Global ETD Search

1	Assessing the potential of fuel saving and emissions reduction of the bus rapid transit system in Curitiba, Brazil Dreier, Dennis January 2015 (has links) The transport sector contributes significantly to global energy use and emissions due to its traditional dependency on fossil fuels. Climate change, security of energy supply and increasing mobility demand is mobilising governments around the challenges of sustainable transport. Immediate opportunities to reduce emissions exist through the adoption of new bus technologies, e.g. advanced powertrains. This thesis analysed energy use and carbon dioxide (CO2) emissions of conventional, hybrid-electric, and plug-in hybrid-electric city buses including two-axle, articulated, and biarticulated chassis types (A total of 6 bus types) for the operation phase (Tank-to-Wheel) in Curitiba, Brazil. The systems analysis tool – Advanced Vehicle Simulator (ADVISOR) and a carbon balance method were applied. Seven bus routes and six operation times for each (i.e. 42 driving cycles) are considered based on real-world data. The results show that hybrid-electric and plug-in hybrid-electric two-axle city buses consume 30% and 58% less energy per distance (MJ/km) compared to a conventional two-axle city bus (i.e. 17.46 MJ/km). Additionally, the energy use per passenger-distance (MJ/pkm) of a conventional biarticulated city bus amounts to 0.22 MJ/pkm, which is 41% and 24% lower compared to conventional and hybrid-electric two-axle city buses, respectively. This is mainly due to the former’s large passenger carrying capacity. Large passenger carrying capacities can reduce energy use (MJ/pkm) if the occupancy rate of the city bus is sufficient high. Bus routes with fewer stops decrease energy use by 10-26% depending on the city bus, because of reductions in losses from acceleration and braking. The CO2 emissions are linearly proportional to the estimated energy use following from the carbon balance method, e.g. CO2 emissions for a conventional two-axle city bus amount to 1299 g/km. Further results show that energy use of city bus operation depends on the operation time due to different traffic conditions and driving cycle characteristics. An additional analysis shows that energy use estimations can vary strongly between considered driving cycles from real-world data. The study concludes that advanced powertrains with electric drive capabilities, large passenger carrying capacities and bus routes with a fewer number of bus stops are beneficial in terms of reducing energy use and CO2 emissions of city bus operation in Curitiba. advanced powertrain Advanced Vehicle Simulator ADVISOR Brazil BRT bus rapid transit carbon dioxide CO2 city bus Curitiba driving cycle emissions energy consumption energy efficiency energy use fuel economy hybrid propulsion hybrid-electric parallel hybrid passenger carrying capacity plug-in hybrid-electric Tank-to-Wheel analysis vehicle simulation Analyse Brasilien Emissionen Energieeffizienz Energienutzung Energieverbrauch Fahrzeugsimulation Fahrzeugwirkungsgrad Fahrzyklus Fortschrittlicher Antriebsstrang Hybridantrieb Hybridelektrofahrzeug Kohlenstoffdioxid Kraftstoffverbrauch Passagiertransportkapazität Schnellbussystem Stadtbus Steckdosen-Hybrid Vollhybrid analys bränsleförbrukning drivlina energianvändning energieffektivit energiförbrukning fordonssimulering hybriddrift koldioxidutsläpp körcykel laddhybrid passagerarkapacitet stadsbuss strombuss Energy Engineering Energiteknik Energy Systems Energisystem Vehicle Engineering Farkostteknik

Search results

Assessing the potential of fuel saving and emissions reduction of the bus rapid transit system in Curitiba, Brazil