This thesis presents models and simulations of dielectrophoretic separation of micro and nano particles. The fluid dynamics involved and the dielectric properties of water inside single-walled carbon nanotube are studied as well. Based on the effective dipole moment method, the particle dynamic model focuses on the translational motions of micro particles. The hydrodynamic force between the particles and the particle-particle electrostatic interactions are considered as well. By comparing the dimensionless parameters, the dominating force can be determined. Based on a simplified version of the particle dynamic model, two numerical simulations are carried out to predict the efficiency of dielectrophoretic separation of micro size particles. The first calculation suggests a strategy to improve the trapping efficiency of E.coli bacteria by applying superimposed AC electric fields. The second calculation discusses the concept of mobility and improves the separation rate of particles by a multi-step trapping-releasing dielectrophoresis strategy. The model is extended down scale to calculate the separation of metallic and semiconducting single-walled carbon nanotubes by the modified effective dipole moment method for prolate ellipsoids. The steeply changed gradient of electric field results in the local joule heating therefore creates gradient of dielectric properties in the solution. As a result, certain pattern of fluid flow with a considerable strength is created and affects the motion of carbon nanotubes especially close to the electrode gap, which indicates that the so-called electrothermal flow should be considered in designing the experiment to separate single-walled carbon canotubes. When the length scale of particles is comparable to that of the electrodes, the calculation of dielectrophoretic force by the effective dipole moment is considered not to be accurate since only the electric field in the center point is taken into account. Hence in the thesis a new method based on distributed induced charge is suggested. By approximating a straight slender body as a prolate ellipsoid, the electric field of multiple points along the centerline are all considered in the calculation and the interaction between particles could be concurrently taken care. This method is expected to be an improved method to calculate the dielectrophoretic force of rod-like virus, DNA, nanowires and carbon nanotubes. The dielectric property of water confined in carbon nanotubes is expected to be dramatically different from that of bulk water. The thesis also contains a molecular dynamics study to reveal the difference also a dependence on the diameter of carbon nanotubes. The results show that along the axial direction, both the static permittivity and the relaxation time are larger than the isotropic bulk water, and in the cross-section plane it is opposite. When the radius of the carbon nanotubes increases, the properties of water inside become closer to the bulk water. / QC 20100820

In this work, gadolinium-based carbon nanocapsules are developed as a novel nanotechnology that addresses the shortcomings of current diagnostic and therapeutic methods of stem cell-based cardiomyoplasty. With cardiovascular disease (CVD) responsible for approximately 30% of deaths worldwide, the growing need for improved cardiomyoplasty has spurred efforts in nanomedicine to develop innovative techniques to enhance the therapeutic retention and diagnostic tracking of transplanted cells. Having previously been demonstrated as a high-performance T1-weighted magnetic resonance imaging (MRI) contrast agent, Gadonanotubes (GNTs) are shown for the first time to intracellularly label pig bone marrow-derived mesenchymal stem cells (MSCs). Without the use of a transfection agent, micromolar concentrations of GNTs deliver up to 10^9 Gd(III) ions per cell, allowing for MSCs to be visualized in a 1.5 T clinical MRI scanner. The cellular response to the intracellular incorporation of GNTs is also assessed, revealing that GNTs do not compromise the viability, differentiation potential, or phenotype characteristics of the MSCs. However, it is also found that GNT-labeled MSCs exhibit a decreased response to select cell adhesion proteins and experience a non-apoptotic, non-proliferative cell cycle arrest, from which the cells recover 48 h after GNT internalization. In tandem with developing GNTs as a new stem cell diagnostic agent, this current work also explores for the first time the therapeutic application of the magnetically-active GNTs as a magnetic facilitator to increase the retention of transplanted stem cells during cardiomyoplasty. In vitro flow chamber assays, ex vivo perfusion experiments, and in vivo porcine injection procedures all demonstrate the increased magnetic-assisted retention of GNT-labeled MSCs in the presence of an external magnetic field. These studies prove that GNTs are a powerful ‘theranostic’ agent that provides a novel platform to simultaneously monitor and improve the therapeutic nature of stem cells for the treatment of CVD. It is expected that this new nanotechnology will further catalyze the development of cellular cardiomyoplasty and other stem cell-based therapies for the prevention, detection, and treatment of human diseases.

