This thesis describes the process of developing a robust phase measurement technique with which to analyse semiconductor based devices intended for use in optoelectronic/all optical networks. The devices measured are prospective dispersion compensators, based either on planar photonic crystal waveguides or coupled microcavities connected by ridge waveguide. The technique was validated by measuring the phase transfer function of a Fabry Perot etalon. This demonstrated that even when detecting low optical powers (sub μW), accurate measurement of phase could quickly be carried out over a significant spectral range (~10nm). Comparison of experimental data taken from the prospective dispersion compensators with theory showed excellent agreement, which provided qualitative (cavity spacing and reflectivity) and quantitative (loss) measures of device performance. The phase measurement technique has been designed to be capable of measuring other classes of device also, including active devices such as semiconductor optical amplifiers. This suggests the phase measurement technique may be valuable in analysing the variation of dispersion as a function of applied bias, peak power or temperature for a variety of devices.

Light can exert optical forces on matter. In the macroscopic world these forces are minuscule, but on the microscopic or atomic scale, these forces are large enough to trap and manipulate particles. They may even be used to cool atoms to a fraction of a degree above absolute zero. This thesis details a number of experiments concerned with the optical manipulation of atoms and micron-size particles using free space light beams and photonic crystal fibres. Two atom guiding experiments are described. In the first experiment, a spatial light modulator is used to generate higher blue-detuned azimuthal Laguerre-Gaussian LG) beams, which are annular beams with a hollow core. These LG beams are then used to guide laser cooled rubidium-85 atoms within the dark core over a distance of 30 mm. The second atom guiding experiment involves attempting to guide laser cooled and thermal rubidium atoms through a hollow-core photonic crystal fibre using red-detuned light. Hollow-core photonic crystal fibres are fibres that are able to guide light with low attenuation within a hollow core. For this experiment a hot wire detection system was designed, along with a number of complex vacuum systems. The first dual-beam fibre trap for micron-size particles constructed using endlessly single-mode photonic crystal fibre (ESM-PCF) is described. The characteristics of dual-beam fibre traps are governed by the fibres used. As ESM-PCF has considerably different properties in comparison to conventional single- or multimode fibres, this dual beam ESM-PCF trap exhibits some novel characteristics. I show that the dual beam ESM-PCF trap can form trapping, repulsive and line potentials; an interference-free ‘white light’ trap; and a dual-wavelength optical conveyor belt.

Silicon Photonics has been a major success story in the last decade, with many photonic devices having been successfully demonstrated. The only missing component is the light source, however, as making an efficient light source in silicon is challenging due to the material's indirect bandgap. The development of a silicon light source would enable us to make an all-silicon chip, which would find many practical applications. The most notable among these applications are on-chip communications and sensing applications. In this PhD project, I have worked on enhancing silicon light emission by combining material processing and device engineering methods. Regarding materials processing, the emission level was increased by taking three routes. In all the three cases the emission was further enhanced by coupling it with a photonic crystal (PhC) cavity via Purcell effect. The three different approaches taken in this PhD project are listed below. 1. The first approach involves incorporation of optically active defects into the silicon lattice by hydrogen plasma treatment or ion implantation. This process results in broad luminescence bands centered at 1300 and 1500 nm. By coupling these emission bands with the photonic crystal cavity, I was able to demonstrate a narrowband silicon light emitting diode at room temperature. This silicon nano light emitting diode has a tunable emission line in the 1300-1600 nm range. 2. In the second approach, a narrow emission line at 1.28µm was created by carbon ion implantation, termed “G-line” emission. The possibility of enhancing the emission intensity of this line via the Purcell effect was investigated, but only with limited success. Different proposals for future work are presented in this regard. 3. The third approach is deposition of a thin film of an erbium disilicate on top of a PhC cavity. The erbium emission is enhanced by the PhC cavity. Using this method, an optically pumped light source emitting at 1.54 µm and operating at room temperature is demonstrated. A practical application of silicon light source developed in this project in gas sensing is also demonstrated. As a first step, I show refractive index sensing, which is a simple application for our source and demonstrates its capabilities, especially relating to the lack of fiber coupling schemes. I also discuss several proposals for extending applications into on-chip biological sensing.

