Conventional microelectronic and power electronic packages based on Si devices usually work below 150°C. The emergence of wide-bandgap devices, which potentially operate above a junction temperature of 250°C, results in growing research interest in high-density and high-temperature packaging. There are high-temperature materials such as encapsulants on the market that are claimed for capability of continuous operation at or above 250°C. With an objective of identifying encapsulants suitable for packaging wide-bandgap devices, some of commercial high-temperature encapsulants were obtained and evaluated at the beginning of this study. The evaluation revealed that silicone elastomers are processable for various types of package structure and exhibit excellent dielectric performance in a wide temperature range (25 - 250°C) but are insufficiently stable against long-term aging (used by some manufacturers, e.g., P²SI, to evaluate polymer stability) at 250°C. These materials cracked during aging, causing their dielectric strength to decrease quickly (as soon as 3 days) and significantly (60 - 70%) to approximately 5 kV/mm, which is below the value required by semiconductor packaging. The results of this evaluation clearly suggested that silicone needs higher thermal stability to reliably encapsulate wide-bandgap devices. Literature survey then investigated possible methods to improve silicone stability. Adding fillers is reported to be effective possibly due to the interaction between filler surface and polymer chains. However, the interaction mechanism is not clearly documented. In this study, the effect of Al₂O₃ filler on thermal stability was first investigated by comparing the performance of unfilled and Al₂O₃-filled silicones in weight-loss measurements and dielectric characterization. All test results on composites filed with Al₂O₃ micro-rods indicated that thermal stability increased with increasing filler loading. Thermogravimetric analysis (TGA) test demonstrated that the temperature of degradation onset increased from 330 to 379°C with a 30 wt% loading of Al₂O₃ rods. In isothermal soak test, unfilled and 30-wt%-filled silicones lost 10% of polymer weight in 700 and 1800 hours, respectively. The dielectric characterization found that both Weibull parameters, characteristic dielectric strength (E₀, representing the electric field at which 62.3% of samples are electrically broken down) and shape parameter (β, representing the spread of data. The larger the β, the narrower the distribution) can reflect the thermal stability of polymers. Both of them were influenced by microstructure evolution, to which β was found to be more sensitive than E₀. The characteristic dielectric strength of unfilled silicone decreased significantly after 240 hours of aging at 250°C, whereas that of Al₂O₃/silicone composites exhibited no significant change within 560 hours. The shape parameter of Al₂O₃-filled silicone decreased slower than that of unfilled silicone, also indicating the positive effect of Al₂O₃ micro-rods on thermal stability. Improved thermal stability can be explained by restrained chain mobility caused by interfacial hydrogen bonds, which are formed between hydroxyl groups on Al₂O₃ surface and silicone backbone. In this study, the effect of hydrogen bonds was investigated by dehydrating Al₂O₃ micro-rods at high temperature in N₂ to partially destroy the bonds. Removal of hydrogen bonds impaired thermal stability by increasing the initial weight-loss rate from 0.025 to 0.036 wt%/hour. The results explained the importance of interfacial hydrogen bond, which effectively reduced the average chain mobility, hindered the formation of degradation products, and led to higher thermal stability. The main discoveries of this study are listed below: 1. Al₂O₃ micro-rods were found to efficiently improve the thermal stability of silicone elastomer used for high-temperature encapsulation. 2. Characteristic dielectric strength and shape parameter obtained from Weibull distribution reflected the change of material microstructure caused by thermal aging. The shape parameter was found to be more sensitive to microscale defects, which were responsible for dielectric breakdown at low electric field. 3. Hydrogen bonds existing at filler/matrix interface were proven to be responsible for the improvement of thermal stability because they effectively restrained the average chain mobility of the silicone matrix. / Ph. D.

