A versatilidade das espumas poliuretanas permite sua aplicação em inúmeros setores industriais, devido à possibilidade de se obter diferentes conjuntos de propriedades apenas alterando sua formulação básica. Um tipo recorrente de alteração é a incorporação de diferentes tipos de fibras em matrizes de poliuretano, vastamente estudada com o objetivo de gerar materiais compósitos com melhores propriedades mecânicas do que a matriz original. Inúmeros autores reportaram a utilização de celulose cristalina como uma alternativa renovável aos agentes de reforço e revelaram que a celulose utilizada como aditivo em matrizes poliméricas afetou as propriedades mecânicas da matriz original e, em menor escala, exerceu influência sobre a estabilidade térmica do compósito. O presente trabalho dedicou-se a isolar a celulose cristalina contida nas fibras de bananeira mediante tratamento com ácido acético concentrado. Os tratamentos químicos são necessários para modificar a superfície do material e melhorar a adesão do agente de reforço à matriz. Tendo em vista os resultados associados à estabilidade térmica dos compósitos de poliuretano reforçados com celulose, buscou-se sintetizar materiais híbridos de celulose e MgO.nH2O. Foi observado que, mesmo em pequenas quantidades, a presença do óxido hidratado de magnésio afetou significativamente a estabilidade térmica do HB 98:2. Estudos térmicos indicam que os materiais compósitos estudados apresentaram comportamento semelhante ao da matriz PU. Estudos das propriedades compressivas dos materiais poliméricos gerados mostraram que a incorporação do HB 98:2 ao PU afetou positivamente as propriedades mecânicas do material, sendo que o compósito PU + 1 HB 98:2 apresentou desempenho mecânico superior ao da matriz pura. / The versatility of polyurethanes foams allows its application in numerous industries because of the possibility of obtaining different sets of properties just by changing its basic formulation. A recurrent type of modification is the incorporation of different types of fibers in polyurethane matrices widely studied with the objective of generating composite materials with better mechanical properties than the original matrix. Numerous authors have reported the use of crystalline cellulose as a renewable alternative to fillers and showed that the cellulose used as additive in polymer matrices affect the mechanical properties of the original matrix and, to a lesser extent, influence upon thermal stability of the composite. This work was dedicated to isolate the crystalline cellulose contained in banana fibers by treatment with concentrated acetic acid. The chemical treatments are needed to modify the surface of the material and improve adhesion of the filler to the matrix. In view of the results associated with the thermal stability of the composite polyurethane reinforced with cellulose, sought to synthesize hybrid materials cellulose and MgO.nH2O. It has been observed that even in small quantities, the presence of hydrated magnesium oxide significantly affect the thermal stability of HB 98: 2. thermal studies indicate that the studied composites showed similar behavior to the PU matrix. Studies of the compressive properties of polymeric materials generated showed that the incorporation of HB 98: 2 to PU positively affect the mechanical properties of the material, and the composite PU + HB 98 1: 2 had mechanical performance superior to that of pure matrix.

