La surface d'un matériau est le lieu privilégié des interactions entre le matériau et son environnement. La technique couche-par-couche, qui consiste en un dépôt alterné de polyanions et de polycations, ouvre de nouvelles perspectives dans le domaine des biomatériaux pour le contrôle de ces interactions. La cohésion des films multicouches de polyélectrolytes est principalement assurée par des interactions électrostatiques mais a été étendue à d'autres forces motrices telles que les interactions hôte-invité. Nos travaux s’articulent autour de deux axes principaux. D’une part, nous nous sommes intéressés aux films multicouches de polymères neutres basés sur des interactions hôte-invité et en particulier à l'influence de la force du complexe d’inclusion b-cyclodextrine/ferrocène sur la topographie de ces films. La force de l’interaction hôte-invité a d’abord été modulée en associant différents invités (l’adamantane, le ferrocène et le pyrène) avec la β-cyclodextrine. La force du complexe b-cyclodextrine/ferrocène a été ensuite modulée par la présence de différents sels de sodium à différentes forces ioniques au cours de la construction du film. Une force d'interaction intermédiaire du complexe semble être nécessaire pour former des films continus, tandis que, si elle est trop faible, la force d'interaction limite la construction du film.D’autre part, motivé par le fait que la prévention des infections microbiennes des dispositifs médicaux implantables constitue un problème médical et financier majeur, nous avons développé de nouveaux revêtements antimicrobiens grâce à la technique couche-par-couche. Des films multicouches à base de polysaccharides contenant la cateslytine, un peptide antimicrobien, permettent l’inhibition en 24h du développement de Candida albicans et Staphylococcus aureus, qui sont des agents pathogènes communs et virulents rencontrés dans les maladies nosocomiales. La libération des peptides antimicrobiens est déclenchée par la dégradation enzymatique du film en présence des agents pathogènes. Le revêtement est ainsi qualifié d’auto-défensif. La non-cytotoxicité du film vis-à-vis des cellules humaines permet une application cliniquement pertinente pour prévenir les infections sur les cathéters. Des dimères à base de cateslytine de différentes longueurs et un dendrimère ont été synthétisés afin d'améliorer l'activité biologique du peptide d'origine, i.e. ses propriétés antimicrobiennes et antiinflammatoires. Afin d’élaborer des films antimicrobiens mécaniquement robustes, le polyuréthane (polymère entrant dans la composition des cathéters) a été fonctionnalisé par une couche de polydopamine qui peut ensuite réagir avec des groupements thiol ou amine, permettant la fixation covalente des films de polysaccharides antimicrobiens réticulés étape par étape. / The surface of a material is the privileged location, where the interactions between the material and its environment take place. In the field of biomaterials, the challenge is to control these interactions. A very versatile coating technique is the layer-by-layer deposition, which consists in the alternated deposition of polyanions and polycations. The cohesion of polyelectrolyte multilayer films is primarily ensured by electrostatic interactions but was extended to other driving forces such as host-guest interactions. Our work was constituted of two main parts.In the first part, the buildup of neutral polymer multilayer films based on host-guest interactions was studied and in particular the influence of β-cyclodextrin/ferrocene interaction strength on the topography of these films. The host-guest interaction strength was first modulated by involving different guests (adamantane, ferrocene and pyrene) in the buildup. Then, β -cyclodextrin/ferrocene interaction strength was tuned by the presence of different types and concentrations of salts during the multilayer buildup. Intermediate interaction strength seems to be required to form continuous films, whereas, if too low, the interaction strength limits the film buildup.In the second part, motivated by the fact that the prevention of pathogen colonization of implantable medical devices constitutes a major medical and financial issue, polyelectrolyte multilayers were used as tools to develop new antimicrobial coatings. Polysaccharide multilayer films containing cateslytin, an antimicrobial peptide, fully inhibited in 24h the development of Candida albicans and Staphylococcus aureus, which are common and virulent pathogens agents encountered in care-associated diseases. The release of the antimicrobial peptides was triggered by the enzymatic degradation of the film due to the pathogens themselves introducing the concept of self-defensive coating. The non-cytotoxicity of the film, towards human cells, highlights a medically relevant application to prevent infections on catheters. Different cateslytin based dimers with various lengths and one dendrimer were synthesized in order to improve the bioactivity of the original peptide, i.e. antimicrobial and anti-inflammatory properties. In order to obtain mechanically robust antimicrobial films, polyurethane (polymer that composes catheters) was functionalized with a polydopamine layer that can further react with thiol or amine groups, allowing the covalent attachment of step-by-step cross-linked antimicrobial polysaccharide films.

L’objectif premier de ce travail de thèse concerne la réalisation et la caractérisation de différents films multicouches afin d’étudier l’impact du phénomène de confinement des couches de polymères sur les propriétés barrières du polymère confiné et du film multicouche. Des films multicouches constitué de polycarbonate (PC) et de poly(m-xylène adipamide) (MXD6), polymères actuellement utilisés par les industries de l’emballage, ont tout d’abord été étudiés. Puis, dans un second temps, des films multicouches composés de polyesters biodégradables, à savoir des films multicouches d’acide polylactique (PLA) avec comme polymère confiné soit du poly(butylène succinate-co-butylène adipate) (PBSA) ou du poly(butylène succinate) (PBS), ont été élaborés.Une fois la structure multicouche obtenue et avoir confirmé l’amélioration de l’effet barrière grâce au phénomène de confinement, le deuxième objectif a été d’incorporer des charges lamellaires de type montmorillonite (Cloisite® 30B) dans la couche de polymère confiné dans le but d’accroitre davantage l’effet barrière du film multicouche sélectionné.Pour comprendre l’amélioration des propriétés barrières aux gaz et à l’eau des films multicouches élaborés, une analyse de la microstructure par DSC et DRX ainsi qu’une analyse des propriétés mécaniques ont été menées conjointement avec une observation par microscopie. / The objective of the work was the elaboration and the characterization of different multilayer films in order to study the impact of the confinement effect of the polymer layers on the barrier properties. Multilayer films of polycarbonate (PC) and poly(m-xylene adipamide) (MXD6), which are usual polymers for packaging industries, have been studied. Then, multilayer films composed of biodegradable polyesters, such as polylactic acid (PLA) with poly(butylene succinate-co-butylene adipate) (PBSA) or poly(butylene succinate) (PBS) as the confined layers, have been prepared and characterized.For the multilayer structure presenting improved barrier performances due to the confinement effect, the second objective was to insert lamellar clays (Cloisite® 30B) into the confined polymer layers to again improve the barrier properties of the multilayer film. To understand the gas and water barrier improvement of the multilayer films, a microscopic observation of the films and an analysis of the microstructure by DSC and XRD have been performed with mechanical properties measurements.