Timber-concrete composite (TCC) structures are becoming more popular in several industrial applications as an efficient method for optimizing the structural performance and the cost of construction as well as lowering the emissions of carbon dioxide. TCC floors are more sustainable than pure concrete floors and more resistant to vibrations and excessive deflections than pure wooden floors. The effectiveness of a TCC floor is dependent on the connection between the materials. The stiffness and strength of the composite element increases by having a rigid connection. An example of a rigid connection is an adhesive-bonded connection, however obtaining a connection without slip is difficult considering there will always be certain amount of slippage in the connection. In this thesis adhesive connections are investigated with two different types of adhesive, one called Sikasil SG-500 and the other Sika PS. The application of the adhesives for the test specimen differ. Since Sika PS is a more fluid glue, a different approach was necessary than for the Sikasil SG-500. Five test specimen were tested of each adhesive by performing double shear push out tests and comparing the results to a numerical model, which was performed in ABAQUS. In the numerical model, the adhesive was created as a cohesive element. Furthermore the properties of the modeled adhesive was based on the experimental results for respective adhesive. The experimental results showed that both adhesives managed the estimated shear force in the serviceability limit state and the ultimate limit state and yet remained in the elastic region. Sikasil SG-500 turned out to be more flexible while Sika PS specimen resulted in higher shear strength. The short creep tests (30 minutes of a constant load) showed that the deformation increased more for Sika PS than for Sikasil SG-500. However both adhesives had large deformations after only 30 minutes. There was also a difference in the average longitudinal shear strength, where it resulted in 1.06 MPa for Sikasil SG-500 and 2.02 MPa for Sika PS. This study indicates that Sika PS is more preferable in TCC structures than Sikasil SG-500.

Synthetic, self-oscillating vocal fold (VF) models are physical models whose life-like vibration is induced and perpetuated by fluid flow. Self-oscillating VF models, which are often fabricated life-size from soft silicone elastomers, are used to study various aspects of voice biomechanics. Despite their many advantages, the development and use of self-oscillating VF models is limited by the casting process used to fabricate the models. Consequently, this thesis focuses on the development of 3D printing processes for fabricating silicone VF models. A literature review is first presented which describes three types of material extrusion 3D printing processes for silicone elastomers, namely direct ink writing (DIW), embedded 3D printing, and removable-embedded 3D printing. The review describes each process and provides recent examples from literature that show how each has been implemented to create silicone prints. An embedded 3D printing process is presented wherein a set of multi-layer VF models are fabricated by extruding silicone ink within a VF-shaped reservoir filled with a curable silicone support matrix. The printed models successfully vibrated during testing, but lacked several desirable characteristics which were present in equivalent cast models. The advantages and disadvantages of using this fabrication process are explored. A removable-embedded 3D printing process is presented wherein shapes were fabricated by extruding silicone ink within a locally-curable support matrix then curing the silicone ink and proximate matrix. The printing process was used to fabricate several geometries from a variety of silicone inks. Tensile test results show that printed models exhibit relatively high failure strains and a nearly isotropic elastic modulus in directions perpendicular and parallel to the printed layers. A set of single-material VF models were printed and subjected to vibration testing. The printed models exhibited favorable vibration characteristics, suggesting the continued use of this printing process for VF model fabrication. A micro-slicing process is presented which is capable of creating gcode for 3D printing multiple materials in discrete and mixed ratios by utilizing a previously-sliced single-material shape and a material definition. An important advantage of micro-slicing is its ability to create gcode with a mixed-material gradient. Initial test results and observations are included. This micro-slicing process could be used in material extrusion 3D printing

No description available.

