The diploma thesis deals with the measurement of electromagnetic fields by the meter NARDA NBM 550. The aim of the paper is to introduce the possibilities of measurement of the electromagnetic field by this device, to study the feasibility of communication with computer, to create control program and to check its functionality. A description of the electromagnetic field properties is followed by the identification of the device main functions. Additionally, the operating program is described together with the draft of measuring workplace with its realization. The results of probationary measurements are presented in the end of the thesis.

The diploma thesis deals with the experimental study of surface plasmon polaritons (SPPs) on nano-structures with the Au/Co/Au multilayer. Plasmonic structures were prepared by the electron beam lithography and by the focused ion beam. A Scanning optical near-field microscope was used for detection of surface plasmon polaritons. SPPs were confirmed by the experiment with different polarizations of the illuminating light. Furthermore, differences in plasmon interference wavelengths was measured for different surface dielectric functions. Finally, the decantation of the SPPs interference image was measured in dependence on the external magnetic field.

V této práci vytváříme jednoduchý systém pro rychlou textovou komunikaci (IM), který využívá technologii Near-Field Communication (NFC) ke zlepšení bezpečnosti a soukromí. V první části zkoumáme samotnou technologii NFC. Poté se věnujeme možnostem NFC v operačním systému Android pro chytrá mobilní zařízení a také existujícím aplikacím, které tyto možnosti využívají. Rovněž zkoumáme nejmodernější přístup k bezpečnému IM, zejména Signal Protocol a jeho open-source implementaci pro Android. Dále pak navrhujeme IM systém, který používá Signal Protocol pro šifrování zpráv a NFC pro výměnu kryptografického materiálu, aniž by vyžadoval použití telefonních čísel nebo důvěryhodnou třetí stranu. Nakonec předkládáme vzorovou implementaci klientské i serverové aplikace a zhodnocení vlastností tohoto systému z hlediska soukromí a bezpečí.

Ce travail concerne le développement d’un nouveau type de microscopie optique en champ proche (SNOM) basé sur la mise en œuvre de sondes dite actives qui utilisent le signal de génération de seconde harmonique (SHG) d’un petit nombre de molécules orientées. L’orientation de ces molécules est obtenue par l’application d’un champ électrique statique dans une jonction constituée d’une pointe métallique effilée placée à proximité d’un substrat conducteur et immergée dans une solution de molécules dipolaires non-linéaires. L’excitation laser de ces molécules localement orientées permet d’obtenir une polarisation non-lineaire à fréquence double qui constitue une nanosource de lumière intrinsèquement localisée et pouvant interagir avec le champ proche du substrat. Nous nous sommes intéressés à l’imagerie de nano-objets lithographiés par cette technique de SNOM-SHG. Nous avons pu démontrer la possibilité d’obtenir une résolution de l’ordre de 200 nm, soit une résolution meilleure d’un facteur 2 par rapport à la limite de diffraction.Nous avons ensuite étudié les moyens d’optimiser les performances de ce nouveau type de sondes SNOM-SHG. Une voie consiste à exploiter les propriétés d’antenne optique de pointes métalliques effilées, qui peuvent être le siège d’effets d’exaltation du champ électromagnétique résultant de la singularité géométrique de ces objets (extrémité effilée) ou de l’excitation de résonances plasmons. Afin de pouvoir quantifier ces effets, nous avons entrepris la caractérisation, par luminescence à 2 photons (TPL), de nanofils d’or considérés comme objets de référence pour mimer une pointe. Des fils lithographiés ainsi que des fils issus de chimie colloïdale ont été étudiés de façon à mieux comprendre à la fois l’influence de la forme et de la cristallinité des objets sur les exaltations de champ. Des études simultanées de la géométrie et des propriétés optiques d'un nanofil unique ont été menées au moyen d'un microscope optique inversé associé à une excitation laser et couplé à un microscope à force atomique (AFM) dont la pointe est préalablement réglée pour coïncider avec le spot laser. En balayant l’échantillon, nous pouvons directement confronter l’image topographique de l’objet à la cartographie de points chauds enregistrés à sa surface, le signal de TPL étant directement corrélé à la densité locale d’états électromagnétiques. Nous avons pu montrer que les fils lithographiés et les fils colloïdaux présentaient des facteurs d’exaltation locale de champ différents, la cristallinité des objets pouvant aussi être révélée que via l’analyse spectrale du signal de TPL émis. Enfin, un dernier volet important de mon travail a consisté à faire évoluer le banc expérimental précédemment développé au laboratoire de façon à pouvoir réaliser simultanément des