No description available.

Renewable materials have been put into the spotlight as the demand for environmentally responsible feedstocks grows yearly. Lignin, an abundant and renewable aromatic polymer, which can source a diverse cast of derivative structures, has yet to rise to the potential it possesses as a material in high technological applications. The expansion of studies and growing interest in its versatility has brought forth materials such as lignin nanoparticles, coatings, films, second generation alcohols, phenolic building blocks for drug synthesis, and many others. Among the many valorization methods thus far pursued, photochemical methods have received relatively low representation, incurring several challenges stemming from less desirable interactions of lignin as a substrate directly with light. As the search for clean, low-emissive processes with high scale-up potential for lignin valorization continued, advances and studies on the benefits and challenges on the use of photochemistry with this class of compounds became the focus of this work. This thesis will primarily aim to highlight our efforts to find photocatalytic materials and systems to achieve lignin valorization, discuss its limitations and benefits, and provide a pathway towards potential applications of these reactions. Our core values were to find conditions that worked well, but also translating that success into systems that could be greener and less dangerous or environmentally impactful. We can report to have achieved single-product yields of over 2% in protolignin valorization reactions using Pd and Au based nanoparticles, supported on niobium-based materials. We have also reached up to 2% yields in visible-light reactions using CdSe quantum dots. While literature reports tend to overwhelmingly focus on lignin models, we have kept ours on real lignin, which while more complex and challenging, does present more relevant results in the long run for this field. These results, in addition to molecular model valorization experiments, present a promising prospect for the application of photocatalysis in lignin valorization for the future.

Photoredox catalysis has been a flourishing field in synthetic organic chemistry. Organic chemists have been inspired by Nature and the conversion of photons into potential energy by light-harvesting biomolecules. Recent developments in photoredox catalysis have led to a rapid increase in development of new methodologies in synthetic organic chemistry. The use of transition metal photocatalysts and organic dyes in photo-mediated processes has been proven to be an effective alternative to the harsh and toxic reaction conditions that area needed in classical radical formation. Photoredox catalysis eliminates the need of initiators, stoichiometric additives, and strong oxidants, and allows for the highly efficient formation of new C-C bonds under mild conditions. Photochemistry and radical chemistry work in unison in their ability to undergo photoinduced single electron transfers (SET) or photoinduced electron transfers (PET) and enable one electron reaction pathways. A plethora of photocatalysts have been developed, mainly using Ir- and Ru-based polypyridyl complexes. Polynuclear gold complexes have come to light in the last decade as another class of photocatalysts. This bench stable complex is marked by its unique photophysical and electrochemical properties, most notable the relatively long-lived excited state. This triplet excited state can be used as a powerful reductant or oxidant when irradiated with UVA light. A class of organic substrates that can be used when working with this gold photocatalyst, is nonactivated bromoalkanes, which could not be used if working with other photocatalysts. First, the alkylative semi-pinacol using gold photoredox chemistry and nonactivated bromoalkanes was described. A new mode of reactivity of the gold binuclear photocatalyst was found where it was shown to work as a photocatalyst and a Lewis acid. Next, a follow-up to that report was the halogen atom transfer radical addition (ATRA) using gold photoredox catalysis. A mild ATRA reaction was presented where the dual reactivity of the gold photocatalyst was exploited. Mild bromine and iodine transfer reactions, without the use of strong oxidants or toxic additives, are largely unknown, and a metal-based mechanistic pathway was proposed to explain this transformation. Minisci-type alkylation is of high-interest in the field of medicinal chemistry and drug discovery. With this is mind, a photoredox catalysed Minisci reaction was presented, where the alkylation of an activated heteroarenes was achieved by HAT via chlorine atom generation. Knowing this, the alkylation using primary alcohols was presented, were a the 𝛼-alkoxy radical is formed after a HAT by chlorine atom. When secondary alcohols were used, a reduction of the heteroarene occurred and was described. Finally, a photo-mediated [3 + 2] cycloaddition using N-aryl cyclopropylamines and α, β- unsaturated carbonyl systems was described. This simple method that was presented does not require the use of photocatalysts or added additives, as it is self-catalyzed. The reaction is proceeding through a single electron transfer (SET) and offers a wide scope for the synthesis of N-arylaminocycloalkyl compounds. Overall, the collection of work described in this thesis represents the growth of photoredox catalysis in organic synthetic chemistry and the ability to form highly reactive radical without the need of harsh conditions, toxic reagents, or strong oxidants. The use of binuclear gold(I) complexes as a photocatalyst with unique photophysical and electrochemical properties was shown. Compared to Ir- and Ru-based polypyridyl complexes, which cannot react with nonactivated bromoalkanes, the binuclear gold(I) complexes offer broader redox potentials and a newfound dual mode of reactivity. Furthermore, photo-mediated synthetical useful reactions were shown. The application of photoredox catalysis in synthetic chemistry will continue to flourish, and this work is sample of all the possibilities that a simple photon can bring.

