Hippocrates predicted many years ago that breath could tell something related with our health. On his treaties, he indicated that when the body starts moving after sleeping, and breathe with more frequency, something hot and acid is expelled with air. It is possible to predict a disease from breath, but it has not been until recent years that last developments in breath analysis has allowed to detect compounds precisely and to associate the presence of these compounds to certain diseases. The use of breath analysis in clinical diagnosis and exposure to contaminants presents great advantages as this is a non-invasive technique, compared with other techniques such as blood or urine analyses. Two new instrumental methodologies have been developed in the present thesis, which are based on adsorbent micro-traps, specifically designed for the analysis of volatile compounds in breath and environmental samples. These equipments are versatile and low cost, compared to other commercially available instrumentations. One of the methodologies developed has been designed for the analysis volatile compounds in breath samples, showing efficiency and resolutions unknown up to know. It has allowed detecting exposure to volatile contaminants in a range of concentrations that the current techniques cannot achieve. The second equipment has been developed for the analysis of the same contaminants in other biological matrixes, in this case blood. It has been used to assess the mechanism followed by the inhaled compounds when entering the human body. These new methodologies were evaluated in different exposure studies. 2,5-dimethylfurean was detected with a high sensitivity and allowed to determine the smoking habits of a wide group of individuals, also 48 hours after smoking. The levels of contamination due environmental tobacco smoke were also evaluated in different environments. The high sensitivity of the developed techniques allowed us to demonstrate the contamination of passive smokers by environmental tobacco smoke (ETS) after few hours of being in contact with. Breath levels of the smoking biomarker after few hours in contact with ETS where at the same level that those found in smokers who smoke few cigarettes per day / Que l’alè ens deia alguna cosa de la nostra salut ja ho va intuir Hipòcrates. Al Tractat Mèdic hi va escriure: “Així, doncs, quan el cos es posa en moviment després de dormir i respira amb més freqüència, quelcom calent i àcid és expulsat amb l’aire. D’això en venen malalties si hom no pren precaucions.” Sí, de l’olor de l’alè s’intuïen malalties però no ha estat fins als darrers anys, que els nous avanços en les tècniques d’anàlisi no han proporcionat els mecanismes adients per detectar els compostos de forma inequívoca i poder associar la seva presència a l’alè a determinades malalties. Tant des d’un punt de vista mèdic com d’exposició a contaminants, el principal avantatge de poder disposar d’una anàlisi d’alè consisteix en la metodologia diagnòstica, que no és invasiva i, per tant, no presenta els inconvenients associats a altres tècniques convencionals, com son l’anàlisi de sang i d’orina. En aquesta tesi s’han desenvolupat dos noves metodologies instrumentals, basades en micro-trampes d’adsorció, especialment dissenyades per a l’anàlisi de compostos volàtils en mostres gasoses, principalment mostres ambientals i mostres d’alè humà. Aquests nous equipaments es caracteritzen per la seva versatilitat i molt baix cost, si es comparen amb els equips comercials actuals. Un dels prototips s’ha dissenyat per a l’anàlisi de mostres d’alè, mostrant una eficàcia i resolució desconeguda fins ara, el que ha permès detectar l’exposició a contaminants volàtils a uns nivells que les tecnologies actuals no permeten assolir. El segon equipament ha estat desenvolupat per permetre analitzar els mateixos contaminants en matrius biològiques, en aquest cas sang, i poder determinar de quina manera i en quin percentatge els compostos que inhalem per exposició arriben a entrar en el cos humà. Aquestes noves metodologies s’han avaluat en diferents estudis d’exposició. S’ha pogut detectar un compost, el 2,5-dimetilfuran, amb una elevada sensibilitat per a la detecció de l’hàbit fumador de les persones, inclús després de més de 48 h d’haver fumat una cigarreta. També s’han estudiat els nivells de contaminació pel fum ambiental del tabac que tenen lloc en diferents ambients (locals de fumadors i no-fumadors). L’elevada sensibilitat de les tècniques desenvolupades ha permès demostrar “in-situ” per primera vegada que els fumadors passius només requereixen unes poques hores de contacte en un ambient contaminat pel fum del tabac per presentar nivells de contaminació a l’alè similars als dels fumadors de poques cigarretes al dia

