Cognitive-behavioural based models of chronic pain contend that appraisals of harm affect the individual�s response to pain. It has been suggested that fear of pain and/or anxiety sensitivity predispose individuals to chronicity. However, other factors such as pain self-efficacy are believed to mediate between experience of pain and disability. According to this view, pain is maintained through hypervigilance towards painful sensations and subsequent avoidance. Four studies were conducted in order to evaluate the structure of fear-avoidance models of chronic pain, and also, to examine the role of hypervigilance as an underlying mechanism in maintenance of pain. In study one, using a sample of 207 consecutive patients, two models were tested. First, fear of movement model as proposed by Vlaeyen et al. (1995a) was examined. It was found that negative affectivity has direct effects on the fear and avoidance of pain, which in turn, contributes to disability. In total, fear/avoidance accounted for a significant amount of the variance of disability. In addition, severity of pain was found to increase pain disability, while itself is influenced still by negative affectivity. These findings supported the model of fear of pain as described by Vlaeyen et al. (1995a). Further, we found that self-efficacy may mediate the impact of fear of pain on disability and reduces the perceived physical disability. At the same time, self-efficacy was shown to have direct reductive impact on disability. However, both studies indicated that people who are fearful in response to pain are more likely to develop disability, although self-efficacy may play a moderating role. In the studies one, two, and three, the role of hypervigilance in over attending to pain was investigated. In study one a large sample of 168 chronic pain patients were studied. Questionnaires measuring different aspects of pain and a computerised version of the Dot-Probe Task were administered. Four types of words related to different dimensions of pain and matched neutral words were used as stimuli. Reaction times in response to the stimuli were recorded. A factorial design 3x4x2x2 and ANOVAs were employed to analyse the data. Chronic pain patients showed a cognitive bias to sensory pain words relative to affective, disability, and threat-related words. However, contrary to expectations, those high in fear of pain responded more slowly to stimuli than those less fearful of pain. These results suggest that patients with chronic pain problems selectively attend to sensory aspects of pain. However, selective attention appears to depend upon the nature of pain stimuli. For those who are highly fearful of pain they may not only selectively attend to pain-related information but also have difficulty disengaging from those stimuli. In study two, 35 chronic pain patients were compared with the same number matched healthy subjects. Both groups completed measures of fear of pain, anxiety sensitivity, depression and anxiety, in addition to dot probe task. Results indicated that both groups show similar attentional bias to sensory words in comparison with other word types. However, the level of this biasness was higher for chronic pain patients. Lack of significant differences between patients and controls is discussed in the context of possible evolutionary value of sensitivity to pain as an adaptive reaction in healthy controls, and contrary, as a maladaptive response to pain in chronic pain patients. The results of the previous research suggest that chronic pain patients demonstrate cognitive biases towards pain-related information and that such biases predict patient functioning. The forth study examined the degree to which a successful cognitive-behavioural program was able to modify the observed attentional bias towards sensory pain words. Forty-two patients with chronic pain conditions for more than three months were recruited prior to commencing a cognitive-behavioural pain management program. Participants were assessed before the program, after the program and at one-month follow-up. Results confirmed that chronic pain patients exhibited biased attention towards sensory pain-related words at pre-treatment. These biases were still evident at post-treatment, but were no longer statistically significant at follow up. Multiple regression analyses indicated that the changes in attentional bias towards sensory words between post-treatment and follow-up were predicted by pre- to post- treatment changes in fear of movement (Tampa Scale for Kinesiophobia) but not other relevant variables, such as fear of pain or anxiety sensitivity. These results demonstrate that successful cognitive-behavioural treatments can reduce selective attention, thought to be indicative of hypervigilance towards pain. Moreover, these biases appear to be changed by reducing the fear associated with movement. Theoretically, these results provide support for the fear of (re)injury model of pain. Clinically, this study supports the contention that fear of (re)injury and movement is an appropriate target of pain management and that reducing these fears causes patients to attend less to pain-related stimuli.

