One of the most significant issues in nanocomposite performance is improving the dispersion of carbon nanotubes (CNTs) in thermosetting or thermoplastic polymers in order to gain good mechanical properties. Several studies have investigated the fabrication of nanocomposites based on carbon nanotubes and analysed properties, but there is still insufficient data on their structure-property relationships. This thesis has investigated the central importance of stress transfer Raman studies in epoxy composites reinforced with single-walled carbon nanotubes (SWCNTs), double-walled carbon nanotubes (DWCNTs) and multiwall carbon nanotubes (MWCNTs) to elucidate the reinforcing ability of the CNTs in an epoxy matrix. This project was undertaken to synthesise and characterize MWCNTs and determine the effect of different weight fractions of untreated MWCNTs on the stress transfer efficiency at the MWCNTS / epoxy interface and on the stiffness of the thermomechanical properties of the MWCNTS / epoxy composites. It was undertaken to assess the stress transfer efficiency at the CNT / epoxy interface and at the inter-walls of the CNTs with tensile deformation and with cyclic loading.Optimized conditions of the injection chemical vapour deposition method (CVD), such as long injection times were applied to produce MWCNTs with a high yield, high aspect ratio and well-defined G' Raman peak. The morphology and size of CNTs were observed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) while their thermal stability was examined by Thermogravimetric analysis (TGA). Both Raman spectroscopy and mechanical testing (static and dynamic) were utilized in this study. The Raman spectroscopy research consisted of following the G'-band frequency and linewidth as well as the intensity of radial breathing modes (RBMs) during tensile deformation. The stress-induced Raman shifts in the nanocomposites have been shown to be controlled by the number of carbon nanolayers. A theory has been developed to determine and simulate the stress transfer efficiency parameter, (k_i) for MWCNTs. Tensile tests and dynamic mechanical testing were used to assess the mechanical properties of the nanocomposites.The most obvious finding to be drawn from the present study is that the reinforcement of the epoxy resin with different loadings of MWCNTs is useful, but the best reinforcement was at low loadings of MWCNTs. One of the more significant findings to emerge from this study is that (k_i) between the inner walls of the DWCNTs and MWCNTs are quite similar (~0.7), which suggest that (k_i) may be similar for all CVD MWCNTs and DWCNTs. The second major finding was that there were RBM intensity variations for the SWCNTs and DWCNTs in the hot-cured epoxy composites and that for the DWCNTs both the inner and outer nanotube walls are stressed during deformation

No description available.

No description available.

No description available.

