The task of the master’s thesis is a study focused on re-use and process wastewater in the company Kostelecké uzeniny a.s. The thesis contains a description of wastewater treatment plants, sewage flow and metabolic load on each water treatment processes. The thesis describes the limit requirements for technological processes within the enterprise. Few variants of the use of alternative water sources for technological processes on the basis of health conditions that has been designed for treating waste water from truck wash were considered in the thesis. Treated waste water is being re-used within the truck wash. Part of the proposal is also economic calculation and evaluation of return on investment.

In South Africa, being the second largest global coal exporter, coal mining plays a pivotal role in the growth of our economy, as well as supplying our nation’s ever increasing electricity needs; while also accounting for more than 10% of the 20 x 109 m3 water used annually in the country. Coal mining may thus be classified as a large-scale water user; known to inevitably generate wastewater [acid mine drainage (AMD)] and other waste material, including fly ash (FA). Current and conventional AMD treatment technologies include precipitation–aggregation (coagulation/flocculation) – settling as hydroxides or insoluble salts. The process stream resulting from these precipitation processes is still highly saline, therefore has to undergo secondary treatment. The best available desalination techniques include reverse osmosis (RO), electro dialysis (ED), ion exchange and evaporation. All available treatment methods associated with raw AMD and its derived process stream fall prey to numerous drawbacks. The result is that treatment is just as costly as the actual coal extraction. In addition, remediation only slows the problem down, while also having a short lifespan. Research conducted into converting fly ash, an otherwise waste material, into a marketable commodity has shown that direct mixing of known ratios of FA with AMD to a pre-determined pH, erves a dual purpose: the two wastes (AMD and FA) could be neutralized and produced a much cleaner water (secondary co-disposal [FA/AMD]-process water), broadly comparable to the process water derived from precipitation-aggregation treated AMD. The collected post process solid residues on the other hand, could be used for production of high capacity ion exchange material (e.g. zeolite A, faujasite, zeolite P, etc.). The produced ion exchange material can subsequently be utilized for the attenuation of metal species in neutralized FA/AMDprocess waters. / Magister Scientiae - MSc

Det här projektet har varit på uppdrag av Kalmar Energi AB och har utförts på kraftvärmeanläggningen Moskogen. Projektet syftade till att undersöka om återvinning av rökgaskondensat till spädvatten var möjlig och ekonomiskt försvarbart. Denna åtgärd skulle potentiellt kunna minska anläggningens råvattenkonsumtion och det skulle leda till en ekonomisk besparing. Åtgärden skulle även bidra till att anläggningen blev mer självförsörjande och mindre känslig vid störningar på det lokala råvattennätet. Mätningar av flöden på rökgaskondensatsproduktionen, halter av föroreningar och råvattenkonsumtionen gav viktiga parametrar för kontakt med leverantör av reningssystem. Samarbete upprättades med Eurowater AB där två olika reningsanläggningar togs fram och delgavs Kalmar Energi AB. Kostnaden för de två olika förslagen och respektive råvattenbesparing gav två avskrivningstider för investeringarna. Slutsatsen som drogs av projektet var att en installation av en reningsanläggning för återvinning av rökgaskondensatet var möjlig. / This project has been commissioned by Kalmar Energi AB and has been carried out at the CHP plant Moskogen. The project aimed to investigate whether recycling of flue gas condensate was possible and economically justifiable. This measure could potentially reduce the plant´s raw water consumption and would result in economic savings. The measure would also help the plant become more self-sufficient and less sensitive to disturbances on the local raw water distribution net.  Measurements of the flow of flue gas condensate, levels of pollution and raw water consumption gave important parameters for contact with the purification supplier. We entered a collaboration with Eurowater AB where two different purification plants were presented to Kalmar Energi AB. The cost of the two different proposals and their respective raw water savings gave two different payback periods in which the initial investment would be recouped by the client. The conclusion drawn from the project is that the installation of a purification plant for recycling of flue gas condensate was possible.

The diploma thesis is focused on rainwater reuse in the sports and cultural center and elaboration of project sanitary equipment installation. The theoretical part of the thesis is focused on performance issues rainwater reuse in the buildings. In another part of thesis are drawn calculations with three variants of the design volume storage reservoir for rain water. The drawings are part of the project.

