Cette thèse porte sur l’étude expérimentale de l’extraction liquide-liquide au sein d’une colonne de laboratoire reproduisant de manière très simplifiée les appareils utilisés pour retraiter le combustible nucléaire (procédé hydro-métallurgique PUREX). Une technique optique non intrusive, dite de réfractométrie ou diffractométrie arc-en-ciel, a été spécifiquement développée pour caractériser la granulométrie (et donc l’aire interfaciale) et la composition de la phase dispersée. Cette dernière est composée de gouttes millimétriques de mélanges d’alcanes en ascension dans une colonne remplie d’eau au repos. Les spécificités de l’arc-en-ciel produit par ces gouttes à faible indice de réfraction relatif ont été étudiées à l’aide de différents modèles de diffusion asymptotiques de la lumière et la théorie électromagnétique de Lorenz-Mie. Grâce au développement de différentes approches directes et inverses (paramétriques), il a été démontré numériquement et expérimentalement que cette technique optique permettait d’estimer individuellement (ou collectivement) diamètre (moyen) et fraction de mélange de quelques dizaines de milliers de gouttes à quelques pour cents près. Des travaux préliminaires ont été réalisés sur l’extraction, résolue dans le temps de l’acétone, d’un milieu continu aqueux vers une goutte sessile composée initialement de toluène pur. Ils ont montré que l’on pouvait réellement estimer les constantes de transfert (de diffusion et de distribution moléculaire) à partir de l’analyse de l’évolution temporelle des arcs-en-ciel et en utilisant une méthode inverse qui intègre un modèle de diffusion moléculaire à symétrie radiale et un modèle électromagnétique ad hoc. / This thesis deals with the experimental study of liquid-liquid extraction within a laboratory column reproducing in a simple way the apparatuses used in a nuclear fuel reprocessing process (PUREX). A non-intrusive optical technique, called rainbow refractometry or diffractometry, has been specifically developed to characterize the size (and hence the interfacial area) and the composition of the dispersed phase. The latter is first time composed of millimeter droplets of alkanes mixtures free rising in a column filled with water at rest. Specificities of the rainbow produced by these droplets with a low relative refractive index were studied using different asymptotic light scattering models and the Lorenz-Mie electromagnetic theory. Thanks to the development of different direct and reverse (parametric) approaches, it was demonstrated both numerically and experimentally that this optical technique allows estimating individually (or collectively) the diameter (in average) and the mixing fraction of a few tens of thousands of droplets with a few percent of accuracy. Preliminary works have been carried out on the time-resolved extraction of acetone from an aqueous continuous medium to a sessile droplet initially composed of pure toluene. They have revealed that the transfer (diffusion and molecular splitting) constants can be estimated from the analysis of the temporal evolution of the rainbow signals using an inverse method that integrates a molecular diffusion model with a radial symmetry and an electromagnetic light scattering model.

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / O objetivo deste trabalho foi estabelecer um modelo empregando-se ferramentas de regressão multivariada para a previsão do teor em ésteres metílicos e, simultaneamente, de propriedades físico-químicas de misturas de óleo de soja e biodiesel de soja. O modelo foi proposto a partir da correlação das propriedades de interesse com os espectros de reflectância total atenuada no infravermelho médio das misturas. Para a determinação dos teores de ésteres metílicos foi utilizada a cromatografia líquida de alta eficiência (HPLC), podendo esta ser uma técnica alternativa aos método de referência que utilizam a cromatografia em fase gasosa (EN 14103 e EN 14105). As propriedades físico-químicas selecionadas foram índice de refração, massa específica e viscosidade. Para o estudo, foram preparadas 11 misturas com diferentes proporções de biodiesel de soja e de óleo de soja (0-100 % em massa de biodiesel de soja), em quintuplicata, totalizando 55 amostras. A região do infravermelho estudada foi a faixa de 3801 a 650 cm-1. Os espectros foram submetidos aos pré-tratamentos de correção de sinal multiplicativo (MSC) e, em seguida, à centralização na média (MC). As propriedades de interesse foram submetidas ao autoescalamento. Em seguida foi aplicada análise de componentes principais (PCA) com a finalidade de reduzir a dimensionalidade dos dados e detectar a presença de valores anômalos. Quando estes foram detectados, a amostra era descartada. Os dados originais foram submetidos ao algoritmo de Kennard-Stone dividindo-os em um conjunto de calibração, para a construção do modelo, e um conjunto de validação, para verificar a sua confiabilidade. Os resultados