[pt] As embalagens de medicamentos acondicionam e protegem os fármacos, sendo que alterações nos materiais de embalagem têm impacto crítico no desempenho do produto. Os blisters, que consistem de um tipo de embalagem primária de filmes poliméricos, entram em contato direto com o medicamento. A caracterização dos materiais de embalagens primárias é o principal meio de garantir a adequação dos mesmos ao uso pretendido. Reconhecendo essa necessidade, a nova farmacopeia dos Estados Unidos, que entrará em vigor em 2020, amplia suas considerações para caracterização de embalagens. Contudo, o novo documento ainda apresenta limitações de abrangência das recomendações técnicas e não considera filmes multicamadas, os quais são amplamente utilizados na indústria. No presente trabalho, cinco tipos de filmes para embalagem foram caracterizados por meio da Calorimetria Exploratória Diferencial e Espectroscopia no Infravermelho, ambas mencionadas nas farmacopeias; e também, para determinar os limites térmicos dos materiais avaliados, pela Análise Termogravimétrica. Com a inexistência de referências para filmes em multicamadas, os resultados foram comparados com divergentes valores publicados na literatura. Identificou-se, nos cinco materiais analisados, a existência de um plastificante não informado pelos fabricantes. O estudo realizado confirma a importância da caracterização dos blisters, apontando para a necessidade tanto da ampliação das recomendações da farmacopeia para inclusão de novos materiais e filmes multicamadas, quanto da produção de materiais de referência para os polímeros empregados nas embalagens. / [en] Pharmaceutical packaging wraps and protects drugs, and changes in packaging materials have a critical impact on product performance. Blisters, which consist of one type of primary packaging of polymer films, come into direct contact with the drug. The characterization of the primary packaging materials is an essential strategy for ensuring that they are suitable for the intended use. Recognizing this need, the new United States Pharmacopeia, which will come into effect in 2020, expands its considerations for characterization of packaging. However, the new document still contains limitations on the scope of the technical recommendations and does not consider multilayer films, which are widely used in industries. In the present work, five types of packaging films were characterized by Differential Scanning Calorimetry and Infrared Spectroscopy, both mentioned in the pharmacopeias; and also, to determine the thermal limits of the evaluated materials, by the Thermogravimetric Analysis. With the lack of references for multilayer films, the results were compared with divergent values published in the literature. It was identified, in the five materials analyzed, the existence of a plasticizer not identified by the manufacturers. This study confirms the importance of the characterization of the blisters, pointing to the need to not only expand the recommendations of the pharmacopeia, but also to include new materials and multilayer films, and the production of reference material for the polymers used in packages.

O objetivo geral deste trabalho foi explorar a versatilidade de filmes multicamadas de polieletrólitos (PEM) e suas aplicações em sistemas de entrega de drogas e como filmes funcionais para aplicações biomédicas. Filmes PEM montados pela técnica de camada por camada (layer­-by­-layer, LbL), foram explorados em três aplicações principais. Na primeira, foi explorado o desenvolvimento de um protocolo de funcionalização em filmes de poli(alilamina)/poli (estireno sulfonato), PAH/SPS. Os parâmetros de construção do filme para biotinilação dos grupamentos amina do PAH foram otimizados e aplicados na captura e detecção do antígeno específico da próstata (PSA), na concentração de 100 a 0,1 ng/mL, usando pontos quânticos (Qdots). Em comparação com outros trabalhos, este sistema apresentou uma boa sensibilidade na detecção de PSA, dentro do limite de detecção clínica de 0,4 a 0,1 ng/mL. A segunda aplicação envolveu o desenvolvimento de filmes de sacrifício baseados nas interações naturais da mucina submandibular bovina e da lectina, jacalina (BSM/JAC). Filmes de BSM/JAC apresentaram estabilidade quando submetidos a uma ampla faixa de pH (pH 3-­-9) e em solução de alta força iônica (5 M NaCl). A dissolução dos filmes BSM/JAC pôde ser seletivamente desencadeada mediante à incubação em solução de melibiose, 37 °C, pH 7,4, sem apresentar citotoxicidade às células. Na última parte deste trabalho, a incorporação de lipossomos ecogênicos (ELIP) em mochilas celulares foi investigada. Mochilas celulares são \"patches\" de 7­-10 µm de diâmetro que podem ser fabricados por meio de deposição alternada de polímeros utilizando-­-se a técnica de LbL, sobre uma matriz pré­-moldada obtida por fotolitografia, a fim de criar um sistema composto por três multicamadas estratificadas: uma região de liberação, para promover o destacamento do substrato, uma região de carga de droga, e uma região adesiva às células. O uso de ELIP permitiu incorporação de até 9x mais doxorrubicina (DOX) se comparado com o fármaco livre em solução absorvido pelos dos filmes. A liberação de DOX pelos filmes foi monitorado por 25 dias. Mochilas contendo ELIP-­DOX foram então aderidos a monócitos, e sua viabilidade monitorados por 72h. Mochilas vazias mostraram diminuir a proliferação de monócitos ao longo das 72 horas, enquanto mochilas carregadas com ELIP-­DOX mostraram uma diminuição dramática na população celular, apontando uma potencialização dos efeitos da droga pela sua proximidade com as células. / The overall goal of this thesis was to exploit the versatility of polyelectrolite multilayers (PEM) to be applied in drug delivery systems and biofunctionalizable films for biomedical applications. PEM films assembled by the layer-by­-layer technique were explored in three main applications. In the first part of this work, the development of a functionalization protocol of poly(allylamine)/poly(styrene sulfonate), PAH/SPS was explored. The optimal film parameters to the use of biotinylated multilayers were applied for the capture and detection of prostate specific antigen (PSA) protein in the range of 100 to 0.1 ng/mL, by using quantum dots. Compared to previous work, this system presented a good sensitivity for PSA detection that is within the clinical limit range of 0.4 to 0.1 ng/mL. The second application involved the creation of a novel sacrificial multilayer film. Films based in natural interactions of bovine submaxillary mucin and the lectin jacalin, BSM/JAC were assembled. BSM/JAC films showed stability when underwent a wide rage of pH (pH 3 to 9) and high ionic strength (5 M NaCl) solutions. BSM/JAC dissolution could be triggered released by incubation in melibiose at 37 °C in pH 7.4 buffer, without cytotoxicity. In the last part of this work the incorporation of echogenic liposomes (ELIP) into cell backpacks was investigated. Cell backpacks are 7-10 µm diameter patches that can be fabricated through LbL polymer deposition onto a photopatterned array to create a stacked composite of three stratified multilayer systems: a releasable region for easy detachment from the substrate, a drug payload region, and a cell adhesive region. The use of ELIP allowed up to 9x more doxorubicin (DOX) loading when compared to free drug in solution adsorbed through the films. DOX release from films was monitored for over 25 days. ELIP­-DOX backpacks were then attached to mouse monocytes and their viability monitored by 72h. Empty backpacks showed to decrease monocytes proliferation over the course of 72h, while ELIP­-DOX backpacks showed a dramatic decrease in cell population, showing that DOX effects were enhancement in drug potency by its proximity.

