Neste trabalho estudamos a dinâmica molecular e o empacotamento em semicondutores orgânicos com diferentes tamanhos de cadeias conjugada usando uma estratégia de multi-técnicas, em particular Ressonância Magnética Nuclear (RMN), espalhamento de Raios-X de alto ângulo (WAXS), Calorimetria Exploratória Diferencial (DSC), espectroscopia Raman e espectroscopias Ópticas de absorção UV-Vis e fluorescência. Nestes estudos utilizamos oligômeros de fluorenos, com 3, 5 e 7 unidades repetitivas e copolímeros multibloco conjugados/não-conjugados com as unidades conjugadas constituídas por unidades de fenileno de vinileno (PV) e as não-conjugadas formadas por unidades metilênicas. No estudo com oligômeros, foi mostrado que a capacidade e a forma de ordenamento das cadeias dependem do número de unidades repetitivas, com o Pentâmero possuindo uma tendência muito maior de cristalização. Essa conclusão foi suportada por cálculos teóricos ab-initio, que mostraram que a conformação de menor energia do pentâmero favorece as interações intercadeias e, portanto, o ordenamento de longo alcance. Os resultados referentes aos estudos de dinâmica molecular corroboraram essas características e mostraram que a ativação dos movimentos moleculares nas fases amorfas dos oligômeros são predominantemente dependentes dos comprimentos das cadeias oligoméricas, em concordância com o comportamento encontrado para as suas Tg´s. No estudo referente aos copolímeros multiblocos, foi encontrado que a presença dos grupos espaçadores alifáticos inibem a forte tendência de cristalização das unidades de PV, porém não impedem a agregação dessas unidades. Foi verificado que, a dispersão de tamanhos das unidades agregadas afeta fortemente as características de emissão dos copolímeros, onde a emissão nas cadeias maiores é privilegiada. No que diz respeito a dinâmica molecular, foi observado que a presença de movimentos na região alifática contribui para o aparecimento de processos de relaxação não radiativos o qual inibem a emissão dos copolímeros e provocam alargamento das bandas vibrônicas. Por fim, foi observado que movimentos isotrópicos das cadeias de PV são responsáveis pela transição vítrea dos copolímeros, sendo que as energias necessárias para ativar esses movimentos aumentam com o tamanho da cadeia. Portanto, de forma geral, nossos resultados indicam que mesmo em sistemas com comprimento de cadeias muito bem controlados, as fortes interações intermoleculares presentes em polímeros conjugados, podem tornar a morfologia em estado sólido desses sistemas bastante complexa, sendo que muitas das propriedades ópticas (e provavelmente também elétricas) são afetadas pela forma de empacotamento, desordem conformacional e térmica, além da própria constituição das cadeias. / In this dissertation we present a study of the molecular dynamics and packing in organics semiconductor with different conjugated chains lengths using a of multi-techniques approach, in particular, Nuclear Magnetic Resonance (NMR), Wide Angle X-ray Scattering (WAXS), Differential Scanning Calorimetry (DSC), Raman spectroscopy, UV-Vis absorption and fluorescence spectroscopy. The studies were carried-in fluorene oligomers with 3, 5 and 7 repeat units and multi-block conjugated/non-conjugated copolymers with the conjugated part formed by phenylene-vinylene units (PV) and the non-conjugated block formed by methylene units. Concerning the oligomers studies, it was shown that the ability of the chain to form ordered domains as well as the domain structure depend on the number of repeat units, with the pentamer having a higher tendency to crystallization. This conclusion was supported by theoretical ab-initio calculations, which showed that the pentamer conformation favors inter-chain interactions and therefore long-range ordering. The molecular dynamics studies support these characteristics and showed that the activation of molecular motions in oligomers amorphous phase are predominantly dependent on the oligomeric chain lengths, in agreement with the behavior observed for their glass transitions (Tg´s). In the study concerning the multi-block copolymers, it was found that presence of the aliphatic chains inhibit the strong tendency to crystallization of the PV units, but do not prevent their aggregation. It was found that the dispersion in aggregated units sizes strongly affects the copolymers emission, with the emission of larger chains being privileged. Regarding the molecular dynamics, we observed that the presence of motion on aliphatic region contributes to the appearance of non-radiative relaxation processes that inhibit the emission of the copolymers and produce broadening of the vibronic bands. Finally, we observed that isotropic motions of the PV chains are responsible for the copolymers glass transition and the energy required to activate these movements increase with length of the chain. In summary, our results indicate that even in systems with well controlled chains length, the strong intermolecular interactions present in conjugated polymers, can make the solid state morphology of these systems quite complex, which may affect many optical (and probably electric) properties are affected by the packaging structure, thermal and conformational disorder, in addition to the constitution of the chains composition.