Vor dem Hintergrund zukünftiger Sensoren, basierend auf dem piezoresistiven Effekt von einwandigen Kohlenstoffnanoröhren (SWCNT), werden in dieser Arbeit umfangreiche Ergebnisse zum mechanischen Verhalten von Grenzflächen zwischen SWCNTs und edlen Metallen am Beispiel von Pd und Au präsentiert. Im Fokus steht dabei die Synergie von rechnerischen und experimentellen Methoden Molekulardynamik (MD), nanoskalige Tests und Analytik , um (1) mit guter Genauigkeit maximale Kräfte von gezogenen SWCNTs, welche in Metall eingebettet sind, vorauszuberechnen und (2) einen wertvollen Beitrag zum Verständnis der zu Grunde liegenden Fehlermechanismen zu liefern. Es wurde ein MDModell eines in eine einkristalline Matrix eingebetteten SWCNTs mit Randbedingen eines Auszugsversuchs entwickelt. Mit diesem Modell können Kraft-Weg-Beziehungen und Energieverläufe für einen quasistatischen verschiebungsgesteuerten Auszugsversuch errechnet werden. Das Modell liefert kritische Kräfte bei Versagen des Systems. Des Weiteren können mit diesem Modell der Einfluss des SWCNT-Typus, der Einbettungslänge, der Temperatur, von intrinsischen Defekten und Oberflächengruppen (SFGs) auf das Grenzflächenverhalten untersucht werden. Zum Vergleich wurden kritische Kräfte experimentell durch in situ Auszugsversuche in einem Rasterelektronenmikroskop bestimmt. Es wurde eine sehr gute Übereinstimmung von rechnerischen und experimentellen Daten festgestellt. Der vorherrschende Fehler im Experiment ist der SWCNT-Bruch, jedoch wurden auch einige SWCNT-Auszüge beobachtet. Mit Hilfe der MD-Simulationen wurde gefunden, dass die SFGs als kleine Anker in der umgebenden metallischen Matrix wirken und somit die maximalen Kräfte signifikant erhöhen. Diese Grenzflächenverstärkung kann Zugspannungen verursachen, die genügend hoch sind, so dass SWCNT-Bruch initiert wird. Im Gegensatz dazu zeigten Simulationen von Auszugstests mit idealen SWCNTs nur kleine Auszugskräfte, welche meistens unabhängig von der Einbettungslänge des SWCNTs sind. Dieses Verhalten wird mit einer inkommensurablen Konfiguration der Kristallstrukturen an der Grenzfläche von SWCNTs und der einbettenden Edelmetalle interpretiert. Zur Qualifizierung der Existenz von carboxylatischen Oberflächengruppen auf dem genutzten SWCNT-Material wurden analytische Untersuchungen mittels Fluoreszenzmarkierung von Oberflächengruppen durchgeführt. In Übereinstimmung mit Literaturstellen zum gesicherten Nachweis von SFGs, bedingt durch technologische Behandlungen, weisen diese Experimente stark auf das Vorhandensein von carboxylatischen Oberflächengruppen auf dem genutzten SWCNT-Material hin. Demnach kann der dominante SWCNT-Bruch Fehler durch die Grenzflächenverstärkung auf Grund von SFGs erklärt werden. / In the light of future sensors, that are based upon the piezoresistive effect of singlewalled carbon nanotubes (SWCNTs), this work presents comprehensive results of studies on the mechanical behavior of interfaces between SWCNTs and noble metals using the examples of Pd and Au. With this contribution, the focus is on a synergy between computational and experimental approaches involving molecular dynamics (MD) simulations, nanoscale testing, and analytics (1) to predict to a good degree of accuracy maximum forces of pulled SWCNTs embedded in a noble metal matrix and (2) to provide valuable input to understand the underlying mechanisms of failure. A MD model of a SWCNT embedded in a single crystalline matrix with pull-out test boundary conditions was developed. With this model, force-displacement relations and energy evolutions for a quasi-static displacement controlled test can be computed. The model provides critical forces for failure of the system. Furthermore, the influence of SWCNT type, embedding length, temperature, intrinsic defects and surface functional groups (SFGs) on the interface behavior can be studied using this model. For comparison, critical forces were experimentally determined by conducting pull-out tests in situ, inside a scanning electron microscope. A very good agreement of computational and experimental values was discovered. The dominant failure mode in the experiment was a SWCNT rupture, although several pull-out failures were also observed. From MD simulations, it was found that SFGs act as small anchors in the metal matrix and significantly enhance the maximum forces. This interface reinforcement can lead to tensile stresses sufficiently high to initiate SWCNT rupture. In contrast, pull-out test simulations of ideal SWCNTs show only small pull-out forces, which are mostly independent on SWCNT embedding length. This behavior is interpreted with an incommensurate configuration of crystal structures at the interface between SWCNTs and embedding noble metals. To qualify the existence of carboxylic SFGs on the used SWCNT material, an analytical investigation by means of fluorescence labeling of surface species was performed. In agreement with literature reports on the secured verification of SFGs due to necessary technological treatments, these experiments strongly indicate the presence of carboxylic SFGs on the used SWCNT material. Thus, the dominant SWCNT rupture failure is explained with an interface reinforcement by SFGs.