Existing growth methods produce single-walled carbon nanotubes (SWCNTs) with a range of structures and electronic properties, but many potential applications require pure nanotube samples. Density gradient ultracentrifugation (DGU) has recently emerged as a technique for sorting as-grown mixtures of single-walled nanotubes into their distinct ( n,m ) structural forms, but this approach has been limited to samples containing only a small number of nanotube structures, and has often required repeated DGU processing. For the first time, it has been shown that the use of tailored nonlinear density gradient ultracentrifugation (NDGU) can significantly improve DGU separations. This new sorting process readily separated highly polydisperse samples of SWCNTs grown by the HiPco method in a single step to give fractions enriched in any of ten different ( n,m ) species. In addition, minor variants of the method allowed separation of the minor-image isomers (enantiomers) of seven ( n,m ) species. Optimization of this new approach was aided by the development of instrumentation that spectroscopically mapped nanotube contents inside undisturbed centrifuge tubes. Besides, sorted nanotube samples enabled the discovery of novel oxygen-doped SWCNTs with remarkable photophysical properties. Modified nanotube samples were produced using mild oxidation of SWCNTs with ozone followed by a photochemical conversion step that induced well-defined changes in emissive properties. As demonstrated for a set of ten separated SWCNT ( n,m ) structures, chemically altered nanotubes possess slightly lower band gap energies with correspondingly longer photoluminescence wavelengths. Treated samples showed distinct, structure-specific near-infrared fluorescence at wavelengths 10 to 15% longer than the pristine semiconducting SWCNTs. Quantum chemical modeling suggests that dopant sites harvest light energy absorbed in undoped nanotube regions by trapping mobile excitons. The oxygen-doped SWCNTs are much easier to detect and image in biological specimen than pristine SWCNTs because they give stronger near-IR emission and do not absorb at the shifted emission wavelength. This novel modification of SWCNT properties may lead to new optical and electronic applications, as it provides a way to change optical band gaps in whole nanotubes or in selected sections.

Single-walled carbon nanotubes are naturally-forming nanostructures that have attracted considerable recent research interest due to their unique opto-electronic properties and comparative ease of fabrication. Two-thirds of nanotube species are semiconductors due to symmetry conditions imposed by their pseudo-one-dimensional tubular structure, and exhibit band-gap photoluminescence when isolated from their environment. Despite their elegant structural simplicity, fundamental properties of carbon nanotubes, such as their intrinsic quantum efficiency, non-linear excitonic recombination mechanisms, and the role of environmental effects, continue to be disputed in the literature. The design of an apparatus capable of observing nanotube photoluminescence is presented, along with conclusive proof of the observation of a single (9,8)-chirality nanotube in the form of spectral, spatial, and polarization-dependent measurements. The dependance of the excitation and emission spectra of a single nanotube on the excitation intensity is explored and the emission spectra found to be described by a Gaussian peak function, in contrast to previously-reported results. The unexpected ability to cause redshifts in the emission spectrum via the ambient humidity is discovered, which has consequences on experimental best practices. Photoluminescence quantum efficiencies are measured to be 4±2% and 13±6% for two different nanotubes. This is at the high end of the range for comparable literature results, and supports the validity of a recent literature value for the effective atomic absorption coefficient for carbon, AC=1.6×10^−3nm^2, which is ten times greater than previous literature values. Pulsed power dependence studies show that the PL emission undergoes ‘hard’ saturation at an excitation intensity of 0.5×10^12photons/pulse/cm2, which is at least 100 times lower than previous reports and provides insight into non-linear decay dynamics. A novel theoretical model is developed to explain this saturation process, which yields an absorption co-efficient of AC=1.2±0.3×10^−3nm^2 as a fit parameter. Time-resolved photoluminescence dynamics are explored using femtosecond excitation correlation spectroscopy. Results suggest that the one-body decay processes are bi-exponential, with time constants of 31±4ps and 313±61ps, but also highlight the limitations of this technique in observing the expected very rapid (~1 ps) two-body Auger recombination process. / Thesis (Master, Physics, Engineering Physics and Astronomy) -- Queen's University, 2008-09-26 16:23:40.81

