abstract: The heat and mass transfer phenomena in micro-scale for the mass transfer phenomena on drug in cylindrical matrix system, the simulation of oxygen/drug diffusion in a three dimensional capillary network, and a reduced chemical kinetic modeling of gas turbine combustion for Jet propellant-10 have been studied numerically. For the numerical analysis of the mass transfer phenomena on drug in cylindrical matrix system, the governing equations are derived from the cylindrical matrix systems, Krogh cylinder model, which modeling system is comprised of a capillary to a surrounding cylinder tissue along with the arterial distance to veins. ADI (Alternative Direction Implicit) scheme and Thomas algorithm are applied to solve the nonlinear partial differential equations (PDEs). This study shows that the important factors which have an effect on the drug penetration depth to the tissue are the mass diffusivity and the consumption of relevant species during the time allowed for diffusion to the brain tissue. Also, a computational fluid dynamics (CFD) model has been developed to simulate the blood flow and oxygen/drug diffusion in a three dimensional capillary network, which are satisfied in the physiological range of a typical capillary. A three dimensional geometry has been constructed to replicate the one studied by Secomb et al. (2000), and the computational framework features a non-Newtonian viscosity model for blood, the oxygen transport model including in oxygen-hemoglobin dissociation and wall flux due to tissue absorption, as well as an ability to study the diffusion of drugs and other materials in the capillary streams. Finally, a chemical kinetic mechanism of JP-10 has been compiled and validated for a wide range of combustion regimes, covering pressures of 1atm to 40atm with temperature ranges of 1,200 K - 1,700 K, which is being studied as a possible Jet propellant for the Pulse Detonation Engine (PDE) and other high-speed flight applications such as hypersonic missiles. The comprehensive skeletal mechanism consists of 58 species and 315 reactions including in CPD, Benzene formation process by the theory for polycyclic aromatic hydrocarbons (PAH) and soot formation process on the constant volume combustor, premixed flame characteristics. / Dissertation/Thesis / Ph.D. Aerospace Engineering 2012

Orientador: Nelson Henrique Morgon / Dissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Quimica / Made available in DSpace on 2018-08-04T16:59:18Z (GMT). No. of bitstreams: 1 Silva_MauricioChagasda_M.pdf: 1448929 bytes, checksum: 5e8a626133912c0e72a209eeccbbfd34 (MD5) Previous issue date: 2005 / Mestrado / Físico-Química / Mestre em Química

The main focus of the current dissertation thesis is research of gold catalyzed reactions. I was using mass spectrometry as the primary research technique. I complemented the results with infrared multiphoton dissociation spectroscopy, nuclear magnetic resonance spectroscopy and quantum chemical calculations. I have investigated the interaction of the gold(I) cation with unsaturated hydrocarbons in the first part of my thesis. Secondly, I have studied gold(I) or silver(I) affinity to gold acetylides. In the last part, I have investigated the reaction mechanism of a gold mediated addition of methanol to alkynes. I found out that the gold(I) cation interacts stronger with gold acetylides than with nonactivated triple CC bonds. I showed that the complexes containing two gold atoms represent the key intermediates in the mechanism of addition of methanol to alkynes and that the ligand on the gold catalyst plays a fundamental role in the determination of the mechanism. Powered by TCPDF (www.tcpdf.org)

The chemical evolution with respect to time of complex macroscopic mixtures such as interstellar clouds and Titan’s atmosphere is governed via a mutual competition between thousands of simultaneous processes, including thousands of chemical reactions. Chemical kinetic modeling, which attempts to understand their macroscopic observables as well as their overall reaction mechanism through a detailed understanding of their microscopic reactions and processes, thus require thousands of rate coefficients and product distributions. At present, however, just a small fraction of these have been well-studied and measured; in addition, at the relevant low temperatures, such information becomes even more scarce. Due to the recent developments in both theoretical kinetics as well as in ab initio electronic structure calculations, it is now possible to predict accurate reaction rate coefficients and product distributions from first-principles at various temperatures, often in less time, than through the running of an experiment. Here, the results of a first principles theoretical investigation into both the reaction rate coefficients as well as the final product distributions for the reactions between the ground state CH radical (X2Π) and various C1-C3 hydrocarbons is presented; together, these constitute a set of reactions important to modeling efforts relevant to mixtures such as interstellar clouds and Titan’s atmosphere.