No estudo de sistemas híbridos orgânico-inorgânico, o uso de materiais como polímeros conjugados e óxidos de metal de transição tem despertado grande interes- se. Em particular, destacam-se sistemas compostos de tiofenos e óxido de titânio, que encontram uma importante aplicação em células solares. Para um melhor entendimento da interação entre os dois sistemas, torna-se necessário conhecer a organização do polímero sobre o substrato inorgânico. Desse modo, investigamos neste trabalho a formação da interface entre oligômeros de tiofeno e a superfície (101) de TiO2-anatase utilizando um enfoque de multiformalismo, que inclui simulações de dinâmica molecular clássica, e uma combinação de cálculos de primeiros princípios segundo Hartree-Fock e Teoria do Funcional da Densidade (DFT) para a determinação de propriedades estruturais e eletrônicas. A deposição de oligômeros de tiofeno sobre TiO2, constituindo sistemas de milhares de átomos, foi simulada por meio de dinâmica molecular clássica. Como requisito do cálculo clássico para estes sistemas, realizamos a reparametrização do campo de forças Universal tanto para os oligômeros, cujas estruturas não são bem descritas pelos campos de força padrões, como para o cristal e a superfície de TiO2. Foi observada a formação de filmes desordenados e densos de quatertiofeno, com a presença de uma maioria de moléculas de orientação quase perpendicular em relação ao plano superficial. Na camada de interface também se encontram moléculas dispostas paralelamente ao substrato, aumentando o contato entre os sistemas orgânico e inorgânico. A deposição de oligômeros isolados de quatertiofeno e de hexatiofeno mostra ainda que as moléculas se dispõem paralelas na superfície, alinhadas segundo direções de periodicidade dos átomos da superfície. Estudamos desta forma as propriedades eletrônicas de um sistema composto de politiofeno sobre TiO2, com o polímero paralelo na superfície e disposto na direção preferencial, através de um formalismo ab initio DFT. Apesar do tratamento DFT apresentar problemas conhecidos quanto na definição do gap, o que é mais relevante ainda no nosso caso de sistemas híbridos, os resultados revelam um deslocamento do topo da banda de valência do material orgânico em relação ao inorgânico. Isto possibilita o aprisionamento de um buraco no polímero, condição necessária para o uso deste tipo de sistema em células fotovoltaicas. Verifica-se ainda o acoplamento entre átomos de enxofre do politiofeno e de oxigênio do TiO2 através da presença de um estado associado a uma densidade eletrônica que se estende do polímero na superfície. Nossos resultados indicam assim um bom acoplamento eletrônico da superfície (101) de TiO2-anatase com politiofenos. / In the study of organic-inorganic hybrid systems, the use of materials such as conjugated polymers and transition metal oxides has attracted great interest. In particular, it is worth mentioning systems composed by thiophenes and titanium oxide, which have an important application in solar cells. For a better understand- ing of the interaction between these systems, it is necessary to know the polymer organization over the inorganic substrate. Therefore, we investigated in this work the formation of the interface between thiophene oligomers and the (101) surface of TiO2-anatase by means of a multi-formalism approach, which includes classical molecular dynamics simulations, and a combination of ¯rst principles calculations based on Hartree-Fock and Density Functional Theory (DFT) for structural and electronic properties. The simulation of deposition of thiophene oligomers on TiO2, which demands systems with thousands of atoms, was performed by classical molecular dynamics. As a prerequisite for the classical calculation for these systems, we performed a re-parameterization of the Universal force ¯eld for the oligomers, whose structures are not well described by standard force ¯elds, and for the TiO2 bulk and surface. We observed the formation of disordered and dense quaterthiophene ¯lms, with presence of a majority of molecules oriented almost perpendicularly to the surface plane. In the ¯rst interfacial layer we ¯nd also molecules oriented parallel to the sub- strate, which increases the contact between the organic and the inorganic systems. The deposition of isolated quaterthiophene and sexithiophene oligomers resulted in molecules disposed parallel to the surface and aligned along directions of periodicity of the surface atoms. We therefore studied the electronic properties of a system composed of poly- thiophene on TiO2, with the polymer parallel to the surface and oriented along a preferential direction, by means of DFT formalism. Although DFT treatments present known problems in the de¯nition of the energy gap, even of more relevance in our case of hybrid systems, the results for the occupied states revealed a sizeable displacement of the top of the valence band of one system with respect to the other. The misalignment will prevent the passage of a hole from the polymer to the oxide, providing in this way the necessary condition for the use of this type of system in solar cells. It was also seen electronic coupling between sulfur atoms from polythio- phene, and oxygen atoms from TiO2 through the presence of a state associated with an electronic density extended from the polymer to the surface. Our results thus indicate there is good electronic coupling between the (101) surface of TiO2-anatase and polythiophenes.