<p>While eye drops are a well-accepted and convenient method for ocular drug delivery, they exhibit significant limitations such as poor drug bioavailability, low ocular residence time, pulsatile delivery profiles in the tear fluid as well as the need for patient compliance. Silicone hydrogel (SH) contact lenses have been proposed as alternative ocular drug delivery systems due to their potential for targeted delivery to the corneal surface and high oxygen permeability. The ability of novel hyaluronic acid (HA)-containing silicone hydrogel materials to release timolol maleate (TM), an antiglaucoma drug, or ketotifen fumarate (KF), an anti-histamine administered for ocular allergies, was examined.</p> <p>The releasable wetting and the therapeutic agent were added to the pre-polymer mixture of the SH during synthesis through direct entrapment, while the reaction was performed by UV induced free-radical. The impact of the wetting agent on the swellability, surface wettability, optical transparency and <em>in vitro </em>drug release was studied.</p> <p>Simultaneous drug and wetting agent incorporation resulted in modified SH materials with slightly increased water content and significantly improved surface wettability. In addition, the optical transparency of these materials was not affected by drug loading. However, direct entrapment of HA decreased their optical clarity. <em>In vitro</em> release showed that TM was released over a 14 day period, whereas KF release lasted up to 36 days. For both therapeutic agents used in the current research, non-covalent entrapment of wetting agent and its MW did not significantly change the release kinetics, however the release rate of TM was slowed and controlled by the release of the HA, due to electrostatic interactions between the protonated TM and the anionic HA.</p> <p>The development of SH materials capable of simultaneously releasing a therapeutic and a wetting agent for an extended period of time and in a sustained manner can have a significant potential as extended drug delivery systems for the treatment of front of the eye diseases while also possibly providing comfort during wear.</p> / Master of Applied Science (MASc)

Hospital-acquired infections (HAIs) pose a significant and increasing threat to global health. One primary cause of this threat is increasing antibiotic resistance. As traditional antibiotics continue to grow less effective, there is an urgent need for novel antimicrobial strategies. This work explores the potential of ceragenins, also known as cationic steroid antimicrobials (CSAs), as a promising alternative to combat HAIs. Specifically, we investigated potential roles that CSAs can play in the context of multiple medical device coatings in healthcare settings. Ceragenins are synthetic mimic of antimicrobial peptides (AMPs) which exhibit broad-spectrum antimicrobial activity against many common pathogens that have been cited as high priority by global health organizations. Unlike traditional antibiotics, which rely on specificity to bacterial enzymes or processes, ceragenins disrupt microbial membranes generally. This mechanism of action allows ceragenins to bypass many of the related antibiotic resistance mutations of bacteria and fungi. As microbial membranes are a highly conserved and fundamental structure of these pathogens, it is much more difficult for microbes to develop mutations that prevent CSA binding. Additionally, ceragenins are resistant to both host and pathogenic proteolytic degradation and are cost-effective to produce, which place CSAs as an attractive alternative to traditional antibiotics. This research investigates the integration of ceragenins into various medical devices to prevent HAIs. Specifically, we investigated silicone tissue expanders, peripherally inserted central catheter (PICC) lines, and adhesive devices which include both polyacrylate and silicone scar tape. These studies include the development of coating techniques to maximize appropriate antimicrobial activity while maintaining stability and biocompatibility across these different base materials. Our experimental results demonstrate that ceragenin-coated devices significantly reduce microbial colonization and biofilm formation. We considered the length of antimicrobial activity needed and developed coatings that would be appropriate for those use cases. This reduction in harmful pathogenic colonization demonstrates their potential to improve patient outcomes and reduce healthcare costs associated with HAIs. Further research and development could facilitate the continued adoption of ceragenin-based coatings in medical devices, which can reduce the incidence of HAIs while contributing to the broader fight against antibiotic-resistant infections worldwide.

