesis algorithm of multiconductor microstrip lines and analysis algorithm of meander microstrip delay line and methodology of their electrical characteristics calculation creation. The thesis consists of four parts including introduction, 4 chapters, conclusions, references. The introduction reveals investigated problem, importance of the thesis and object of research. It also describes the purpose and tasks of the dissertation, research methodology, scientific novelty and the practical significance of results examined in the thesis and defended statements. The introduction ends in presenting the author’s publications on the subject of the defended dissertation, offering the material of made... [to full text] / Disertacijoje sprendžiama lėtinimo sistemų kraštinių ir galinių laidininkų įtakos modelių tikslumui įvertinimo problema. Pagrindiniai tyrimo objektai – daugialaidžių ir meandrinių mikrojuostelinių linijų matematiniai modeliai, skaitiniai analizės metodai. Darbo tikslas – sukūrus modelius, grįstus baigtinių skirtumų laiko srities metodu, ištirti galinių ir kraštinių laidininkų netolygumų įtaką meandrinių mikrojuostelinių vėlinimo linijų laiko ir dažninėms charakteristikoms, pasiūlyti meandrinių vėlinimo linijų konstrukcijų tobulinimo priemones. Darbe sprendžiami uždaviniai: matematinių pavienės, susietųjų ir daugialaidžių mikrojuostelinių linijų modelių sudarymas ir savybių tyrimas, taikant baigtinių skirtumų bei baigtinių skirtumų laiko srities analizės metodus; daugialaidžių mikrojuostelinių linijų sintezės ir meandrinių mikrojuostelinių vėlinimo linijų analizės algoritmų bei jų elektrinių charakteristikų skaičiavimo metodikų sudarymas. Disertaciją sudaro įvadas, keturi skyriai, bendrosios išvados, naudotos literatūros ir autoriaus publikacijų disertacijos tema sąrašai. Įvadiniame skyriuje formuluojama tiriamoji problema, aptariamas darbo aktualumas, aprašomas tyrimų objektas, formuluojamas darbo tikslas bei uždaviniai, aprašoma tyrimų metodika, darbo mokslinis naujumas, rezultatų praktinė reikšmė, ginamieji teiginiai. Įvado pabaigoje pristatomi pranešimai konferencijose disertacijos tema bei pateikiama disertacijos struktūra. Pirmajame skyriuje pateikiama literatūros... [toliau žr. visą tekstą]