This report details work toward the fabrication of a single-electron transistor created from a single-walled carbon nanotube (SWNT). Specifically discussed is a method for growing carbon nanotubes (CNTs) via carbon vapor deposition (CVD). The growth is catalyzed by a solution of 0.02g Fe(NO3)3·9H2O, 0.005g MoO2(acac)2, and 0.015g of alumina particles in 15mL methanol. SWNT diameter ranges from 0.6 to 3.0 nm. Also discussed is a method to control nanotube growth location by patterning samples with small islands of catalyst. A novel “maskless” photolithographic process is used to focus light from a lightweight commercial digital projector through a microscope. Catalyst islands created by this method are approximately 400 μm2 in area.

Ce travail de thèse expérimental porte sur l'élaboration et l'étude de systèmes hybrides 1D de nanotubes de carbone mono-feuillets, fonctionnalisés de manière non covalente, sous deux aspects. La première étude s'intéresse à l'intercalation de rubidium dans les faisceaux de nanotubes. L'objectif est de faire le lien entre les propriétés structurales des nanotubes dopés et leurs propriétés électroniques au cours du dopage. Un dispositif original dédié, adapté à l'utilisation sur grands instruments et permettant le suivi « in-situ » de l'intercalation par une approche multi-techniques, a été développé dans ce but. Nous mettons en évidence par EXAFS que l'arrangement local autour des ions rubidium est dépendant de la stœchiométrie des composés étudiés. Il apparaît alors qu'à faible taux de dopage, les sites de défauts oxygénés sont privilégiés. Le changement de structure est également relié à une transition semi-conducteur/métal des nanotubes, observée par mesure de résistance électrique et spectroscopie Raman, et induite par le dopage des nanotubes par le rubidium.La seconde partie expérimentale est consacrée à l'étude du confinement d'oligothiophènes à l'intérieur de nanotubes de carbone mono-feuillets. Des mesures de diffraction des rayons X et de microscopie électronique en transmission haute résolution démontrent l'efficacité de notre protocole d'encapsulation. D'autre part, différentes spectroscopies, absorptions UV-Visible et infrarouge et diffusion Raman, indiquent un transfert de charge relativement faible entre les molécules encapsulées et les nanotubes de carbone. Ce résultat est très bien mis en évidence par les modifications de profil, d'intensité et de fréquence des modes Raman hautes fréquences. On notera le bon accord entre les résultats obtenus ici et les effets de renormalisation de l'énergie de phonon discutés dans la littérature. En complément, des effets de confinement liés au diamètre des nanotubes ont été mis en évidence par l'étude des modes Raman basses fréquences. Deux modèles structuraux sont proposés pour expliquer les tendances observées. Le premier suggère un comportement indépendant de la nature de l'espèce insérée. Dans le second, le nombre de chaines d'oligothiophènes encapsulées en fonction du diamètre des tubes est pris en compte. De plus, nous montrons également une influence significative des défauts structuraux sur les systèmes hybrides. / This experimental work concerns the development and the study of 1D hybrid systems of single-walled carbon nanotubes non-covalently fonctionnalized. Two different approaches are discussed. The first experimental study deals with the intercalation of rubidium in carbon nanotubes bundles. The aim is to link structural and electronic properties along the doping process. To do, we developed an original and dedicated home-made set adapted to the use on synchrotron facilities. It permits the following of the intercalation by means of an in-situ multi-techniques approach. In this part, we pointed out that the local environnement of rubidium is dependant of the compound stœchiometries. It appears that oxygenated surface defects are first occupied for low doping rates. The structure modification is also linked to a semiconducting/metal transition of carbon nanotubes observed by resistance measurements and Raman spectroscopy. The second experimental study is devoted to the confinement of oligothiophenes inside single-walled carbon nanotubes. X-Ray diffraction and high resolution transmission electronic microscopy measurements demonstrate the efficiency of our encapsulation process. Several spectroscopic techniques such as UV-Visible and infrared absorptions and Raman diffusion indicate a weak charge transfer between both systems. This result is well evidenced by the profile, intensity and frequency modifications of the high frequency Raman modes. We note the good agreement of these results with the energy renormalisation of phonons discussed in the literature. In addition, some confinement effects depending on carbon nanotubes diameter are pointed out by the study of low frequency Raman modes. Two models are proposed to explain the observed trend. The first one suggests a behavior independent of the nature of the inserted element. In the second one, the number of oligothiophene chains encapsulated in function of carbon nanotubes diameter is considered. We also show a significative influence of carbon nanotube defects on hybrid systems.