The germylenes, germanium(II) 2-(oxidomethyl)phenolate (1), germanium(II) 4-methyl-2-(oxidomethyl)phenolate (2) and germanium(II) 4-bromo-2-(oxidomethyl)phenolate (3) were synthesized and their thermally induced twin polymerization to give organic–inorganic hybrid materials was studied. The compounds 1–3 form oligomers including dimers, trimers and tetramers as a result of intermolecular coordination of the benzylic oxygen atom to germanium. The structural motifs were studied by single crystal X-ray diffraction analysis and DFT-D calculations. Thermally induced twin polymerization of these germylenes gave hybrid materials based on germanium-containing phenolic resins. Carbonization of these resins under reductive conditions resulted in porous materials that are composed of germanium and carbon (Ge@C materials), while oxidation with air provided non-porous germanium dioxide. The porous Ge@C materials were tested as potential anode materials for rechargeable Li-ion batteries. Reversible capacities of 540 mA h g−1 were obtained at a current density of 346 mA g−1 without apparent fading for 100 cycles, which demonstrates that germanium is well accessible in the hybrid material. / Dieser Beitrag ist aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

Amino-functionalized organic–inorganic hybrid materials with a narrow distributed nanostructure of 2–4 nm in size were obtained by means of a template-free and non-aqueous procedure. Simultaneous twin polymerization of novel amino group containing twin monomers with 2,2′-spirobi[4H-1,3,2-benzodioxasiline] has been applied for this purpose. The amino groups of the organic–inorganic hybrid material are useful for post derivatization. / Dieser Beitrag ist aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

Four molecular germanates based on salicyl alcoholates, bis(dimethylammonium) tris[2-(oxidomethyl)phenolate(2-)]germanate (1), bis(dimethylammonium) tris[4-methyl-2-(oxidomethyl)phenolate(2-)]germanate (2), bis(dimethylammonium) tris[4-bromo-2-(oxidomethyl)phenolate(2-)]germanate (3) and dimethylammonium bis[2-tert-butyl-4-methyl-6-(oxidomethyl)phenolate(2-)][2-tert-butyl-4-methyl-6-(hydroxymethyl)phenolate(1-)]germanate (4), were synthesized and characterized including single crystal X-ray diffraction analysis. In the solid state, compounds 1 and 2 exhibit one-dimensional hydrogen bonded networks, whereas compound 4 forms separate ion pairs, which are connected by hydrogen bonds between the dimethylammonium and the germanate moieties. The potential of these compounds for thermally induced twin polymerization (TP) was studied. Germanate 1 was converted by TP to give a hybrid material (HM-1) composed of phenolic resin and germanium dioxide. Subsequent reduction with hydrogen provided a microporous composite containing crystalline germanium and carbon (Ge@C – C-1, germanium content ∼20%). Studies on C-1 as an anode material for Li-ion batteries revealed reversible capacities of ∼370 mA h gGe@C−1 at a current density up to 1384 mA g−1 without apparent fading for 500 cycles. / Dieser Beitrag ist aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

The acid and base catalyzed simultaneous twin polymerization (STP) of various 2,2′-disubstituted 4H-1,3,2-benzodioxasiline derivatives 2a–d with 2,2′-spirobi[4H-1,3,2-benzodioxasiline] (1) are presented in this paper. The products are nanostructured ternary organic–inorganic hybrid materials consisting of a cross-linked organic polymer, silica and a disubstituted polysiloxane. It can be demonstrated whether and in which extent the copolymerization of the two inorganic fragments of 1 and 2 takes place among the STP and how the molar ratio of the two components determines the structure formation of the resulting hybrid material. Steric and electronic effects of the substituents at the silicon center of 2 on the molecular structure formation and the morphology of the resulting hybrid material were investigated by means of solid state CP MAS 29Si and 13C NMR spectroscopy as well as high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM). The mechanical properties (hardness and Young's modulus) of the hybrid materials were analyzed by means of nanoindentation measurements. / Dieser Beitrag ist aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