<p>Selektiv mutism är en störning som försämrar prestationsförmågan i studier eller arbete samt försvårar kommunikationen. Störningen gör att barnet oftast avstår att tala på förskolan, sexårsverksamheten samt på skolan medan det däremot talar helt obehindrat hemma. Syftet var att få en ökad förståelse för hur några pedagogers arbete påverkas av vilken kunskap de har om och hur de arbetar med elever som har selektiv mutism. Undersökningen har genomförts utifrån fyra kvalitativa intervjuer med pedagoger som arbetar i tre olika kommuner i Sverige. Urvalet har gjorts utifrån deras erfarenheter av att arbeta med barn som har selektiv mutism och deras tillgång alternativt avsaknad av handledning i ämnet. Tre kvinnliga och en manlig pedagog har intervjuats och deras erfarenhetsområde utgörs av sex-årsverksamhet, grundskola, grundsärskola och gymnasiesärskola. En pedagog har erhållit begränsad handledning i ett tidigt skede, en annan har fått och får kontinuerlig handledning medan de övriga två inte har fått någon handledning alls. Resultatet påvisade ett stort behov av handledning samtidigt som ytterst få i Sverige har den speciella kompetens, som krävs för att kunna bistå med det.</p>

<p>This thesis consists of two parts, one dominating part concerning spectrally selective solar absorbers and one dealing with thermal solar systems. The appended papers I to VIII concern the solar absorber part, papers dealing with the systems part have not been included in the thesis.</p><p>A new spectrally selective absorber derived from a novel solution-chemistry method has been developed and optimized. The main objective was to investigate the potential of the spectrally selective surface. Some of the questions at issue were; would it be possible to create a suitable absorber composite using this method, how high selectivity could be obtained, could the performance be enhanced by using anti-reflection coatings, which was the optimal layer composition, would the thin films be durable and what was the structure and morphology like on a nano scale? The absorber consists of absorbing thin films of nickel nano-particles embedded in a dielectric matrix of alumina and an overlying anti-reflection film consisting of one of the following materials silica, hybrid-silica, alumina or silica-titania. Solution and sol-gel chemistry were used in the process. The thin films were spin-coated onto an aluminum substrate followed by a heat-treatment that generated the multi layer selective solar absorber. </p><p>The optical constants for the thin film materials in question were determined. An optimal three layer structure was modeled using the experimentally determined optical constants. The theoretical three layer stack was experimentally confirmed and achieved a solar absorptance of 0.97 and a thermal emittance of 0.05 which definitely are commercially competitive values. The configuration of the three layer stack is: an 80%nickel-20%alumina film at the base, a 40%nickel-60%alumina film in the middle and a silica or hybrid-silica film at the top. The three layer absorber was subjected to high temperature and condensation accelerated ageing tests designed by IEA Task 27. The condensation test did not degrade the absorber whatsoever but the high temperature test did reveal some oxidation of the nickel particles. The oxidation occurs initially and then stops. A formed nickel-oxide layer hinders further oxidation. The level of oxidation is small and the absorber is qualified according to the IEA Task 27 test procedure.</p>

High density, uniform GaN nanodot arrays with controllable size have been synthesized by using template-assisted selective growth. The GaN nanodots with average diameter 40nm, 80nm and 120nm were selectively grown by metalorganic chemical vapor deposition (MOCVD) on a nano-patterned SiO2/GaN template. The nanoporous SiO2 on GaN surface was created by inductively coupled plasma etching (ICP) using anodic aluminum oxide (AAO) template as a mask. This selective regrowth results in highly crystalline GaN nanodots confirmed by high resolution transmission electron microscopy. The narrow size distribution and uniform spatial position of the nanoscale dots offer potential advantages over self-assembled dots grown by the Stranski–Krastanow mode. / Singapore-MIT Alliance (SMA)

A major challenge in the post-genomic era is to understand how genome sequence variants (genotype) give rise to the enormous diversity observed in terms of morphology, physiology and behavior (phenotype) among living organisms. Domestic animals—with their tremendous phenotypic variation—are excellent model organisms for determining the relationships between genotype and phenotype. In this thesis, I describe the utilization of the chicken, in combination with modern genetic and genomic approaches, in developing our understanding of the genetic mechanisms underlying phenotypic variation. These studies provide novel information on the genetics behind variation in carotenoid- and melanin-based pigmentation—observed in many organisms—and also cast light on the genetic basis of chicken domestication. In paper I, we report that the yellow skin phenotype—observed in most commercial chickens—is caused by one or several tissue-specific mutations altering the expression of beta-carotene oxygenase 2 (BCO2 or BCDO2) in skin. In addition, we present the first conclusive evidence of a hybrid origin of the domestic chicken, since the allele causing yellow skin most likely originates from the grey jungle fowl (Gallus sonneratii) and not from the previously described sole ancestor, the red jungle fowl (Gallus gallus). In paper II, we detect a number of loci that were likely important during the domestication process of chicken and the later specialization into meat (broiler) and egg (layer) producing lines. One of the major findings was that worldwide, almost all domestic chickens carry a missense mutation in TSHR (thyroid stimulating hormone receptor) in a position that is completely conserved amongst vertebrates. We speculate that this “domestication-mutation” has played an important role in the transformation of the wild red jungle fowl ancestor into the modern domestic chicken. In paper III, we demonstrate that the dilution of red (pheomelanin) pigmentation—observed in the plumage of the Inhibitor of Gold chicken—is caused by a frame-shift mutation in the catechol-O-methyltransferase domain containing 1 (COMTD1) gene. The production and regulation of pheomelanin is poorly understood and this discovery advances our current knowledge of this pathway.