A range of small molecules of interest for use in organic semiconductor devices were studied computationally. Trends in geometry, absorption spectra, molecular orbitals, electrostatic potentials, reorganisation energies were studied. Results suggest that, as with acenes, the performance of non-linear cata-condensed polyaromatic hydrocarbons improves as number of fused benzene rings increases. The torsion in these molecules did not appear to have a large impact on the conjugation across the core and little effect on the absorption spectra, although it did affect the reorganisation energies on which charge mobilities depend. Computational studies of mobilities of anthradithiophene molecules were broadly able to reproduce trends seen experimentally and emphasised the importance of crystal morphology. Experimental work was also carried out to search for cocrystals between anthradithiophene derivatives. Many examples were found with some mixtures forming different cocrystals at different mixture ratios. These results were rationalised by a computational study that showed molecules which had a similar binding energy were more likely to be able to form cocrystals. Cocrystal devices were fabricated and 3 out of 7 showed a larger mobility than devices made out of its constituent materials alone. The best of these had a mobility 65% higher than a device made out of the constituent material with the largest mobility. An energy decomposition analysis was carried out on a novel thallophilic system, a complex of thallium with a neutral β-triketimine ligand which was found to form dimers with close Tl-Tl interactions. Calculations show the electrostatic interaction to be repulsive for the dimer with no counter ions, but attractive when 3,5-bistrifluoromethylphenyl borate counter ions are included. This suggests the metallophilic interaction is counter ion-mediated, requiring the anions to provide favourable electrostatics, even in the case of spatially diffuse and distant counter ions such used here. To enable the studies described here software was written for simulating absorption spectra. An implementation into the Gaussian Suite of programs of an energy decomposition scheme and its extension to include an empirical dispersion correction was also carried out.

This thesis examines strategies to exploit existing materials and techniques to advance organic thin film transistor (OTFT) technology in device performance, device manufacture, and device integration. To enhance device performance, optimization of plasma enhanced chemical vapor deposited (PECVD) gate dielectric thin film and investigation of interface engineering methodologies are explored. To advance device manufacture, OTFT fabrication strategies are developed to enable organic circuit integration. Progress in device integration is achieved through demonstration of OTFT integration into functional circuits for applications such as active-matrix displays and radio frequency identification (RFID) tags. OTFT integration schemes featuring a tailored OTFT-compatible photolithography process and a hybrid photolithography-inkjet printing process are developed. They enable the fabrication of fully-patterned and fully-encapsulated OTFTs and circuits. Research on improving device performance of bottom-gate bottom-contact poly(3,3'''-dialkyl-quarter-thiophene) (PQT-12) OTFTs on PECVD silicon nitride (SiNx) gate dielectric leads to the following key conclusions: (a) increasing silicon content in SiNx gate dielectric leads to enhancement in field-effect mobility and on/off current ratio; (b) surface treatment of SiNx gate dielectric with a combination of O2 plasma and octyltrichlorosilane (OTS) self-assembled monolayer (SAM) delivers the best OTFT performance; (c) an optimal O2 plasma treatment duration exists for attaining highest field-effect mobility and is linked to a “turn-around” effect; and (d) surface treatment of the gold (Au) source/drain contacts by 1-octanethiol SAM limits mobility and should be omitted. There is a strong correlation between the electrical characteristics and the interfacial characteristics of OTFTs. In particular, the device mobility is influenced by the interplay of various interfacial mechanisms, including surface energy, surface roughness, and chemical composition. Finally, the collective knowledge from these investigations facilitates the integration of OTFTs into organic circuits, which is expected to contribute to the development of new generation of all-organic displays for communication devices and other pertinent applications. A major outcome of this work is that it provides an economical means for organic transistor and circuit integration, by enabling use of the well-established PECVD infrastructure, yet not compromising the performance of electronics.