No description available.

京都大学 / 新制・課程博士 / 博士(人間・環境学) / 甲第23286号 / 人博第1001号 / 新制||人||236(附属図書館) / 2020||人博||1001(吉田南総合図書館) / 京都大学大学院人間・環境学研究科相関環境学専攻 / (主査)教授 内本 喜晴, 教授 田部 勢津久, 教授 高木 紀明 / 学位規則第4条第1項該当 / Doctor of Human and Environmental Studies / Kyoto University / DFAM

京都大学 / 新制・課程博士 / 博士(人間・環境学) / 甲第23288号 / 人博第1003号 / 新制||人||236(附属図書館) / 2020||人博||1003(吉田南総合図書館) / 京都大学大学院人間・環境学研究科相関環境学専攻 / (主査)教授 内本 喜晴, 教授 高木 紀明, 教授 中村 敏浩 / 学位規則第4条第1項該当 / Doctor of Human and Environmental Studies / Kyoto University / DFAM

The lack of catalytic efficiency towards the complete ethanol oxidation reaction (EOR) has hindered the development of direct ethanol fuel cells (DEFCs). Ir-based catalysts have recently been shown promise in the complete EOR. However, the reaction mechanism of the complete EOR remains unclear, which impedes the development of better Ir-based catalysts. Herein, we performed extensive density functional theory (DFT) calculations to develop a comprehensive reaction network of EOR on Ir(100). The EOR process consists of four dehydrogenation steps of ethanol leading to the generation of CH2CO species followed by two competitive reaction pathways, i.e., a C-O bond cleavage to poisoning species (e.g., CHC) and the surface diffusion of CH2CO leading to CO2. Furthermore, our studies show that for all CHxCOy (x = 1, 2, or 3 and y = 0 or 1) species, only when the C and O atoms (or two C atoms) bind to two different surface Ir atoms can the C-C/C-O bond cleavage occur. This work highlights the essential roles of adsorption structure and diffusion of CH2CO for the complete EOR and serves as a benchmark for the future investigation of the electronic and solvent effects.Pt-Ir-based alloy electrocatalysts have shown encouraging catalytic performance on the EOR in direct ethanol fuel cells. Nevertheless, designing a suitably qualified EOR electrocatalyst remains challenging because of several convoluted factors (e.g., C1 species poisoning, acetate acid formation, and C-C bond splitting). To understand the relationship between the EOR performance and the type of catalysts, we model three kinds of (100)-exposed Pt-Ir layered catalysts and perform density functional theory (DFT) calculations to explore 58 elementary reactions of the EOR over three catalyst surfaces. According to the calculated activation energies and reaction energies, we mapped out the reaction mechanisms for EOR on different catalysts, indicating corresponding rate-limiting steps (RLSs) of the complete EOR. We demonstrated that the C-O coupling/decoupling ability of the catalyst surface plays a leading role in the overall EOR performance because a perfect complete EOR not only has to avoid some C-O coupling reactions (e.g., CH¬3CO+OH→CH3COOH) but also needs to promote some C-O coupling reactions (e.g., CO+O→CO2). We further illustrated that Pt and Ir exhibit excellent C-O coupling and decoupling abilities, respectively, implying that modifying the compositions and structures of Pt-Ir catalysts is a promising way to achieve the complete EOR. Furthermore, the Ir@Pt(100) surface (Ir monolayer over Pt(100) surface) with a Pt-doped active site possesses the most significant potential on EOR, which could impede the acetate acid formation and facilitate the CO2 formation simultaneously. This work highlights the role of tuning the C-O coupling/decoupling ability of electrocatalyst in EOR activity, providing a new strategy for designing and selecting the EOR electrocatalyst. The solvent effect has always been a non-negligible factor for aqueous reactions. In computational chemistry, researchers have been looking for a compromise between computational efficiency and the rationality of solvent models to mimic the solvent environment. In this work, I investigated the ethanol dehydrogenation and C-C bond cleavages of EOR over Ir(100)using both implicit and explicit solvation models. The implicit model exhibited little impact on the adsorbates without the hydroxyl group, whereas the explicit model can reasonably describe the system’s hydrogen bonding and van der Waals interaction. This solvent effect study showed how different solvent models affected the elementary reactions geometrically and energetically.