caractérisations de type SNOM-SHG et des caractérisations topographiques. Dans ce but, nous avons travaillé à l’intégration d’une tête AFM diapason sur notre banc de microscopie non-linéaire. Au-delà des aspects électroniques liés à l’optimisation du fonctionnement de ce diapason, le couplage du faisceau laser dans le microscope a également été entièrement reconfiguré. / This work deals with the development of a new kind of scanning near-field optical microscopy (SNOM) based on the realization of so-called active probes taking advantage of the second harmonic generation (SHG) signal coming from a few oriented molecules. The orientation of these molecules is obtained by applying a static electric field in a junction made of a sharp metallic tip placed close to a conductive substrate and immersed in a solution containing dipolar non-linear molecules. A second order nonlinear polarization is obtained from these locally oriented molecules following their excitation with a laser beam finally leading to a nanosource of light intrinsically localized and able to interact with the near-field of the substrate.We have investigated this SNOM-SHG technique to image nano-objects made by e-beam lithography. We were able to demonstrate that a resolution of about 100 nm could be reached, which appears better (of a factor2) than the diffraction limit.We have then been focusing on the way to improve the capabilities of this new type of SNOM-SHG probes. One approach consists in taking advantage of the optical antenna effects that can occur at the end of sharp tips, where the electromagnetic field can be enhanced due to geometrical effects (sharp extremities) or due to the excitation of plasmon resonances. In order to quantify these field enhancements, we have carried out the characterization of gold nanowires using two-photon luminescence (TPL) ; considering these wires as reference objects that can mimic tips. Nanowires made by e-beam lithography and nanowires synthesized by colloidal chemistry have both been studied in order to have a better understanding of the influence of the shape and the crystallinity on the field enhancements. Simultaneous analysis of the geometry and the optical properties of a single nanowire has been carried out using an inverted microscope associated to a laser excitation and coupled to an atomic force microscopy (AFM) which tip is previously aligned with the laser spot. When scanning the sample, we can directly correlate the topographic image of the object to the mapping of the hotspots recorded on its surface, the TPL signal being directly linked to the electromagnetic local density of states. We were able to evidence that both nanowires made by e-beam lithography or synthesized by colloidal chemistry exhibit different field enhancement factors, the crystallinity of the objects being also revealed following the spectral analysis of the emitted TPL signal.Finally, a last important part of my work has dealt with the evolution of the experimental setup previously developed in the laboratory in order to be able to achieve simultaneously SNOM-SHG type and topographic characterizations. We have therefore been working on the integration of an AFM tuning fork head to our nonlinear optical bench. Above the electronic aspects related on the optimization of the tuning fork implementation, the coupling of the laser beam in the microscope has also been reconfigured.

<p>The demand for the faster information transport and better computational abilities is ever increasing. In the last few decades, the electronic industry has met this requirement by increasing the number of transistors per square inch. This lead to the scaling of devices to tens of nm. However, the speed of the electronics is limited to few GHz. Using light, the operating speed of photonic devices can be much larger than GHz. But the photonic devices are diffraction limited and hence the size of photonic device is much larger than the electronic components. Plasmonics is an emerging field with light-induced surface excitations, and can manipulate the light at nanoscale. It can bridge the gap between electronics and photonics. </p> <p>With the present scaling of devices to few nm, the scientific community is looking for alternatives for continued progress. This has opened up several promising routes recently, including two-dimensional materials, quantum computing, topological computing, spintronics and valleytronics. The discovery of graphene has led to the immense interest in the field of two-dimensional materials. Two dimensional-materials have extraordinary properties compared to its bulk. This work discusses the applications of plasmonics in this emerging field of two-dimensional materials and for heat assisted magnetic recording.