Les taux élevés de mortalité et de morbidité associés aux maladies vasculaires en font des pathologies dont les conséquences physiopathologiques, chirurgicales et socio-économiques sont d’une importance majeure pour le système de santé. Malgré leurs avantages, la disponibilité limitée des vaisseaux autologues a conduit au développement de prothèses synthétiques. Cependant, leur surface hautement thrombogène limite leur utilisation dans la substitution des vaisseaux de petit calibre (< 6 mm). De ce fait, à cause de leur obstruction précoce, la reconstitution d’une surface luminale proche de l’endothélium natif est incontournable. Pourtant, les revêtements de surface actuellement disponibles possèdent de médiocres qualités de rétention des néo-endothélium lorsqu’ils sont soumis à des contraintes de cisaillement physiologiques. Dans ce travail, nous proposons un substitut vasculaire de petit calibre endothélialisé réalisé à partir de trois éléments : 1) une matrice préparée à partir d’une artère ombilicale désendothélialisée, 2) un recouvrement de surface innovant constitué du film multicouche de polyélectrolytes (MPE) (PAH-PSS)3-PAH, et 3) un néo-endothélium constitué de cellules endothéliales matures ou progénitrices. Les études in vitro menées sur ces substituts ont montré que la formation, la rétention sous contraintes de cisaillement et la fonctionnalité du néoendothélium élaboré sur la surface luminale étaient améliorées par le film MPE. L’implantation du substitut par pontage termino-latéral sur le lapin a montré que le cahier des charges imputé aux substituts de petit calibre était rempli, principalement en termes de perméabilité et de diamètre, mais aussi de résistance à la suture et aux infections. En conclusion, le film MPE favorise le développement d’un substitut vasculaire de petit diamètre perméable à « long » terme et qui pourrait répondre aux exigences des chirurgiens / Vascular diseases with their high rate of mortality and morbidity belong to the pathologies involving important socio-economic factors for health system. Despite the advantages of autografts, the limited availability of autologous vessels has led to the development of synthetic prostheses. However, their high thrombogenic surface limits their use as small calibre vascular substitutes (< 6 mm). To prevent narrowing of small diameter vascular grafts, the reconstruction of a luminal surface close to the native endothelium is essential. However, the retention of the neo-endothelium subjected to shear stress is poor on the coatings currently available. In this work, we developed a small calibre endothelialized vascular substitute thanks to three elements: 1) a natural matrix prepared from umbilical artery, 2) an innovative coating based on the polyelectrolytes multilayer film (PEM) (PAH-PSS)3-PAH, and 3) used for cell culture of mature or progenitor endothelial cells. In vitro studies have shown that the formation, the retention under shear stress and the endothelial function of the neoendothelium on the luminal surface were improved by PEM film. The anastomosis of this substitute on rabbits has shown that the specifications essential to small calibre vascular grafts were reached, mainly in terms of permeability and diameter but also of resistance to suture and infections. In conclusion, PEM films helped us to develop a small diameter vascular substitute with long term patency

O objetivo geral deste trabalho foi explorar a versatilidade de filmes multicamadas de polieletrólitos (PEM) e suas aplicações em sistemas de entrega de drogas e como filmes funcionais para aplicações biomédicas. Filmes PEM montados pela técnica de camada por camada (layer­-by­-layer, LbL), foram explorados em três aplicações principais. Na primeira, foi explorado o desenvolvimento de um protocolo de funcionalização em filmes de poli(alilamina)/poli (estireno sulfonato), PAH/SPS. Os parâmetros de construção do filme para biotinilação dos grupamentos amina do PAH foram otimizados e aplicados na captura e detecção do antígeno específico da próstata (PSA), na concentração de 100 a 0,1 ng/mL, usando pontos quânticos (Qdots). Em comparação com outros trabalhos, este sistema apresentou uma boa sensibilidade na detecção de PSA, dentro do limite de detecção clínica de 0,4 a 0,1 ng/mL. A segunda aplicação envolveu o desenvolvimento de filmes de sacrifício baseados nas interações naturais da mucina submandibular bovina e da lectina, jacalina (BSM/JAC). Filmes de BSM/JAC apresentaram estabilidade quando submetidos a uma ampla faixa de pH (pH 3-­-9) e em solução de alta força iônica (5 M NaCl). A dissolução dos filmes BSM/JAC pôde ser seletivamente desencadeada mediante à incubação em solução de melibiose, 37 °C, pH 7,4, sem apresentar citotoxicidade às células. Na última parte deste trabalho, a incorporação de lipossomos ecogênicos (ELIP) em mochilas celulares foi investigada. Mochilas celulares são \"patches\" de 7­-10 &#181;m de diâmetro que podem ser fabricados por meio de deposição alternada de polímeros utilizando-­-se a técnica de LbL, sobre uma matriz pré­-moldada obtida por fotolitografia, a fim de criar um sistema composto por três multicamadas estratificadas: uma região de liberação, para promover o destacamento do substrato, uma região de carga de droga, e uma região adesiva às células. O uso de ELIP permitiu incorporação de até 9x mais doxorrubicina (DOX) se comparado com o fármaco livre em solução absorvido pelos dos filmes. A liberação de DOX pelos filmes foi monitorado por 25 dias. Mochilas contendo ELIP-­DOX foram então aderidos a monócitos, e sua viabilidade monitorados por 72h. Mochilas vazias mostraram diminuir a proliferação de monócitos ao longo das 72 horas, enquanto mochilas carregadas com ELIP-­DOX mostraram uma diminuição dramática na população celular, apontando uma potencialização dos efeitos da droga pela sua proximidade com as células. / The overall goal of this thesis was to exploit the versatility of polyelectrolite multilayers (PEM) to be applied in drug delivery systems and biofunctionalizable films for biomedical applications. PEM films assembled by the layer-by­-layer technique were explored in three main applications. In the first part of this work, the development of a functionalization protocol of poly(allylamine)/poly(styrene sulfonate), PAH/SPS was explored. The optimal film parameters to the use of biotinylated multilayers were applied for the capture and detection of prostate specific antigen (PSA) protein in the range of 100 to 0.1 ng/mL, by using quantum dots. Compared to previous work, this system presented a good sensitivity for PSA detection that is within the clinical limit range of 0.4 to 0.1 ng/mL. The second application involved the creation of a novel sacrificial multilayer film. Films based in natural interactions of bovine submaxillary mucin and the lectin jacalin, BSM/JAC were assembled. BSM/JAC films showed stability when underwent a wide rage of pH (pH 3 to 9) and high ionic strength (5 M NaCl) solutions. BSM/JAC dissolution could be triggered released by incubation in melibiose at 37 °C in pH 7.4 buffer, without cytotoxicity. In the last part of this work the incorporation of echogenic liposomes (ELIP) into cell backpacks was investigated. Cell backpacks are 7-10 &#181;m diameter patches that can be fabricated through LbL polymer deposition onto a photopatterned array to create a stacked composite of three stratified multilayer systems: a releasable region for easy detachment from the substrate, a drug payload region, and a cell adhesive region. The use of ELIP allowed up to 9x more doxorubicin (DOX) loading when compared to free drug in solution adsorbed through the films. DOX release from films was monitored for over 25 days. ELIP­-DOX backpacks were then attached to mouse monocytes and their viability monitored by 72h. Empty backpacks showed to decrease monocytes proliferation over the course of 72h, while ELIP­-DOX backpacks showed a dramatic decrease in cell population, showing that DOX effects were enhancement in drug potency by its proximity.