mostraram que o modelo proposto por PLS2 (Mínimos Quadrados Parciais) foi capaz de se ajustar bem os dados de índice de refração e de massa específica, podendo ser observado um comportamento aleatório dos erros, indicando a presença de homocedasticidade nos valores residuais, em outras palavras, o modelo construído apresentou uma capacidade de previsão para as propriedades de massa específica e índice de refração com 95% de confiança. A exatidão do modelo foi também avaliada através da estimativa dos parâmetros de regressão que são a inclinação e o intercepto pela Região Conjunta da Elipse de Confiança (EJCR). Os resultados confirmaram que o modelo MIR-PLS desenvolvido foi capaz de prever, simultaneamente, as propriedades índice de refração e massa específica. Para os teores de éteres metílicos determinados por HPLC, foi também desenvolvido um modelo MIR-PLS para correlacionar estes valores com os espectros de MIR, porém a qualidade do ajuste não foi tão boa. Apesar disso, foi possível mostrar que os dados podem ser modelados e correlacionados com os espectros de infravermelho utilizando calibração multivariada / In the present work, a model that uses multivariate regression tools was proposed to predict both contents of methyl esters and physical-chemical properties of soybean oil -soybean biodiesel blends. The model was proposed from the correlation of the properties of interest with the attenuated total reflectance infrared spectra of the samples (ATR/MID-FTIR). The composition of the blends (methyl esters content) was determined by high performance liquid chromatography (HPLC), which can be seen as an alternative technique to the standard reference methods based on gas chromatography (EN 14103 and EN 14105). The selected physicochemical properties were refractive index, density, and viscosity. For the study, 11 mixtures were prepared with different proportions of soybean biodiesel and soybean oil (0-100 % wt of soybean biodiesel) in five replications totalizing 55 samples. The infrared spectra were acquired in the range 3801-650 cm-1. The spectra were submitted to the multiplicative signal correction (MSC) and then to mean centering (MC) preprocessing. The properties of interest were submitted to auto scale. It was then applied principal component analysis (PCA) for the purpose of reducing the dimensionality of the data, and detected the presence of outliers. When the outliers were detected, the samples were discarded. The original data were submitted to Kennard-Stone algorithm dividing them into a calibration set to build the model and the validation to verify its reliability. The results showed that the model proposed by PLS2 (Partial Least Squares) was able to adjust well to the refractive index data and density, can be observed a random behavior of errors, indicating the presence of homoscedasticity in residual values, in other words, the constructed model presented a forecast of capacity for specific mass properties and refractive index with 95% confidence. The accuracy of the model was evaluated by estimating the regression parameters which are the slope and the intercept by EJCR (Joint Region Confidence Ellipse). The results confirmed that MIR-developed PLS model was able to predict both the refractive index and specific gravity properties. For contents of methyl esters via liquid chromatography the model showed a lower adjustment of the data. Nevertheless, it was possible to demonstrate that the results obtained from methyl esters by HPLC analytical method can be modeled and correlate them with infrared spectra using multivariate calibration

Sub-surface modification using a frequency doubled Ti: Sapphire femtosecond (fs) laser at 1kHz repetition rate, producing 100-fs pulse duration at 400nm, is studied in order to fabricate optical components within non-photosensitised polymethyl methacrylate (PMMA). This thesis explores the feasibility of producing three-dimensional optical devices in bulk polymers and polymer optical fibre (POF) using fs laser direct-writing techniques. For effective and optimal structuring, the laser writing parameters and focusing conditions, such as focusing depth, translation speed, and accumulated fluence are investigated by means of photo-modification thresholds; structural changes in dimensions and morphologies; and the magnitude of the refractive index modulation. The highest refractive index change is 3.2x10^(-3) achieved by using a dry (non-immersion) 0.45-NA objective for a single laser scan. Variations in damage threshold with focusing depths are attributed to a combination of material absorption or surface scattering of light due to contamination or surface imperfections, as well as oxygen diffusion and spherical aberration. Distortion of the laser-induced feature size and shape due to spherical aberrations is controlled and compensated by adjusting the laser power near the damage threshold. Permanent refractive index structures with