<p>Microphotonics has been offering a body of ideas to prospective applicationsin optics. Among those, the concept of photonic integrated circuits (PIC’s) has recently spurred a substantial excitement into the scientific community. Relisation of the PIC’s becomes feasible as the size shrinkage of the optical elements is accomplished. The elements based on photonic crystals (PCs) represent promising candidacy for manufacture of PIC’s. This thesis is devoted to tailoring of optical properties and advanced modelling of two types of photonic crystals: (Bi₃Fe₅O₁₂/Sm₃Ga₅O₁₂)<em>^m</em> and (TiO₂/Er₂O₃)<em>^m</em> potentially applicable in the role optical isolators and optical amplifiers, respectively. Deposition conditions of titanium dioxide were first investigated to maximise refractive index and minimise absorption as well as surface roughness of titania films. It was done employing three routines: deposition at elevated substrate temperatures, regular annealing in thermodynamically equilibrium conditions and rapid thermal annealing (RTA). RTA at 500 ^oC was shown to provide the best optical performance giving a refractive index of 2.53, an absorption coefficient of 404 cm⁻¹ and a root-mean-square surface roughness of 0.6 nm. Advanced modelling of transmittance and Faraday rotation for the PCs (Bi₃Fe₅O₁₂/Sm₃Ga₅O₁₂)⁵ and (TiO₂/Er₂O₃)⁶ was done using the 4 × 4 matrix formalism of Višňovský. The simulations for the constituent materials in the forms of single films were performed using the Swanepoel and Višňovský formulae. This enabled generation of the dispersion relations for diagonal and off-diagonal elements of the permittivity tensors relating to the materials. These dispersion relations were utilised to produce dispersion relations for complex refractive indices of the materials. Integration of the complex refractive indices into the 4 × 4 matrix formalism allowed computation of transmittance and Faraday rotation of the PCs. The simulation results were found to be in a good agreement with the experimental ones proving such a simulation approach is an excellent means of engineering PCs.</p>

There is an ongoing evolution of technology towards network convergence and ubiquitous information society in which users have broadband access to information resources and services anywhere, anytime. To realize this vision, a communication infrastructure has to be able to support a core backbone network delivering ultra-high capacity data services, a ubiquitous broadband wireless for last-mile access, and a control/management plane providing intelligent control to the infrastructure. Desirable characteristics of the infrastructure include insertion of future technology, intelligent spectrum management, cost-efficient upgradeability, flexible scalability, and cognitive networking capabilities. Unfortunately, present electronic technology alone is incapable of meeting these requirements.This dissertation describes the initial research into the realization of such an architecture that comprises of three crucial frameworks: 1) photonic-based; 2) dynamic chain processing; 3) and physical layer awareness. Due to the superior signal transport properties of optics, an underlying photonic data layer is able to provide the architecture with much wider bandwidth, greater RF-frequency-scalability, and higher operating RF-frequency. Photonics also enables diverse technologies to be integrated into a seamless communications platform. Dynamic processing chain framework provides the flexibility and future-proof capability via reconfigurability and componentization. Physical-layer-awareness offers support for automated adaptation and intelligent configuration of the data plane in response to the dynamic conditions of the physical layer. Crucial functional blocks in this awareness are: efficient estimation of physical impairments of the components and links; an effective dynamic impairment monitoring mechanism; and proficient adaptation to either maximize or optimize performance.Though the architecture encompasses both optical transport network (OTN) and photonic radio, this dissertation focuses more on the OTN. Central themes of OTN in this dissertation include relating Q-factor with various optical impairments from the perspective of an end-to-end optical path, and extending physical layer awareness with impairment routing. One of the key findings advocates that filtering is a serious limitation to bit-rate independence, protocol independence and network scalability promised by transparent network.