Polyelectrolyte multilayer capsules fabricated by layer-by-layer (LbL) self-assembly technique consistsing of core-shell structure have emerged as potential drug delivery systems along with their applications in micro-reactors, cosmetics, vaccines and antimicrobial coatings. Various ligands and stimuli responsive entities can be incorporated into the core and shell of the capsules for targeted delivery and/or controlled release applications. Though multilayer capsules have been studied extensively as delivery systems, their utility for encapsulation of hydrophobic drugs and multiple drugs have not been explored in detail so far. Application of traditional polyelectrolyte capsules has several limitations, which renders them inapplicable for encapsulation of multiple drugs, hydrophobic drugs and also for releasing drugs on demand without addition of the external photothermal agents such as metal nanoparticles into the shells of the capsules. Thus, in this thesis, an attempt has been made to develop novel multifunctional multilayered capsules to overcome the above mentioned limitations. We have formulated two novel methods to functionalize the core with cyclodextrin molecules and the shell of the capsules with two-dimensional material, graphene oxide (GO). The properties such as high surface area along with π bonds, broad NIR-absorption, superior photothermal conversion and antimicrobial activity of graphene oxide has been explored and it has been demonstrated that 2-D graphene oxide is unique compared to the regular polyelectrolytes. By functionalizing the shell of capsules with GO as one of the layer material, a simple and efficient way for encapsulating multiple drugs into core and shell of the capsules is achieved by utilizing the large surface area and amphiphilic nature of GO. Based on the unique optical absorption and photothermal conversion properties of GO, we have demonstrated a facile route for near-infrared (NIR)-laser triggered release with low laser power. In the second part, functionalization of the hollow core of the capsules has been functionalized using cylodextrin (CD)-incorporated CaCO3 porous sacrificial templates, where both CD-CaCO3 and CD-modified capsules are used as high efficient carriers for hydrophobic drugs. In the third part, synergistic antimicrobial therapy was achieved using composite graphene oxide/polymer LbL films by combining the intrinsic antimicrobial activity and photothermal conversion ability of graphene oxide and the results depicted superior antimicrobial activity towards E. coli. These composite films also can be used as efficient antimicrobial coatings on biomedical devices or implants. The thesis has been divided into five chapters based on the individual works. In Chapter 1, a brief review on the history of LbL self-assembly, mechanism of self-assembly along with factors affecting the process have been discussed. Followed by a brief discussion about the fabrication of multilayered hollow capsules (core-shell structure), their applications in drug delivery and fabrication of multifunctional multilayered capsules through core and shell have been discussed. Finally, recent developments in LbL self-assembly and multilayered hollow capsules using carbon based materials (fullerenes, carbon nanotubes and graphene oxide) and their biomedical applications have been presented. Chapter 2 deals with the study on fabricating multifunctional multilayered capsules for facile encapsulation of multiple drugs into the capsules, which is achieved by functionalizing the capsules with graphene oxide (GO) as one of the layer materials. The GO composite capsules exhibited unique permeability properties compared to traditional multilayered capsules made of two polyelectrolytes. Multiple drugs could be simultaneously encapsulated in the capsules in a simple and effective manner. These capsules were found to exhibit a “core-shell” loading property for encapsulation of dual drugs into the core and shell of the capsules respectively. In addition, the graphene oxide composite capsules showed excellent biocompatibility towards MCF-7 cells. This study is the first one that demonstrates the potential of hybrid polyelectrolyte capsules without the use of micelles or polymer-drug conjugates for multi-drug encapsulation. Chapter 3 deals with the development of a facile route for near-infrared (NIR)-light triggered release of encapsulated drugs from the multilayered capsules via incorporation of graphene oxide (GO) into layer-by-layer (LbL) assembled capsules without addition of any external additives such as metal nanoparticles (NPs) or carbon nanotubes (CNTs) into the shells of the capsules. Till now, there is no report on light-responsive drug delivery system by utilizing the NIR-optical absorption properties of GO. Here, graphene oxide (GO) plays a dual role, serving as a structural component of LbL capsules as well as strong NIR-light absorbing agent, which efficiently converts absorbed light into heat. Upon NIR-laser irradiation, the microcapsules were opened in “point-wise fashion” due to local heating caused by laser irradiation. The rupturing mechanism of the capsules has been clearly demonstrated using confocal fluorescence microscopy and high resolution transmission electron microscopy. The light-triggering ability of these capsules has been applied successfully to release the encapsulated anticancer drug, doxorubicin. Chapter 4 deals with simple and versatile simple routes for encapsulation of model hydrophobic drug. Encapsulation of hydrophobic drugs in pharmaceutical industries is always a big challenge due to limited number of available drug carrier systems and poor aqueous solubility of hydrophobic drugs. Here, by combining the special properties of cyclodextrins (CDs) with biodegradable inorganic calcium carbonate microparticles, the hybrid CD-CaCO3 mesoporous microparticles have been prepared for the first time. These CD-CaCO3 microparticles were utilized as sacrificial templates to prepare CDs-modified LbL capsules. We have demonstrated that both the hybrid CD-CaCO3 microparticles and CDs-modified capsules are potential carriers for encapsulation of model hydrophobic drugs (self-fluorescent coumarine and nile red dyes) with high loading efficiency using supramolecular host-guest interaction between entrapped CDs and hydrophobic dye molecules. Compared with other inorganic drug carrier systems (mesoporous silica), CaCO3 porous particles have better biocompatibility, biodegradability and cost-effective and without use of any organic solvents. Both these hybrid CD-CaCO3 microparticles and CDs-modified capsules can be good candidates for encapsulation of hydrophobic drugs without involving extreme chemical conditions for fabrication. Chapter 