</p> <p>Black phosphorus is an emerging low-direct bandgap two-dimensional semiconductor, with anisotropic optical and electronic properties. It has high mobility and is promising for photo detection at infrared wavelengths due to its low band gap. We demonstrate two different plasmonic designs to enhance the photo responsivity of black phosphours by localized surface plasmons. We use bowtie antenna and bowtie apertures to increase the absorption and polarization selectivity respectively. Plasmonic structures are designed by numerical electromagnetic simulations, and are fabricated to experimentally demonstrate the enhanced photo responsivity of black phosphorus. </p> <p>Next, we look at another emerging two-dimensional material, bismuth telluride selenide (Bi₂Te₂Se). It is a topological insulator with an insulating bulk but conducting electronic surface states. These surface states are Dirac like, similar to graphene and can lead to exotic plasmonic phenomena. We investigated the optical properties of Bi₂Te₂Se and found that the bulk is plasmonic below 650 nm wavelength. We study the distinct surface plasmons arising from the bulk and surface state of the topological insulator, Bi₂Te₂Se. The propagating surface plasmons at a nanoscale slit in Bi₂Te₂Se are imaged using near-field scanning optical microscopy. The surface state plasmons are studied with a below band gap excitation of 10.6 µm wavelength and the surface plasmons of the bulk are studied with a visible wavelength of 633 nm. The surface state plasmon wavelength is 100 times shorter than the incident wavelength in sharp contrast to the plasmon wavelength of the bulk. </p> <p>Next, we look at the application of plasmonics in heat assisted magnetic recording (HAMR). HAMR is one of the next generation data storage technology that can increase the areal density to beyond 1 Tb/in². Near-field transducer (NFT) is a key component of the HAMR system that locally heats the recording medium by concentrating light below the diffraction limit using surface plasmons. In this work, we use density-based topology optimization for inverse design of NFT for a desired temperature profile in the recording medium. We first perform an inverse thermal calculation to obtain the required volumetric heat generation (electric field) for a desired temperature profile. Then an inverse electromagnetic design of NFT is performed for achieving the desired electric field. NFT designs for both generating a small heated spot size and a heated spot with desired aspect ratio in recording medium are demonstrated. The effect of waveguide, write pole and moving recording medium on the heated spot size is also investigated. </p>

This work presents the first demonstration of a semiconductor based plasmonic near-field superlens, utilizing highly doped GaAs to generate infrared optical images with a spatial resolution beyond the difraction limit. Being easily transferable to other semiconductor materials, the concept described in this thesis can be exploited to realize spectrally adjustable superlenses in a wide spectral range. The idea of superlensing has been introduced theoretically in 2000, followed by numerous publications including experimental studies. The effect initiated great interest in optics, since in contrast to difraction limited conventional optical microscopy it enables subwavelength resolved imaging by reconstructing the evanescent waves emerging from an object. With techniques like scanning near-field optical microscopy (SNOM) and stimulated emission depletion (STED) being already successfully established to overcome the conventional restrictions, the concept of superlensing provides a novel, different route towards high resolution. Superlensing is a resonant phenomenon, relying either on the excitation of surface plasmons in metallic systems or on phonon resonances in dielectric structures. In this respect a superlens based on doped semiconductor benefits from the potential to be controlled in its operational wavelength by shifting the plasma frequency through adjustment of the free carrier concentration. For a proof of principle demonstration, we investigate a superlens consisting of a highly n-doped GaAs layer (n = 4 x 10^18 cm-3) sandwiched between two intrinsic layers. Recording near-field images of subwavelength sized gold stripes through the trilayer structure by means of SNOM in combination with a free-electron laser, we observe both enhanced signal and improved spatial resolution at radiation wavelengths close to l = 22 µm, which is in excellent agreement with simulations based on the Drude-Lorentz model of free electrons. Here, comparative investigations of a purely intrinsic reference sample confirm that the effect is mediated by the charge carriers within the doped layer. Furthermore, slightly differently doped samples provide indications for the expected spectral shift of the resonance. According to our calculations, the wavelength range to be exploited by n-GaAs based superlenses reaches far into the terahertz region, whereas other semiconductor materials are required to explore the near infrared.