This thesis examines strategies to exploit existing materials and techniques to advance organic thin film transistor (OTFT) technology in device performance, device manufacture, and device integration. To enhance device performance, optimization of plasma enhanced chemical vapor deposited (PECVD) gate dielectric thin film and investigation of interface engineering methodologies are explored. To advance device manufacture, OTFT fabrication strategies are developed to enable organic circuit integration. Progress in device integration is achieved through demonstration of OTFT integration into functional circuits for applications such as active-matrix displays and radio frequency identification (RFID) tags. OTFT integration schemes featuring a tailored OTFT-compatible photolithography process and a hybrid photolithography-inkjet printing process are developed. They enable the fabrication of fully-patterned and fully-encapsulated OTFTs and circuits. Research on improving device performance of bottom-gate bottom-contact poly(3,3'''-dialkyl-quarter-thiophene) (PQT-12) OTFTs on PECVD silicon nitride (SiNx) gate dielectric leads to the following key conclusions: (a) increasing silicon content in SiNx gate dielectric leads to enhancement in field-effect mobility and on/off current ratio; (b) surface treatment of SiNx gate dielectric with a combination of O2 plasma and octyltrichlorosilane (OTS) self-assembled monolayer (SAM) delivers the best OTFT performance; (c) an optimal O2 plasma treatment duration exists for attaining highest field-effect mobility and is linked to a “turn-around” effect; and (d) surface treatment of the gold (Au) source/drain contacts by 1-octanethiol SAM limits mobility and should be omitted. There is a strong correlation between the electrical characteristics and the interfacial characteristics of OTFTs. In particular, the device mobility is influenced by the interplay of various interfacial mechanisms, including surface energy, surface roughness, and chemical composition. Finally, the collective knowledge from these investigations facilitates the integration of OTFTs into organic circuits, which is expected to contribute to the development of new generation of all-organic displays for communication devices and other pertinent applications. A major outcome of this work is that it provides an economical means for organic transistor and circuit integration, by enabling use of the well-established PECVD infrastructure, yet not compromising the performance of electronics.

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal

Une compréhension profonde de la séparation de charge à l’hétérojonction de semi-con- ducteurs organiques est nécessaire pour le développement de diodes photovoltaïques organiques plus efficaces, ce qui serait une grande avancée pour répondre aux besoins mondiaux en énergie durable. L’objectif de cette thèse est de décrire les processus impliqués dans la séparation de charges à hétérojonctions de semi-conducteurs organiques, en prenant en exemple le cas particulier du PCDTBT: PCBM. Nous sondons les excitations d’interface à l’aide de méthodes spectroscopiques résolues en temps couvrant des échelles de temps de 100 femto- secondes à 1 milliseconde. Ces principales méthodes spectroscopiques sont la spectroscopie Raman stimulée femtoseconde, la fluorescence résolue en temps et l’absorption transitoire. Nos résultats montrent clairement que le transfert de charge du PCDTBT au PCBM a lieu avant que l’exciton ne soit relaxé et localisé, un fait expérimental irréconciliable avec la théorie de Marcus semi-classique. La paire de charges qui est créée se divise en deux catégories : les paires de polarons géminales non piégées et les paires profondément piégées. Les premiers se relaxent rapidement vers l’exciton à transfert de charge, qui se recombine radiativement avec une constante de temps de 1– 2 nanoseconde, alors que les seconds se relaxent sur de plus longues échelles de temps via l’effet tunnel. Notre modèle photophysique quantitatif démontre que 2 % de l’excitation créée ne peut jamais se dissocier en porteurs de charge libre, un chiffre qui est en accord avec les rendements élevés rapportés pour ce type de système. / A deep understanding of charge separation at organic semiconductor heterojunctions is instrumental in developing organic photovoltaic diodes with higher power conversion efficiencies, which could be a game changer for meeting sustainable global energy needs. The goal of this thesis is to describe the processes involved in charge separation at organic semiconductor heterojonctions, taking the special case of PCDTBT:PCBM as an example. We probe interfacial excitations using time-resolved spectroscopic methods covering timescales from 100 femtoseconds to 1 millisecond. These main spectroscopic methods are femtosecond stimulated Raman spectroscopy, time resolved fluorescence and transient absorption. Our results unambiguously show that charge transfer from PCDTBT to PCBM happens before the exciton is relaxed and localised, an experimental fact that in irreconcilable with semi-classical Marcus theory. The charge pair that is created then falls into two categories : un-trapped geminate polaron pairs or deeply trapped geminate polaron pairs. The former quickly relax to charge transfer exciton, which relax radiatively with a time constant of 1–2 nanosecond, while the latter form a charge transfer exciton on much longer timescales via tunneling. Our quantitative photo-physical model demonstrate that 2% of created excitation can never dissociate into free charge carrier, a figure that is in agreement with the high efficiencies reported for this type of system.