Cette thèse présente une contribution originale à la compréhension et la maîtrise des mécanismes physico-chimiques qui contrôlent l’élaboration d’un nouveau matériau polymère biphasique de type Super-TPV (thermoplastique vulcanisé) contenant une phase réticulée par le procédé d’extrusion réactive. La phase caoutchoutique est constituée d’un Vinyl-Polydiméthylsiloxane (vinyl-PDMS) de haute masse molaire (gomme silicone) qui est réticiluée dynamiquement avec une matrice thermoplastique PA12 lors du procédé de mise en œuvre à l’état fondu (T200°C). Le premier des quatre chapitres de ce mémoire est consacré à une étude bibliographique des différents aspects fondamentaux de la réticulation radicalaire des silicones. Dans le chapitre 2, nous avons étudié le processus de réticulation radicalaire du PDMS en fonction de la température (T&gt; 160°C). Le peroxyde de dicumyle (DCP) a été utilisé comme amorceur de la réaction. L’effet de la température et de la concentration en DCP sur la cinétique de réticulation et les propriétés viscoélastiques finales du matériau ont été étudiées. Pour tenter de contrôler cette réaction de réticulation à ces températures élevées, le tétraméthylpipéridyloxyde (TEMPO) a été utilisé. Nous avons ainsi montré que le temps à la transition sol-gel viscoélastique augmente en fonction de la concentration de l’inhibiteur. La variation du rapport molaire DCP/TEMPO a permis de définir un rapport molaire optimal et ainsi de contrôler le temps d’inhibition et la densité de réticulation finale. Des études en RMN, DSC et TGA-MS ont montré que le mécanisme à l’origine de ce temps d’inhibition est le greffage des radicaux nitroxyles sur la chaine polymère silicone. Dans le chapitre 3, un modèle original a été développé avec succès pour décrire la rhéocinétique de la réticulation radicalaire contrôlée du PDMS. Cette modélisation est basée sur le couplage de la cinétique des macro-radicaux PDMS recombinés [Rcc(t)] et la variation des modules complexes de cisaillement (G'(t) et de G"(t)). Notre modèle rhéocinétique tient compte de la décomposition de l'initiateur (DCP) et des macro-radicaux PDMS piégés en présence d'un inhibiteur tel que le TEMPO. Finalement, dans le chapitre 4 ces études fondamentales ont été développées à l’élaboration d’un TPV basé sur la réticulation radicalire de la gomme silicone dans une matrice PA12. Nous avons alors montré que l'addition du TEMPO permet d’élaborer par un procédé dynamique un nouveau Super-TPV ayant une structure et une morphologie contrôlée. / The control of macromolecular structure has recently become an important topic of polymer science from both an academic and an industrial point of view. Indeed, free-radical crosslinking of Polydimethyl-vinylmethyl-siloxane (vinyl-PDMS) rubber by organic peroxide suffers from premature crosslinking at high temperatures, which is called scorching. Consequently, the basic aim of the investigations described in this thesis is to widen and explore the network topology–crosslinking kinetics relationships and find a novel way to control free-radical crosslinking chemistry and topological parameters of final PDMS networks. The work is primarily focused on the extensive study of the crosslinking control of PDMS rubber at high temperatures. A novel composition using 2,2,6,6-tetramethylpiperidinyloxyl (TEMPO) and dicumyl peroxide (DCP) for scorch delay and control of the final network topology of the PDMS has been proposed. The work specified in this thesis is therefore directed to find a proper [TEMPO]/[DCP] ratio provided the development of a new biphasic material such as PA12/PDMS blend type TPV (Thermoplastic Vulcanizated). For this purpose a new method based on the relationship between the kinetics of the macro-radicals coupling [Rcc(t)] was derived from a fundamental kinetic model and the viscoelastic changes of the complex shear modulus (G’(t) and G”(t)). The kinetic model takes into account the initiator (DCP) decomposition and the trapped PDMS macro-radicals in the presence of a radical scavenger such as TEMPO. As a main result, the rheological modelling shows that this new method accurately predicts the time variation of complex shear modulus at any temperature and [TEMPO]/[DCP] ratio. Interestingly, addition of TEMPO to the TPV novel composition provided the PA12/PDMS blend compatibilization in the dynamic process and gives a new material having a controlled structure and morphology. A better insight in understanding the blend composition and the morphology development relationships is aimed at.