cross-sectional dimensions of 2μm by 0.9μm and 3μm by 1.4μm are demonstrated at depths of 300μm and 500μm below the surface, resulting in the axial/ lateral ratio of 2.2 and 2.1, respectively. A novel phenomenon relevant to effects of translation speed on the fs laser modification is observed for the first time. As translation speeds reduce from 1.2 to 0.6mm/s, the optical damage threshold power decreases by 6μW, whilst other writing conditions remain constant. However, the damage threshold increases by 74μW with decreasing speeds from 0.6 to 0.35mm/s. This significant increase in threshold power enables inscription of refractive index gratings <5μm below the surface, because irradiation on the surface or near the surface initiates ablation rather than refractive index changes, and this forms a limit for writing useful structures. Compensating for this limit by using appropriate writing parameters highlights the potential of fabricating three-dimensional integrated optical circuits in thin (100μm) polymer substrates. Finally, highly localised fabrication of long period gratings into step-index single mode polymer fibres is demonstrated by removing distortion effects due to the curved surface. The distortion is compensated by sandwiching the fibre with two flat PMMA sheets, between which index-matching oil (n=1.5) is injected. This arrangement enables precise laser micro-structuring with flat interfaces and continuous inner material. The first demonstration of a 250-μm-period fibre grating, resulting in attenuation bands in the visible spectral region at 613, 633, 728, 816, 853, 877 and 900nm, is presented.

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / O objetivo deste trabalho foi estabelecer um modelo empregando-se ferramentas de regressão multivariada para a previsão do teor em ésteres metílicos e, simultaneamente, de propriedades físico-químicas de misturas de óleo de soja e biodiesel de soja. O modelo foi proposto a partir da correlação das propriedades de interesse com os espectros de reflectância total atenuada no infravermelho médio das misturas. Para a determinação dos teores de ésteres metílicos foi utilizada a cromatografia líquida de alta eficiência (HPLC), podendo esta ser uma técnica alternativa aos método de referência que utilizam a cromatografia em fase gasosa (EN 14103 e EN 14105). As propriedades físico-químicas selecionadas foram índice de refração, massa específica e viscosidade. Para o estudo, foram preparadas 11 misturas com diferentes proporções de biodiesel de soja e de óleo de soja (0-100 % em massa de biodiesel de soja), em quintuplicata, totalizando 55 amostras. A região do infravermelho estudada foi a faixa de 3801 a 650 cm-1. Os espectros foram submetidos aos pré-tratamentos de correção de sinal multiplicativo (MSC) e, em seguida, à centralização na média (MC). As propriedades de interesse foram submetidas ao autoescalamento. Em seguida foi aplicada análise de componentes principais (PCA) com a finalidade de reduzir a dimensionalidade dos dados e detectar a presença de valores anômalos. Quando estes foram detectados, a amostra era descartada. Os dados originais foram submetidos ao algoritmo de Kennard-Stone dividindo-os em um conjunto de calibração, para a construção do modelo, e um conjunto de validação, para verificar a sua confiabilidade. Os resultados mostraram que o modelo proposto por PLS2 (Mínimos Quadrados Parciais) foi capaz de se ajustar bem os dados de índice de refração e de massa específica, podendo ser observado um comportamento aleatório dos erros, indicando a presença de homocedasticidade nos valores residuais, em outras palavras, o modelo construído apresentou uma capacidade de previsão para as propriedades de massa específica e índice de refração com 95% de confiança. A exatidão do modelo foi também avaliada através da estimativa dos parâmetros de regressão que são a inclinação e o intercepto pela Região Conjunta da Elipse de Confiança (EJCR). Os resultados confirmaram que o modelo MIR-PLS desenvolvido foi capaz de prever, simultaneamente, as propriedades índice de refração e massa específica. Para os teores de éteres metílicos determinados por HPLC, foi também desenvolvido um modelo MIR-PLS para correlacionar estes valores com os espectros de MIR, porém a qualidade do ajuste não foi tão boa. Apesar disso, foi possível mostrar que os dados podem ser modelados e correlacionados com os espectros de infravermelho utilizando calibração multivariada / In the present work, a model that uses multivariate regression tools was proposed to predict both contents of methyl esters and physical-chemical properties of soybean oil -soybean biodiesel blends. The model was proposed from the correlation of the properties of interest with the attenuated total reflectance infrared spectra of the samples (ATR/MID-FTIR). The composition of the blends (methyl esters content) was determined by high performance liquid chromatography (HPLC), which can be seen as