Småskaliga processindustrier är små industrier som genom ett småskaligt, hantverksmässigt eller lokalt förhållningssätt förädlar råvaror genom olika automatiserade processer. Vid förädlingen uppkommer stora mängder processavloppsvatten med stor organisk belastning som måste tas om hand på ett hållbart, resurseffektivt och miljömässigt sätt för att inte skada människa eller miljö. I denna studie undersöktes kvaliteten på processavloppsvatten från småskaliga slakterier, mejerier och bryggerier, samt hur hanteringen av processavloppsvattnet från dessa processindustrier ser ut i Sverige idag. Ytterligare utreddes hur reningstekniker för små avlopp kan användas för rening av processavloppsvatten från småskalig processindustri samt hur marknaden för användande av tekniker för små avlopp för rening av processavloppsvatten ser ut. Studien använde ett flertal metoder, litteraturstudie av småskaliga processindustrier och små avlopp, intervjuer och enkätundersökning av småskaliga slakterier, mejerier och bryggerier, samt intervjuer med tillverkare för tekniker för små avlopp. Resultatet visade att kvaliteten på processavloppsvattnet inte kunde redovisas för majoriteten av processindustrierna från intervjuer och enkätundersökning eftersom kvalitetsanalyser inte alltid verkar ske på processavloppsvattnet, varken före eller efter rening. Litteraturen beskrev vidare att prioriterade parametrar att rena för slakterier, mejerier och bryggerier främst är organiska ämnen (mätt som BOD eller COD), suspenderade ämnen, kväve, fosfor, samt pH. Dessa parametrar varierar mellan de olika typerna av processindustrierna och inom samma typ av processindustri. Variationerna anses utgöra en utmaning att hitta passande reningstekniker som fungerar i alla sammanhang. Angående vilka reningstekniker och avloppslösningar som används av småskaliga processindustrier visade resultatet att en stor andel av processindustrierna har intern rening, och knappt en tredjedel har anslutning till kommunalt avloppsnät. Processindustrier med intern rening vars processavloppsvatten dimensionerades till mindre än 100 personekvivalenter använder till övervägande del tekniker för rening av små avlopp, men andra avloppslösningar såsom gödselbrunn, reningsverk och biogasanläggning förekom även för större avloppsdimensioner. Reningstekniker för små avlopp för rening av processavloppsvatten, samt anpassade tekniker för processavloppsvatten, erbjuds till viss grad på dagens marknad men det finns fortfarande utmaningar för att kunna tillhandahålla lösningar för fler typer av processindustrier. Möjlighet att utjämna avloppsflöden och lösningar med större belastningskapacitet är fortfarande något som behöver utvecklas vidare. / Small-scale process industries are small, sometimes locally or artisanal, industries that produces their product through processing raw materials by using automated processes. Large volumes of wastewater effluent are produced by doing this, and this wastewater is characterized by high organic load and nutrients which must be treated in a sustainable way to not be harmful to humans nor the environment. This study evaluated industrial wastewater treatment from small-scale slaughterhouses, dairies and breweries, including wastewater characteristics of these types of process industries in Sweden today. The study also included an evaluation of decentralized wastewater treatment systems for small-scale industrial wastewater treatment and what the Swedish market can provide regarding small-scale industrial wastewater treatments. Different methods were used to reach this goal; a literature study regarding wastewater characteristics and treatment of industrial wastewater and decentralized wastewater treatment systems, interviews, and surveys of Swedish small-scale process industries, and finally interviews with manufacturers of decentralized wastewater treatment systems. The result showed that wastewater characteristics was not accessible from most of the Swedish small-scale process industries. They mostly do not analyze their wastewater neither before nor after wastewater treatment. Furthermore, it was described that highpriority wastewater characteristics for treatment according to the literature was BOD, COD, suspended solids, nitrogen, phosphorus, and pH. Variations of these characteristics is common both between different types of process industries and in the same type of industry. These variations are challenging in regard to finding suitable wastewater treatment techniques that is adequate in every situation. Wastewater treatment systems used today are mostly local at the site, it is around a third that have connection to municipal wastewater facilities. The most common local wastewater treatment for small process industries (less than 100 population equivalents) is decentralized wastewater treatment systems according to the interviews and surveys. Other wastewater treatments such as dung pits, wastewater treatment plants and biogas plants were also used for larger process industries. Decentralized wastewater treatment systems for industrial wastewater treatment and adapted small-scale industrial wastewater treatments can be found to some extent on the Swedish market today, but there are still some challenges to provide small-scale industrial wastewater treatment for every type of process industry. Solutions to level out intense wastewater flows and capacity to receive high effluent loads need to be further developed.

Diploma thesis describes the design of plumbing systems in student dormitories. The theoretical part discusses the types of waste water, focusing on gray water and its subsequent use. The experimental part is focused on measurement drinking water consumption and drinking water discharge in existing buildings student dormitories and apartment building. The work also contains other variants of possible installation solutions. The project is part of the selected solutions developed a variant form of project documentation for construction.

Diploma thesis contains a design the plumbing and gas installations in the industrial building. The theoretical part deals with the use of rainwater in the building as the process water and the experimental determination of the flow rate and water needs for the manufacturing and storage hall with built-office. The calculation part deals with the design of variants of plumbing and gas installations in the building manufacturing and storage hall with built-office. The practical part contains a design and project documentation of selected variants plumbing and gas installations in the manufacturing and storage hall with built-office, and the use of rainwater in this type of building.