L'émergence des nanotubes de carbone a ouvert de nouveaux champs d'application dans le domaine des matériaux polymères. L'ajout de ces charges carbonées au sein de polymères permet la mise en œuvre de composites aux propriétés électriques optimisées. La conductivité de ces matériaux dépend en grande partie de l'organisation des charges dans la matrice, notamment de la présence de réseaux percolants. L'objectif du présent travail de thèse est de comprendre les mécanismes de structuration des nanotubes de carbone au sein de différents milieux. L'architecture de ces réseaux de charges a principalement été révélée par le biais de mesures électriques et diélectriques. L'originalité de nos travaux réside dans l'utilisation de matrices liquides, notamment des huiles de silicone, afin de s'affranchir des contraintes présentes dans les plastiques d'une part, et de simplifier les processus de mise en œuvre d'autre part. Le manuscrit de thèse est articulé autour de six chapitres. Une première partie bibliographique aborde les propriétés des nanotubes de carbone ainsi que les phénomènes que sont la percolation et la percolation dynamique. Le second chapitre, matériel & méthode, présente les matériaux employés ainsi que les différentes techniques de caractérisation utilisées au cours de la thèse. Le troisième chapitre de la thèse aborde, à travers des mesures de conductivité, la percolation dynamique des nanotubes de carbone sein d'huiles de silicone. Le chapitre 4 propose une modification la loi de puissance de Kirkpatrick, afin de décrire la conductivité en fonction du temps et du taux de charge. L'exposant critique de percolation, caractérisant la transition isolant conducteur, se révèle être un indicateur de l'état de dispersion des nanotubes à travers la matrice. Le chapitre 5 démontre la possibilité de contrôler l'organisation des charges par l'application d'un champ électrique. L'application d'un champ élevé permet une augmentation de plusieurs ordres de grandeur de la conductivité ainsi qu'une diminution des charges nécessaire à la formation d'un réseau percolant. Nous avons notamment déterminé des seuils de percolation de l'ordre de 0.005% massique en nanotube de carbone. Enfin, l'influence des propriétés intrinsèques de la matrice, telles la viscosité et la tension de surface, est étudié dans le chapitre 6. La dispersion des nanotubes de carbone s'avère être favorisée au sein de liquides ayant des tensions de surface proches de celle des tubes. Au contraire, une agrégation de charge est rapidement observée dans le cas ou la différence de tension de surface charge-matrice est importante. Nous avons également observé que la percolation des nanotubes est défavorisée au sein de milieux visqueux. / The rise of carbon nanotube has open possibility for composites polymers. Mixing this carbonaceous filler with polymer medias leads to an optimization of the electrical properties. Then, conductivity mainly depends of the filler architecture, especially the presence of percolating networks. The objective of this work is to understand the percolation mechanisms of the carbon nanotubes in different media. During this study, filler network has been revealed by the mean of electrical and dielectrical measurements. The originality of our work lies in the use of liquid matrices, such as silicone oils, in order to overcome the stresses in the plastic on the one hand, and to simplify the processing in other hand. This thesis is organized around six chapters. The first bibliographic part discusses the carbon nanotubes properties as well as percolation and dynamic percolation phenomena. The second chapter, matériel & méthode, presents the materials used and the different characterization techniques employed. The third chapter of the thesis talks about dynamic percolation of carbon nanotubes in silicone oil, probed by conductivity measurements. Chapter 4 provides a change of the power law Kirkpatrick to describe the conductivity as a function of time and filler content. The critical exponent of percolation is proving to be an indicator of the dispersion state of nanotubes throughout the matrix. In the Chapter 5, electric field is depicted as a tool to control the organization of fillers. The application of a high field increases the conductivity of several orders of magnitude and decreases the percolation threshold. Percolation thresholds close to 0.005 wt % have been determined. At last, the influence of the intrinsic properties of the matrix, such as viscosity and surface tension, is discussed in Chapter 6. Carbon nanotubes dispersion appears to be favored if the difference of surface tension between filler and liquid is low. In contrast, a filler aggregation is rapidly observed in the case where the difference in surface tension is important. We also observed that the percolation of the nanotubes is favored in viscous media.

The research described in this thesis originated from an idea to develop new body protection for the sport of fencing. The ultimate goal is to develop body armour which would be flexible, wearable, washable, light and breathable, offer protection from injuries and cover the entire body of a sportsman. A new material which exhibits shear thickening behaviour has been specially developed for this purpose in the process of this investigation. The material was designed and synthesised as a soft polymeric system which is flexible, chemically stable and able to increase the value of its modulus of elasticity upon impact at a high strain rate, while remaining in its soft gel-like elastomeric state when low strain rate deformation is applied. The polymeric system that has been developed is based on interpenetrating polymeric networks (IPN) of immiscible polyurethane/urea-ester/ether and poly(boron)n(dimethylsiloxane)m (where on average m ≈ 16 n). In addition, as the polydimethylsilane (PDMS) based polymeric system strongly tends to phase separation, the siloxane polymeric network was chemically cross-linked to the polyurethane polymeric network through polyurethane chemical cross-link-bridges. In order to introduce polyurethane cross-links to a siloxane-based polymeric network, some of the attached methyl groups in the PDMS polymeric backbone were substituted by ε-pentanol groups. The resulting polymeric system combines properties of an alternating copolymer with IPN. The actual substitution of the methyl groups of PDMS into alternating ε-pentanol groups was performed by Grignard reaction of trifunctional chlorosilane monomers, magnesium and 1,5-dibromopentane. Chemical analytical techniques like FT-IR, 13C NMR and 1H NMR spectroscopy were used to reveal the chemical structure of the synthesised polymeric network. The mechanical and dynamical properties of the obtained polymeric system were analysed by dynamic mechanical analysis (DMA). This part of the investigation indicated that the novel polymeric system exhibited shear thickening behaviour, but only at a narrow diapason of deformations (i.e., deformations between 2 to 3 % of the length of the sample). At this limited diapason of deformation an effective increase of the modulus of elasticity from 6 MPa (at lower frequencies, i.e., up to ≤6 Hz of the applied oscillating stress) to 65 MPa (at frequencies between 12.5 to 25 Hz) was obtained. However, no increase in the modulus of elasticity was recorded at deformations below 1.5 % or above 3.5 % of length of the sample at the same frequencies (0 to 25Hz) of the applied oscillating stress.