The thesis is divided into two parts. The first part deals with the research work carried out on the synthesis and chemical modification of nanomaterials whereas the second part describes the preparation and characterisation of polymer films and their use as separation membranes. Part I of the thesis describing the synthetic strategies and chemical manipulation schemes employed on various types of nanomaterials is divided into six chapters. Chapter 1 describes a chemist’s approach towards synthesizing and tuning the properties of different classes of nanomaterials along with a brief account of their potential applications. Chapter 2 of the thesis describes the synthesis and characterization of various metal nanostructures (viz. nanoparticles, nanorods, nanosheets etc.) of nickel, ruthenium, rhodium and iridium using a solvothermal procedure. Chapter 3 deals with the nanoparticles of the novel oxide metal ReO3. ReO3@Au, ReO3@Ag, ReO3@SiO2 and ReO3@TiO2 core-shell nanostructures with ReO3 as the core nanoparticle have been synthesized through a two-step process and characterized. Dependence of the plasmon band of the ReO3 nanoparticles on the interparticle separation has been examined by incorporating the nanoparticles in various polymer matrices and the results compared with those obtained with gold nanoparticles. Chapter 4 presents the dispersion of nanostructures of metal oxides such as TiO2, Fe3O4 and ZnO in solvents of differing polarity (water, DMF and toluene) in the presence of several surfactants. In Chapter 5 of the thesis, fluorous chemical method of separation of metallic and semiconducting single-walled carbon nanotubes is described. This method involves the selective reaction of the diazonium salt of a fluorous aniline with the metallic nanotubes in an aqueous medium and subsequent extraction of the same in a fluorous solvent leaving the semiconducting nanotubes in the aqueous layer. Chapter 6 presents the studies on the interaction of single walled nanotubes and graphene with various halogen molecules (I2, IBr, ICl and Br2) of varying electron affinity probed by employing Raman spectroscopy and electronic absorption spectroscopy. Part II of the thesis describes a general method of fabricating ultrathin free-standing cross-linked polymer films and their subsequent use as separation membranes. A particular class of 1-D nanomaterials namely cadmium hydroxide nanostrands were used in this method throughout, to generate a sacrificial layer upon which the polymer films were generated.

Die vorliegende Dissertation behandelt das Zusammenspiel von effizienten aktiven Lasermedien und neuartigen sättigbaren Absorbern, welche auf den Kohlenstoff-Nanostrukturen Graphen und den einwandigen Kohlenstoff Nanoröhren (SWCNTs) basieren. Die aktiven Lasermedien decken den Spektralbereich von 1,0 Mikrometer bis 2,1 Mikrometer ab, d.h. eine ganze Oktave, und nutzen die laseraktiven Ionen des Ytterbiums, Chroms und Thuliums. In dieser Arbeit werden die auf Graphen und SWCNT basierenden sättigbaren Absorber hinsichtlich ihres einer Anregung folgenden Relaxationsverhaltens, ihrer von der Fluenz abhängigen Transmission und ihres Sättigungs- verhaltens bei hohen Fluenzen untersucht. Eine vorangestellte Einführung der optischen Eigenschaften von Graphen und SWCNTs wird gegeben und die Modelle zur Beschreibung realer Proben werden aus theoretischen Modellvorstellungen hergeleitet. Die sättigbaren Absorber basierend auf Graphen und SWCNTs werden untereinander und mit klassischen halbleitenden sättigbaren Absorbern verglichen. Diese Arbeit zeigt ferner die Erzeugung ultrakurzer Pulse verschiedener Laser mit diesen neuartigen sättigbaren Absorbern basierend auf Kohlenstoff Nanostrukturen. Die erhaltenen Pulse werden mittels Spektrometrie, Autokorrelation, Radiofrequenz- und partiell FROG-Messungen charakterisiert, und der zugrunde liegende Pulsformungsmechanismus, sowie die Stabilität gegen das Güteschalten werden diskutiert. / This thesis addresses the interplay of highly efficient active laser media and novel saturable absorbers based on the carbon nanostructures graphene and single-walled carbon nanotubes (SWCNTs). The active laser media cover the spectral region from 1.0 micron up to 2.1 micron, i.e. a whole octave, and apply ytterbium, chromium and thulium as active lasing ions. Within this work, the saturable absorbers based on SWCNTs and graphene are characterized with respect to their relaxation behaviour after excitation, and with respect to their fluence-dependent transmission and saturation. A precedent introduction of the general optical properties of graphene and SWCNTs is presented as well and the models to describe real samples experimentally are deduced from theoretical model conceptions. The saturable absorbers based on graphene and SWCNTs are compared to each other and to classical semiconducting saturable absorbers. This thesis further presents the generation of ultrashort laser pulses applying these novel carbon nanostructure based saturable absorbers in different lasers. The obtained pulses are characterized by spectrometry, autocorrelation, radio-frequency measurements and partially by FROG measurements. Additionally, the underlying pulse formation process and the Q-switching stability are discussed.