an alternative technique to the standard reference methods based on gas chromatography (EN 14103 and EN 14105). The selected physicochemical properties were refractive index, density, and viscosity. For the study, 11 mixtures were prepared with different proportions of soybean biodiesel and soybean oil (0-100 % wt of soybean biodiesel) in five replications totalizing 55 samples. The infrared spectra were acquired in the range 3801-650 cm-1. The spectra were submitted to the multiplicative signal correction (MSC) and then to mean centering (MC) preprocessing. The properties of interest were submitted to auto scale. It was then applied principal component analysis (PCA) for the purpose of reducing the dimensionality of the data, and detected the presence of outliers. When the outliers were detected, the samples were discarded. The original data were submitted to Kennard-Stone algorithm dividing them into a calibration set to build the model and the validation to verify its reliability. The results showed that the model proposed by PLS2 (Partial Least Squares) was able to adjust well to the refractive index data and density, can be observed a random behavior of errors, indicating the presence of homoscedasticity in residual values, in other words, the constructed model presented a forecast of capacity for specific mass properties and refractive index with 95% confidence. The accuracy of the model was evaluated by estimating the regression parameters which are the slope and the intercept by EJCR (Joint Region Confidence Ellipse). The results confirmed that MIR-developed PLS model was able to predict both the refractive index and specific gravity properties. For contents of methyl esters via liquid chromatography the model showed a lower adjustment of the data. Nevertheless, it was possible to demonstrate that the results obtained from methyl esters by HPLC analytical method can be modeled and correlate them with infrared spectra using multivariate calibration

Neste trabalho estudamos uma nova classe de materiais ópticos não-lineares, os cristais orgânicos, que possuem potencial para muitas aplicação em dispositivos. Determinamos diferentes propriedades ópticas lineares e não-lineares de três cristais orgânicos: a l-alanina, a l-treonina e a l-lisina. Esses cristais de aminoácido foram escolhidos por apresentarem propriedades de geração de segundo harmônico (GSH) e por serem materiais nunca estudados sob o ponto de vista da óptica não-linear. Estudamos algumas das propriedades ópticas lineares fundamentais desses cristais biaxiais transparentes, pois deles dependem os fenômenos não-lineares sobre os quais são feitas intensas pesquisas. Determinamos as propriedades lineares como os espectros de absorção, os índices de refração, os eixo ópticos, velocidade de propagação da luz num meio anisotrópico e os limiares de dano por radiação. Posteriormente, determinamos as condições de casamento de fase, a eficiência de GSH, e a auto-modulação de fase. A GSH e a auto-modulação de fase pertencem, respectivamente, a processos não-lineares de segunda e de terceira-ordem. Para o estudo de muitas dessas propriedades foram desenvolvidas novas técnicas experimentais. Uma dessas novas técnicas, a varredura-Z oscilante, teve sensibilidade para determinar, pela primeira vez, o índice de refração não oscilante, vez, o índice de refração não linear desses cristais orgânicos. Além disso, como a todos os processos de caracterização envolveram a preparação de amostras, tivemos a oportunidade de criar procedimentos padrões para manipulação e utilização desses novos materiais. / In this work we studied a new class of nonlinear organic crystals that are potential candidates for devices application. We determined several linear and nonlinear optical properties of three organic crystals: l-alanine, l-threonine and l-lysine. These aminoacid. These aminoacid because their nonlinearities were never studied before. We characterized some of the fundamental linear optical properties of these biaxial transparent crystals, because they have influence on nonlinear phenomena that attracted a lot of research. We determined linear properties like absorption spectra, indices of refraction, optical axes, the light speed propagation in anisotropy media and the optical damage threshold. Subsequently, we determined the phase-matching condition for SHG, efficiency of the SHG and self-phase modulation. The SHG and self-phase modulation belongs, respectively, to the second-order and third-order nonlinear processes. To study several of these properties we had to develop some new experimental techniques. One of them, the oscillatory Z-scan, allows enough sensibility to determine, for the first time, the nonlinear refraction index of these organic crystals. Besides, as all these optical characterization involve the preparation of the samples, we had the opportunity to establishing standard procedures for manipulation of these new materials.