Nous investiguons dans ce travail la création d'échantillons permettant l'étude du comportement des polaritons excitoniques dans les matériaux semi-conducteurs organiques. Le couplage fort entre les états excités d'électrons et des photons impose la création de nouveaux états propres dans le milieu. Ces nouveaux états, les polaritons, ont un comportement bosonique et sont donc capables de se condenser dans un état fortement dégénéré. Une occupation massive de l'état fondamental permet l'étude de comportements explicables uniquement par la mécanique quantique. La démonstration, au niveau macroscopique, d'effets quantiques promet d'éclairer notre compréhension de la matière condensée. De plus, la forte localisation des excitons dans les milieux organiques permet la condensation des polaritons excitoniques organiques à des températures beaucoup plus hautes que dans les semi-conducteurs inorganiques. À terme, les échantillons proposés dans ce travail pourraient donc servir à observer une phase cohérente macroscopique à des températures facilement atteignables en laboratoire. Les cavités proposées sont des résonateurs Fabry-Perot ultraminces dans lesquels est inséré un cristal unique d'anthracène. Des miroirs diélectriques sont fabriqués par une compagnie externe. Une couche d'or de 60 nanomètres est ensuite déposée sur leur surface. Les miroirs sont ensuite mis en contact, or contre or, et compressés par 2,6 tonnes de pression. Cette pression soude la cavité et laisse des espaces vides entre les lignes d'or. Une molécule organique, l'anthracène, est ensuite insérée par capillarité dans la cavité et y est cristallisée par la suite. Dans leur état actuel, les cavités présentent des défauts majeurs quant à la planarité des miroirs et à l'uniformité des cristaux. Un protocole détaillé est présenté et commenté dans ce travail. Nous y proposons aussi quelques pistes pour régler les problèmes courants de l'appareil. / In this work we investigate the creation of samples for the study of the behavior of excitonic polaritons in organic semiconductor materials. The strong coupling between the excited states of electrons and photons implies the creation new eigenstates in the medium. These new states, called polaritons, are composite bosons and are therefore capable of condensing in a strongly degenerated state. A massive occupation of the ground state allows the study of behaviors that are only explainable by quantum mechanics. A macroscopic demonstration of quantum effects offers a rare opportunity for scientific research and discoveries. The strong localization of excitons in organic materials allows condensation of exciton polaritons at temperatures much higher than in inorganic semiconductors. Therefore the samples proposed in this work could ultimately be used to observe a macroscopic coherent phase at temperatures easily attainable in a laboratory. The cavities proposed in this work are Fabry-Perot resonators in which anthracene is inserted and crystalized. The mirrors used in the resonator are dielectric reflectors made by a external company according to our specifications. A gold layer of 60 nm is deposited on their surface. The mirrors are then brought into contact, gold against gold, and compressed by 2.6 tons of pressure. This pressure seals the cavity and leaves voids between the gold lines. An organic molecule, anthracene, is then inserted in by capillary inside the cavity voids and subsequently crystallized by controlled cooling. In their current state cavities have defects regarding the planarity of the mirrors and the uniformity of the crystals. A detailed protocol is presented and discussed in this work.