Les ligands carbéniques N-hétérocycliques sont généralement décrits comme des analogues aux ligands phosphines car ils présentent des propriétés électroniques comparables, bien que leur caractère σ-donneur soit plus prononcé. Ils ont donc été utilisés pour la synthèse de complexes organométalliques en remplacement des ligands phosphines et un nombre très important de complexes métal-NHC ont été développés ces 15 dernières années. Toutefois, ces complexes bien que très actifs dans de nombreuses réactions catalytiques clefs (métathèse des oléfines, couplages C-C, échange H/D…), présentent des problèmes de désactivation rapide et sont difficilement séparables des produits de réaction. L'hétérogénéisation de tels complexes pourrait remédier à ces inconvénients, et c'est la raison pour laquelle ce domaine a attiré beaucoup d'attention ces dix dernières années. La stratégie la plus courante pour l’immobilisation de tels complexes sur supports oxydes consiste à faire réagir des précurseurs de type organosilane avec des solides présentant des groupements hydroxyles de surface. Bien que cette méthode offre un moyen simple et efficace de fonctionnaliser des supports solides avec un éventail très large de fonctionnalités organiques, il ne permet cependant pas un contrôle de leur distribution et de la nature des espèces de surface dans le matériau final. La méthodologie alternative au greffage sur supports oxydes développée dans ce travail de thèse a consisté donc à générer des matériaux hybrides organiques-inorganiques mésostructurés, contenant des unités NHC dans leurs pores ou dans leurs murs. Ces matériaux sont obtenus par sol-gel hydrolytique en milieu structurant via des réactions de co-hydrolyse et de co-polycondensation d’un précurseur de type organotrialcoxysilane et de tétraalcoxysilane (TEOS). Cette voie de synthèse a été utilisée car elle permet de contrôler : la distribution des groupements organiques au sein de la matrice silicique, la nature des espèces siliciques de surface, et la concentration en fonctions organiques. Après synthèse des matériaux hybrides, des réactions in-situ ont permis l’obtention de matériaux contenant des unités uniques de type Au-NHC régulièrement distribuées au sein du support d’oxyde. Les matériaux ainsi obtenus ont été caractérisés à chacune des étapes menant au solide final par de nombreuses techniques : adsorption-désorption d’azote à 77 k, microscopie électronique à transmission, diffraction des rayons X aux petits angles, spectroscopie RMN multinoyaux à l'état solide et analyses élémentaires. Après avoir testé et comparé les performances catalytiques de ces matériaux avec celles de leurs homologues en phase homogène et ce, dans plusieurs réactions catalytiques (oxydation sélective des alcools, couplage croisé de Suzuki et diboration des oléfines), nous nous sommes focalisés sur la réaction d’addition d’alcools sur les alcynes et plus particulièrement sur l’addition du méthanol sur le 3-hexyne. C'est d’ailleurs, à notre connaissance, le premier exemple en littérature de l'usage des complexes carbéniques N-hétérocycliques d’or dans cette réaction. / N-heterocyclic carbene ligands have been described as interesting alternatives to tertiary phosphines in term of bonding and reactivity and have been therefore extensively studied as metallocarbene promotors. As a result, a large variety of homogeneous metal-NHC complexes have been developed and their impressive catalytic properties have been studied. However, such highly active homogeneous catalysts suffer from fast deactivation and separation problems from the reaction products. The immobilization of such complexes could overcome these drawbacks and that is the reason why this area has attracted much attention in the last ten years. The most common strategy for complexes immobilisation involves covalent grafting oforganosilane precursors onto solid support surfaces, via reaction with surface OH groups. Although this method provides a convenient way for introducing all kinds of organic moieties into solids, it does not permit the control of either their distribution in the final material or the nature of the surface species. The alternative methodology, to classical grafting, developed in this PhD project, is based on the design of organic-inorganic hybrid mesostructured materials containing NHC units along their pore channels or into their walls and the subsequent coordination on the NHC units with the Au organometallic precursor. These materials were prepared by sol-gel process using a templating route, via co-hydrolysis and co-polycondensation of an organotrialkoxysilane precursor and tetraethoxysilane. This strategy permits a control of: the ligands distribution into the silica matrix, the nature of the silica surface species and the organic moieties concentration. All the solids, from the starting hybrid material to the Au-NHC containing one, were fully characterized using various techniques: nitrogen adsorption-desorption at 77 K, transmission electron microscopy, small angle X-Ray diffraction, solid state NMR spectroscopy and elementary analysis. After screening the catalytic performances of these Au-NHC containing materials in several catalytic reactions (selective oxidation of alcohols, Suzuki cross-coupling and olefins diboration), their high catalytic activity in alcohols addition to alkynes reactions prompted us to study more deeply their catalytic behaviour (and that of their homogeneous homologues) in the reaction of methanol addition to 3-hexyne. To the best of our knowledge, it is the first use in catalysis of gold Nheterocyclic carbene complexes in this reaction.