Submitted by Renata Lopes (renatasil82@gmail.com) on 2017-06-27T19:15:36Z No. of bitstreams: 1 eltonsoaresdelimafilho mestrado.pdf: 10470752 bytes, checksum: b2ec80f3017bdb5b70e7d1e60f734b92 (MD5) / Approved for entry into archive by Adriana Oliveira (adriana.oliveira@ufjf.edu.br) on 2017-08-07T21:06:43Z (GMT) No. of bitstreams: 1 eltonsoaresdelimafilho mestrado.pdf: 10470752 bytes, checksum: b2ec80f3017bdb5b70e7d1e60f734b92 (MD5) / Made available in DSpace on 2017-08-07T21:06:43Z (GMT). No. of bitstreams: 1 eltonsoaresdelimafilho mestrado.pdf: 10470752 bytes, checksum: b2ec80f3017bdb5b70e7d1e60f734b92 (MD5) Previous issue date: 2009-08-07 / CAPES - Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Neste trabalho apresenta-se os princípios, a construção e o funcionamento de um aparato que realiza medidas interferométricas de atividade metabólica de microorganismos, em tempo real e de várias amostras simultaneamente. A construção do MAI1 compreende o desenvolvimento e implementação de técnicas de posicionamento das amostras, controle preciso de temperatura, bem como a aquisição e interpretação de padrões de sinais modulados de interferência óptica. Ao longo deste trabalho serão apresentados os modelos teóricos utilizados, os códigos de computador, os desenhos dos circuitos eletrônicos e da mecânica do aparato, bem como medidas realizadas com o mesmo. / This work presents the principles, construction and functioning of an apparatus wich measures the metabolic activity of microorganisms, in real time and from different samples simultaneously, using optical interferometry. The construction of MAI' required the development and implementation of techniques for positioning of samples, precision control of temperature, as well as the acquisition and interpretation of patterns of modulated optical interference signals. Along this work the theoretical models used, the computer codes, the electronic circuit drawings, and the mechanics of the apparatus, as well as measurements carried out with it, will be presented.