Microfluidic flow devices coupled with quantitative Raman spectroscopy are able to provide a deep insight into the reaction mechanism and kinetics of electrocatalytic reactions. With a microfluidic flow device made with glass microscope slides and polymer building blocks, the feasibility of this technique was examined by methanol electrooxidation reaction with a Pt working electrode. Pre-calibration of the Raman peak area was done with solutions of known concentrations of methanol and its major oxidation product, i.e., formate, which enabled the time-dependent Raman spectra taken during the reaction to be converted to time-dependent concentrations. These were interpreted in terms of a model with one-dimensional convection and the reaction kinetics. An improved version of this technique was then applied to a comparative study of different alcohols with Ni-based electrodes. This showed the production of formate as the major product from the oxidation of alcohols with vicinal OH groups, leading to the discovery that C-C bond dissociation is a major reaction pathway for vicinal diols and triols if Ni electrocatalysts are used. It is also suggested that the cleavage of C-C bonds is the rate-determining step. The potential use of printed circuit boards (PCB) in the next generation of a novel microfluidic device was explored, as PCB have advantages over regular electrochemical microfluidic substrates, such as simpler electrode fabrication strategies, more wiring layers, and customization of size and shape of electrodes. Pretreatments and electrodeposition protocols of nickel, silver, palladium and platinum on PCB were successfully developed, together with four types of PCB-based microfluidic devices designed with an open-source PCB design software. This work establishes a new electrochemical microfluidic platform for online and in-situ monitoring of electrocatalytic reactions, which can quickly determine the reaction mechanism and kinetics. / Graduate

Cyclopropyl-containing substrates have been frequently utilized as "probes" for the detection of SET pathways in organic and biorganic systems. These reactions are based on the cyclorpropylcarbinyl → homoallyl rearrangement, which is fast and essentially irreversible. The implicit assumption in such studies is that if a "radical" species is produced, it will undergo ring opening. We have found that there are two important factors to consider in the design of SET probes: 1) ring strain, the thermodynamic driving force for the rearrangement, and 2) resonance energy, which may help or hinder rearrangement, depending on the specific system. Delocalization of spin and charge were found to be important factors pertaining to substituent effects on the rates of radical anion rearrangements. Previous studies from our lab have centered on highly conjugated phenyl cyclopropyl ketones. This work considers a series of compounds varying in their conjugative components from a highly conjugated spiro[2.5]octa-4,7-dien-6-one and derivatives to simple aliphatic ketones. Utilizing cyclic, linear sweep voltammetry, and preparative electrolysis techniques, it was discovered that all substrates yielded ring opened products with rates and selectivities that will prove useful and informative in the design of mechanistic probes based on the cyclorpropylcarbinyl → homoallyl rearrangement. Rates of homogeneous electron transfer from a series of hydrocarbon mediators to substrates were measured using homogeneous catalysis techniques. Standard reduction potentials and reorganization energies of substrates were derived using Marcus theory. Conjugative interactions with the cyclopropyl group are discussed. / Ph. D.