Passive sampling, as opposed to the conventional spot or bottle water sampling technique, has shown to be reliable and efficient in monitoring the toxicologically relevant, freely dissolved (e.g. bioavaialable) concentrations of a wide range of organic contaminants in water. At the same time, partitioning controlled delivery (passive dosing; PD) techniques promise to overcome many of the challenges associated with toxicity testing of hydrophobic substances that may bias the interpretation of toxicity data. The present study investigated the feasibility of coupling silicone rubber passive sampling devices (SR-PSDs) with bioassay techniques for both chemical and ecotoxicological assessment of complex mixtures of organic contaminants in the aquatic environment. SR-PSDs were deployed in water at various locations within the Ythan catchment (north east, Scotland, UK), Forth estuary and the Firth of Forth (east coast of central Scotland, UK) for 7 to 9 weeks. Following retrieval, extracts from the SR-PSDs were analysed for dissolved concentrations of a variety of organic contaminants including PAHs and PCBs using GC-MS and GC-ECD respectively and were screened for a wide range of pesticides using GC-MS/MS and LC-MS/MS. The extracts were further evaluated for acute cytotoxicity (i.e. neutral red uptake assay) and EROD induction potential using rainbow trout liver cell line (Oncorhynchus mykiss; RTL-W1) and for phytotoxicity and developmental toxicity potential using algal growth inhibition test (with a marine phytoplankton, Diacronema lutheri) and fish embryo toxicity test (with embryos from zebrafish Danio rerio) respectively. Overall, the individual and total dissolved concentrations of PAHs (ΣPAH40; parent and branched) and PCBs (ΣPCB32; ortho and mono-ortho) measured in water from the Ythan, Forth estuary and Firth of Forth were relatively low compared with other studies using PSDs. A number and level of pesticides, including insecticides, herbicides and fungicides of varying hydrophobicity (log KOWs ~2.25 to ~5.31) were detected in the silicone rubber (SR) extracts from the Ythan catchment, the Forth estuary and the Firth of Forth, suggesting input mainly from agricultural run-off and possibly from direct discharges. No statistically significant (p<0.05) acute cytotoxicity was observed following 48 h exposure of RTL-W1 cells to SR extracts from the Ythan catchment. But, on a sublethal level, for every site, statistically significant EROD activity was observed to some degree following 72 h exposure. In addition, developmental and algal toxicities on embryos of D. rerio and D. lutheri respectively, were measured in all the deployed samples compared with the procedural controls (undeployed samples). Interestingly, extracts of SR-PSDs from the Forth estuary and the Firth of Forth exhibited growth inhibitions on D. lutheri that were similar to those of extracts from the Ythan, even though, fewer numbers of pesticides were detected in the Forth estuary and Firth of Forth than the Ythan. This suggests that pesticides were not solely responsible for the observed effects in the Ythan catchment. To further improve data from toxicity testing of hydrophobic substances, the study identified the use of SR O-rings as a suitable passive dosing format in in vitro toxicity tests and was partially validated through their use in dosing RTL-W1 cells with two individual PAHs and subsequently determining cytotoxicity and EROD-activity.