5 deals with development of facile synergistic method for killing pathogenic bacteria by combining the intrinsic antimicrobial activity of graphene oxide (GO) and unique photothermal conversion property of GO into a single material. We fabricated composite LbL films of graphene oxide (GO) and poly(allylamine hydrochloride) (PAH) films. Antimicrobial activity of these GO composite films has been studied using Escherichia coli (E. coli) cells by varying number of deposited layers on glass slides (20 to 80 layers) and results suggest that by increasing the number of deposited layers, antimicrobial activity is also increased gradually. Based on the unique optical properties of GO, photothermal therapy have been carried out for killing of E. coli using GO composite films by varying number of deposited layers (20 to 80 layers) by irradiation of NIR-pulse laser at 1064 nm wavelength (Nd:YAG, 10 ns pulse, 10 Hz). The photothermal results revealed the enhanced antimicrobial activity compared to GO composite films alone without NIR-laser irradiation. The synergistic photothermal killing ability along with intrinsic antimicrobial activity of GO films results in much faster killing compared to films alone.

In the present thesis, magnetization reversal in both out-of-plane and in-plane magnetized thin lms and in devices fabricated out of those lms are explored. Pt/Co/Pt stacks with ultrathin Co layer were in-estimated initially for understanding their magnetic properties in this thesis. These perpendicular magnetized systems are good candidates for magnetic hard disc drives due to their large anisotropy, which may allow miniaturization of magnetic data storage devices. The spin Hall e ect mediated current-induced magnetization reversal in patterned Pt/Co/Pt devices were extensively investigated. Investigation of the magnetization reversal by means of a current instead of a magnetic eld is necessary to explore the possibilities of solid state magnetic memory devices. This is the primary motivation behind the investigation of current-induced magnetization reversal in Pt/Co/Pt system, in this thesis. Another important proposal for magnetic data storage is the race track memory, where the domain walls separating magnetic domains (in in-plane or out-of-plane magnetized materials) are moved by using a current. This involves a great deal of understanding of the domain wall motion in Nano-conduits under applied magnetics ends, and currents and also its interaction with engineered geometrical features. In this thesis work, magnetic led-driven domain wall pinning and deepening experiments on in-plane magnetized nanowires of perm alloy were performed to un-distend this interaction and the e act of domain wall chirality. In chapter 1, a general introduction to di errant data storage technologies and the current progress in the leg of spintronic is presented. This will highlight a perspective of this thesis work with respect to the present day research in spintronic and magnetization reversal studies. In chapter 2, a basic background of magnetism using the micromag-netic framework is illustrated. A brief introduction to magnetic domain walls is also presented. The Landau-Lifshitz-Gilbert dynamical equation is discussed and some case studies applied to a single domain particle with uniaxial anisotropy under the effect of spin-orbit torque are illu trated. The basics of spin-orbit coupling leading to spin Hall e ect is also explain In chapter 3, most of the essential experimental tools along with their basic working principles are described. Extensive e orts have been in-vested in designing and building the experimental tools. These include custom designs of a sputter deposition system, an ultra-high vacuum chamber for pulsed laser ablation, a magneto-optic Kerr e ect magne-tometer, a Kerr imaging system and a magneto-transport setup. All of these experimental setups have been automated, details of which are brie y discussed in this chapter. The Kerr imaging system was designed to measure hysteresis loops, observe domain wall motion and to measure domain wall velocity under applied magnetic elds and electric current. The magneto-transport setup was used for studying the domain wall pinning and depinning experiments in permalloy nanowires. In chapter 4, the optimization process for obtaining perpendicular mag-netic anisotropy in Pt/Co/Pt lms is described. The spin reorientation transition with varying thickness of Co (from 1.5 nm down to 0.35 nm) was studied. The magnetization easy axis direction changes from in-plane to out-of-plane as the thickness of Co is reduced. The dependence of Curie temperatures of ultrathin Co lms, with thickness as low as 0.35 nm, on the underlayer Pt thickness and its crystallinity was studied in detail. The e act of Ta but err layer on the texture of the Pt lm, and on the Curie temperature of the Pt/Co/Pt system was evaluated. To gain further insight of the role of the bottom Pt/Co and the top Co/Pt interfaces, ultrathin Cu lbs were inserted at the respective interfaces, and the anisotropy and magnetization reversal behaviour of these lbs were investigated. In chapter 5, studies on current-induced magnetization reversal in mi-corn sized wires of Pt/Co/Pt trilete is presented. The spin Hall e act assisted spin-orbit torque was used to reversibly switch the magnetization of these devices with and without the help of an external magnetic led. Since both the top and bottom layers are Pt, any contribution from Rashia e act towards spin-orbit torque could be ignored. By preparing devices with unequal top and bottom Pt thicknesses, a net spin-orbit torque could be applied to the magnetization of the Co layer. The thickness gradient/induced anisotropy in the Co layer was utilized to experimentally investigate current-induced deterministic switching. Sin-gel domain simulations with spin-orbit torque were also carried out to understand the mechanism of deterministic switching of magnetization in Pt/Co/Pt devices. This study is expected to have made sign cant contributions and to open up the possibilities of further investigation in the studies of spin-orbit torque in Pt/Co/Pt systems for solid state magnetic memory devices. In chapter 6, magnetic led-induced reversal in systems with in-plane magnetic anisotropy is presented. Here the e act of the width of a Nanos-trip on the anisotropy of a soft magnetic material like perm alloy was in-estimated. By introducing a nucleation pad to one end of the perm alloy nanowire, a single domain wall was generated at the junction with apple-cation of a proper magnetic led sequence. This domain wall could be in-jested into the nanowire by a magnetic led and pinned at a geometrical constriction inside the nanowire. The statistics of domain wall pinning and deepening processes indicated two di errant types of domain walls involved in the reversal process. With the assistance of micro magnetic simulations the domain walls were ident end as vortex walls of di errant chirality’s. Thus the interaction of domain walls with a Nano constriction and its dependence on the chirality of domain walls are understood. In chapter 7, a brief summary of the results obtained during the course of investigations is presented. An outlook presented at the end will help the readers of this thesis to understand the important research problems in this area and their potential future aspects.

Due to the ever-increasing worldwide consumption of memory for digital information, new technologies for higher capacity and faster data storage systems have been the focus of research and development. A step towards achieving higher data storage densities or magnetic recording media is the concept of bit patterned media, where the magnetic recording layer is divided up into magnetically isolated bit units. This approach is one of the most promising technologies for increasing data storage densities and could be implemented by nanostructuring the wafer. Therefore, the fabrication of the appropriate nanostructures on a small scale and then be able to manufacture these structures on an industrial scale is one of the problems where science and industry are working on a solution. In addition, the answer to the open question about the influence that patterning on the nano length scale has on the magnetic properties is of great interest. The main goal of this thesis is to answer the open question, which magnetic properties can be tailored by a modification of the surface texture on the nanometre length scale. For this purpose the following properties: anisotropy, remanence, coercivity, switching field distribution, saturation magnetisation, Gilbert damping, and inhomogeneous linebroadening were compared between planar two dimensional thin ferromagnetic films and three dimensional magnetic structures. In addition, the influences of the tailored morphology on the intergranular or the exchange coupling between the structures, which is called interdot exchange coupling, was investigated. For the ferromagnetic thin films, the focus of the investigations was on the granular CoCrPt:SiO2 and [Co/Pd] layer, which currently are the state-of-the-art material for magnetic data storage media. These materials are characterised by their high coercivity and high perpendicular anisotropy, which has a low spatial distribution in the preferred direction of magnetisation. In this work the pre-structured GaSb(001) substrate with self-assembled periodic nanocone structures at the surface are used. The preparation by ion beam erosion of these structures is simple, fast, and highly reproducible and therefore this method is particularly beneficial for fundamental research. To compare the 2D thin films with the 3D magnetic structures, besides the pre-structured specimen, planar samples were also fabricated. The first sample series prepared was coated by Py. Due to the fact that the magnetic properties of this material are well-known, it was also possible to do some OOMMF simulations in addition to the VNA-FMR and MOKE measurements. Afterwards two planar samples with CoCrPt and CoCrPt:SiO2 were prepared. The planar CoCrPt:SiO2 samples were Co+ ion implanted to study the influence of such irradiation on the intergranular and interdot exchange coupling, switching field distribution, and in particular on the spin dynamics. Moreover, both samples were measured by TRMOKE in order to obtain information about the spin dynamics. Subsequently, the perpendicular storage media materials CoCrPt:SiO2 and [Co/Pd] were deposited on a prestructured GaSb(001) nanocone substrate surface. These sample series were measured by MOKE, SQUID, and vector-VSM. The measurements demonstrate the influence of the periodicity and height of the nanocones on the intergranular and interdot exchange coupling. They also show the reorientation of the magnetisation with respect to the curvature of the substrate template and furthermore, the morphology-induced influences on the magnetic domains. From the comparison between the results for the planar and the pre-structured samples, a decrease of the interdot exchange coupling was observed, which scales together with the periodicity of the nanocone pattern. In addition, it was shown that for all samples with thin magnetic films on nanocones,the magnetisation aligns along the curvature of the underlying nanocone structure. For Py on nanocones, planar granular CoCrPt:SiO2, and planar granular CoCrPt, measurements by VNA-FMR and TRMOKE could be carried out, which yielded information about the spin dynamics. The results obtained for both of the planar sample are comparable to values from the literature for the Gilbert damping. The results for the Py samples showed that the commonly used 2D model resonance condition is, in case of a 3D magnetic structure, no longer valid due to the alignment of the magnetisation along the underlying substrate structure and therefore an new model has to be derived. / Aufgrund des weltweiten, immer weiter steigenden Bedarfs an Speicherplatz von digitalen Information, sind neue Technologien für größere und schnellere Speichermedien im Fokus von Forschung und Entwicklung. Ein Schritt hin zu einer höheren Speicherdichte in der magnetischen Datenspeicherung ist dabei das sogenannte Konzept der ”Bit patterned media”, das definierte Informationseinheiten auf regelmäßig angeordneten Nanostrukturen beschreibt. Dieser Ansatz ist einer der derzeit vielversprechendsten Optionen die Speicherdichte zu erhöhen. Dabei ist die Herstellung der benötigten Nanostrukturen und deren Skalierung hin zu makroskopischen Dimensionen eines der Probleme an deren Lösung die Wissenschaft und Industrie derzeit arbeitet. Desweiteren ist die Antwort auf die noch offene Frage nach der Beeinflussung der nanoskaligen Strukturen auf die magnetischen Eigenschaften von großem Interesse. Das Hauptziel in dieser Arbeit ist es, einen Beitrag zur Beantwortung der Frage, welche magnetischen Eigenschaften sich durch eine Veränderung der Oberflächenstruktur im Nanometerbereich beeinflussen lassen, zu leisten. Hierzu wurden die folgenden Eigenschaften, wie zum Beispiel die Anisotropie, Remanenz,Koerzitivität, Schaltfeldverteilung, Sättigungsmagnetisierung, Gilbertdämpfung und inhomogene Linienverbreiterung von planaren zweidimensionalen dünnen ferromagnetische Schichten mit denen von dreidimensionalen magnetischen Strukturen verglichen. Zusätzlich wurde der Einfluss der angegpassten Morphologie auf die intergranularen- beziehungsweise auf die zwischen den Strukturen wirkende (interdot) Austauschkopplung untersucht. Der Hauptaugenmerk bei den ferromagnetisch dünnen Schichten lag dabei auf den granularen CoCrPt:SiO2 und [Co/Pd] Filmen, die heutzutage ein Standardmaterial für die magnetischen Speichermedien darstellen. Diese Materialien zeichnen sich durch eine hohe Koerzivität und senkrechte Anisotropie, mit geringer räumlicher Verteilung der Vorzugsrichtung der Magnetisierung, aus. Die hier vorgestellten vorstrukturierten GaSb(001) Substrate mit selbstordnenden periodischen Nanokegeln auf der Oberfläche, sind mittels Ionenstrahlerosion einfach, schnell und sehr gut reproduzierbar herzustellen. Deshalb ist diese Methode besonders für die Grundlagenforschung von Vorteil. Um einen Vergleich zwischen 2D Filmen und 3D Strukturen ziehen zu können, wurden neben den vorstrukturierten Substraten auch planare Proben beschichtet. Eine erste Versuchsreihe wurde mit einem dünnen Py Film präpariert. Da dessen magnetische Eigenschaften wohlbekannt sind, konnten neben den Untersuchungen mit VNA-FMR und MOKE auch einige OOMF Simulationen erstellt werden. Danach wurden zwei Proben mit planarem CoCrPt beziehungsweise CoCrPt:SiO2 untersucht. Bei den planaren CoCrPt:SiO2 Proben wurden außerdem noch Co+ Ionen implantiert, um deren Auswirkungen auf die intergranulare Austauschkopplung, Schaltfeldverteilung und besonders auf die Spindynamik zu bestimmen. Bei beiden Probensystemen konnte zusätzlich die Spindynamik mittels zeitaufgelöstem MOKE gemessen werden. Im Anschluss wurden die beiden senkrechten Speichermedien CoCrPt:SiO2 and [Co/Pd] auf Substraten mit Nanokegeln vorstrukturierten GaSb(001) Oberflächen abgeschieden. Diese Proben wurden mit MFM, MOKE, SQUID und Vektor-VSM vermessen. Aus den Messungen konnnten dann die Einflüsse auf die intergranulare- beziehungsweise interdot Austauschkopplung in Abhängigkeit von der Periodizität und Höhe der Nanokegel bestimmt werden, sowie die Umorientierung der Magnetisierung bezüglich der Substratkrümmung und den Morphologie induzierten Einfluss auf die magnetischen Domänen. Anhand der Vergleiche zwischen den Messungen der planaren und den vorstrukturierten Proben konnte eine Verringerung der Austauschkopplung zwischen den Strukturen gezeigt werden, die mit der Nanokegelstrukturperiodizität skaliert. Außerdem wurde in allen dünnen magnetischen Filmen auf Nanokegeln gezeigt, dass die Magnetisierung sich in Abhängigkeit der darunterliegenden Struktur ausrichtet. Bei den Py auf Nanokegeln, den planaren CoCrPt und dem planaren CoCrPt:SiO2 Proben konnten außerdem mit VNA-FMR und TRMOKE Informationen bezüglich der Spindynamik gemessen werden. Die erzielten Ergebnisse, der beiden planaren Proben, sind vergleichbar mit denen, aus der Literatur bekannten Werten, für die Gilbertdämpfung. Darüber hinaus wurde durch die Messungen an den Py Proben gezeigt, dass die Theorie, des bisher genutzten 2D Modells, nicht mehr gültig ist, da sich die Magnetisierung entlang der Substratstruktur ausrichtet, und deshalb ein neues Model aufgestellt werden muss.

Due to the ever-increasing worldwide consumption of memory for digital information, new technologies for higher capacity and faster data storage systems have been the focus of research and development. A step towards achieving higher data storage densities or magnetic recording media is the concept of bit patterned media, where the magnetic recording layer is divided up into magnetically isolated bit units. This approach is one of the most promising technologies for increasing data storage densities and could be implemented by nanostructuring the wafer. Therefore, the fabrication of the appropriate nanostructures on a small scale and then be able to manufacture these structures on an industrial scale is one of the problems where science and industry are working on a solution. In addition, the answer to the open question about the influence that patterning on the nano length scale has on the magnetic properties is of great interest. The main goal of this thesis is to answer the open question, which magnetic properties can be tailored by a modification of the surface texture on the nanometre length scale. For this purpose the following properties: anisotropy, remanence, coercivity, switching field distribution, saturation magnetisation, Gilbert damping, and inhomogeneous linebroadening were compared between planar two dimensional thin ferromagnetic films and three dimensional magnetic structures. In addition, the influences of the tailored morphology on the intergranular or the exchange coupling between the structures, which is called interdot exchange coupling, was investigated. For the ferromagnetic thin films, the focus of the investigations was on the granular CoCrPt:SiO2 and [Co/Pd] layer, which currently are the state-of-the-art material for magnetic data storage media. These materials are characterised by their high coercivity and high perpendicular anisotropy, which has a low spatial distribution in the preferred direction of magnetisation. In this work the pre-structured GaSb(001) substrate with self-assembled periodic nanocone structures at the surface are used. The preparation by ion beam erosion of these structures is simple, fast, and highly reproducible and therefore this method is particularly beneficial for fundamental research. To compare the 2D thin films with the 3D magnetic structures, besides the pre-structured specimen, planar samples were also fabricated. The first sample series prepared was coated by Py. Due to the fact that the magnetic properties of this material are well-known, it was also possible to do some OOMMF simulations in addition to the VNA-FMR and MOKE measurements. Afterwards two planar samples with CoCrPt and CoCrPt:SiO2 were prepared. The planar CoCrPt:SiO2 samples were Co+ ion implanted to study the influence of such irradiation on the intergranular and interdot exchange coupling, switching field distribution, and in particular on the spin dynamics. Moreover, both samples were measured by TRMOKE in order to obtain information about the spin dynamics. Subsequently, the perpendicular storage media materials CoCrPt:SiO2 and [Co/Pd] were deposited on a prestructured GaSb(001) nanocone substrate surface. These sample series were measured by MOKE, SQUID, and vector-VSM. The measurements demonstrate the influence of the periodicity and height of the nanocones on the intergranular and interdot exchange coupling. They also show the reorientation of the magnetisation with respect to the curvature of the substrate template and furthermore, the morphology-induced influences on the magnetic domains. From the comparison between the results for the planar and the pre-structured samples, a decrease of the interdot exchange coupling was observed, which scales together with the periodicity of the nanocone pattern. In addition, it was shown that for all samples with thin magnetic films on nanocones,the magnetisation aligns along the curvature of the underlying nanocone structure. For Py on nanocones, planar granular CoCrPt:SiO2, and planar granular CoCrPt, measurements by VNA-FMR and TRMOKE could be carried out, which yielded information about the spin dynamics. The results obtained for both of the planar sample are comparable to values from the literature for the Gilbert damping. The results for the Py samples showed that the commonly used 2D model resonance condition is, in case of a 3D magnetic structure, no longer valid due to the alignment of the magnetisation along the underlying substrate structure and therefore an new model has to be derived. / Aufgrund des weltweiten, immer weiter steigenden Bedarfs an Speicherplatz von digitalen Information, sind neue Technologien für größere und schnellere Speichermedien im Fokus von Forschung und Entwicklung. Ein Schritt hin zu einer höheren Speicherdichte in der magnetischen Datenspeicherung ist dabei das sogenannte Konzept der ”Bit patterned media”, das definierte Informationseinheiten auf regelmäßig angeordneten Nanostrukturen beschreibt. Dieser Ansatz ist einer der derzeit vielversprechendsten Optionen die Speicherdichte zu erhöhen. Dabei ist die Herstellung der benötigten Nanostrukturen und deren Skalierung hin zu makroskopischen Dimensionen eines der Probleme an deren Lösung die Wissenschaft und Industrie derzeit arbeitet. Desweiteren ist die Antwort auf die noch offene Frage nach der Beeinflussung der nanoskaligen Strukturen auf die magnetischen Eigenschaften von großem Interesse. Das Hauptziel in dieser Arbeit ist es, einen Beitrag zur Beantwortung der Frage, welche magnetischen Eigenschaften sich durch eine Veränderung der Oberflächenstruktur im Nanometerbereich beeinflussen lassen, zu leisten. Hierzu wurden die folgenden Eigenschaften, wie zum Beispiel die Anisotropie, Remanenz,Koerzitivität, Schaltfeldverteilung, Sättigungsmagnetisierung, Gilbertdämpfung und inhomogene Linienverbreiterung von planaren zweidimensionalen dünnen ferromagnetische Schichten mit denen von dreidimensionalen magnetischen Strukturen verglichen. Zusätzlich wurde der Einfluss der angegpassten Morphologie auf die intergranularen- beziehungsweise auf die zwischen den Strukturen wirkende (interdot) Austauschkopplung untersucht. Der Hauptaugenmerk bei den ferromagnetisch dünnen Schichten lag dabei auf den granularen CoCrPt:SiO2 und [Co/Pd] Filmen, die heutzutage ein Standardmaterial für die magnetischen Speichermedien darstellen. Diese Materialien zeichnen sich durch eine hohe Koerzivität und senkrechte Anisotropie, mit geringer räumlicher Verteilung der Vorzugsrichtung der Magnetisierung, aus. Die hier vorgestellten vorstrukturierten GaSb(001) Substrate mit selbstordnenden periodischen Nanokegeln auf der Oberfläche, sind mittels Ionenstrahlerosion einfach, schnell und sehr gut reproduzierbar herzustellen. Deshalb ist diese Methode besonders für die Grundlagenforschung von Vorteil. Um einen Vergleich zwischen 2D Filmen und 3D Strukturen ziehen zu können, wurden neben den vorstrukturierten Substraten auch planare Proben beschichtet. Eine erste Versuchsreihe wurde mit einem dünnen Py Film präpariert. Da dessen magnetische Eigenschaften wohlbekannt sind, konnten neben den Untersuchungen mit VNA-FMR und MOKE auch einige OOMF Simulationen erstellt werden. Danach wurden zwei Proben mit planarem CoCrPt beziehungsweise CoCrPt:SiO2 untersucht. Bei den planaren CoCrPt:SiO2 Proben wurden außerdem noch Co+ Ionen implantiert, um deren Auswirkungen auf die intergranulare Austauschkopplung, Schaltfeldverteilung und besonders auf die Spindynamik zu bestimmen. Bei beiden Probensystemen konnte zusätzlich die Spindynamik mittels zeitaufgelöstem MOKE gemessen werden. Im Anschluss wurden die beiden senkrechten Speichermedien CoCrPt:SiO2 and [Co/Pd] auf Substraten mit Nanokegeln vorstrukturierten GaSb(001) Oberflächen abgeschieden. Diese Proben wurden mit MFM, MOKE, SQUID und Vektor-VSM vermessen. Aus den Messungen konnnten dann die Einflüsse auf die intergranulare- beziehungsweise interdot Austauschkopplung in Abhängigkeit von der Periodizität und Höhe der Nanokegel bestimmt werden, sowie die Umorientierung der Magnetisierung bezüglich der Substratkrümmung und den Morphologie induzierten Einfluss auf die magnetischen Domänen. Anhand der Vergleiche zwischen den Messungen der planaren und den vorstrukturierten Proben konnte eine Verringerung der Austauschkopplung zwischen den Strukturen gezeigt werden, die mit der Nanokegelstrukturperiodizität skaliert. Außerdem wurde in allen dünnen magnetischen Filmen auf Nanokegeln gezeigt, dass die Magnetisierung sich in Abhängigkeit der darunterliegenden Struktur ausrichtet. Bei den Py auf Nanokegeln, den planaren CoCrPt und dem planaren CoCrPt:SiO2 Proben konnten außerdem mit VNA-FMR und TRMOKE Informationen bezüglich der Spindynamik gemessen werden. Die erzielten Ergebnisse, der beiden planaren Proben, sind vergleichbar mit denen, aus der Literatur bekannten Werten, für die Gilbertdämpfung. Darüber hinaus wurde durch die Messungen an den Py Proben gezeigt, dass die Theorie, des bisher genutzten 2D Modells, nicht mehr gültig ist, da sich die Magnetisierung entlang der Substratstruktur ausrichtet, und deshalb ein neues Model aufgestellt werden muss.