Le poling thermique est une technique consistant à appliquer un fort champ électrique (DC) à un substrat de verre chauffé. Après traitement, un champ électrique est figé au sein de la matrice vitreuse, brisant sa centrosymmétrie. La présence de ce champ permet d’accéder à des propriétés d’optique nonlinéaire du second ordre, habituellement interdite dans un milieu centrosymmétrique tel que le verre. En plus des propriétés d’optique nonlinéaire, la présence du champ électrique a été associée à des modifications structurelles et compositionnelles mais également à des changements de propriétés de surface. Notre objectif a été d’utiliser cette technique pour modifier les propriétés de réactivité de surface et optique de verres d’oxyde (borosilicate et borophosphate de niobium (BPN)) et de verres de chalcogénures. Après poling, les modifications structurelles ont été caractérisée par spectroscopie vibrationnelle Raman et infrarouge. L’intensité et la localisation du champ électrique ont été caractérisées par des techniques de génération de seconde harmonique (SHG) : une analyse quantitative avec les franges de Maker et une d’imagerie μSHG. Le traitement a permis d’augmenter localement la réactivité de surface du verre borosilicate. Dans les verres BPN et chalcogénures, le traitement a permis de contrôler les propriétés optiques à la fois linéaire et nonlinéaire à l’échelle micrométrique. Ces résultats permettent d’envisager l’utilisation du poling thermique pour des applications en photonique intégrée. / Thermal poling is a technique which consists in the application of a strong DC electric field to a heated glass substrate. Following the treatment, a static electric field is frozen inside the glass matrix, effectively breaking its centrosymmetry. Presence of the electric field allows for second order non-linear optical properties usually forbidden in centrosymmetric medium such as glasses. In addition to nonlinear optical properties, the presence of the electric field has been associated with structural/compositional modifications as well as surface property changes. Our objective was to use this technique to tailor surface reactivity and optical properties in oxide (borosilicate and niobium borophosphate) and chalcogenide glasses. After poling, structural modifications were investigated using Raman and infrared spectroscopy. Strength and localization of the electric field were characterized by Second Harmonic Generation (SHG) techniques: quantitative Maker fringes analysis and μSHG imaging. The treatment has successfully allowed to locally enhanced the surface reactivity of a borosilicate glass. In niobium borophosphate and chalcogenide glasses, the treatment has permitted to control optical properties both linearly and non-linearly at the micrometric scale. These results show that thermal poling could be used to create functional devices for applications in integrated photonics.

In der medizinischen Diagnostik, Bioverfahrenstechnik und Umwelttechnik besteht ein steigender Bedarf an kompakten Analysegeräten für die schnelle Vor-Ort-Detektion spezifischer biochemischer Substanzen. Im Rahmen der Arbeit wurde daher ein neuartiger faseroptischer Sensor entwickelt, der in der Lage ist kleinste Brechzahländerungen, z.B. durch molekulare Bindungsprozesse, zu detektieren. Die hohe Empfindlichkeit an der vergoldeten Spitze der Sensorfaser beruht auf der Oberflächenplasmonenresonanz (SPR) einer einzelnen Mantelmode, die durch ein langperiodisches Fasergitter (LPG) ermöglicht wird. Die Übertragungsfunktion des Sensors wurde unter Verwendung eines Schichtwellenleitermodells schnell und präzise modelliert. Es konnte gezeigt werden, dass in einem wässrigen Umgebungsmedium die höchste Empfindlichkeit im Spektralbereich um 660 nm unter Annahme einer rund 35~nm dicken und 2~mm langen Goldbeschichtung erreicht wird. Weiterhin wurde nachgewiesen, dass mit einer intermediale Schicht aus Cadmiumsulfid die SPR der Mantelmode in einen höheren Spektralbereich verschoben und damit die Empfindlichkeit deutlich verbessert werden kann. Um eine geringe Polarisationsabhängigkeit des Sensors sicherzustellen, wurde ein nasschemisches Abscheidungsverfahren für die allseitige Goldbeschichtung der Sensorfaser entwickelt. Die spezifischen optischen Eigenschaften dieser Abscheidungen wurden mit Hilfe von LPGs untersucht, die durch eine spezielle UV-Belichtung hergestellt wurden. Die Experimente ergaben, dass die komplexe Permittivität nasschemischer Abscheidungen mit Schichtdicken oberhalb von 50~nm mit aufgedampften Goldschichten vergleichbar ist. Die Verluste der adressierten Mantelmoden wurden mit einer äquivalenten Sensoranordnung aus zwei identischen LPG untersucht. Dabei konnte ein Skalierfaktor abgeleitet werden, der die effiziente Berechnung der Mantelmodendämpfung erlaubt. Es wurde nachgewiesen, dass die Brechzahlauflösung etablierter volumenoptischer SPR-Sensoren mit einer einfachen Transmissionsmessung an einer geeigneten Wellenlänge erreicht werden kann. Die äußerst kompakte