More and more effort is being spent on security improvements in today's computer environments, with the aim to achieve an appropriate level of security. However, for small computing devices it might be necessary to reduce the computational cost imposed by security in order to gain reasonable performance and/or energy consumption. To accomplish this selective encryption can be used, which provides confidentiality by only encrypting chosen parts of the information. Previous work on selective encryption has chiefly focused on how to reduce the computational cost while still making the information perceptually secure, but not on how computationally secure the selectively encrypted information is.  Despite the efforts made and due to the harsh nature of computer security, good quantitative assessment methods for computer security are still lacking. Inventing new ways of measuring security are therefore needed in order to better understand, assess, and improve the security of computer environments. Two proposed probabilistic quantitative security measures are entropy and guesswork. Entropy gives the average number of guesses in an optimal binary search attack, and guesswork gives the average number of guesses in an optimal linear search attack. In information theory, a considerable amount of research has been carried out on entropy and on entropy-based metrics. However, the same does not hold for guesswork. In this thesis, we evaluate the performance improvement when using the proposed generic selective encryption scheme. We also examine the confidentiality strength of selectively encrypted information by using and adopting entropy and guesswork. Moreover, since guesswork has been less theoretical investigated compared to entropy, we extend guesswork in several ways and investigate some of its behaviors.

This thesis consists of two parts, one dominating part concerning spectrally selective solar absorbers and one dealing with thermal solar systems. The appended papers I to VIII concern the solar absorber part, papers dealing with the systems part have not been included in the thesis. A new spectrally selective absorber derived from a novel solution-chemistry method has been developed and optimized. The main objective was to investigate the potential of the spectrally selective surface. Some of the questions at issue were; would it be possible to create a suitable absorber composite using this method, how high selectivity could be obtained, could the performance be enhanced by using anti-reflection coatings, which was the optimal layer composition, would the thin films be durable and what was the structure and morphology like on a nano scale? The absorber consists of absorbing thin films of nickel nano-particles embedded in a dielectric matrix of alumina and an overlying anti-reflection film consisting of one of the following materials silica, hybrid-silica, alumina or silica-titania. Solution and sol-gel chemistry were used in the process. The thin films were spin-coated onto an aluminum substrate followed by a heat-treatment that generated the multi layer selective solar absorber. The optical constants for the thin film materials in question were determined. An optimal three layer structure was modeled using the experimentally determined optical constants. The theoretical three layer stack was experimentally confirmed and achieved a solar absorptance of 0.97 and a thermal emittance of 0.05 which definitely are commercially competitive values. The configuration of the three layer stack is: an 80%nickel-20%alumina film at the base, a 40%nickel-60%alumina film in the middle and a silica or hybrid-silica film at the top. The three layer absorber was subjected to high temperature and condensation accelerated ageing tests designed by IEA Task 27. The condensation test did not degrade the absorber whatsoever but the high temperature test did reveal some oxidation of the nickel particles. The oxidation occurs initially and then stops. A formed nickel-oxide layer hinders further oxidation. The level of oxidation is small and the absorber is qualified according to the IEA Task 27 test procedure.

