Novel highly functionalized hybrid organic-inorganic materials were synthesized by polycondensation of bis[3-(trimethoxysilyl)propyl]amine in presence of cationic and anionic surfactants. Reaction media strongly affected gelation time. Thus, in basic media gelation occurred immediately while acid increased gelation time. Material structures were studied by IR spectroscopy, porosimetry, XRD, and SAXS methods. In spite of the absence of an inorganic linker, obtained bridged silsesquioxanes had mesoporous structure. A material prepared in the presence of dodecylamine as a template had higher surface area and narrow pore size distribution while the use of sodium dodecylbenzene sulfate resulted in formation of mesopores with wide size ranges. Accessibility of surface amine groups in silsesquioxanes was studied for molecules of acidic nature and different sizes: HCl, CO2 and picric acid. High contents of accessible amine groups in these materials make them prospective adsorbents for post-combustion CO2 capture.

No description available.

No description available.

No description available.

Les virus sont les entités biologiques les plus abondantes dans les océans (∼1031 particules). Ils colonisent tous les écosystèmes de la planète y compris les environnements extrêmement acides, chauds et salins, environnements où les archées sont les organismes dominants. Les virus infectant les Crenarchées hyperthermophiles présentent des morphologies exceptionnelles et aussi une très faible proportion de gènes possédant des homologues avec de fonction connue. Parmi ces virus, le virus ATV (Acidianus two-Tailed virus), infecte les archées hyperthermophiles du genre Acidianus. ATV a la propriété unique de présenter un important développement structural complètement indépendante de son hôte, à l'extérieur de celui-Ci. Les virions d'ATV développent de longues queues à chaque extrêmité de sa capside, mais seulement à des températures proches de celles de l'habitat de son hôte, 85°C. Le sujet de ma thèse a porté sur l'étude structurale de protéines du virion d'ATV. J'ai résolu la structure cristalline de la protéine ATV-273, qui possède un nouveau fold α/β. J'ai aussi déterminé la forme de l'enveloppe de cette protéine par SAXS. J'ai montré qu'il est possible de placer deux dimères d'ATV-273, observés dans la structure cristalline, dans cette enveloppe. Ce résultat est aussi en accord avec l'état d'oligomérisation en solution déterminé par chromatographie d'exclusion stérique couplée à la diffusion de la lumière. La fonction de cette protéine reste cependant inconnue. / Viruses are the most abundant biological entity in the oceans (∼1031 particles) and remarkably, viruses populate every ecosystem on the planet including the extreme acidic, thermal, and saline environments where archaeal organisms dominate. The viruses infecting hyperthermophilic Crenarchaea revealed exceptional morphologies and also a very low proportion of genes with recognizable functions and homologues. Among these viruses we find ATV (Acidianus two-Tailed virus). ATV is a virus infecting hyperthermophilic archaea of the genus Acidianus, which has the unique property of undergoing a major morphological development outside and independently of the host cell. Virions develop long tails at each pointed end of the initial lemon-Shaped particle, at temperatures close to those of the host natural habitat, 85 °C. The subject of my thesis has focused on the virion proteins of ATV. I have solved the crystal structure of ATV-273 that revealed a new α/β fold. I have also obtained a SAXS envelope where it is possible to fit two crystal dimers, in agreement with the oligomerization state in solution as determined by size-Exclusion chromatography coupled to multi angle light scattering. The function of this protein, however, could be not determined. Moreover, a negative staining electron microscopy model was obtained for the AAA+ ATPase ATV-618, which belongs to the MoxR familiy and presents sequence high similarity with the AAA-ATase RavA from Escherichia coli K12. I have shown that this thermostable AAA-ATPase enzyme assumes a hexameric ring organisation in the presence of ATP.