Selectively-transparent and conducting photonic crystals (STCPCs) made of alternating layers of sputtered indium-tin oxide (ITO) and spin-coated silica (SiO2) nanoparticle films have potential applications in micromorph solar cells and building integrated photovoltaics (BIPVs). In this work, theoretical calculations have been performed to show performance enhancement of the micromorph solar cell upon integration of the STCPC an intermediate reflector. Thin semi-transparent hydrogenated amorphous silicon (a-Si:H) solar cells with STCPC rear contacts are demonstrated in proof-of-concept devices. A 10% efficiency increase in a 135nm thick a-Si:H cell on an STCPC reflector with Bragg peak at 620nm was observed, while the transmitted solar irradiance and illuminance are determined to be 295W/m2 and 3480 lux, respectively. The STCPC with proper Bragg peak positioning can boost the a-Si:H cell performance while transmitting photons that can be used as heat and lighting sources in building integrated photovoltaic applications.

This thesis presents a study into structural colours that exist in natural samples, the principle aim of which is to produce experimental methods by which these colours may be examined and evaluated. In order to achieve this, previously observed structures are described, electromagnetic theory is summarised and a series of samples are examined constituting examples of the structures present in nature. The first sample discussed is the multilayer in the epicuticle of the buprestid beetle, C. raja. In order to evaluate the refractive indices of the layers contained within this structure, existing optical techniques are used to establish absolute reflection spectra for a number of angles of incidence in both linear polarisations. The approximate design for the structure is obtained by electron microscopy and modelled using Fresnel's equations. This model is then refined by a recursive least squares fitting routine to obtain the refractive indices. The second sample is the diffuse white scattering structure in the scales of two white beetles, Lepidiota stigma and Cyphochilus spp. The reflection from these scales is measured and found to be brilliantly white due to the irregular internal structure of the scales. Comparison of the Fast Fourier Transforms of TEM images of the internal structure with the diffraction pattern obtained from monochromatic laser light diffracting through a single scale demonstrate a link between this structure and photonic effects. The third sample type are found in the scales of the large true weevils, Eupholus schoenherri pettiti and E. magnificus. These scales are shown to have a domained structure in which the domains were oriented differently to each other. Single domains are shown to exhibit different colours at different orientation. The final sample is the highly regular 2-dimensional diffraction grating observed in a marine diatom, Coscinodiscus wailesii. Diffraction is demonstrated by measuring the in-plane diffraction from a single frustule for both monochromatic laser light and white light, showing an enhanced transmission for red wavelengths. Subsequent imaging of the transmitted diffraction pattern allows for the calculation of the transmitted power in each diffracted order.