Sensorfläche des faseroptischen Sensors ermöglicht darüber hinaus die Untersuchung deutlich kleinerer Probenvolumina ohne ein zusätzliches mikrofluidisches System zu benötigen. Es wurde gezeigt, dass sekundäre Brechzahländerungen aufgrund von Temperaturschwankungen oder unspezifische Ablagerungen durch eine differentielle Auswertung zweier identischer Sensoren kompensiert werden können. Die verbleibende Querempfindlichkeit wird durch die Polarisationsabhängigkeit der Sensoren bestimmt. Die geringste Querempfindlichkeit konnte daher mit einer homogenen nasschemischen abgeschiedenen Sensorfläche nachgewiesen werden. / Compact analysis devices which facilitate the rapid detection of specific biochemical substances are in increasing demand in the fields of point-of-care medical diagnostics, bioprocess engineering and environmental engineering. The aim of this work was therefore to design a novel fiber-optic sensor able to detect small refractive index changes such as those caused by molecular binding processes. The high level of sensitivity at the gold-plated tip of the sensor fiber stems from the surface plasmon resonance (SPR) of a single cladding mode, which is the result of a long-period fiber grating (LPG). The transfer function of the sensor was calculated quickly and accurately using a slab waveguide model. It was observed that the highest level of sensitivity in an aqueous ambient medium is achieved at a wavelength of 660 nm assuming a gold coating of 35 nm in thickness and 2 mm in length. Furthermore, it was demonstrated that an intermedial cadmium sulfide layer shifts the SPR of the cladding mode towards higher wavelengths, thus leading to significantly enhanced sensitivity. An electroless plating process for the omnidirectional deposition of gold on the sensor fiber was developed in order to minimize the sensor\'s dependency on polarization. The specific optical properties of the gold layer deposited were investigated with the aid of LPGs fabricated using a special UV exposure method. The experiments showed the complex permittivity of electroless platings with a thickness of over 50 nm to be comparable with that of evaporated gold layers. The losses of the addressed cladding modes were investigated using an equivalent sensor setup consisting of two identical LPGs. This facilitated the determination of a scaling factor enabling the effcient calculation of cladding mode attenuation. It was demonstrated that it is possible to obtain the refractive index resolution of established volume optical SPR sensors with the aid of simple transmission measurements at a specific wavelength. Moreover, the extremely compact sensing area of the fiber-optic sensor enables the investigation of smaller sample volumes without the need for an additional microfluidic system. Secondary refractive index changes caused by temperature fluctuations or unspecific binding events can be compensated for by means of the differential interrogation of two identical fiber-optic sensors. The residual cross sensitivity is determined by the polarisation dependency of the sensor. The lowest cross sensitivity was therefore demonstrated in combination with a homogeneous electroless plated sensor surface.

Magister Scientiae - MSc / Technological advancement has created a market for large area electronics such as solar cells and thin film transistors (TFT’s). Such devices now play an important role in modern society. Various types of conducting, semiconducting and insulating thin films of the order of hundreds, or even tens of nanometres are combined in strata to form stacks to create interactions and phenomena that can be exploited and employed in these devices for the benefit of mankind. One such is for the generation of energy via photovoltaic devices that use thin film technology; these are known as second and third generation solar cells. Silicon and its alloys such as silicon germanium (SiGex), silicon oxide (SiOx), silicon carbide (SiCx) and silicon nitride (SiNx) play an important role in these devices due to the fact that each material in its different structures, whether amorphous, micro or nano-crystalline or completely crystalline, has its own range of unique optical, mechanical and electrical properties. These structures and their material properties can thus exert a huge influence over the overall device performance. viii Chemical vapour deposition (CVD) techniques are most widely used in industry to obtain thin films of silicon and silicon alloys. Source gases are decomposed by the external provision of energy thereby allowing for the growth of a thin solid film on a substrate. In this study a variant of CVD, namely Hot Wire Chemical Vapour Deposition (HWCVD) will be used to deposit thin films of silicon nitride by the decomposition of silane (SiH4), hydrogen (H2) and ammonia (NH3) on a hot tantalum filament (~1600 C). Hydrogenated amorphous silicon nitride (a-SiNx:H) has great potential for application in optoelectronic devices. In commercial solar cell production