We report on conductance measurements in carbon nanotube based double quantum dots connected to two normal electrodes and a central superconducting finger. By operating our devices as Cooper pair beam splitters, we provide evidence for Crossed Andreev Reflection (CAR). We inject Cooper pairs in the superconducting electrode and measure the differential conductance at both left and right arm. The contacts split the device into two coupled quantum dots. Each of the quantum dots can be tuned by a lateral sidegate. If the two sidegates are tuned such that both quantum dots are at a transmission resonance, a considerable part of the injected Cooper pairs splits into different normal contacts. On the contrary, if only one of the two dots is at resonance, nearly all pairs tunnel to the same normal contact. By comparing different triple points in the double dot stability diagram, we demonstrate the contribution of split Cooper pairs to the total current. In this manner, we are able to extract a splitting efficiency of up to 50% in the resonant case. Carbon Nanotubes ensure ballistic transport and long spin-flip scattering lengths. Due to these properties they are promising candidates to investigate EPR-type correlations in solid state systems.

This thesis presents experimental and related theoretical studies of single layer graphene, bilayer graphene and single walled carbon nanotubes. The thesis is divided into three parts; the first part describes the phonon renormalization due to doping in two dimensional graphene and one dimensional carbon nanotubes. In the recent years, there is a tremendous interest both experimentally and theoretically, in the issues related to electron-phonon coupling in nanotubes and graphene. Theoretically, it is expected that the presence of Kohn anomalies in graphene and metallic nanotubes will result in significant changes in the self energy of phonons due to doping. In particular, with Fermi energy shift how the blockage of phonon decay (due to Pauli Exclusion Principle) into electron-hole excitations changes the phonon frequencies as well as its life time have been studied in details in the first part of the thesis. Since in graphene and metallic nanotubes, the momentum relaxation time of electrons is comparable to the phonon pulsation time, the phonon cannot be treated as a static perturbation and hence non-adiabatic effects are taken into account using time dependent perturbation theory. Electron-phonon coupling constant is also a key parameter to understand the mobility of carrier due to electron scattering by optical phonons at room temperature and limitation of the maximum current carrying capacity of graphene and nanotubes. All these parameters are determined in the first part of the thesis by performing in-situ transport and Raman measurements on graphene and nanotubes based field effect transistors. The second part of the thesis deals with the interaction of bio-molecules (nucleobases) with the nanotubes and graphene. The binding energies of various nucleobases with nanotubes and graphene have been calculated theoretically using quantum chemical and classical force field calculations, and experimentally from isothermal titration (micro) calorimetry. In this part we also present an experimental study on the dynamics of water confined inside the carbon nanotubes. Proton nuclear magnetic resonance studies have been used to probe the freezing and dynamics of the confined water inside 1.4 nm diameter single walled carbon nanotubes. We have observed that the confined water does not freeze up to 223K. The dynamics of confined water has been studied using pulsed field gradient technique. The decay of spin echo intensity as a function of gradient field shows characteristic features of water confined in unidimensional channels. From the decay profiles the mean squared displacement of water molecules is obtained for different diffusive times, showing an unambiguous evidence of single file diffusion of water molecules inside the nanotubes i.e mean squared displacement varying as square root of time. In the last part, we have developed carbon nanotube based vibration sensor and accelerometer to detect the vibrations of liquid and solid, respectively, using the property of voltage generation in nanotubes due to liquid flow.

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal