Les antennes multifaisceaux (AMFs) sont cruciales pour les applications de télécommunications par satellite modernes et futures, civiles et militaires. La partie basse du spectre électromagnétique est saturée alors que de larges bandes de fréquences sont disponibles dans la bande Ka, dans laquelle des missions à très-haut débit ont émergées au cours de la dernière décennie. La tendance consiste à réduire la taille des spots pour les couvertures multi-spots afin de diminuer le prix des satellites. Ainsi des antennes d’ouverture de plus en plus grande électriquement sont requises, induisant des ruptures technologiques majeures. Les lentilles de Luneburg insérées dans un guide d’ondes à plans parallèles (GOPP) deux plaques métalliques parallèles (PMPs) sont des solutions attractives pour illuminer les AMFs, puisqu’elles peuvent aboutir à des formateurs de faisceaux de bande et champ de visée larges, pertes et coûts faibles, et simples à concevoir, réaliser et intégrer. Les travaux de cette thèse portent sur le développement de nouvelles méthodes d’implémentation et sur la conception de AMFs à base de lentille de Luneburg. La réalisation de la lentille de Luneburg est connue pour être un défi technologique majeur. Un état de l’art des méthodes de réalisation est fourni. Ensuite, deux nouvelles méthodes sont proposées, ainsi qu’une méthode et des outils de conception. La première méthode de réalisation consiste en une matrice périodique et régulière de plots métalliques de taille inférieure à la longueur d’onde, et où la séparation du GOPP varie. La hauteur des plots et la séparation du GOPP contrôlent la valeur de l’indice de réfraction équivalente. L’antenne à 9 faisceaux tout métal conçue, fabriquée et mesurée, comporte 8314 plots et présente d’excellentes performances, notamment meilleures que sa version à séparation de plaques constante. La seconde méthode de réalisation consiste en une matrice périodique et régulière de trous circulaires de taille inférieure à la longueur d’onde réalisés sur un des deux revêtements cuivrés d’un substrat diélectrique plus une plaque métallique supérieure séparée du plan des trous par une couche d’air d’épaisseur fixe. L’antenne à 5 faisceaux conçue comporte 2696 trous et présente de très bonnes performances comparés à ces semblables dans la littérature. / Multi-beam antennas (MBAs) are crucial to modern and future, civilian and military satellite telecommunications applications. The low part of the electromagnetic spectrum is congested, while wide band of frequencies are available in the Ka-band, in which broadband missions have emerged in the last decade. The trend is reducing the size of spots in multi-beam coverage to reduce the cost of satellites, hence more electrically large antennas are needed, with major technological breakthrough as a consequence. Luneburg lenses in parallel-plate waveguide (PPW) are attractive solutions to excite MBAs, since they could lead to wide band and field-of-view, low loss and cost, easy to design, manufacture and accommodate Beam Forming Networks. This PhD deals with the development of novel implementations and the design of broadband, low loss and wide field-of-view Luneburg lens based MBAs. The implementation of the Luneburg lens is known as a major technological challenge. A state-of-the art of the implementation techniques is presented. Then two novel implementations of Luneburg lens in PPW environment are proposed, like design method, process and tools. The first implementation consists of a periodic and regular array of subwavelength vertical metal posts, where the PPW spacing is variable. The post height and PPW spacing modulate the equivalent refractive index. The all-metal 9-beams antenna designed, manufactured and measured, has 8314 posts and shows excellent performances, better than the traditional constant PPW spacing version. The second implementation consists of periodic and regular array of subwavelength circular holes etched on the copper cladding of a dielectric substrate with an air gap between the holes plane and the PPW top plate. The radius of the holes control the equivalent index. The 5-beams antenna designed has 2696 holes and shows very good performances as compared to similar devices in literature.

This thesis presents a new template for multidisciplinary habitat mapping that combines the analyses of seafloor geomorphology, oceanographic proxies and modelling of associated biologic features. High resolution swath bathymetry of the Faial and western Pico shelves is used to present the first state-of-the-art geomorphologic assessment of submerged island shelves in the Azores. Solid seafloor structures are described in previously unreported detail together with associated volcanic, tectonic and erosion processes. The large sedimentary expanses identified in the area are also investigated and the large bedforms identified are discussed in view of new data on the local hydrodynamic conditions. Coarse-sediment zones of types hitherto unreported for volcanic island shelves are described using swath data and in situ imagery together with sub-bottom profiles and grainsize information. The hydrodynamic and geological processes producing these features are discussed. New oceanographic information extracted from satellite imagery is presented including yearly and seasonal sea surface temperature and chlorophyll-a concentration fields. These are used as proxies to understand the spatio-temporal variability of water temperature and primary productivity in the immediate island vicinity. The patterns observed are discussed, including onshore-offshore gradients and the prevalence of colder/more productive waters in the Faial-Pico passage and shelf areas in general. Furthermore, oceanographic proxies for swell exposure and tidal currents are derived from GIS analyses and shallow-water hydrographic modelling. Finally, environmental variables that potentially regulate the distribution of benthic organisms (seafloor nature, depth, slope, sea surface temperature, chlorophyll-a concentration, swell exposure and maximum tidal currents) are brought together and used to develop innovative statistical models of the distribution of six macroalgae taxa dominant in the infralittoral (articulated Corallinaceae, Codium elisabethae, Dictyota spp., Halopteris filicina, Padina pavonica and Zonaria tournefortii). Predictive distributions of these macroalgae are spatialized around Faial island using ordered logistic regression equations and raster fields of the explanatory variables found to be statistically significant. This new approach represents a potentially highly significant step forward in modelling benthic communities not only in the Azores but also in other oceanic island shelves where the management of benthic species and biotopes is critical to preserve ecosystem health.

Detailed information about the oceanic environment is essential for many applications in the field of marine geology, marine biology, coastal engineering, and marine operations. Especially, knowledge of the properties of the sediment body is often required. Acoustic remote sensing techniques have become highly attractive for classifying the sea bottom and for mapping the sediment properties, due to their high coverage capabilities and low costs compared to common sampling methods. In the last decades, a number of different acoustic devices and related techniques for analyzing their signals have evolved. Each sensor has its specific application due to limitations in the frequency range and resolution. In practice, often a single acoustic tool is chosen based on the current application, supported by other non-acoustic data where required. However, different acoustic remote sensing techniques can supplement each other, as shown in this thesis. Even more, a combination of complementary approaches can contribute to the proper understanding of sound propagation, which is essential when using sound for environmental classification purposes. This includes the knowledge of the relation between acoustics and sediment properties, the focus of this thesis. Providing a detailed three dimensional picture of the sea bottom sediments that allows for gaining maximum insight into this relation is aimed at.<p><p><p>Chapters 4 and 5 are adapted from published work, with permission:<p>DOI:10.1121/1.3569718 (link: http://asadl.org/jasa/resource/1/jasman/v129/i5/p2878_s1) and<p>DOI:10.1109/JOE.2010.2066711 (link: http://ieeexplore.ieee.org/xpl/articleDetails.jsp?tp=&arnumber=5618582&queryText%3Dsiemes)<p>In reference to IEEE copyrighted material which is used with permission in this thesis, the IEEE does not endorse any of the Université libre de Bruxelles' products or services.<p> / Doctorat en Sciences de l'ingénieur / info:eu-repo/semantics/nonPublished

Intra-archipelago waterways, including tidal strait networks, present a complex set of barriers to, and conduits for sediment transport between marine basins. Tidal straits may also be the least well understood tide-dominated sedimentary environment. To address these issues, currents, sediment transport pathways, and seabed sedimentology & geomorphology were studied in the central Salish Sea (Gulf and San Juan Islands region) of British Columbia, Canada and Washington State, USA. A variety of data types were integrated: 3D & 2D tidal models, multibeam bathymetry & backscatter, seabed video, grab samples, cores and seismic reflection. This dissertation included the first regional sediment transport modelling study of the central Salish Sea. Lagrangian particle dispersal simulations were driven by 2D tidal hydrodynamics (~59-days). It was found that flood-tide dominance through narrow intra-archipelago connecting straits resulted in the transfer of sediment into the inland Strait of Georgia, an apparent sediment sink. The formative/maintenance processes at a variety of seabed landforms, including a banner bank with giant dunes, were explained with modelled tides and sediment transport. Deglacial history and modern lateral sedimentological and morphological transitions were also considered. Based on this modern environment, adjustments to the tidal strait facies model were identified. In addition, erosion and deposition patterns across the banner bank (dune complex) were monitored with 8-repeat multibeam sonar surveys (~10 years). With these data, spatially variable bathymetric change detection techniques were explored: A) a cell-by-cell probabilistic depth uncertainty-based threshold (t-test); and B) coherent clusters of change pixels identified with the local Moran's Ii spatial autocorrelation statistic. Uncertainty about volumetric change is a considerable challenge in seabed change research, compared to terrestrial studies. Consideration of volumetric change confidence intervals tempers interpretations and communicates metadata. Techniques A & B may both be used to restrict volumetric change calculations in area, to exclude low relative bathymetric change signal areas. / Graduate / 2018-12-07

[EN] The processing of radiofrequency signals using photonics means is a discipline that appeared almost at the same time as the laser and the optical fibre. Photonics offers the capability of managing broadband radiofrequency (RF) signals thanks to its low transmission attenuation, a variety of linear and non-linear phenomena and, recently, the potential to implement integrated photonic subsystems. These features open the door for the implementation of multiple functionalities including optical transportation, up and down frequency conversion, optical RF filtering, signal multiplexing, de-multiplexing, routing and switching, optical sampling, tone generation, delay control, beamforming and photonic generation of digital modulations, and even a combination of several of these functionalities. This thesis is focused on the application of vector processing in the optical domain to radiofrequency signals in two fields of application: optical beamforming, and photonic vector modulation and demodulation of digital quadrature amplitude modulations. The photonic vector control enables to adjust the amplitude and phase of the radiofrequency signals in the optical domain, which is the fundamental processing that is required in different applications such as beamforming networks for direct radiating array (DRA) antennas and multilevel quadrature modulation. The work described in this thesis include different techniques for implementing a photonic version of beamforming networks for direct radiating arrays (DRA) known as optical beamforming networks (OBFN), with the objectives of providing a precise control in terrestrial applications of broadband signals at very high frequencies above 40 GHz in communication antennas, optimizing the size and mass when compared with the electrical counterparts in space application, and presenting new photonic-based OBFN functionalities. Thus, two families of OBFNs are studied: fibre-based true time delay architectures and integrated networks. The first allow the control of broadband signals using dispersive optical fibres with wavelength division multiplexing techniques and advanced functionalities such as direction of arrival estimation in receiving architectures. In the second, passive OBFNs based on monolithically-integrated Optical Butler Matrices are studied, including an ultra-compact solution using optical heterodyne techniques in silicon-on-insulator (SOI) material, and an alternative implementing a homodyne counterpart in germanium doped silica material. In this thesis, the application of photonic vector processing to the generation of quadrature digital modulations has also been investigated. Multilevel modulations are based on encoding digital information in discrete states of phase and amplitude of an electrical signal to enhance spectral efficiency, as for instance, in quadrature modulation. The signal process required for generating and demodulating this kind of signals involves vector processing (phase and amplitude control) and frequency conversion. Unlike the common electronic or digital implementation, in this thesis, different photonic based signal processing techniques are studied to produce digital modulation (photonic vector modulation, PVM) and demodulation (PVdM). These techniques are of particular interest in the case of broadband signals where the data rate required to be managed is in the order of gigabit per second, for applications like wireless backhauling of metro optical networks (known as fibre-to-the-air). The techniques described use optical dispersion in optical fibres, wavelength division multiplexing and photonic up/down conversion. Additionally, an optical heterodyne solution implemented monolithically in a photonic integrated circuit (PIC) is also described. / [ES] El procesamiento de señales de radiofrecuencia (RF) utilizando medios fotónicos es una disciplina que apareció casi al mismo tiempo que el láser y la fibra óptica. La fotónica ofrece la capacidad de manipular señales de radiofrecuencia de banda ancha, una baja atenuación, procesados basados en una amplia variedad de fenómenos lineales y no lineales y, recientemente, el potencial para implementar subsistemas fotónicos integrados. Estas características ofrecen un gran potencial para la implementación de múltiples funcionalidades incluyendo transporte óptico, conversión de frecuencia, filtrado óptico de RF, multiplexación y demultiplexación de señales, encaminamiento y conmutación, muestreo óptico, generación de tonos, líneas de retardo, conformación de haz en agrupaciones de antenas o generación fotónica de modulaciones digitales, e incluso una combinación de varias de estas funcionalidades. Esta tesis se centra en la aplicación del procesamiento vectorial en el dominio óptico de señales de radiofrecuencia en dos campos de aplicación: la conformación óptica de haces y la modulación y demodulación vectorial fotónica de señales digitales en cuadratura. El control fotónico vectorial permite manipular la amplitud y fase de las señales de radiofrecuencia en el dominio óptico, que es el procesamiento fundamental que se requiere en diferentes aplicaciones tales como las redes de conformación de haces para agrupaciones de antenas y en la modulación en cuadratura. El trabajo descrito en esta tesis incluye diferentes técnicas para implementar una versión fotónica de las redes de conformación de haces de en agrupaciones de antenas, conocidas como redes ópticas de conformación de haces (OBFN). Se estudian dos familias de redes: arquitecturas de retardo en fibra óptica y arquitecturas integradas. Las primeras permiten el control de señales de banda ancha utilizando fibras ópticas dispersivas con técnicas de multiplexado por división de longitud de onda y funcionalidades avanzadas tales como la estimación del ángulo de llegada de la señal en la antena receptora. En la segunda, se estudian redes de conformación pasivas basadas en Matrices de Butler ópticas integradas, incluyendo una solución ultra-compacta utilizando técnicas ópticas heterodinas en silicio sobre aislante (SOI), y una alternativa homodina en sílice dopado con germanio. En esta tesis, también se han investigado técnicas de procesado vectorial fotónico para la generación de modulaciones digitales en cuadratura. Las modulaciones multinivel codifican la información digital en estados discretos de fase y amplitud de una señal eléctrica para aumentar su eficiencia espectral, como por ejemplo la modulación en cuadratura. El procesado necesario para generar y demodular este tipo de señales implica el procesamiento vectorial (control de amplitud y fase) y la conversión de frecuencia. A diferencia de la implementación electrónica o digital convencional, en esta tesis se estudian diferentes técnicas de procesado fotónico tanto para la generación de modulaciones digitales (modulación vectorial fotónica, PVM) como para su demodulación (PVdM). Esto es de particular interés en el caso de señales de banda ancha, donde la velocidad de datos requerida es del orden de gigabits por segundo, para aplicaciones como backhaul inalámbrico de redes ópticas metropolitanas (conocida como fibra hasta el aire). Las técnicas descritas se basan en explotar la dispersión cromática de la fibra óptica, la multiplexación por división de longitud de onda y la conversión en frecuencia. Además, se presenta una solución heterodina implementada monolíticamente en un circuito integrado fotónico (PIC). / [CAT] El processament de senyals de radiofreqüència (RF) utilitzant mitjans fotònics és una disciplina que va aparèixer gairebé al mateix temps que el làser i la fibra òptica. La fotònica ofereix la capacitat de manipular senyals de radiofreqüència de banda ampla, una baixa atenuació, processats basats en una àmplia varietat de fenòmens lineals i no lineals i, recentment, el potencial per implementar subsistemes fotònics integrats. Aquestes característiques ofereixen un gran potencial per a la implementació de múltiples funcionalitats incloent transport òptic, conversió de freqüència, filtrat òptic de RF, multiplexació i demultiplexació de senyals, encaminament i commutació, mostreig òptic, generació de tons, línies de retard, conformació de feix en agrupacions d'antenes i la generació fotònica de modulacions digitals, i fins i tot una combinació de diverses d'aquestes funcionalitats. Aquesta tesi es centra en l'aplicació del processament vectorial en el domini òptic de senyals de radiofreqüència en dos camps d'aplicació: la conformació òptica de feixos i la modulació i demodulació vectorial fotònica de senyals digitals en quadratura. El control fotònic vectorial permet manipular l'amplitud i la fase dels senyals de radiofreqüència en el domini òptic, que és el processament fonamental que es requereix en diferents aplicacions