This thesis presents an investigation into some of the structural colours that are produced in nature. There are many animals and plants that produce structural colour, with a particularly high structural colour diversity in insects. Of the species that exhibit structural colours, three species are the subjects for investigation of this thesis. Those comprise a group of beetles from South-East Asia, Torynorrhina flammea, a buttery, Parides sesostris and a fruit, Margaritaria nobilis, both from South American rainforests. The structures that produce the vivid colours of these species were analysed using electron microscopy. This information aided the design and creation of three inorganic, synthetic replicas of the natural structures. The fruit of Margaritaria nobilis was structurally analysed, yielding the discovery of a novel multilayer fibre. These fibres were cylindrical in design and were found to be layered together producing the epidermis of the fruit. The multilayer structure produced a vivid blue colour appearance, which is believed to offer a selective advantage because the colour deceives birds into thinking that the fruit contains nutritious flesh. This selective advantage earns M. nobilis the label of mimetic fruit. The structure found within the M. nobilis fruit epidermis inspired the synthesis of a structure which comprises single cylindrical multilayer fibres. The synthetic fibres were manufactured from elastic materials which allow the structure to be deformed under strain and, therefore, a change in colour can be observed. As the structure was stretched, this made the layers get thinner and, therefore, the colour of the fibre blue-shifted. The fibre was able to be stretched to over twice its original length which yields a shift in peak reflected wavelength of over 200 nm. Four beetles from the Torynorrhina flammea species were investigated with the aim of replicating the nanostructures responsible for their colour appearance. The initial interest in the beetles came from their strikingly vivid colour appearances. The structure responsible for the vivid colours in all four of the subspecies is a multilayer with high structural order and over 100 laminae. Both of these attributes contribute to the saturation of the colours exhibited. The multilayer was found to be intersected by an array of rods, the long axis of which is orthogonal to the surface. The rods are believed to be the cause of an interesting diffraction phenomenon exhibited by the beetles. Using imaging scatterometry, the structure was found to diffract the colour produced by the multilayers into an annulus around a specularly reflected white spot. This inspired the synthesis of a multilayer permeated with an array of holes with the aim of replicating a system that could reproduce the annular pattern of colour reflection. The initial synthesised system comprised a quarter-wave stack with a perfectly ordered hexagonal array of holes permeating the surface orthogonally. The sample displayed the scattering characteristics of a hexagonal array, and the reflection spectra of the multilayer stack. When disordered hexagonal arrays were milled into the structure with a focussed ion beam, the scattering pattern started to show more of the green colour from the multilayer and less of the ordered scattering pattern. The highly disordered, synthesised structure displayed no hexagonal scattering pattern, but instead it showed a highly scattered bluish-green colouration. One sample was created by directly mapping out the array of holes using an image of the original array from one of the beetle samples. This sample was expected the same annular diffraction pattern as the beetles, however, the sample instead exhibited the same scattering pattern as the highly disordered array. Some structurally coloured systems in nature have more than one light scattering structure, all of which contribute to the overall colour of the system. For complicated systems such as this, it is necessary to devise a technique to characterise the individual scattering structures separately. One such species that displays a complex, multicomponent system is Parides sesostris. The male of the species displays bright green patches on the dorsal side of the forewings which are made up of thousands of green wing scales. These green scales contain a 3D gyroid poly-crystal at centre with a membrane layer surrounding the underside of each scale and a scattering structure on top. Using focussed ion beam milling techniques allowed the individual characterisation of each of these structures. The gyroid poly-crystal was found to reflect not green but blue wavelengths. This led to the discovery by another group [1] that the scales contain at least one type of fluorophore. The removal of the membrane structure and some of the gyroid poly-crystal from the base of the scale resulted in the change of the overall scale structure from green to cyan. This suggests that the membrane maybe a significant source of fluorescence. Computational modelling, without fluorescence, suggests that the addition of the membrane layer to the gyroid does not shift the band-gap wavelengths; however, the overall reflection intensity does increase. The scattering structure on the top side of each scale is comprised a bi-grating which sits on top of the 3D gyroid structure. The long periodicity of the bi-grating protrudes above the surface, resulting in the very top layer of the scale to be a mono-grating. This whole structure decreases the angular-dependence of the colour by efficiently scattering the incident light into the gyroid and also scattering the reflected light from the gyroid, resulting in a double-scattering. FIB-milling was used to isolate the scattering part of the structure. Analysis of this component of the structure revealed that it was not a source of the green colour itself; however, it did show the characteristic scattering pattern of a mono-grating. The small periodicity of the bi-grating did not produce a scattering pattern since the periodicity is too small to produce optical diffraction at normal incidence. To characterise the effect of the fluorophores, the whole scale structure was photo-bleached using ultra-violet radiation for two months with the aim of destroying the fluorophores contained within the structure. The expected result occurred which was the blue-shifting of the peak reflected wavelengths. However, it could not be confirmed whether or not the photo-bleaching reduced the physical size of the light scattering structures which would, in theory, result in a blue-shift of the peak reflected wavelengths. The male P. sesostris green wing scales were also the subject for investigation for trying to make inorganic replicas of the gyroid-polycrystal. A surface sol-gel coating process was utilised to coat the green wing scales with titania. This coating process was performed using a few different methods. Half of the samples were coated with TiO2 and the other half with tin-doped TiO2. Half of each of these samples had their surfaces dendritically amplified before the coating processes and the other half were left untreated. The samples were coated with 25 surface sol-gel (SSG) cycles of each treatment at a time. After each 25 cycle treatment the samples were optically characterised. The total number of cycles applied to the samples at the end was 150. The addition of layers of titania resulted in a general red-shift that was higher for the tin-doped titania samples than for the titania samples. Another general trend found was that the samples that had their surfaces dendritically amplified, produced a lower red-shift in peak wavelength. This was contrary to the hypothesis that the amplification process was supposed to aid the SSG coating process and, therefore, increases the red-shift in peak wavelength.