This work focusses on the advances of organic light-emitting diodes (OLEDs) for large area display and solid-state-lighting applications. OLED technology has matured over the past two decades, aided by the rapid advances in development of the novel material and device concepts. State-of-the-art OLEDs reach internal efficiencies of 100% and device lifetimes acceptable for commercial display applications. However, further improvements in the blue emitter stability and the device performance at the high brightness are essential for OLED technology to secure its place in the lighting market. As the current passing through the device increases, a rapid decrease in OLED efficiency, so-called efficiency roll-off, takes place, which hinders the use of OLEDs wherever high brightness is required. In addition, white OLEDs comprising multiple emitter molecules suffer from the emission colour change as the operating conditions are varied or as the devices age. Despite side-by-side structuring of the monochrome OLEDs could in principle circumvent most of bespoke issues, the limitations imposed by the shadow mask technique, employed to structure vacuum deposited films, renders such approach impractical for fabrication of the devices on a large scale. In order to address these issues, photolithographic patterning of OLEDs is implemented. Highly efficient state-of-the-art devices are successfully structured down to tens of micrometers with the aid of orthogonal lithographic processing. The latter is shown to be a promising alternative for the shadow mask method in order to fabricate the full-colour RGB displays and solid-state-lighting panels. Photo-patterned devices exhibit a virtually identical performance to their shadow mask counterparts on a large scale. The high performance is replicated in the microscale OLEDs by a careful selection of functional layer sequence based on the investigation of the morphological stability and solubility of vacuum deposited films. Microstructured OLEDs, fabricated in several different configurations, are investigated and compared to their large area counterparts in order to account for the observed differences in charge transport, heat management and exciton recombination in bespoke devices. The role of the Joule heat leading to the quenching of the emissive exciton states in working devices is discussed. Structuring the active OLED area down to 20 micrometer is shown to improve the thermal dissipation in such devices, thus enabling the suppression of the efficiency roll-off at high brightness in white-emitting electroluminescent devices based on side-by-side patterned OLEDs. / Die vorliegende Arbeit beschäftigt sich mit den neusten Errungenschaften von organischen Licht-emittierenden Dioden (OLEDs) für großflächige Beleuchtungs- und Displayanwendungen. Die OLED-Technologie hat sich in den letzten zwei Jahrzehnten, begünstigt von neuartigen Material- und Bauteilkonzepten, weit entwickelt. Im aktuellen Stand der Technik erreichen OLEDs sowohl interne Effizienzen von 100% als auch Lebensdauern die für die kommerzielle Nutzung in Displays ausreichend sind. Nichtsdestotrotz sind weitere Verbesserungen für die Stabilität blauer Emitter und die Leistungsfähigkeit bei hohen Leuchtstärken erforderlich, damit die OLED Technologie ihren Platz auf dem Markt behaupten kann. Mit steigender Stromstärke, die durch ein solches Bauteil fließt, sinkt die Effizienz rapide (der sogenannte Effizienz-Roll-Off), was die Nutzung von OLEDs verhindert, wann immer hohe Leuchtstärken erforderlich sind. Zusätzlich verändern weiße OLEDs ihre Farbkomposition durch die unterschiedliche Alterung der unterschiedlichen Emittermoleküle oder veränderte Einsatzbedingungen. Obwohl die laterale Strukturierung nebeneinander aufgebrachter, monochromer OLEDs diese Probleme umgehen könnte, ist diese Herangehensweise durch die aktuelle Schattenmasken-Technologie limitiert, welche zur Strukturierung vakuumprozessierter Dünnschichten eingesetzt wird, und somit unpraktikabel für die Massenproduktion. Um diese Problemstellungen zu umgehen, wird hier die photolithographische Strukturierung von OLEDs angewendet. Mithilfe der orthogonalen Lithographie können hocheffiziente Bauteile damit erfolgreich auf Größenordnungen von 10 Mikrometer strukturiert werden. Dies zeigt, dass die orthogonale Prozessierung eine vielversprechende Alternative für die Schattenmasken-Technologie darstellt und für die Herstellung von RGB-Displays und Beleuchtungspanelen geeignet ist. Photostrukturierte Bauteile zeigen dabei eine nahezu identische Leistungsfähigkeit zu solchen, die großffächig mittels Schattenmasken hergestellt wurden. Diese hohe Leistungsfähigkeit kann hierbei durch eine sorgfältige Auswahl der einzelnen funktionellen Schichten erreicht werden, welche auf Untersuchung von morphologischer Stabilität und Löslichkeit dieser Schichten basiert. Mikrostrukturierte OLEDs in verschiedenen Konfigurationen werden mit ihren großflächigen Gegenstücken verglichen, um beobachtete Abweichungen im Ladungstransport, der Wärmeverteilung, sowie der Exzitonenrekombination zu erklären. Die Rolle der Joule'schen Wärme, die zur Auslöschung der emittierenden Exzitonenzustände führt, wird hier diskutiert. Die thermische Dissipation kann dabei verbessert werden, indem die aktive Fläche der OLED auf 20 Mikrometer herunterstrukturiert wird. Folglich kann der Effizienz-Roll-Off bei hohen Leuchtstärken in lateral strukturierten weißen elektrolumineszenten Bauteilen unterdrückt werden.