its potential for use as anti-reflection coatings are due to its intermediate refractive index combined with low light absorption. An additional benefit is the passivation of interface and crystal defects due to the bonded hydrogen. This can lead to better photon conversion efficiency. Its optical properties including optical band gap, Urbach tail, and wavelength-dependent optical constants such as absorption coefficient and refractive index are crucial for the design and application in the relevant optoelectronic device. The final firing step in the production of micro-crystalline silicon solar cells, allows hydrogen to effuse into the solar cell from the a-SiNx:H, and drives bulk passivation of the grain boundaries. We therefore propose the exploration of annealing effects on the thin film structure. The study undertakes a comparison of optical and bonding structure of the as deposited thin film compared to that of the annealed thin film which would have undergone changes due to high temperature annealing under vacuum. However, it is difficult to simultaneously obtain all of these important ix optical parameters for a-SiNx:H thin films. Ultraviolet visible (UV-vis) spectroscopy will be the method of choice to investigate the optical properties. Infrared (IR) spectroscopy is a source of useful information on the microstructure of the material. In particular, the local atomic bonding configurations involving Si, N, and H atoms in a-SiNx:H films can be obtained by Fourier Transform Infrared Spectroscopy (FTIR). Therefore, this study will attempt to establish a relationship between film microstructure of a-SiNx:H thin films and their macroscopic optical properties.

The manipulation of electromagnetic radiation via the use of periodic arrays of sub-wavelength metallic structures (unit cells), nowadays named "metamaterials", has been known of in the microwave engineering community for over fifty years. In the last decade interest in such sub-wavelength structures grew, mainly due to their ability to interact with radiation in ways natural materials could not e.g. by producing a negative refractive index (NRI). This project sought to see whether NRI metamaterials could provide benefits to the mm and sub-mm wavelength astronomical instrumentation currently in use. To aid rapid design and optimisation of devices made from a cascaded set of metamaterial unit cells, a hybridised Transmission Line (TL) model was developed where the matrix components used in the TL model were "seeded" with data taken from a Finite Element Method (FEM) model of a simpler structure. A comparison between the two found that the TL model was capable of providing results that differed from the FEM model by no more than ~10E−4 for the transmitted intensity, |S21|^2, and <1° for transmitted phase, arg(S21). A slab of material with a refractive index, n = −1, can exhibit an effect known as "superlensing". A three unit cell thick NRI slab was designed, manufactured and experimentally tested. It was found to be capable of producing an NRI across a fractional band of at least 21%, producing a refractive index value of n = −1 at around 90 GHz. The experimental and simulated transmission and reflection data show good match with each other. A highly birefringent air gap Half Wave Plate (HWP) was designed, manufactured and experimentally tested. Defining its useful bandwidth as the region where the phase difference, is equal to (−180 ± 3)° a single HWP had a fractional bandwidth of 0.3%. The bandwidth was extended by using the Pancharatnam method, developed in the 1950's to produce highly achromatic optical wave plates. The method however is applicable to other frequencies and polarisation control technologies. Optimising a three HWP TL-based Pancharatnam model, the HWP's modelled fractional bandwidth increased to 6.6%. Experimental data agrees with the model showing a plateauing of the phase difference at −180°. A highly birefringent polypropylene embedded Quarter Wave Plate (QWP) was also designed, manufactured and tested. Defining its useful bandwidth as the region where the differential phase is (90 ± 2)° a single QWP produced a fractional bandwidth of 0.6%. By optimising a four QWP TL-based Pancharatnam model, the QWP's performance was improved to 7.8%. Experimental data, whilst not in complete agreement with the model does show a reduction in the gradient of phase difference where it crossed 90°. It was found that current designs for NRI metamaterials fall short of the standards required to be used in quasi-optical astronomical instrumentation due to high dispersion and absorption. The high dispersion limits NRI metamaterials to uses in instruments built for narrowband applications. Whilst the Pancharatnam method can increase bandwidths where a flat differential phase response is required, this comes at the cost of increased absorption. To reach their full potential, NRI metamaterials' lossiness must be reduced e.g. possibly by cryogenic means or the use of "active" metamaterials.