<div> <div> <div> <p>Organic-inorganic halide perovskite solar cells have increased efficiencies substantially (from 3% to > 22%), within a few years. However, these solar cells degrade very rapidly due to humidity and no longer are capable of converting photons into electrons. Methylammonium Lead Triiodide (CH3NH3PbI3 or MAPbI3) is the most common type of halide perovskite solar cell and is the crystal studied in this thesis. Graphene is an effective encapsulation method of MAPbI3 perovskite to reduce degradation, while also being advantageous because of its excellent optical and conductive properties. Using a PMMA transfer method graphene was chemical vapor depostion (CVD) grown graphene was transferred onto MAPbI3 and reduced the MAPbI3 degradation rate by over 400%. The PMMA transfer method in this study is scalable for roll-to- roll manufacturing with fewer cracks, impurites, and folds improving upon dry transfer methods. To characterize degradation a fluorescent microscope was used to capture photoluminescence data at initial creation of the samples up to 528 hours of 80% humidity exposure. Atomic force microscopy was used to characterize topographical changes during degradation. The study proves that CVD graphene is an effective encapsulation method for reducing degradation of MAPbI3 due to humidity and retained 95.3% of its initial PL intensity after 384 hours of 80% humidity exposure. Furthermore, after 216 hours of 80% humidity exposure CVD graphene encapsulated MAPbI3 retained 80.2% of its initial number of peaks, and only saw a 35.1% increase in surface height. Comparatively, pristine MAPbI3 only retained 16% of its initial number of peaks and saw a 159% increase in surface height. </p> </div> </div> </div>

Cette thèse s'inscrit dans un contexte de recherche d'amélioration des propriétés d'extraction d'ions sur phase solide. Au travers de ces travaux est développée une méthodologie innovante visant à adapter la structuration, la morphologie ainsi que les fonctions d'extraction aux ions et aux milieux cibles. Pour cela, nous avons opté pour une méthode « tout-en-un » passant par l'utilisation d'organosilanes amphiphiles. Composées d'une tête condensable et d'une tête « extractante » aux extrémités d'une chaîne hydrophobe, ces molécules polyvalentes font office à la fois d'agent matriciel silicique, d'agent structurant et d'agent extractant. Par analogie avec un tensioactif, nous avons montré que l'auto-assemblage de telles molécules est gouverné par des paramètres liés notamment à la taille de la partie hydrophile de la molécule. En utilisant différents agents de courbure, il est possible de jouer sur la taille du couple agent de courbure/fonction extractante. La courbure à l'interface entre le milieu et l'agrégat est donc ajustable, ce qui conduit à différents types d'agrégation. Par cette méthode, des bicouches, des vésicules et des micelles directes cylindriques ont été obtenues. A l'inverse, l'ajout de précurseur de silice (TEOS) dans la préparation peut conduire au gonflement des structures et à l'inversion de l'agrégation vers des micelles inverses cylindriques. L'effet du solvant a également été étudié et a permis d'aboutir à des morphologies très diverses. Enfin, l'accessibilité des fonctions et les propriétés d'extraction des matériaux élaborés ont été évaluées au travers de modifications chimiques de la tête extractante et de tests d'extraction d'ions métalliques (Terres rares, platinoïdes …). / The aim of this study is to develop a suitable “all-in-one” approach involving amphiphilic organosilane precursors in order to prepare hybrid materials for solid phase extraction processes. Such molecules combine both condensable and functional parts around a long hydrophobic alkyl chain.Similarly to a surfactant, the amphiphilic behavior of the organosilane molecules is governed by the size of the hydrophilic extractant function. By playing with the curvature agent size, it is possible to adjust the size of the couple extractant part/curvature agent at the interface between the aggregates and the surrounding media. Therefore, the aggregation shape is tunable. This approach constitutes an efficient and original method in order to tune the nanostructure of highly functionalized silica at the early stage of the elaboration. Hybrid organic-inorganic planar objects and vesicles are obtained for smaller curvature agents. Increasing the size of the curvature agent results in a transition of the aggregation geometry from vesicles to cylindrical direct micelles, leading to highly functionalized nanofibers.Comparatively, the addition of a silica precursor as TEOS in the preparation results in the swelling of the condensable part of the amphiphilic organosilane molecules. Thereby, as a curvature agent, the addition of TEOS allows tuning the aggregation towards reverse cylindrical micelles. Solvent effects have also been evaluated, appearing as a critical morphological parameter. Macroporous materials, blackberry-like particles and elongated or spherical nanoparticles can be obtained depending on the solvent.Finally, the accessibility of the functions and the extraction properties of the materials have been studied through chemical modifications and metallic ion extraction experiments (Rare earth elements, platinoids …).