com ara les xarxes de conformació de feixos per agrupacions d'antenes i en modulació multinivell. El treball descrit en aquesta tesi inclou diferents tècniques per implementar una versió fotònica de les xarxes de conformació de feixos en agrupacions d'antenes, conegudes com a xarxes òptiques de conformació de feixos (OBFN), amb els objectius de proporcionar un control precís en aplicacions terrestres de senyals de banda ampla a freqüències molt altes per sobre de 40 GHz en antenes de comunicacions, optimitzant la mida i el pes quan es compara amb els homòlegs elèctrics en aplicacions espacials, i la presentació de noves funcionalitats fotòniques per agrupacions d'antenes. Per tant, s'estudien dues famílies de OBFNs: arquitectures de retard en fibra òptica i arquitectures integrades. Les primeres permeten el control de senyals de banda ampla utilitzant fibres òptiques dispersives amb tècniques de multiplexació per divisió en longitud d'ona i funcionalitats avançades com ara l'estimació de l'angle d'arribada del senyal a l'antena receptora. A la segona, s'estudien xarxes de conformació passives basades en Matrius de Butler òptiques en fotònica integrada, incloent una solució ultra-compacta utilitzant tècniques òptiques heterodinas en silici sobre aïllant (SOI), i una alternativa homodina en sílice dopat amb germani. D'altra banda, també s'ha investigat en aquesta tesi tècniques de processament vectorial fotònic per a la generació de modulacions digitals en quadratura. Les modulacions multinivell codifiquen la informació digital en estats discrets de fase i amplitud d'un senyal elèctric per augmentar la seva eficiència espectral, com ara la modulació en quadratura. El processat necessari per generar i desmodular aquest tipus de senyals implica el processament vectorial (control d'amplitud i fase) i la conversió de freqüència. A diferència de la implementació electrònica o digital convencional, en aquesta tesi s'estudien diferents tècniques de processament fotònic tant per a la generació de modulacions digitals (modulació vectorial fotònica, PVM) com per la seva demodulació (PVdM). Això és de particular interès en el cas de senyals de banda ampla, on la velocitat de dades requerida és de l'ordre de gigabits per segon, per a aplicacions com backhaul sense fils de xarxes òptiques metropolitanes (coneguda com fibra fins l'aire). Les tècniques descrites es basen en explotar la dispersió cromàtica de la fibra òptica, la multiplexació per divisió en longitud d'ona i la conversió en freqüència. A més, es prese / Piqueras Ruipérez, MÁ. (2016). Photonic Vector Processing Techniques for Radiofrequency Signals [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/63264 / TESIS

Although the physical characteristics of surfing breaks are well described in the literature, there is little specific research on surfing and coastal management. Such research is required because coastal engineering has had significant impacts to surfing breaks, both positive and negative. Strategic planning and environmental impact assessment methods, a central tenet of integrated coastal zone management (ICZM), are recommended by this thesis to maximise surfing amenities. The research reported here identifies key oceanographic considerations required for ICZM around surfing breaks including: surfing wave parameters; surfing break components; relationship between surfer skill, surfing manoeuvre type and wave parameters; wind effects on waves; currents; geomorphic surfing break categorisation; beach-state and morphology; and offshore wave transformations. Key coastal activities that can have impacts to surfing breaks are identified. Environmental data types to consider during coastal studies around surfing breaks are presented and geographic information systems (GIS) are used to manage and interpret such information. To monitor surfing breaks, a shallow water multibeam echo sounding system was utilised and a RTK GPS water level correction and hydrographic GIS methodology developed. Including surfing in coastal management requires coastal engineering solutions that incorporate surfing. As an example, the efficacy of the artificial surfing reef (ASR) at Mount Maunganui, New Zealand, was evaluated. GIS, multibeam echo soundings, oceanographic measurements, photography, and wave modelling were all applied to monitor sea floor morphology around the reef. Results showed that the beach-state has more cellular circulation since the reef was installed, and a groin effect on the offshore bar was caused by the structure within the monitoring period, trapping sediment updrift and eroding sediment downdrift. No identifiable shoreline salient was observed. Landward of the reef, a scour hole ~3 times the surface area of the reef has formed. The current literature on ASRs has primarily focused on reef shape and its role in creating surfing waves. However, this study suggests that impacts to the offshore bar, beach-state, scour hole and surf zone hydrodynamics should all be included in future surfing reef designs. More real world reef studies, including ongoing monitoring of existing surfing reefs are required to validate theoretical concepts in the published literature.