Utilizing density functional theory (DFT) the Vienna Ab initio Simulation Package (VASP) was used to calculate the Raman spectra for five single-walled carbon nanotubes (SWCNTs) with chiralities (4,4), (6,6), (8,0), (12,0) and (7,1). The radial breathing mode (RBM), when compared with experimental frequencies, shows good correlation. When compared to RBM:s calculated with tight binding the frequencies calculated with DFT displayed higher accuracy. The precision of G-band frequencies were inconclusive due to lack of experimental data. The frequencies did not agree well with the results from tight-binding theory. The correctness of the Raman activity estimations using results from DFT calculations was found to be questionable. An unknown mode, which was found to be highly Raman active in the calculated spectra of (4,4), (6,6), and possibly (8,0), and (12,0), is also discussed. It was concluded that further calculations on larger tubes, especially armchair tubes are relevant for future studies. Further verification of the determination of Raman activity is also needed. / F7042T - Project in Engineering Physics

No description available.

No description available.

Dans ce manuscrit nous décrivons des études originales sur les propriétés photophysiques des nanotubes de carbone monoparois réalisées à l'échelle de la molécule unique. Nous nous sommes concentrés sur deux problématiques : l'effet du remplissage des nanotubes par de l'eau sur leurs propriétés de photoluminescence (PL) et la création de complexes multi-excitoniques en régime de forte excitation laser. Dans ce but nous avons utilisé une combinaison de microscopie, de spectroscopie et de mesures de déclin de PL. Nos résultats montrent pour des nanotubes de différents diamètres un décalage vers le rouge des énergies d'émission pour les nanotubes remplis d'eau. De plus, des déclins de PL biexponentiels sont obtenus pour des nanotubes individuels (6,4) vides et remplis d'eau. Les temps de déclin caractéristiques de ces deux espèces de nanotubes sont distincts, avec une réduction de la composante courte pour les nanotubes remplis. Ces résultats sont expliqués par une augmentation de la constante diélectrique dans les nanotubes remplis d'eau. Notre résultat le plus conséquent a été l'observation de la génération de trions dans des nanotubes non dopés en utilisant des moyen tout optiques. L'émission du trion apparaît dans les spectres de PL comme une bande latérale décalée vers le rouge. Basé sur nos observations expérimentales, nous proposons le modèle de génération du trion suivant lequel dans un régime multiexcitonique les interactions d'annihilation exciton-exciton créent des porteurs de charge qui sont piégés dans les fluctuations de potentiel électrostatique induites par les inhomogénéités de l'environnement. L'absorption subséquente d'un photon amène à la formation d'un trion localisé sur les charges piégées. / In this dissertation we report on original experimental investigations of the photophysical properties of individual single-walled carbon nanotubes (SWCNTs) at the single molecule level. We focused on two problems: the effect of water-filling nanotubes on their photoluminescence (PL) properties and generation of multi-excitonic complexes in regimes of strong laser excitation. To do so we used a combination of microscopy, PL spectroscopy and PL time decay measurements. Our results show, for different nanotube diameters, a red-shift of the PL emission energy for water-filled nanotubes. Furthermore, biexponential PL time decay behaviors are obtained for individual water-filled and empty (6,4) SWCNTs. The characteristic decay times for both species of nanotubes are distinct, with a reduction of the short component in water-filled SWCNTs. These results are explained by an increase of the dielectric constant for water-filled nanotubes. Our most consequential experimental result was the observation of all optical trion generation in undoped nanotubes. Trion emission appears in the PL spectrum as a red-shifted sideband. Based on our experimental observations, we propose a trion generation model according to which, at a multiexcitonic regime, exciton-exciton annihilation interactions create charge carriers that are transiently trapped at electrostatic potential fluctuations induced by the inhomogeneities of the environment. Subsequent photon absorption leads to trion formation localized at the trapped carriers.