Eletrônica utilizando polímero em substituição ao silício é uma área de pesquisa recente com perspectivas econômicas promissoras. Compósitos de polímeros com partículas metálicas apresentam interessantes propriedades elétricas, magnéticas e ópticas e têm sido produzidos por uma grande variedade de técnicas. Implantação iônica de metais utilizando plasma é um dos métodos utilizados para obtenção desses compósitos condutores. Neste trabalho é realizada implantação de íons de ouro de baixa energia em PMMA utilizando plasma. O PMMA tem grande importância tecnológica sendo largamente utilizado como resiste em litografias por feixe de elétrons, raios-X, íons e deep-UV. Como resultado da implantação iônica de baixa energia em PMMA há formação de uma camada nanométrica de material condutor. Esse novo material, denominado compósito isolante-condutor, permite criar micro e nanodispositivos através de técnicas largamente utilizadas em microeletrônica. Medidas elétricas são realizadas in situ em função da dose de íons metálicos implantada, o que permite um estudo das propriedades de transporte desses novos materiais, que podem ser modeladas pela teoria da percolação. Simulações utilizando o programa TRIDYN permitem obter a profundidade e o perfil da implantação dos íons. São mostradas caracterizações importantes tais como Microscopia Eletrônica de Transmissão, Microscopia de Varredura por Tunelamento, Espalhamento de Raios-X a Baixos Ângulos, Difração de Raios-X e Espectroscopia UV-vis. Essas técnicas permitem visualizar e investigar o caráter nanoestruturado do compósito metal-polímero. Ainda como parte deste projeto, as camadas condutoras formadas no polímero são caracterizadas quanto à manutenção das suas características de elétron resiste. / Electronics using polymers instead of silicon is a recent research area with promising economic perspectives. Polymer with metallic particles composites presents interesting electrical, magnetic and optical properties and they have been produced by a broad variety of techniques. Metal ion implantation using plasma is one of the used methods to obtain conductor composites. In this work it is performed low energy gold ion implantation in PMMA by using plasma. PMMA has great technological importance once it is broadly used as resist in electron-beam, X-ray, ion and deep UV lithography. As a result of low energy ion implantation in PMMA, a nanometric conducting layer is formed. This new material, named insulator-conductor composite, can allow the creation of micro and nanodevices through well known microelectronics techniques. Electrical measurements are performed in situ as a function of metal ions implanted dose, which allows the investigation of electrical transport of these new materials, which can be modeled by the percolation theory. Simulations using TRIDYN computer code provide the prediction of depth profile of implanted ions. Important characterizations are showed such as Transmission Electron Microscopy, Scanning Tunneling Microscopy, Small Angle X-Ray Scattering, X-Ray Diffraction and UV-vis Spectroscopy. These techniques allow to visualize and to investigate the nanostructured character of the metal-polymer composite. Still as a part of this project, the conducting layers formed are characterized in relation to the maintenance of their characteristics as electron-beam resist.

In dieser Doktorarbeit wird die Hypothese geprüft, ob Osteozyten einen direkten Einfluss auf die Knocheneigenschaften in ihrer unmittelbaren Umgebung haben. Der zentrale Experimentieransatz ist dabei die Korrelation der Organisation des Osteozytennetzwerks mit den Mineraleigenschaften des Knochens auf der Submikrometerebene. Es wird gezeigt, dass bereits die anfängliche Ausrichtung der Osteoblasten entscheidend für die Synthese von hoch ausgerichtetem Knochenmaterial ist. Die dabei entstehenden Osteozytennetzwerke sind so organisiert, dass die Osteozyten und ihre Zellfortsätze jeweils einen möglichst kleinen Abstand zum Knochenmineral haben. Deshalb wird vermutet, dass genau diese Netzwerkorganisation mitentscheidend ist, wie gut die Zellen das Mineral in ih-rer Umgebung beeinflussen können. Messungen der Knochenmineraleigenschaften auf Submikrometerebene mit Röntgenkleinwinkelstreuung bestätigen diese Vermutung. Dabei wird deutlich, dass Knochenmaterial in der Nähe der Osteozyten durch andere Mineraleigenschaften geprägt ist. Um zu klären, wie Osteozyten Mineral in ihrer direkten Umgebung verändern können, werden Mechanismen der passiven Mineralherauslösung aus der mineralisierten Oberfläche des Osteozytennetzwerks untersucht. Es wird gezeigt, dass kalziumarme ionische Lösungen unter physiologischen Bedingungen große Mengen von Kalzium-Ionen aus dem Knochen lösen und diese dann durch die Osteozytennetzwerkstrukturen diffundieren können. Zum Abschluss wurde medullärer Knochen von Hühnern als ein Modellsystem für rasanten Knochenumbau untersucht. Dieser spezielle Knochentyp dient den Hennen als labiles Kalziumreservoir und ermöglicht dadurch die tägliche Eierschalenproduktion. Experimente am medullären Knochen-material zeigen insbesondere die Bedeutung von weniger stabilen Mineralstrukturen die benötigt werden um den Knochen an den schnellen, sich wiederholenden Knochenauf- sowie Abbau optimal anzupassen. / This thesis aims to test the hypothesis whether osteocytes have a direct influence on bone material properties in their vicinity. In this regard, the concomitant ana-lysis of osteocyte network organization and bone ultrastructural properties on the submicron level is the central approach to answer this question. In this work, it is shown that already initial cell-cell alignment during the process of bone formation is crucial for the synthesis of highly organized bone. Furthermore it is proposed that the occurrence of highly ordered osteocyte networks visualized with confocal laser scanning microscopy (CLSM) has a strong impact on the ability of osteocytes to directly influence bone material properties. These highly organized networks are another consequence of initial cell-cell alignment and are found to be arranged such as to feature short mineral cell distances. Examination of sub-micron mineral properties with scanning small angle x-ray scattering (sSAXS) shows that bone material in the direct vicinity of osteocytes and their cell proc-esses shows different mineral properties compared to bone further away in the depth of the tissue. Moreover, mechanisms of passive mineral extraction from the mineralized surface of the osteocyte network, due to the treatment with calcium poor ionic solutions, are investigated. It is shown that this chemical process occurring under physiological conditions leads not only to the dissolution of considerable amounts of calcium, but also to efficient diffusion of these ions through the osteocyte network structures. Finally, medullary bone which is intended as a labile calcium source for daily egg shell formation in hens is used as a model system for rapid bone turnover rates. This bone type in particular indicates the importance of uniquely adapted, less stable mineral structures to fit the requirements for rapid bone resorption as well as reformation.