MnSi(111) films were grown on Si(111) substrates by solid phase epitaxy (SPE) and molecular beam epitaxy (MBE) to determine their magnetic structures. A lattice mismatch of -3.1% causes an in-plane tensile strain in the film, which is partially relaxed by misfit dislocations. A correlation between the thickness dependence of the Curie temperature (TC) and strain is hypothesized to be due to the presence of interstitial defects. The in-plane tensile strain leads to an increase in the unit cell volume that results in an increased TC as large as TC = 45 K compared to TC = 29.5 K for bulk MnSi crystals. The epitaxially induced tensile stress in the MnSi thin films creates an easy-plane uniaxial anisotropy. The magnetoelastic coefficient was obtained from superconducting quantum interference device (SQUID) magnetometry measurements combined with transmission electron microscopy (TEM) and x-ray diffraction (XRD) data. The experimental value agrees with the coefficient determined from density functional calculations, which supports the conclusion that the uniaxial anisotropy originates from the magnetoelastic coupling. Interfacial roughness obscured the magnetic structure of the SPE films, which motivated the search for a better method of film growth. MBE grown films displayed much lower interfacial roughness that enabled a determination of the magnetic structure using SQUID and polarized neutron reflectometry (PNR). Out-of-plane magnetic field measurements on MBE grown MnSi(111) thin films on Si(111) substrates show the formation of a helical conical phase with a wavelength of 2?/Q = 13.9 ± 0.1 nm. The presence of both left-handed and right-handed magnetic chiralities is found to be due to the existence of inversion domains that result from the non-centrosymmetric crystal structure of MnSi. The magnetic frustration created at the domain boundaries explains an observed glassy behaviour in the magnetic response of the films. PNR and SQUID measurements of MnSi thin films performed in an in-plane magnetic field show a complex magnetic behaviour. Experimental results combined with theoretical results obtained from a Dzyaloshinskii model with an added easy-plane uniaxial anisotropy reveals the existence of numerous magnetic modulated states that do not exist in bulk MnSi. It is demonstrated in this thesis that modulated chiral magnetic states can be investigated with epitaxially grown MnSi(111) thin films on insulating Si substrates, which offers opportunities to investigate spin-dependent transport in chiral magnetic heterostructures based on this system.

Les agents anti-infectieux sont utilisés pour traiter ou prévenir les infections chez les humains, les animaux, les insectes et les plantes. L’apparition de traces de ces substances dans les eaux usées, les eaux naturelles et même l’eau potable dans plusieurs pays du monde soulève l’inquiétude de la communauté scientifique surtout à cause de leur activité biologique. Le but de ces travaux de recherche a été d’étudier la présence d’anti-infectieux dans les eaux environnementales contaminées (c.-à-d. eaux usées, eaux naturelles et eau potable) ainsi que de développer de nouvelles méthodes analytiques capables de quantifier et confirmer leur présence dans ces matrices. Une méta-analyse sur l’occurrence des anti-infectieux dans les eaux environnementales contaminées a démontré qu’au moins 68 composés et 10 de leurs produits de transformation ont été quantifiés à ce jour. Les concentrations environnementales varient entre 0.1 ng/L et 1 mg/L, selon le composé, la matrice et la source de contamination. D’après cette étude, les effets nuisibles des anti-infectieux sur le biote aquatique sont possibles et ces substances peuvent aussi avoir un effet indirect sur la santé humaine à cause de sa possible contribution à la dissémination de la résistance aux anti-infecteiux chez les bactéries. Les premiers tests préliminaires de développement d’une méthode de détermination des anti-infectieux dans les eaux usées ont montré les difficultés à surmonter lors de l’extraction sur phase solide (SPE) ainsi que l’importance de la sélectivité du détecteur. On a décrit une nouvelle méthode de quantification des anti-infectieux utilisant la SPE en tandem dans le mode manuel et la chromatographie liquide couplée à la spectrométrie de masse en tandem (LC-MS/MS). Les six anti-infectieux ciblés (sulfaméthoxazole, triméthoprime, ciprofloxacin, levofloxacin, clarithromycin et azithromycin) ont été quantifiés à des concentrations entre 39 et 276 ng/L dans les échantillons d’affluent et d’effluent provenant d’une station d’épuration appliquant un traitement primaire et physico- chimique. Les concentrations retrouvées dans les effluents indiquent que la masse moyenne totale de ces substances, déversées hebdomadairement dans le fleuve St. Laurent, était de ~ 2 kg. En vue de réduire le temps total d’analyse et simplifier les manipulations, on a travaillé sur une nouvelle méthode de SPE couplée-LC-MS/MS. Cette méthode a utilisé une technique de permutation de colonnes pour préconcentrer 1.00 mL d’échantillon dans une colonne de SPE couplée. La performance analytique de la méthode a permis la quantification des six anti-infectieux dans les eaux usées municipales et les limites de détection étaient du même ordre de grandeur (13-60 ng/L) que les méthodes basées sur la SPE manuelle. Ensuite, l’application des colonnes de SPE couplée de chromatographie à débit turbulent pour la préconcentration de six anti-infectieux dans les eaux usées a été explorée pour diminuer les effets de matrice. Les résultats obtenus ont indiqué que ces colonnes sont une solution de réchange intéressante aux colonnes de SPE couplée traditionnelles. Finalement, en vue de permettre l’analyse des anti-infectieux dans les eaux de surface et l’eau potable, une méthode SPE couplée-LC-MS/MS utilisant des injections de grand volume (10 mL) a été développée. Le volume de fuite de plusieurs colonnes de SPE couplée a été estimé et la colonne ayant la meilleure rétention a été choisie. Les limites de détection et de confirmation de la méthode ont été entre 1 à 6 ng/L. L’analyse des échantillons réels a démontré que la concentration des trois anti-infectieux ciblés (sulfaméthoxazole, triméthoprime et clarithromycine) était au dessous de la limite de détection de la méthode. La mesure des masses exactes par spectrométrie de masse à temps d’envol et les spectres des ions produits utilisant une pente d’énergie de collision inverse dans un spectromètre de masse à triple quadripôle ont été explorés comme des méthodes de confirmation possibles. / Anti-infectives are used to treat or prevent infections in humans, animals, insects and plants. The occurrence of traces of these substances in wastewaters, natural waters and even drinking water has caused concern among the scientific community especially because of their biological activiy. The goal of this research was to study the occurrence of anti-infectives in contaminated environmental waters (wastewaters, natural waters, and drinking water) and to develop new analytical methods able to quantitate and confirm their presence in these matrices. A meta-analysis on the occurrence of anti-infectives in contaminated environmental waters demonstrated that at least 68 parent compounds and 10 transformation products have been quantified to date. Environmental concentrations vary between 0.1 ng/L and 1 mg/L depending on the compound, the matrix and the source of contamination. According to this study, detrimental effects of anti-infectives on aquatic biota are possible and these substances could also affect indirectly human health because of their possible contribution to the dissemination of antibiotic resistance in bacteria. Preliminary tests on the development of a method of determination of anti-infectives in wastewaters showed the main difficulties to overcome during solid-phase extraction (SPE) as well as the importance of the detector selectivity. A novel method of determination of anti-infectives was described using off-line tandem SPE and liquid chromatography-tandem mass spectrometry (LC-MS/MS). Six target anti-infectives (sulfamethoxazole, trimethoprim, ciprofloxacin, levofloxacin, clarithromycin and azithromycine) were quantitated at concentrations between 39 and 276 ng/L in samples of influent and effluent collected from a primary and physico-chemical wastewater treatement plant. Reported effluent concentrations indicate that the mean mass of these substances discharged daily in the St. Lawrence River was ~ 2 kg. In order to reduce total analysis time and simplify sample preparation, a new on-line SPE-LC-MS/MS was presented. This method used a column-switching technique to preconcentrate 1.00 mL of sample in an on-line SPE column. Method analytical performance allowed the quantitation of six anti-infectives in municipal wastewaters and limits of detection were of the same magnitude (13-60 ng/L) than methods based in offline SPE. Next, the application of turbulent flow chromatography on-line SPE columns for the preconcentration of six anti-infectives in wastewaters was explored. Results showed that these columns are an interesting alternative to traditional on-line SPE columns. Finally, in order to allow analysis of anti-infectives in surface and drinking water, we developed an on-line SPE-LC-MS/MS method using large-volume injections (10 mL). Breakthrough volumes of several on-line SPE columns were estimated and the column having the best retention, Strata-X, was chosen. Method detection and confirmation limits were between 1 and 6 ng/L. Analysis of real samples indicated that the concentration of the three target anti-infectives (sulfamethoxazole, trimethoprim and clarithromycin) was lower that the method detection limits. Accurate mass measurement by time-of-flight mass spectrometry and product ion spectra obtained by a reversed-energy ramp in a triple quadrupole mass spectrometer were explored as alternative confirmation methods.

Submitted by MARCOS HENRIQUE PEREIRA WONDRACEK null (marcoswondracek@ufgd.edu.br) on 2017-10-29T05:42:20Z No. of bitstreams: 1 TESE - versão final.pdf: 3488966 bytes, checksum: 44030b3422f6b77b9ba441eb0905cb23 (MD5) / Approved for entry into archive by LUIZA DE MENEZES ROMANETTO (luizamenezes@reitoria.unesp.br) on 2017-11-09T13:58:32Z (GMT) No. of bitstreams: 1 wondracek_mhp_dr_araiq.pdf: 3488966 bytes, checksum: 44030b3422f6b77b9ba441eb0905cb23 (MD5) / Made available in DSpace on 2017-11-09T13:58:32Z (GMT). No. of bitstreams: 1 wondracek_mhp_dr_araiq.pdf: 3488966 bytes, checksum: 44030b3422f6b77b9ba441eb0905cb23 (MD5) Previous issue date: 2017-10-05 / Item merged in doublecheck by Monique Sasaki (sayumi_sasaki@hotmail.com) on 2017-12-07T17:59:08Z Item was identical to item(s): 153113, 153193 at handle(s): http://hdl.handle.net/11449/152063, http://hdl.handle.net/11449/152164 / Este trabalho relata o desenvolvido de métodos analíticos que visa à determinação de algumas espécies tóxicas e potencialmente tóxicas de metais e metalóides em níveis ultra-traço em amostra de água naturais, utilizando uma técnica analítica menos sensível, como a espectrometria de absorção atômica em chama (FAAS). Essa técnica foi escolhida por ser relativamente simples e possuir baixo custo operacional. A técnica de extração em fase sólida (EFS), utilizando um novo material sorvente, foi utilizada para separar e pré-concentrar os analitos. Este estudo demonstra o procedimento de uma nova rota sintética via co-condensação visando à produção de uma sílica mesoporosa organofuncionalizada com o ligante 4-amino-3-hidrazino-5-mercapto-1,2,4-triazole e, sua utilização como sorvente para pré-concentração/análise de especiação de íons metálicos em amostras de água. O material produzido foi caracterizado por espectroscopia na região do infravermelho (FTIR), BET, ressonância magnética nuclear (RMN) de 29Si e 13C, dentre outras. As características adsortivas desse material foram estabelecidas em estudos de batelada, onde se estudou o efeito do pH, cinética de adsorção e capacidade máxima de adsorção. A otimização multivariada foi utilizada para obtenção das melhores condições químicas e de fluxo no sistema de pré-concentração, permitindo avaliar as interações principais e secundárias entre os fatores. Por meio da análise dos espectros obtidos por FTIR foi possível observar bandas de estiramento C–H, C–Cl e (NH2) oriundos da fração orgânica do material. A área superficial foi de 369,84 m2 g-1com diâmetro médio de poros em 7,1 nm, relacionados a materiais mesoporosos. Os resultados obtidos por RMN de 29Si comprovam a formação do material híbrido, sintetizado por co-condensação, e o RMN de 13C confirma o ancoramento do ligante na matriz. O pH que favorece a adsorção dos íons foi 5,0 para Cu(II) e 3,0 para Cd(II) e As(V). O modelo cinético de pseudo segunda ordem apresentou melhor ajuste aos dados experimentais, indicando adsorção química. Os dados de sorção desses íons metálicos mostraram bom ajuste ao modelo de Langmuir, com capacidade máxima de adsorção próxima aos valores obtidos experimentalmente, 0,057, 0,018 e 0,060 mmol g-1 para Cu(II), Cd(II) e As(V), respectivamente, indicando que a sorção ocorre em monocamada. Os parâmetros analíticos encontrados para o Cu(II) foram: fator de pré-concentração de 18,1; intervalo linear de 10,0 – 200,0 µg L-1 (R = 0,999) e LD de 1,45 µg L-1. Para o Cd(II): fator de pré-concentração de 15,8; intervalo linear de 2,0 – 100,0 µg L-1 (R = 0,999) e LD de 0,38 µg L-1. Para o As(V): fator de pré-concentração de 5,0; intervalo linear de 0,25 – 2,5 µg L-1 (R = 0,999) e LD de 0,039 µg L-1. A exatidão foi checada pelo método de adição e recuperação e/ou método comparativo com GFAAS ou ICP OES. As recuperações variaram de 97 – 106% (Cu), 100 – 105% (Cd), 88 – 103% (As(V)) e 96 – 106% (As(total)). Os resultados para Cu(II) determinados com os métodos propostos foram concordantes com os obtidos com o método comparativo. Conclui-se que o material produzido apresenta bom potencial para ser aplicado na extração/pré-concentração de cobre, cádmio e análise de especiação inorgânica de arsênio. Provou-se também que baixos limites de detecção e quantificação podem ser obtidos mesmo utilizando uma técnica menos sensível como a FAAS. / This paper reports on the development of analytical methods for the determination of some toxic and potentially toxic species in ultra - trace levels in natural water samples using a less sensitive analytical technique such as flame atomic absorpti on spectrometry (FAAS). This technique was chosen because it is relatively simple and has a low operating cost. The solid phase extraction technique (SPE) using a new sorbent material was used to separate and preconcentrate the analyte. This study demonstr ates the procedure of a new synthetic route using the technique of the co - condensation for the production of a mesoporous organo - functionalised silica with the 4 - amino - 3 - hydrazino - 5 - mercapto - 1,2,4 - triazole ligant and its use as a sorbent for preconcentrati on/ analysis of metal ion s speciation in water samples. The material produced was characterized by infra - red spectroscopy (FTIR), BET, 29 Si and 13 C nuclear magnetic resonance (NMR), among others. The adsorptive characteristics of this material were establis hed in batch studies, where the effect of pH, adsorption kinetics and maximum adsorption capacity were studied. Multivariate optimization was used to obtain the best chemical and flow conditions in the preconcentration system, allowing the evaluation of th e main and secondary interactions among the factors. By means of the analysis of the spectra obtained by FTIR, it was possible to observe C - H, C - Cl and (NH 2 ) stretch bands from the organic fraction of the material. The surface area was 369.84 m 2 g - 1 with a verage pore diameter at 7.1 nm related to mesoporous materials. The results obtained by 29 Si NMR prove the formation of the hybrid material, synthesized by co - condensation, and the 13 C NMR confirms the anchoring of the ligan t in the matrix. The pH 5.0 it w as favors the adsorption of the ions Cu (II), the pH 3.0 it was favors the adsorption of the Cd (II) and As (V). The kinetic model of pseudo second order showed better adjustment to the experimental data, indicating chemical adsorption. The adsorption data of Cu (II), Cd (II), and As (V) were similar to those of the Langmuir model, with a maximum adsorption capacity of 0.057, 0.018 and 0.060 mmol g - 1 for Cu (II), Cd(III) and As(V) , respectively, indicating that the sorption occurs in monolayer. The analyt ical parameters for Cu (II) were: preconcentration factor of 18.1; linear range of 10.0 - 200.0 μg L - 1 (R = 0.999) and LD of 1.45 μg L - 1 . For Cd (II): preconcentration factor of 15.8; linear range of 2.0 - 100.0 μg L - 1 (R = 0.999) and LD of 0.38 μg L - 1 . Fo r As (V): preconcentration factor of 5.0; linear range of 0.25 - 2.5 μg L - 1 (R = 0.999) and LD of 0.039 μg L - 1 . Accuracy was checked by addi tion and recovery method of the standard and/ or comparative method with GFAAS or ICP OES. The recovery ranged from 97 - 106% Cu(II), 100 - 105% Cd (II), 88 - 103% As (V) and 96 - 106% As (total)). The results for Cu (II) determined with the proposed methods were concordant with those obtained with the comparative. It is concluded that the material produced can be successfully applied in the extraction / preconcentration of copper, cadmium and analysis of inorganic speciation of arsenic and low limits of detection and quantification can be obtained even using a less sensitive technique such as FAAS.

No description available.

This master thesis deals with the development, optimization and validation of an analytical method for determination of neurotoxin -N-methylamino-L-alanine in pond water and cyanobacteria using LC/MS. Firstly, basic parameters of the analytical method developed within authors´s bachelor thesis were verified. Following parameters were selected for verification: selection of suitable MRM transitions, voltage applied to S-lens and F-lens and standardized collision energy. Secondly, the system suitability testing was performed. Thirdly, the analytical method was successfully validated. Then, the testing and optimization of solid phase extraction for analysis of water samples were carried out. The pH of sample solution and composition of elution solution were chosen for the optimization. In addition, the trichloroacetic acid extraction with acid hydrolysis for cyanobacterial samples was carried out too. Finally, both solid phase extraction and trichloroacetic acid extraction were evaluated and applied to the analysis of real samples.

Submitted by ANA KARLA PEREIRA RODRIGUES (anakarla_@hotmail.com) on 2017-07-31T12:10:23Z No. of bitstreams: 1 arquivototal.pdf: 5468289 bytes, checksum: dc45efa53e8cc6251d00164b611309f9 (MD5) / Made available in DSpace on 2017-07-31T12:10:23Z (GMT). No. of bitstreams: 1 arquivototal.pdf: 5468289 bytes, checksum: dc45efa53e8cc6251d00164b611309f9 (MD5) Previous issue date: 2016-05-25 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES / In the last decade, the extraction magnetic solid phase (MSPE) has been intense study target in Analytical Chemistry, mainly because of its potential application in sample preparation. Recently, with the development motivation automatic analytical methods, this technique has been combined with flow systems. However, the synergistic integration of MSPE with these systems is still a challenge, especially when it involves the handling of viscous matrices. In this perspective, this thesis proposes the development of an effective automated method to perform the MSPE in aqueous and oily matrices. For be applied as magnetic adsorbent nanoparticles of Fe3O4 coated with alumina and functionalized with sodium dodecyl sulfate (SDS) and 1-(2-pyridylazo)-2-naphthol (PAN) were synthesized. The nanoparticles were characterized by diffraction analysis X-ray and scanning electron microscopy, where it was confirmed that the method used to obtain the particles was adequate. Secondly, the automatic system to run the MSPE was developed. To this end an extraction chamber was made of Teflon with a quartz window on the side, where all steps of MSPE was performed without the need for any auxiliary apparatus for immobilizing the adsorbent. For generating the magnetic field in the extraction chamber, a robotic device has been developed. After these steps, the applicability of the method was demonstrated in the extraction and preconcentration of Cd and Pb in drinking water samples and Cd in edible oils, using as detection atomic absorption spectrometry graphite furnace. Factors affecting MSPE, such as pH, the amount of adsorbent, the type and concentration of the eluent and the elution time were studied. In the best experimental conditions to the sample water, the detection limit was 0.004, and 0.043 ug L-1 for Cd and Pb, respectively. Even in this array, relative standard deviations less than 3.5% were achieved with a 15-fold enrichment factor for both analytes. In the case of determination of Cd in edible oils, detection limit (0.006 ug L-1) and standard deviation (< 3.3%) was obtained satisfactorily with a 9-fold enrichment factor. Interfering studies have been performed successfully for the two determinations, not revealing significant percentage interference in determinations. The developed automatic method is simple and robust since it does not require immobilization of the adsorbent, and was successfully applied in the determination of Cd and Pb in drinking water samples and Cd in edible oils. / Na última década, a extração em fase sólida magnética (MSPE) tem sido alvo de intenso estudo na Química Analítica, principalmente em virtude do seu potencial de aplicação no preparo de amostras. Recentemente, tendo como motivação o desenvolvimento de métodos analíticos automáticos, essa técnica vem sendo combinada aos sistemas em fluxo. Contudo, a integração sinérgica da MSPE com esses sistemas ainda é um desafio, principalmente quando envolve a manipulação de matrizes viscosas. Nessa perspectiva, a presente tese propõe o desenvolvimento de um eficiente método automático para realização da MSPE em matrizes aquosas e oleosas. Para serem aplicadas como adsorvente magnético foram sintetizadas nanopartículas de Fe3O4 revestidas com alumina e funcionalizadas com dodecil sulfato de sódio (SDS) e 1-(2-piridilazo)-2-naftol (PAN). As nanopartículas foram caracterizadas através da análise de difratometria de raios-X e da microscopia eletrônica de varredura, onde confirmou-se que o método empregado para obtenção das partículas foi adequado. Num segundo momento, o sistema automático para executar a MSPE foi desenvolvido. Para isso, uma câmara de extração foi confeccionada em Teflon, com uma janela de quartzo na lateral, onde todos os passos da MSPE foram realizados sem a necessidade de qualquer aparato auxiliar para imobilizar o adsorvente. Para geração do campo magnético, na câmara de extração, um dispositivo robótico foi desenvolvido. Depois de estabelecida essas etapas, a aplicabilidade do método foi demonstrada na extração e preconcentração de Cd e Pb em amostras de água de abastecimento e de Cd em óleos comestíveis, empregando como detecção a espectrometria de absorção atômica em forno de grafite. Fatores que afetam a MSPE, tais como o pH, a quantidade de adsorvente, o tipo e a concentração do eluente e o tempo de eluição foram estudados. Nas melhores condições experimentais, para a amostra água, o limite de detecção foi 0,004 e 0,043 μg L-1 para o Cd e o Pb, respectivamente. Ainda nessa matriz, desvios padrão relativos menores que 3,5 % foram alcançados com um fator de enriquecimento de 15 vezes para ambos os analitos. No caso da determinação de Cd em óleos comestíveis, limite de detecção (0,006 μg L-1) e desvio padrão relativo (< 3,3 %) satisfatório foi obtido com um fator de enriquecimento de 9 vezes. Os estudos de interferentes foram realizados com êxito para as duas determinações, não revelando interferência percentual significativa nas determinações. O método automático desenvolvido é simples e robusto, uma vez que não requer a imobilização do adsorvente, e foi aplicado com sucesso na determinação de Cd e Pb em amostras de água de abastecimento e de Cd em óleos comestíveis.

Along with proteins, a myriad of different molecular biomarkers, such as post-translational modifications and autoantibodies, could be used in an attempt to improve disease detection and progression. In this thesis, I build on several iterations of the proximity ligation assay to develop and apply new adaptable methods to facilitate detection of proteins, autoantibodies and post-translational modifications. In paper I, we present an adaptation of the solid-phase proximity ligation assay (SP-PLA) for the detection of post-translational modification of proteins (PTMs). The assay was adapted for the detection of two of the most commons PTMs present in proteins, glycosylation and phosphorylation, offering the encouraging prospect of using detection of PTMs in a diagnostic or prognostic capacity.  In paper II, we developed a variant of the proximity ligation assay using micro titer plate for detection and quantification of protein using optical density as readout in the fluorometer, termed PLARCA. With a detection limit considerably lower than ELISA, PLARCA detected femtomolar levels of these proteins in patient samples. In paper III, we aim to compare detection values of samples collected from earlobe capillary, venous plasma, as well as capillary plasma stored in dried plasma spots (DPS) assessed with a 92-plex inflammation panel using multiplex proximity extension assay (PEA). Despite the high variability in protein measurements between the three sample sources, we were able to conclude that earlobe capillary sampling is a suitable less invasive alternative, to venipuncture. In paper IV, we describe the application of PLARCA and proximity extension assay (PEA) for the detection of GAD65 autoantibodies (GADA). Thus, offering highly sensitive and specific autoimmunity detection.

This diploma work is aimed determination of strobilurine pesticide in barly, malt and berr. Identifikation of strobilurine was made according to mass spectra library and base of commercialy standard. The next quantifikation in samples was made. The work consist of three main parts refer about problems. In therotical part is the method of plant, grown protection. This part is about pesticides and their fission, history and effects. In experimental part is method for determination strobilurine. In part results and discussion are all result and data in tables a graphs. At the end is sumed up result this work.

The theoretical part of this diploma thesis consists of current matters regarding the presence of perfluorinated organic compounds in living environment elements. The attention has been focused on perfluoroktanoic acid (PFOA), (PFOS), and (FOSA). Physical-chemical characteristics of these organic pollutants and their toxicological and environmental aspects have been described. Possible ways of the pollutants analytical determination have been specified. The experimental part has explored effects of extraction techniques (sonication, pressurized solvent extraction, solid-phase extraction) used for PFAS separation from seats of fire soil sample. Identification of the analytes have been achieved by liquid chromatography/mass spektrometry.