Made available in DSpace on 2015-03-03T15:07:32Z (GMT). No. of bitstreams: 1 AdaildoGDAJ_DISSERT.pdf: 911535 bytes, checksum: 85d35a0c8d60343a1313312b827ff4af (MD5) Previous issue date: 2007-02-22 / Conselho Nacional de Desenvolvimento Cient?fico e Tecnol?gico / The great interest observed in wireless communication systems has required the development of new configurations of microstrip antennas, because they are easily built and integrated to other microwave circuit components, which is suitable for the construction and development of planar antenna arrays and microwave integrated circuits. This work presents a new configuration of tapered microstrip antenna, which is obtained by impressing U-slots on the conducting patch combined with a transmission line matching circuit that uses an inset length. It is shown that the use of U-slots in the microstrip antenna conducting patch excites new resonating modes, that gives a multiband characteristic for the slotted microstrip antenna, that is suitable for applications in communication systems that operates several frequencies simultaneously. Up to this date, the works reported in the literature deals with the use of Uslotted microstrip rectangular antennas fed by a coaxial probe. The properties of a linear array of microstrip patch tapered antennas are also investigated. The main parameters of the U slotted tapered microstrip antennas are investigated for different sizes and locations of the slots impressed on the conducting patch. The analysis of the proposed antenna is performed by using the resonant cavity and equivalent transmission line methods, in combination with a parametric study, that is conducted by the use of the Ansoft Designer, a commercial computer aided microwave software well known by its accuracy and efficiency. The mentioned methods are used to evaluate the effect in the antennas parameters, like resonant frequency and return loss, produced by variations of the antenna structural parameters, accomplished separately or simultaneously. An experimental investigation is also developed, that consists of the design, construction and measurement of several U slotted microstrip antenna prototypes. Finally, theoretical and simulated results are presented that are in agreement with the measured ones. These results are related to the resonating modes identification and to the determination of the main characteristics of the investigated antennas, such as resonant frequency, return loss, and radiation pattern / A demanda por novos sistemas de comunica??es sem fio (wireless communication systems) tem requerido o desenvolvimento de novas configura??es de antenas de microfita, pois estas antenas apresentam uma grande facilidade de integra??o com outros componentes de circuito que facilitam a constru??o de arranjos planares e de circuitos integrados em freq??ncias de microondas. Neste trabalho ? analisada uma nova configura??o de antena de microfita afilada, na qual s?o introduzidas fendas em U (U-slots), no patch condutor, al?m de uma reentr?ncia (inset), atrav?s de uma se??o de linha de microfita, para fins de casamento da imped?ncia de entrada. A introdu??o de uma ou v?rias fendas no patch condutor da antena de microfita excita novos modos de resson?ncia, dando ? estrutura fendida uma caracter?stica de opera??o em multibanda, que possibilita a sua utiliza??o em sistemas com freq??ncias de opera??es distintas. Os trabalhos publicados com a impress?o de fendas em U dizem respeito ? utiliza??o de patches retangulares de microfita alimentados por cabo coaxial. Tamb?m ? investigada a associa??o de antenas afiladas na composi??o de arranjos lineares. S?o examinados e discutidos diversos aspectos relacionados com as dimens?es dessa fenda e o seu posicionamento no patch da antena considerada em termos do efeito produzido nas suas principais caracter?sticas de radia??o. A an?lise da antena proposta ? efetuada atrav?s dos m?todos da cavidade ressonante e da linha de transmiss?o modificados, em combina??o com um estudo param?trico, que ? realizado atrav?s do software comercial Ansoft Designer. Estes m?todos s?o empregados para avaliar as modifica??es produzidas nas caracter?sticas eletromagn?ticas, como a freq??ncia de resson?ncia e a perda de retorno, da antena em resposta ?s varia??es introduzidas em alguns dos seus par?metros estruturais. Al?m da investiga??o te?rica, ? inclu?da uma parte experimental que consistiu no projeto, constru??o e medi??o de v?rios prot?tipos configura??o de antena considerada. Finalmente, s?o apresentados resultados te?ricos (m?todos aproximados) e simulados (Ansoft Designer), que apresentam boa concord?ncia com os das medi??es efetuadas. Estes resultados consistem principalmente na identifica??o dos modos de resson?ncia e na determina??o das caracter?sticas principais das antenas consideradas, como a freq??ncia de resson?ncia, a perda de retorno e o diagrama de radia??o

Made available in DSpace on 2014-12-17T14:55:07Z (GMT). No. of bitstreams: 1 ClarissaLN.pdf: 3152047 bytes, checksum: a2e14bfa9e4c314444ebb4284dc7608b (MD5) Previous issue date: 2008-10-21 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / This work presents a theoretical and experimental investigation about the properties of microstrip antennas for ultra-wideband systems. Configurations of elliptic monopoles with different eccentricities and circular monopoles are considered. Two prototypes for each antenna configuration were built, one with the typical microstrip configuration and the other is similar to the first, except for a small aperture in the ground plane. Therefore, this work proposes to modify the configuration of the ground plane of the monopoles designed adding a rectangular stub, in order to optimize and improve the performance of such structures. The obtained results show that the introduction of that rectangular aperture in the ground plane allows an improvement of the frequency response for the considered antenna propotypes. It is observed a good agreement between the measured and simulated results. Finally, some proposals for future works are presented / Este trabalho apresenta uma investiga??o te?rica e experimental sobre as propriedades de antenas de microfita para sistemas de banda ultra larga. S?o consideradas configura??es de monopolos el?pticos com excentricidades diferentes, e monopolos circulares. Foram constru?dos dois prot?tipos para cada configura??o de antena, um com a configura??o t?pica de microfita e outro similar ao primeiro, mas com uma pequena abertura no plano de terra. Assim, este trabalho objetiva modificar a configura??o do plano de terra dos monopolos projetados atrav?s da inser??o de um recorte retangular, para fins de otimiza??o e melhoria nos desempenhos das estruturas. Os resultados obtidos mostram que a introdu??o dessa abertura retangular no plano de terra permite melhorar a resposta em freq??ncia das antenas consideradas. Observa-se uma boa concord?ncia entre os resultados medidos e simulados. Algumas propostas para a realiza??o de trabalhos futuros s?o apresentadas

International Telemetering Conference Proceedings / October 17-20, 1994 / Town & Country Hotel and Conference Center, San Diego, California / Planar microstrip antennas are desirable in many telemetry applications because they are small in size, light in weight, and conformal to most surfaces. The design and optimization of circularly-polarized omnidirectional microstrip arrays using a new software simulation tool are discussed in this paper. Critical design issues such as the optimization of each array element for circular polarization and the minimization of mutual couplings as well as feed network mismatch are examined. The software tool, which consists of a novel graphical user interface and a full-wave numerical simulator for a flat mounting surface, provides a testbed environment for the user to explore new designs as well as optimizing existing designs. Using this tool, the design of several wraparound arrays with different mounting cylinder radii are presented. Comparisons between measured and simulated data for two S-band 8-element wraparound arrays are also presented.

International Telemetering Conference Proceedings / October 27-30, 1997 / Riviera Hotel and Convention Center, Las Vegas, Nevada / This student paper was produced as part of the team design competition in the University of Arizona course ECE 485, Radiowaves, and Telemetry. It describes the design of a telemetry support package for interplanetary exploration. Control and processing of telemetric signals between an earth based control station, an exploratory orbiter and probe pods are the focus of this design. Using this design data retrieval is achieved at a highly reliable rate of 1 error in 10^-10 bits. The exploratory orbiter, carrying a payload of probes, is launched and proceeds along its predetermined trajectory. Commands from the earth-based control station is used to send the orbiter to planetary destinations. The craft then establishes a stable non-geosynchronous orbit. Several probe pods are launched towards the planet at predetermined locations. These probe pods collect and send data, as well as system monitoring information to the orbiting craft. The orbiting craft then retrieves the signals generated by all pods and relays that information to an earth-based control station.

The objective of this PhD research was to design and implement novel microfluidic radio-frequency (RF) structures on multilayer organic substrates for cooling and tuning purposes. The different designs were implemented to target applications up to C-band (4 GHz – 8 GHz) frequencies. The system-on-package (SoP) solution adopted throughout this work is well adapted for such designs where there is a need to integrate the functionality of different sub-components into a single hybrid fully packaged system. The first part of the thesis is dedicated to the study of a specific liquid cooling scheme using integrated microchannels on organics placed beneath different types of heat sources. A 1 W gallium nitride (GaN) die was cooled using this method and an analysis is presented regarding the cases where the coolant is static or dynamic inside the microchannel. The second part of the thesis deals with microfluidically reconfigurable microstrip RF circuits, mainly bandpass filters and power amplifiers (PAs). The microfluidic tuning technique is based on the change in the effective dielectric constant that the RF signal “sees” when traveling above two microchannels with different fluids. This technique was used to shift the frequency response of an L-band microstrip bandpass filter by replacing DI water with acetone inside a 60 mil micro-machined cavity. This technique was also used to design reconfigurable matching networks which constitute the main part of the proposed tunable GaN-based PA for S- and C-band applications. The final part of the thesis expands the previous results by combining both cooling and tuning in a single RF design. To prove the concept, cooling and tuning microchannels were integrated into a single package to cool a GaN-based PA and tune its frequency response at the same time from 2.4 GHz to 5.8 GHz and vice versa.