The thesis focuses on synthesis and characterization of nanocatalysts for applications in wastewater treatment and hydrogen production through electrochemical water splitting. Different photocatalysts and electrocatalysts are synthesized using wet chemistry techniques as well as Pulsed Laser Deposition (PLD). The synthesized catalysts pave demonstrate excellent catalytic activity thereby paving way for their use on an industrial scale.

Thesis (PhD)--Stellenbosch University, 2001. / ENGLISH ABSTRACT: The photo-mineralization of organic compounds (in the combined presence of a Ti02 based semiconductor catalyst, UV radiation and molecular oxygen) represents an advanced oxidation technology with significant potential for environmental pollution abatement. This oxidation process (generally known as photocatalytic oxidation - PCO) is currently the subject of extensive global research, with the main objective being the oxidative removal of organic and inorganic pollutants from water, air and soil. Presently, many barriers still block the way to commercial implementation of this technology, hence a unique (and effective) configuration of catalyst, light source and reactor design needs to identified. In terms of the water treatment scenario (which is the emphasis of this work) the need exists to develop a practical and affordable PCO reactor for water treatment on a large scale. The two laboratory-scale PCO reactors investigated in this work were based on a "falling film" flow reactor design and were constructed with commercially available materials and components. Degussa P-25 Ti02 was used as semiconductor catalyst and two types of low-pressure mercury lamps as the UV light source. Three modes of operation were investigated in order to determine the practical feasibility of the reactors. These included the recirculation, single pass and sequential single pass modes. The reactors were operated either as a Ti02 slurry-phase reactor (Reactor 1), or with Ti02 immobilized on stationary fiber glass and fibrous activated carbon sheet modules (Reactors 2A and 28 respectively). Extensive parametric evaluations were done using conventional one-factor variation and statistical methods according to optimal experimental design principles. The PCO treatment of two model organic pollutants (para-Chlorophenol and cyanobacterial microcystin YA, YR, LR and RR) were investigated. These pollutants were spiked into various water matrices to the desired concentration level. The combined photocatalyticcarbon adsorption treatment of these two pollutants was also investigated in Reactor 28. The experimental results obtained through this work showed that both model pollutants were successfully degraded in several water matrices by means of treatment in the respective PCO reactors. Moreover, this research was the first ever demonstration of the Ti02 photocatalytic degradation of microcystin toxins in the aqueous phase. The large number of parametric and optimization studies yielded the relative contributions of the various process parameters (in terms of the defined photocatalytic efficiency parameters as responses) very effectively. Furthermore, statistical evaluation of the experimental data provided valuable insight into the scientific phenomena associated with Ti02 mediated PCO processes. / AFRIKAANSE OPSOMMING: Die foto-mineralisasie van organiese verbindings (in die gekombineerde teenwoordigheid van 'n Ti02 gebaseerde halfgeleier katalisator, UV straling en molekulêre suurstof) verteenwoordig 'n gevorderde oksidasie-tegnologie met beduidende potensiaal vir bekamping van omgewingsbesoedeling. Hierdie oksidasie-proses (algemeen bekend as fotokatalitiese oksidasie - FKO) is tans wêreldwyd die onderwerp van ekstensiewe navorsing, met hoofdoel die oksidatiewe verwydering van organiese en anorganiese besoedelingstowwe uit water, lug en grond. Huidiglik bestaan daar nog vele struikelblokke wat die weg na kommersiële implementering van hierdie tegnologie blokkeer, gevolglik moet 'n unieke (en effektiewe) konfigurasie van katalisator, ligbron en reaktor-ontwerp nog identifiseer word. In terme van die waterbehandeling situasie (wat die klem van hierdie werk is) bestaan die nodigheid om 'n praktiese en bekostigbare FKO reaktor te ontwikkel vir watersuiwering op 'n groot skaal. Die twee laboratorium-skaal FKO reaktore in hierdie studie was gebaseer op 'n "vallende film" vloeireaktor ontwerp en is gekonstrueer met kommersieël beskikbare materiale en komponente. Degussa P-25 Ti02 is aangewend as halfgeleier katalisator en twee tipes lae-druk kwik lampe as die UV ligbron. Drie bedryfsmodes is ondersoek met die doel om die praktiese haalbaarheid van die reaktore te bepaal. Hierdie het ingesluit die resirkulasie, enkeldeurvloei en enkeldeurvloei-sekwensie modes. Die reaktore is bedryf as óf 'n Ti02 flodder-fase reaktor (Reaktor 1) óf met Ti02 ge-immobiliseer op 'n stasionêre veselglas en veselagtige ge-aktiveerde koolstof blad-modules (Reaktor 2A en 28 onderskeidelik). Omvattende parametriese evaluasies is gedoen deur gebruik te maak van konvensionele een-faktor variasie en statistiese metodes na aanleiding van optimale eksperimentele ontwerp beginsels. Die FKO behandeling van twee modelorganiese besoedelingstowwe (para-Chlorofenol en siano-bakteriese mikrosistien YA, YR, LR en RR) is ondersoek. Hierdie besoedelingstowwe is ge-ent in verskeie watermatrikse tot die verlangde konsentrasievlak. Die gekombineerde fotokatalitiese - aktiveerde koolstof behandeling van die twee besoedelingstowwe is ook ondersoek in Reaktor 28. Die eksperimentele resultate verkry deur hierdie werk het getoon dat beide die modelbesoedelingstowwe suksesvol gedegradeer is in verskeie watermatrikse deur behandeling in die onderskeie FKO reaktore. Trouens, hierdie navorsing was die eerste demonstrasie ooit van die Ti02 fotokatalitiese degradasie van mikrosistien toksiene in die waterige fase. Die groot aantal parametriese en optimiseringstudies het die bydraes van die verskeie proses-parameters (in terme van die gedefinieerde fotokatalitiese effektiwiteitsparameters as response) baie effektief verskaf. Verder, statistiese evaluasie van die eksperimentele data het waardevolle insig verskaf tot die wetenskaplike verskynsels te assosieer met Ti02 gemedieërde FKO prosesse.