Die vorliegende Arbeit fokussiert auf die Synthese von organisch/anorganischen Hybridmaterialien mit multifunktionalen Eigenschaften unter ausschliesslicher Darstellung dieser Materialen mit Hilfe des „wet chemistry“ Zugangs. Ausgehend von der Darstellung und Charakterisierung von isomorphen bzw. isostrukturellen Hybridmaterialien der allgemeinen Zusammensetzung catena-{[Me3NH][MCl3·2H2O]}n (Mtac) (MII = Mn, Co, Ni, Cu, tac = [Me3NH]Cl3·2H2O]) speziell mittels IR und UV/vis Spektroskopie ist beschrieben, wie sich aus diesen entsprechende bi-, tri-, und auch tetra-heterometallische Koordinationspolymere der allgemeinen Zusammenseztung {MxM´ytac}n, {MxM´yM´´ztac}n, {MxM´yM´´zM´´´ttac}n (MII = M ≠ M´≠ M´´≠ M´´´≠ M´´´´ und x, y, z, t als prozentualer Metallgehalt) herstellen lassen und welche limitierende Faktoren zu berücksichtigen sind. Leifähigkeitsmessungen an Einkristallen ausgewählter Koordinationspolymere werden vorgestellt. Zusätzlich werden die durch Rekristallisation von Nitac erhaltenen zwei verschiedenen Koordinationspolymere der Formel {[Me3NH]3{NiCl4}{NiCl3}}n und {[(Me3NH]{NiCl3}}n in Bezug auf ihre ungewöhnlichen strukturellen und magnetischen Eigenschaften vorgestellt und beschrieben. Die durch Austausch von [Me3NH]+ Kationen gegen [Et3NH]+ bzw. protonierten aromatischen N-haltigen Kationen wie [2,2’-bipyH2]2+, [4,4’-bipyH2]2+ and [1,10-phenH2]2+ erhaltenen Reaktionsprodukte aus Umsetzungen mit Hilfe des “wet chemistry” Zugangs werden im Hinblick auf ihre Festkörperstrukturen beschrieben. Die erfolgreiche Darstellung einer neuen Familie von perylentetracarboxylato-basierenden Komplexen, die teilweise hervorragende Löslichkeiten besitzen, wird beschrieben sowie die strukturellen, magnetischen und lumineszierenden Eigenschaften ausgewählter Vetreter. / The thesis presented here is focused on the synthesis of organic/ inorganic hybrid materials with multifunctional properties by means of the “wet chemistry” approach. The synthesis and characterization of hybrid materials with the general composition catena-{[Me3NH][MCl3·2H2O]}n (Mtac) (MII = Mn, Co, Ni, Cu, tac = [Me3NH]Cl3·2H2O]) is described. Due to their isomorphic and/ or isostructural character, bi-, tri-, and even tetra-heterometallic chains of the general formula {MxM´ytac}n, {MxM´yM´´ztac}n, {MxM´yM´´zM´´´ttac}n (MII = M ≠ M´≠ M´´≠ M´´´≠ M´´´´ and x, y, z, t is the percentage of each metal content) were synthesized and characterized. Limitating factors of the synthesis of these types of heterometallic coordination polymers are discussed. Furthermore, the conductive properties of selected representatives were investigated. Additionally, the products obtained from recrystallization of Nitac, two different novel 1D coordination polymers of the formula {[Me3NH]3{NiCl4}{NiCl3}}n and {[(Me3NH]{NiCl3}}n are described with respect to their structural and magnetic properties. Efforts to replace the [Me3NH]+ cations of Mtac compounds by [Et3NH]+ cations as well as by protonated aromatic amines as [2,2’-bipyH2]2+, [4,4’-bipyH2]2+ and [1,10-phenH2]2+ are reported next with respect to the structural exploration of obtained hybrid materials by the “wet chemistry” approach. Finally, the synthesis of a new family of perylene tetracarboxylate (ptc) based soluble complexes is reported. Structural, magnetic and luminescence properties of selected representatives of this new series of soluble ptc derivatives are reported.