Cette thèse présente une étude des solutions aqueuses de trois complexes de polyélectrolytes (PECs) modèles. Les PECs résultent de la complexation de deux polyélectrolytes linéaires de charge opposée: un polycation (le PDADMA) et trois polyanions de longueur de persistance non électrostatique distinctes: le polystyrene sulfoné (PSS), le poly(α-méthyl styrène sulfoné) (PαMSS) et l’acide hyaluronique (HA). En plus de l’influence de la rigidité intrinsèque des polyanions sur la formation et la structure des PECs, les effets de la force ionique et de la méthode de préparation des solutions aqueuses de PECs ainsi que l’influence de la concentration des solutions binaires de polyélectrolytes initiales ont également été abordés. Nous suggérons que le processus de complexation entre polycations et polyanions en régimes semidilué et concentré est analogue à une gélification. Il y a toutefois une différence entre les deux complexes qui est reliée à la différence de rigidité intrinsèque. / This PhD thesis presents a study of the aqueous solutions of three model polyelectrolyte complexes (PECs). PECs were formed between hydrophilic and highly charged linear macrocations of poly(diallyldimethyl ammonium) (PDADMA) and linear macroanions of distinct intrinsic persistence lengths: sulfonated polystyrene (PSS), sulfonated poly(α-methyl styrene) (PαMSS) and hyaluronate (HA). In addition to the effect of the macroion stiffness on the PEC formation and structure, those of the ionic strength and the way of preparing the PEC aqueous solutions as well as that of the concentration regimes of the initial PE aqueous solutions were also tackled. We suggest the complexation between macrocations and macroanions in the semidilute and concentrated regimes can be described as a universal gelation process. A difference between PDADMA-PSS and PDADMA-HA complexes is related to the primary self-assembling process and is associated with the distinct structural models for PECs.

Movimentos coletivos prestam um papel fundamental na dinâmica e energética de biomoléculas em solução. Estes movimentos permitem o acoplamento de regiões significativamente distantes, apresentando considerável influência, por exemplo, no alosterismo para a formação de complexos macromoleculares e no funcionamento integrado de proteínas multidomínios como \"máquinas moleculares\". Neste trabalho de doutoramento, serão apresentados os resultados referentes à aplicação conjunta de técnicas experimentais biofísicas, de modelagem estrutural e de dinâmica molecular no estudo de dois sistemas para os quais estes movimentos coletivos demonstram considerável importância funcional. Para a interação do receptor nuclear do ácido 9-cis-retinóico com seu elemento responsivo específico no DNA (HRE), a comparação de estudos de dinâmica molecular com ensaios de afinidade por anisotropia de fluorescência sugere que a resistência inicial para a associação do monômero, seguida da acentuada colaboratividade na associação do dímero é regida por um impedimento da associação do domínio de ligação ao DNA (DBD) para o primeiro à sequência responsiva devido, em última análise, a uma não complementaridade dos modos coletivos mútuos. Este impedimento para a associação monomérica inicial é mais acentuado para o monômero 5\' (para o qual a menor especificidade de ligação à seqüência específica já é bem documentada), devido aos efeitos conjuntos de um \"defeito\" natural no empacotamento de bases da seqüência responsiva, que se manifesta mais significativamente na interface entre o meio-sítio 5\' e a seqüência espaçadora, e dos modos vibracionais entre os dois sítios decorrentes de seu faseamento relativo na topologia do DNA na seqüência responsiva, caracterizando um mecanismo \"chave e fechadura\" para a interação obrigatoriamente simultânea dos dois monômeros ao DNA. No segundo caso, um estudo integrado utilizando a técnica experimental de espalhamento de raios X a baixos ângulos e uma abordagem de modelagem estrutural baseada em dinâmica molecular foi realizado para a celobiohidrolase I de Trichoderma harziannum. Este estudo permitiu tanto a elaboração de um modelo estrutural de maior resolução para esta enzima de alto potencial biotecnológico como a constatação dos possíveis mecanismos moleculares a partir dos quais as glicosilações no peptídeo conector impõem restrições à orientação e modos vibracionais entre seus dois domínios de forma condizente com sua ação concertada na interação e no deslize da enzima sobre a superfície celulósica, ambos de fundamental importância para a processividade da enzima na hidrólise do substrato microcristalino. / Collective motions play a fundamental role in solution biomolecule dynamics and energetics. These movements can couple very distant regions in the protein structures affection, for instance, allosteric mechanisms, the establishment of macromolecular complexes, and on the integrated function of multidomain proteins as molecullar machines. In this thesis, we present results concerning to the joint use of experimental biophysical techniques, structural modeling and molecular dynamics simulations on the study of two systems for which these collective motions have substantial importance. First, we study the interaction of the nuclear retinoid X receptor with its specific DNA hormone response element (HRE) using a combination of molecular dynamics simulations and affinity assays performed by using fluorescence anisotropy. We find out that collective motions mediate the low binding affinity of monomers and the high cooperative binding of HRE dimers. The lower binding affinity of the monomer is more prominent for 5´ monomers. This occur due to an natural ineffective stacking of the last base pair step at the 5´-half-site and to the phasing of the two binding half-sites in the DNA topology, that impose a collective motions that tends to occlude the 5´ binding site. This behavior, in turn, is concurrent with the well known 3´ polarity and the decreased binding specificity to the 5´ half site for the hRXRα monomer. This same pattern impose a lock-and-key mechanisms dependent on the binding of the full dimer. Second, an integrated Small angle X ray scattering and molecular dynamics based structural modeling was used to comprehend the interdomain motions of cellobiohydrolase I of Trichoderma harziannum. We manage to build a refined model for this enzime, with important biotechnological potential. We also provide insights into molecular mechanisms of linker and glycosylation imposed restraints on the orientation and vibrational modes of the full-length enzyme, supporting a mechanism of sliding of on the cellulose surface. This mechanism is fundamental for the high processivity on the hydrolysis of microcrystalline cellulose.