This dissertation presents a method for enhancement of the efficiency and scalability of photocatalytic water purification systems, along with an experimental validation of the concept. A 3-dimensional photocatalyst structure, made from a TiO2-SiO2 composite, has been designed and fabricated for use in a custom designed LED-source illumination chamber of rotational symmetry that corresponds with the symmetry of the photocatalyst material. The design of the photocatalyst material has two defining characteristics: geometrical form and material composition. The design of the material was developed through the creation of a theoretical model for consideration of the system's photonic efficiency. Fabrication of the material was accomplished using a Ti alkoxide solution to coat a novel 3D support structure. The coatings were then heat treated to form a semiconducting thin-film. The resulting films were evaluated by SEM, TEM, UV-vis spectroscopy and Raman spectroscopy. The surface of the material was then modified by implantation of TiO2 and SiO2 nanoparticles in order to increase catalytic surface area and improve the photoactivity of the material, resulting in increased degradation performance by more than 500%. Finally, the efficiency of the photocatalytic reactor was considered with respect to energy usage as defined by the Electrical Energy per Order (EEO) characterization model. The effects of catalyst surface modification and UV-illumination intensity on the EEO value were measured and analyzed. The result of the modifications was an 81.9% reduction in energy usage. The lowest EEO achieved was 54 kWh per cubic meter of water for each order of magnitude reduction in pollutant concentration -- an improvement in EEO over previously reported thin-film based photoreactors.