Plasmons, i.e. collective oscillations of conduction electrons, have a strong influence on the optical properties of metal micro- and nanostructures and are of great interest for novel photonic devices. Here, plasmons on metal-dielectric interfaces are investigated using near-field optical microscopy and differential angular reflectance spectroscopy. Emphasis is placed on the study of plasmon interaction with individual nanostructures and on the nonlinear process of surface plasmon amplification. Specifically, plasmon transmission across single grooves in thin silver films is investigated with the help of a near-field optical microscope. It is found that plasmon transmittance as a function of groove width shows a non-monotonic behavior, exhibiting certain favorable groove widths with strongly decreased transmittance values. Additionally, evidence of groove-mediated plasmon mode coupling is observed. Spatial beating due to different plasmon wave vectors produces distinct interference features in near-field optical images. A theoretical approach explains these observations and gives estimated coupling effciencies deduced from visibility considerations. Furthermore, stimulated emission of surface plasmons induced by optical pumping using an organic dye solution is demonstrated for the first time. For this a novel twin-attenuated-total-reflection scheme is introduced. The experiment is described by a theoretical model which exhibits very good agreement. Together they provide clear evidence of the claimed process.

Near-field optical microscopy has attracted remarkable attention, as it is the only technique that allows the investigation of local optical properties with a resolution far below the diffraction limit. Especially, the scattering-type near-field optical microscopy allows the nondestructive examination of surfaces without restrictions to the applicable wavelengths. However, its usability is limited by the availability of appropriate light sources. In the context of this work, this limit was overcome by the development of a scattering-type near-field microscope that uses a widely tunable free-electron laser as primary light source. In the theoretical part, it is shown that an optical near-field contrast can be expected when materials with different dielectric functions are combined. It is derived that these differences yield different scattering cross-sections for the coupled system of the probe and the sample. Those cross-sections define the strength of the near-field signal that can be measured for different materials. Hence, an optical contrast can be expected, when different scattering cross-sections are probed. This principle also applies to vertically stacked or even buried materials, as shown in this thesis experimentally for two sample systems. In the first example, the different dielectric functions were obtained by locally changing the carrier concentration in silicon by the implantation of boron. It is shown that the concentration of free charge-carriers can be deduced from the near-field contrast between implanted and pure silicon. For this purpose, two different experimental approaches were used, a non-interferometric one by using variable wavelengths and an interferometric one with a fixed wavelength. As those techniques yield complementary information, they can be used to quantitatively determine the effective carrier concentration. Both approaches yield consistent results for the carrier concentration, which excellently agrees with predictions from literature. While the structures of the first system were in the micrometer regime, the capability to probe buried nanostructures is demonstrated at a sample of indium arsenide quantum dots. Those dots are covered by a thick layer of gallium arsenide. For the first time ever, it is shown experimentally that transitions between electron states in single quantum dots can be investigated by near-field microscopy. By monitoring the near-field response of these quantum dots while scanning the wavelength of the incident light beam, it was possible to obtain characteristic near-field signatures of single dots. Near-field contrasts up to 30 % could be measured for resonant excitation of electrons in the conduction band of the indium arsenide dots. / Die optische Nahfeldmikroskopie hat viel Beachtung auf sich gezogen, da sie die einzige Technologie ist, welche die Untersuchung lokaler optischer Eigenschaften mit Auflösungen unterhalb der Beugungsgrenze ermöglicht. Speziell die streuende Nahfeldmikroskopie erlaubt die zerstörungsfreie Untersuchung von Oberflächen ohne Einschränkung der verwendbaren Wellenlängen. Die Nutzung ist jedoch durch das Vorhandensein entsprechender Lichtquellen beschränkt. Im Rahmen dieser Arbeit wurde diese Beschränkung durch Entwicklung eines streuenden