Vertical cavity surface emitting lasers (VCSELs) are today a commodity on the short wavelength laser market due to the ease with which they are manufactured. Much effort has in the last decade been directed towards making long wavelength VCSELs as successful in the marketplace. This has not been achieved due to the much more difficult fabrication technologies needed for realising high performance long wavelength VCSELs. At one point, GaInNAs quantum wells gain regions grown on GaAs substrates seemed to be the solution as it enabled all-epitaxial VCSELs that could make use of high contrast AlGaAs-based distributed Bragg reflectors (DBRs) as mirrors and lateral selective oxidation for optical and electrical confinement, thereby mimicking the successful design of short wavelength VCSELs. Although very good device results were achieved, reproducible and reliable epitaxial growth of GaInNAs quantum wells proved difficult and the technology has not made its way into high-volume production. Other approaches to the manufacturing and material problems have been to combine mature InP-based gain regions with high contrast AlGaAs-based DBRs by wafer fusion or with high contrast dielectric DBRs. Commonly, a patterned tunnel junction provides the electrical confinement in these VCSELs. Excellent performance has been achieved in this way but the fabrication process is difficult. In this work, we have employed high strain InGaAs quantum wells along with large detuning between the gain peak and the emission wavelength to realize GaAs-based long wavelength VCSELs. All-epitaxial VCSELs with AlGaAs-based DBRs and lateral oxidation confinement were fabricated and evaluated. The efficiency of these VCSELs was limited due to the optical absorption in the doped DBRs. To improve the efficiency and manufacturability, two novel optical and electrical confinement schemes based on epitaxial regrowth of current blocking layers were developed. The first scheme is based on a single regrowth step and requires very precise processing. This scheme was therefore not developed beyond the first generation but single mode power of 0.3 mW at low temperature, -10ºC, was achieved. The second scheme is based on two epitaxial regrowth steps and does not require as precise processing. Several generations of this design were manufactured and resulted in record high power of 8 mW at low temperature, 5ºC, and more than 3 mW at high temperature, 85ºC. Single mode power was more modest with 1.5 mW at low temperature and 0.8 mW at high temperature, comparable to the performance of the single mode lateral oxidation confined VCSELs. The reason for the modest single mode power was found to be a non-optimal cavity shape after the second regrowth that leads to poor lateral overlap between the gain in the quantum wells and the intensity of the optical field. / QC 20100825

Selektiv mutism är en störning som försämrar prestationsförmågan i studier eller arbete samt försvårar kommunikationen. Störningen gör att barnet oftast avstår att tala på förskolan, sexårsverksamheten samt på skolan medan det däremot talar helt obehindrat hemma. Syftet var att få en ökad förståelse för hur några pedagogers arbete påverkas av vilken kunskap de har om och hur de arbetar med elever som har selektiv mutism. Undersökningen har genomförts utifrån fyra kvalitativa intervjuer med pedagoger som arbetar i tre olika kommuner i Sverige. Urvalet har gjorts utifrån deras erfarenheter av att arbeta med barn som har selektiv mutism och deras tillgång alternativt avsaknad av handledning i ämnet. Tre kvinnliga och en manlig pedagog har intervjuats och deras erfarenhetsområde utgörs av sex-årsverksamhet, grundskola, grundsärskola och gymnasiesärskola. En pedagog har erhållit begränsad handledning i ett tidigt skede, en annan har fått och får kontinuerlig handledning medan de övriga två inte har fått någon handledning alls. Resultatet påvisade ett stort behov av handledning samtidigt som ytterst få i Sverige har den speciella kompetens, som krävs för att kunna bistå med det.

<p>Simply recalling a memory has very different consequences than retelling it. Accuracy is often emphasized when events are recalled; however, retelling an event in a conversational manner may compromise accuracy in order to make the story more entertaining (e.g., Dudukovic, Marsh, & Tversky, 2004), or to support a specific argument (e.g., Tversky & Marsh, 2000). I will focus on the memorial consequences and underlying mechanisms of retellings. </p><p>First, I will review research that shows the inaccuracies of retellings. In reviewing this research, I will identify possible underlying mechanisms that change memory through retellings, such as the following: schema-guided reconstruction, interference, transfer inappropriate processing, and retrieval-induced-forgetting. </p><p>Second, I will experimentally investigate possible cognitive mechanisms underlying these memorial changes. In the first experiment, I show that the elaborative nature of storytelling does not influence memory more so than simply selectively rehearsing that information. In the second and third experiments, I investigate how retelling autobiographical events influences qualitative aspects of memory. These two experiments suggest that retrieving autobiographical events influences memory quality, although the specific nature in which they are retold has no effect. I close by connecting these three experiments to the broader literature.</p> / Dissertation