Thesis (MScEng (Electrical and Electronic Engineering))--University of Stellenbosch, 2006. / This thesis focuses on the coaxial-microstrip T-resonator measurement technique to determine the aperture plane capacitance and radiation resistance of electrically short monopoles above a finite ground plane at Radio Frequencies. The determination of these impedance parameters is of interest as they are needed in the Thévenin equivalent circuit of the monopole to establish the relationship between the monopole, the electromagnetic field within which it is immersed, and its surrounding medium properties. Electromagnetically short monopoles are used in various applications such as in permittivity and biomedical measurement techniques and near-field metrology. The coaxial-microstrip device allows the measurement of transmission coefficient nulls when connected to the network analyser. By measuring the frequency shift in transmission null points and analysing the results, the capacitance of short monopoles of various lengths can be obtained. The radiation resistance of the monopole can also be determined by comparing the depth of transmission coefficient nulls points at various resonant frequencies. Monopoles ranging from flush-mounted to various sizes of protruding centre conductors, both bare and insulated, are investigated in the frequencies ranging from 45 MHz to 3 GHz. The experimental results compare well with FEKO numerical predictions at the ranges where this technique is applicable. The technique is however not applicable near and beyond the resonant frequency of the monopole where it is considered to be electrically long. Measurements to obtain monopole impedance parameters were conducted by connecting the device to the HP 8510C Network Analyser. To enhance accuracy, the Network Analyser was calibrated using a high quality calibration kit with precisely defined standards. The technique used was found to accurately yield capacitances in the range of 0.0211 to 1 pF and radiation resistances in the range of 0.9245 to 12.1 Ohms. These results were obtained for monopoles of length 0.0062 < h/l < 0.24. Results from literature, viz. W.R Scott, R.W.P. King and L.J. Cooper, show radiation resistance in the ranges: 2.5 to 35 Ohms (0.079 < h/l < 0.22), 1.26 to 74.08 Ohms (0.026 < h/l < 0.28) and 5.59 to 74.98 Ohms (0.1 < 0.28) for electrically short monopoles. The results of this work are compared with those in the literature and show variations of less than 6%. A technique capable of accurately measuring capacitance and radiation resistance of the monopole at various lengths of protruding centre conductor has been developed. The capacitance for a flush probe compares very well (agreement is less than 6%) when compared with those obtained by the previous researchers. The technique is capable of yielding accurate results radio frequencies in the challenging low radiation resistance range around 1 Ohm.

Orientador: Naasson Pereira de Alcântara Junior / Banca: José Carlos Sartoti / Banca: José Alfredo Covolan Ulson / Resumo: Neste trabalho, apresenta-se o desenvolvimento de uma metodologia utilizando redes neurais artificiais, para auxiliar na determinação da freqüência de ressonância no projeto de antenas tipo microfita de equipamentos móveis, tanto para antenas retangulares como para antenas triangulares. Compararam-se modelos deterministas e modelos empíricos baseados em Redes Neurais Artificiais (RNA) da literatura pesquisada com os modelos apresentados neste trabalho. Apresentam-se modelos empíricos baseados em RNAs tipo Perceptron Multicamadas (PMC). Os modelos propostos também são capazes de serem integrados em um ambiente CAD (Computed Aided Design) para projetar antenas tipo microfita de equipamentos móveis. / Abstract: This work presents the development of models that can be used in the design of microstrip antennas for mobile communications. The antennas can be triangular or rectangular. The presented models are compared with deterministic and empirical models based on artificial neural networks (ANN) presented in the literature. The models are based on Perceptron Multilayer (PML). The models can be embedded in CAD systems, in order to design microstrip antennas for mobile communications. / Mestre

Modeling of patch antennas and resonators on arbitrary dielectric substrates using surface RWG and volume edge based basis functions and the Method of Moments is implemented. The performance of the solver is studied for different mesh configurations. The results obtained are tested by comparison with experiments and Ansoft HFSS v9 simulator. The latter uses a large number of finite elements (up to 200K) and adaptive mesh refinement, thus providing the reliable data for comparison. The error in the resonant frequency is estimated for canonical resonator structures at different values of the relative dielectric constant ƒÕr, which ranges from 1 to 200. The reported results show a near perfect agreement in the estimation of resonant frequency for all the metal-dielectric resonators. Behavior of the antenna input impedance is tested, close to the first resonant frequency for the patch antenna. The error in the resonant frequency is estimated for different structures at different values of the relative dielectric constant ƒÕr, which ranges from 1 to 10. A larger error is observed in the calculation of the resonant frequency of the patch antenna. Moreover, this error increases with increase in the dielectric constant of the substrate. Further scope for improvement lies in the investigation of this effect.

Tese de Doutoramento. Engenharia Electrónica e de Computadores - Telecomunicações. Faculdade de Engenharia. Universidade do Porto. 2011