Nanometer-sized semiconductor crystals, termed ‘quantum dots’, are of fundamental interest because of their size-tunable properties. Three-dimensional quantum confinement of charge carriers by the small crystal size results in discrete atomic-like electronic states. This dissertation describes the synthesis and in-depth characterization of lead chalcogenide colloidal quantum dots for forthcoming applications as near-infrared single photon emitters. An efficient single photon source that operates at telecommunication wavelengths (between 1.3 and 1.6 µm) is a basic requirement for many photonic quantum technologies, such as quantum computing and quantum cryptography. Chapters 1 and 2 of this work provide an introduction to colloidal quantum dots and their use as single photon emitters. It includes a description of photonic crystal microcavities and their ability to enhance the spontaneous emission rate of quantum dots. The synthesis and basic characterization of PbSe and PbS quantum dots is then discussed in chapter 3. In particular, a new synthetic method for the preparation of highly photoluminescent PbS quantum dots is presented. PbSe/CdSe core/shell quantum dots prepared by a cation exchange reaction are also described and a significant improvement in photo-stability is shown. Chapter 3 concludes with a description of three different surface modification techniques. PbSe core and PbSe/CdSe core/shell materials are investigated further in chapter 4 by advanced characterization techniques that include high-angle annular dark field (HAADF) imaging, energy-filtered transmission electron microscopy (EF-TEM) imaging, energy-dependent X-ray photo-electron spectroscopy (XPS), small angle X-ray scattering (SAXS), and small angle neutron scattering (SANS). The information obtained from these techniques is combined to form a structural model of the PbSe core and PbSe/CdSe core/shell quantum dots with greater complexity than previously reported. In chapter 5, the temperature-dependent photoluminescence from PbSe and PbSe/CdSe core/shell quantum dots is discussed and a thermal model is presented that accounts for the large (non-trivial) temperature dependence of the Stokes shift and photoluminescence lineshape over the entire temperature range (4.5 to 295 K). Chapter 6 examines two scalable methods to integrate the colloidal quantum dots into silicon two-dimensional photonic crystal slab microcavities (a requirement for efficient single photon emission). Finally, conclusions and possible future work are discussed in chapter 7. / Graduate

The commissioning and development of a laser-wire transverse electron beam profile monitor at the Accelerator Test Facility 2 in Japan is presented. The experimental setup used including a gigawatt laser system is detailed and characterised. Results from data taking in December 2010 are presented detailing the use of the laser-wire to tune the electron beam. In conjunction with this, the use of a fibre-based laser system as a suitable laser source for a laser-wire is discussed. A test bed fibre laser system was constructed to investigate the suitability of fibre lasers and the results are presented demonstrating high efficiency and excellent spatial quality. From this, a laser system capable of high resolution and high repetition intra-train scanning for demonstration at the Accelerator Test Facility 2 was designed, constructed and characterised. A commercial fibre laser system was extended using a photonic crystal fibre where periodic amplification designed to match the duty cycle of an accelerator was used advantageously to achieve higher than normal pulse energies. The results and techniques developed to measure them are presented.