Photocatalysis is an advanced oxidation process for the purification and remediation of contaminated waters and wastewaters, and is advantageous over conventional treatment technologies due to its ability to degrade emerging and recalcitrant pollutants. In addition, photocatalytic disinfection is less chemical-intensive than other methods such as chlorination, and can inactivate even highly resistant microorganisms with good efficacy. Process sustainability and cost-effectiveness may be improved by utilizing solar irradiation as the source of necessary photons for photocatalyst excitation. However, solar-induced activity of the traditionally-used titania is poor due to its inefficient visible light absorption, and recombination of photo-excited species is problematic. Additionally, mass transfer limitations and difficulties separating the catalyst from the post-treatment slurry hinder conversions and efficiencies obtainable in practice. In this research, various strategies were explored to address these issues using novel visible light active photocatalysts. Two classes of carbon-enhanced photocatalytic materials were studied: activated carbon adsorbent photocatalyst composites, and carbon-doped TiO2. Adsorbent photocatalyst composites based on activated carbon and plasmonic silver/silver chloride structures were synthesized, characterized, and experimentally investigated for their photocatalytic activity towards the degradation of model organic pollutants (methyl orange dye, phenol) and the inactivation of a model microorganism (Escherichia coli K-12) under visible light. The adsorptive behaviour of the composites towards methyl orange dye was also studied and described according to appropriate models. Photocatalytic bacterial inactivation induced by the prepared composites was investigated, and the inactivation mechanisms and roles of incorporated antimicrobial silver on disinfection were probed and discussed. These composites were extended towards magnetic removal strategies for post-use separation through the incorporation of magnetic nanoparticles to prepare Ag/AgCl-magnetic activated carbon composites, and the effect of nanoparticles addition on the properties and photoactivities of the resulting materials was explored. Another silver/silver halide adsorbent photocatalyst composite based on activated carbon and Ag/AgBr exhibiting visible light absorption due to both localized surface plasmon resonance and optical band gap absorption was synthesized and its photocatalytic activity towards organics degradation and microbial inactivation was studied. Carbon-doped mixed-phase titania was also prepared and experimentally investigated.

Photocatalysis is an advanced oxidation process for the purification and remediation of contaminated waters and wastewaters, and is advantageous over conventional treatment technologies due to its ability to degrade emerging and recalcitrant pollutants. In addition, photocatalytic disinfection is less chemical-intensive than other methods such as chlorination, and can inactivate even highly resistant microorganisms with good efficacy. Process sustainability and cost-effectiveness may be improved by utilizing solar irradiation as the source of necessary photons for photocatalyst excitation. However, solar-induced activity of the traditionally-used titania is poor due to its inefficient visible light absorption, and recombination of photo-excited species is problematic. Additionally, mass transfer limitations and difficulties separating the catalyst from the post-treatment slurry hinder conversions and efficiencies obtainable in practice. In this research, various strategies were explored to address these issues using novel visible light active photocatalysts. Two classes of carbon-enhanced photocatalytic materials were studied: activated carbon adsorbent photocatalyst composites, and carbon-doped TiO2. Adsorbent photocatalyst composites based on activated carbon and plasmonic silver/silver chloride structures were synthesized, characterized, and experimentally investigated for their photocatalytic activity towards the degradation of model organic pollutants (methyl orange dye, phenol) and the inactivation of a model microorganism (Escherichia coli K-12) under visible light. The adsorptive behaviour of the composites towards methyl orange dye was also studied and described according to appropriate models. Photocatalytic bacterial inactivation induced by the prepared composites was investigated, and the inactivation mechanisms and roles of incorporated antimicrobial silver on disinfection were probed and discussed. These composites were extended towards magnetic removal strategies for post-use separation through the incorporation of magnetic nanoparticles to prepare Ag/AgCl-magnetic activated carbon composites, and the effect of nanoparticles addition on the properties and photoactivities of the resulting materials was explored. Another silver/silver halide adsorbent photocatalyst composite based on activated carbon and Ag/AgBr exhibiting visible light absorption due to both localized surface plasmon resonance and optical band gap absorption was synthesized and its photocatalytic activity towards organics degradation and microbial inactivation was studied. Carbon-doped mixed-phase titania was also prepared and experimentally investigated.

No description available.

Ce travail de thèse expérimentale a été consacré à la synthèse par des méthodes de chimie par voie humide de nanoparticules à base du multiferroïque BiFeO3 et à leur caractérisation, avec comme objectif finale des applications photocatalytiques. Ce matériau présente une bande interdite, avec un gap de 2.6eV, qui permet la photo-génération de porteurs de charges dans le visible faisant ainsi de BiFeO3 un système intéressant pour des processus photo-induits. Ce travail s’est en particulier focalisé à caractériser les propriétés de nanoparticules à base de BiFeO3 en vue de comprendre l’effet de ses propriétés sur leur potentiel dans des applications liées à la photocatalyse. Tout d’abord, l’étude des effets de taille sur les propriétés structurales, de transitions de phase, et physico-chimiques des particules a été réalisée, en gardant comme principal objectif de découpler les propriétés liées à la surface de celles du massif/cœur de la particule. Pour cela, une maîtrise et une optimisation des procédés de synthèse de particules aux échelles nano- et micro-micrométriques de BiFeO3 a été nécessaire pour obtenir des composés de taille variable et de très bonne qualité cristalline. Malgré la diminution de la taille des particules, on constate que, grâce au contrôle de paramètres de synthèse, nos nanoparticules présentent des propriétés très proches à celles du massif de BiFeO3, gardant la structure rhomboédrique R3c avec des faibles effets de contrainte. Afin de contrôler indirectement par le dopage les propriétés optiques des composés à base de BiFeO3, on a réussi à réaliser un dopage très homogène en La3+, et un dopage partiel en Ca2+, sur le site de Bi3+. Les propriétés optiques des nanoparticules et leurs applications dans les premières expériences photocatalytiques sur la dégradation du colorant rhodamine B ont montré la complexité de la physico-chimie de leur surface et du processus d’interaction lumière-particule. Après analyse des données d’absorbance optique en fonction de la taille de nanoparticules, on observe que la bande interdite déduite pour ces différentes particules n’est pas le facteur prédominant sur les performances photocatalytiques. D’autres facteurs ont pu être identifiés comme étant à l’origine de la localisation de charges photo-générées, tels que des états de surface liés à une fine couche de peau ou skin layer sur les nanoparticules, présentant des défauts structuraux, une réduction de l’état d’oxydation du Fe3+ vers le Fe2+ et la stabilisation d’autres adsorbats, tels que FeOOH ; tous ces facteurs peuvent contribuer au changement dans les performances photocatalytiques. Les résultats photocatalytiques restent très encourageants pour poursuivre les études de nanoparticules à base de BiFeO3, montrant une dégradation de la rhodamine B à 50% au bout de 4h de réaction photocatalytique pour certaines des nanoparticules étudiées. / This experimental PhD work has been dedicated to the synthesis, by wet chemistry methods, and characterization of nanoparticles based on multiferroic BiFeO3, with the aim of using them for photocatalytic applications. This material presents a bandgap of 2.6eV, which allows the charge carrier photoexcitation in the visible range, making BiFeO3 a very interesting system for photoinduced processes. This thesis has been particularly focused on characterizing the properties of BiFeO3 nanoparticles in view of understanding the relationship of their properties on their potential use for photocatalytic applications. First of all, the topic of the size effect on the structural properties, phase transitions, and physics and chemistry of the particles has been developed, keeping as first aim to separate the properties related to the surface from those arising from the bulk/core of the particle. To do so, the mastering and optimization of the synthesis processes of BiFeO3 particles at the nano and microscale were needed, to finally obtain different size compounds with high crystalline quality. Despite the size reduction of the particles, we notice that, thanks to the control of the synthesis process, our BiFeO3 nanoparticles present properties very close to those of the bulk BiFeO3 material, keeping the rhombohedral structure R3c with weak strain effects. In order to indirectly tune the optical properties exploiting the doping, we have succeeded in realizing a homogenous La3+ doping, and a partial Ca2+ doping, on the Bi3+ site. The optical properties of the nanoparticles and their use on the first photocatalytic experiments for degrading rhodamine B dye have shown the complexity of the physics and chemistry phenomena at their surface and of the light-particle processes. After analyzing optical absorbance data as a function of the particle size, we observe that the deduced bandgap for different particles is not the main parameter directing the photocatalytic performances. Other factors have been identified to be at the origin of the localization of the photoexcited charges, as the surface states linked to the skin layer of the nanoparticles, depicting structural defects, a reduction of the oxidation state of Fe3+ towards Fe2+ and the stabilization of other adsorbates, such as FeOOH; all these parameters may contribute to the change on the photocatalytic performances. The photocatalytic results are very encouraging, motivating to continue the study of BiFeO3 based nanoparticles, though depicting a 50% rhodamine B degradation after 4h of photocatalytic reaction using some of the present nanoparticles.