Estudos sistemáticos utilizando a técnica de SAXS foram realizados no síncrotom do LURE (Orsay) com feixe intenso de geometria pontua:, para descrever a cinética e as estruturas obtidas durante as etapas de transformação sol -> gel úmido -> gel seco -> vidros de sílica . As análises foram feitas em termos de uma lei de potência I = q-? cujo expoente está relacionado a dimensão fractal de massa ou de superfície das estruturas. Devido a polidispersividade das unidades espalhadoras as dimensões fractais verificadas podem ser resultados de dimensões reais encobertas por uma distribuição de tamanhos. As curvas obtidas para a cinética de gelificação e envelhecimento dos géis úmidos mostram expoentes que indicam fractalidade de massa e, posteriormente, de superfície. Uma microestrutura composta, que pode resultar de uma agregação limitada por difusão (DLA) seguido de agregação de agregados (C-C) foi observado nas soluções básicas. Por outro lado, os agregados ácidos parecem surgir do crescimento contínuo de cadeias até atingir a interligação com outros agregados com uma cinética que pode ser descrita pelo modelo DLA. No estado de aerogeis outras técnicas como picnometria de mercúrio e hélio, microscopia eletrônica de transmissão e adsorção de gás de nitrogênio, foram também aproveitadas. Nestes materiais encontramos em uma faixa estreita de escala, um expoente indicando fractalidade de massa, embora com superfície lisa. Os resultados estão de acordo com um modelo de estrutura que tem uma matriz de SiO2 densa. A estrutura fractal desaparece durante o tratamento térmico de densificação devido ao rearranjo estrutural. / Systematic SAXS studies have been performed at the LURE synchrotron (Orsay) using an intense beam of point-like cross-section to describe the kinetic and the structure obtained during the sol-> humid gel -> dry gel ->silica glass. The analysis were done in terms of a power law, I = q-? , whose exponent is related to mass and surface fractal dimensions of the structures. Due to polidispersity of the scattering units the found fractal dimensions can be \"smeared\" dimensions that result from a size distribution. All the kinetic and aging humids curves showed evidenced of fractal structures. A composed microstructure that can be originated by clustering of clusters (C-C) of primary units grown by diffusion limited-aggregation (DLA), was observed for basic gels. By other hand, the acidic cluster seems to grow continuously reaching gelation through crosslinking of the clusters. The DLA model seems to describe this process. In the aerogels study others techniques like density measurements using Hg and He, TEM and adsorption of N2 gas were done along with SAXS measurements. Here we could find a narrow range in which the system is a mass fractal, although its surface has been already smoothened. The results agree with a dense SiO2 matrix model. During the densification no fractal structure was verified due to structural rearrangements at high temperature.