Nahfeldmikroskops überwunden, das einen weit stimmbaren Freie-Elektronen-Laser als primäre Lichtquelle benutzt. Im theoretischen Teil wird gezeigt, dass ein optischer Kontrast erwartet werden kann, wenn Materialien mit unterschiedlichen Dielektrizitätskonstanten kombiniert werden. Es wird hergeleitet, dass diese Unterschiede in unterschiedlichen Streuquerschnitten für das gekoppelte System aus Messkopf und Probe resultieren. Diese Streuquerschnitte definieren die Stärke des Nahfeldsignals, welches auf unterschiedlichen Materialien gemessen werden kann. Ein optischer Kontrast kann also erwartet werden, wenn unterschiedliche Streuquerschnitte untersucht werden. Dass dieses Prinzip auch auf übereinander geschichtete oder sogar verborgene Strukturen angewendet werden kann, wird in dieser Doktorarbeit an zwei Probensystemen experimentell gezeigt. Im ersten Beispiel wurden die unterschiedlichen Dielektrizitätskonstanten durch örtliches Ändern der Ladungsträgerdichte in Silizium durch Bor-Implantation erreicht. Es wird gezeigt, dass die Dichte der freien Ladungsträger an Hand des optischen Kontrastes zwischen implantiertem und reinem Silizium ermittelt werden kann. Zu diesem Zweck wurden zwei unterschiedliche Ansätze verwendet, ein nicht-interferometrischer mittels variabler Wellenlängen und ein interferometrischer mit einer konstanten Wellenlänge. Weil diese Techniken gegensätzliche Informationen liefern, können sie genutzt werden, um die effektive Ladungsträgerdichte quantitativ zu bestimmen. Beide Ansätze lieferten konsistente Resultate für die Trägerdichte, welche sehr gut mit den Vorhersagen der Literatur übereinstimmt. Während die Strukturen im ersten Beispiel im Mikrometer-Bereich lagen, wird die Möglichkeit, verborgene Nanostrukturen zu untersuchen, an Hand einer Probe mit Indiumarsenid Quantenpunkten demonstriert. Diese sind von einer dicken Schicht Galliumarsenid bedeckt. Zum ersten Mal wird experimentell gezeigt, dass Übergänge zwischen Elektronenzuständen in einzelnen Quantenpunkten mit Nahfeldmikroskopie untersucht werden können. Durch die Messung der Nahfeld-Antwort der Quantenpunkte unter Änderung der Wellenlänge des eingestrahlten Lichtes war es möglich, charakteristische Nahfeld-Signaturen der einzelnen Quantenpunkte zu erhalten. Nahfeld-Kontraste bis zu 30 Prozent konnten für die resonante Anregung der Elektronen im Leitungsband der Indiumarsenid Punkte beobachtet werden.

This thesis examines and exploits the optical properties of pairs of MNPs. Pairs of MNPs offer two further parameters not existent at single MNPs, which both affect the local optical fields in their vicinity: the distance between them, and their relative orientation with respect to the polarisation of the excitation light. These properties are subject of three chapters: One section examines the distance-dependent and orientation-sensitive scattering cross section (SCS) of two equally sized MNPs. Both near- and far-field interactions affect the spectral position and spectral width of the SCS. Far-field coupling affects the SCS even in such a way that a two-particle system may show both a blue- and redshifted SCS, depending only on the distance between the two MNPs. The maximum distance for this effect is the coherence length of the illumination source – a fact of importance for SCS-based experiments using laser sources. Another part of this thesis examines the near-field between two MNPs and the dependence of the locally enhanced field on the relative particle orientation with respect to the polarisation of the excitation light. To attain a figure of merit, the intensity of fluorescence light from dye molecules in the surrounding medium was measured at various directions of polarisation. The field enhancement was turned into fluorescence enhancement, even providing a means for sensing the presence of very small MNPs of 12 nm in diameter. In order to quantify the near-field experimentally, a different technique is devised in a third section of this thesis – scanning particle-enhanced Raman microscopy (SPRM). This device comprises a scanning probe carrying an MNP which in turn is coated with a molecule of known Raman signature. By manoeuvring this outfit MNP into the vicinity of an illuminated second MNP and by measuring the Raman signal intensity, a spatial mapping of the field enhancement was possible. / Diese Dissertation untersucht und nutzt die optischen Eigenschaften von Paaren von Metall-Nanopartikeln (MNP). MNP-Paare bieten gegenüber einzelnen MNP zwei weitere Parameter, welche beide auf das optische Nahfeld der zwei MNPs wirken: zum Einen der Abstand der zwei MNPs zueinander, zum Anderen die relative Ausrichtung des Paares bezüglich der Polarisation des anregenden Lichts. Diese Eigenschaften sind Thema der Arbeit: Ein Abschnitt untersucht den abstands- und orientierungsabhängigen Streuquerschnitt (SQS) zweier gleichgroßer MNPs. Die spektrale Position und die Breite des SQS wird von Wechselwirkungen sowohl im Nah- als auch im Fernfeld beeinflusst. Der Einfluß der Fernfeld-Wechselwirkung geht so weit, daß ein Zwei-MNP-System sowohl einen blau- als auch einen rotverschobenen SQS haben kann – dies hängt lediglich vom Abstand der zwei MNPs ab. Die Reichweite dieser Fernfeld-Wechselwirkung wird durch die Kohärenzlänge der Beleuchtungsquelle bestimmt – eine wichtige Tatsache für SQS-Untersuchungen, welche Laserquellen verwenden. Ein weiterer Teil der Dissertation untersucht das Nahfeld zwischen zwei MNPs. Insbesondere wird dargestellt, inwieweit die Überhöhung des Nahfelds von der Orientierung des Partikelpaares bezüglich der Polarisation des Anregungslichts abhängt. Um den Effekt quantifizieren zu können, wurde die Intensität der Fluoreszenz des umgebenden Mediums für verschiedene Polarisationsrichtungen gemessen. Die lokale Feldverstärkung konnte in eine Fluoreszenzverstärkung gewandelt werden, mit deren Hilfe sich sogar die Anwesenheit sehr kleiner MNPs von nur 12 nm Durchmesser nachweisen ließ. Wie Nahfeld-Intensitäten experimentell quantifiziert werden können, stellt ein dritter Abschnitt dieser Dissertation vor – per MNP-verstärkter Raman-Rastersonden-Mikroskopie. Diese Technik besteht aus einer Rastersonde, welcher ein MNP anheftet, welches wiederum mit einem Molekül bekannter Ramansignatur überzogen ist. Indem solch eine Sonde in die unmittelbare Nähe eines zweiten, beleuchteten MNPs gebracht wurde und dabei die Intensität des Raman-Signals aufgezeichnet wurde, ließ sich die räumliche Verteilung der Ramanverstärkung vermessen.

Most major cell phone manufacturers have been releasing cell phones equipped with Near Field Communication (NFC). At the same time there is also increasing use of mobile payments and user verification with the use of the NFC technology. These trends indicate both the increasing popularity and great potential for increased use of NFC in today’s society. As a result NFC has a huge potential to simplify our everyday tasks, ranging from paying for items to accessing our office or home. In this context we will focus on using NFC together with a Power over Ethernet (PoE) powered circuit board and NFC reader to realize a simple system for granting access to open a locked door. One of the purposes of this realization is to explore what services can be realized when such a system is connected to the home/building network and connected to the Internet. A second purpose is to learn how to use network attached devices, as the concept of the Internet of Things is considered by many to be a driving force in the next generation Internet. This project uses very in expensive and low power hardware, as the number of devices is potentially very large and thus in order to minimize the technology’s impact on the environment we must consider how to minimize the power used – while maintaining the desired user functionality. This bachelor’s thesis project made it possible for a PoE powered circuit board containing a MSP430 microcontroller to work along with a NFC reader, which was connected through the Serial Peripheral Interface (SPI). We hope that the end result of this project will lead to a simpler life by exploiting this increasingly ubiquitous technology. For example, a homeowner could send a one-time key to a repair person who is coming to fix their sink. Similarly a homeowner could send a key to their neighbor which is valid for two weeks so that their neighbor could come into their home to water the plants while they are away on vacation. Another example is lending your apartment key to a friend while you are out of town. / Det blir allt vanligare med närfältskommunikation (NFC) i dagens samhälle, mobiltelefons-tillverkarna börjar utveckla nya telefoner med NFC teknik inbyggd, samtidigt som användningen av NFC ökat. Det sker även en utveckling inom mobila betalningar och användar-verifiering med användning av NFC, då NFC förenklar detta. Med detta sagt kommer vi att arbeta med detta i detta kandidatexamens-arbete där vi fokuserar på NFC samt Power over Ethernet som använder MSP430 chippet som kärna. Med dessa enheter kombinerade kommer en enkel rörelse med ett NFC kort över en NFC läsare som sedan skall ge åtkomst till en låst dörr. Detta i större kombination med en Internetuppkoppling kunna ge ägaren möjligheten att kunna skicka ut dörrnycklar till andra användare. I detta kandidatexamensarbete gjorde vi det möjligt för ett PoE kretskort bestående av ett MPS430 mikroprocessor att samarbeta med en NFC läsare genom SPI protokollet. Genom att utveckla detta projekt hoppas vi att vårt slutresultat leder till en enklare delning av nycklar med hjälp av denna teknologi.