<p>A paper that shows motion when being exposed to heat has in this study been called a paper muscle. A paper muscle can be used for many different applications, e.g. smart advertisement or indicators in printed paper products. The muscles created in the present work were prepared by gluing or printing a polymer layer onto paper. The polymer layers consisted of MELINEX, MYLAR or toner, which are known to expand when exposed to heat. Furthermore, all three material systems showed bending when exposed to heat.</p><p>A mechanical bilayer model was implemented and used to quantitatively study the parameters that influence the bending of the muscles. The model indicated that the dimensional changes of the polymer layers relative to that of the copy paper was found to be approximately 0,1-0,5 % within the temperature range 23-60 °C. The experiments showed that the combined dimensional changes within the polymer and paper layers were not linear with respect to temperature, and that there was a significant difference in bending for muscles cut in the MD and in the CD. Also, when assuming that the polymer is the active component, the observed coefficient of thermal expansion was a factor ~10 greater compared to published literature data. These findings led to the conclusion that it was indeed the dimensional changes within the paper that were the dominant cause of the bending. This was confirmed by a muscle, comprising a bilayer of paper cut in the MD and the CD, which bended when exposed to heat. The results also indicate that a large part of the bending could be attributed to the hygrocontraction of paper.</p>

Several analytical mean field models are presented for the class of stimuli responsive polymers that are driven by the lower critical solution temperature (LCST) transition. For solutions above the polymer crossover concentration, a hybrid model combines lattice-fluid excluded volume and van-der-Waals interactions with a combinatorial approach for the statistics of hydrogen bonding, hydration, and ionic bonding. This approach yields models for the LCST of both neutral polymers and lightly charged polyelectrolytes in aqueous salt solution. The results are shown to be in semi-quantitative agreement with experimental data for the cloud point of polyethylene oxide (PEO) in aqueous solution with various salts, and some aspects of the lyotropic series are reproduced. Results for lightly charged polyelectrolytes are compared to and shown to be in qualitative agreement with aspects of experimentally observed behavior. Finally, a framework is established for extension of these models to further aspects of the lyotropic series and polyelectrolyte behavior. At the nanoscale, lattice fluid (LF) and scaled particle theory (SPT) approaches are employed to model the LCST-related coil-globule-transition (CGT) of isolated polymer chains in highly dilute solution. The predicted CGT behavior semi-quantitatively correlates with experimental results for several polymer-solvent systems and over a range of pressures. Both the LF and SPT models exhibit a heating induced coil-to-globule transition (HCGT) temperature that increases with pressure until it merges with a cooling induced coil-to-globule transition (CCGT). The point at which the CCGT and HCGT meet is a hypercritical point that also corresponds to a merging of the lower critical and upper critical solution temperatures. Theoretical results are discussed in terms of a generalized polymer/solvent phase diagram that possesses three hypercritical points. Within the lattice model, a dimensionless transition temperature [author gives mathematical symbol] is given for a long chain simply by the equation [author gives mathematical equation], where [part of the equation] is the bulk solvent occupied volume fraction at the transition temperature. Furthermore, there is a critical value of the ratio of polymer to solvent S-L characteristic temperature below which no HCGT transition is predicted for an infinite chain. / text

A paper that shows motion when being exposed to heat has in this study been called a paper muscle. A paper muscle can be used for many different applications, e.g. smart advertisement or indicators in printed paper products. The muscles created in the present work were prepared by gluing or printing a polymer layer onto paper. The polymer layers consisted of MELINEX, MYLAR or toner, which are known to expand when exposed to heat. Furthermore, all three material systems showed bending when exposed to heat. A mechanical bilayer model was implemented and used to quantitatively study the parameters that influence the bending of the muscles. The model indicated that the dimensional changes of the polymer layers relative to that of the copy paper was found to be approximately 0,1-0,5 % within the temperature range 23-60 °C. The experiments showed that the combined dimensional changes within the polymer and paper layers were not linear with respect to temperature, and that there was a significant difference in bending for muscles cut in the MD and in the CD. Also, when assuming that the polymer is the active component, the observed coefficient of thermal expansion was a factor ~10 greater compared to published literature data. These findings led to the conclusion that it was indeed the dimensional changes within the paper that were the dominant cause of the bending. This was confirmed by a muscle, comprising a bilayer of paper cut in the MD and the CD, which bended when exposed to heat. The results also indicate that a large part of the bending could be attributed to the hygrocontraction of paper.

<p>The fascinating optical properties of metallic nanostructures, dominated by collective oscillations of free electrons known as plasmons, open new opportunities for the development of devices fabrication based on noble metal nanoparticle composite materials. This thesis demonstrates a low-cost and versatile technique to produce stimuli-responsive ultrafast plasmonic nanostructures with reversible tunable optical properties. Albeit challenging, further control using thermal external stimuli to tune the local environment of gold nanoparticles embedded in VO2 host matrix would be ideal for the design of responsive functional nanocomposites. We prepared Au-VO2 nanocomposite thin films by the inverted cylindrical reactive magnetron sputtering (ICMS) known as hollow cathode magnetron sputtering for the first time and report the reversible tuning of surface plasmon resonance of Au nanoparticles by only adjusting the external temperature stimuli. The structural, morphological, interfacial analysis and optical properties of the optimized nanostructures have been studied. ICMS has been attracting much attention for its enclosed geometry and its ability to deposit on large area, uniform coating of smart nanocomposites at high deposition rate. Before achieving the aforementioned goals, a systematic study and optimization process of VO2 host matrix has been done by studying the influence of deposition parameters on the structural, morphological and optical switching properties of VO2 thin films. A reversible thermal tunability of the optical/dielectric constants of VO2 thin films by spectroscopic ellipsometry has been intensively also studied in order to bring more insights about the shift of the plasmon of gold nanoparticles imbedded in VO2 host matrix.</p>

A polymer brush is formed by densely grafting the chain ends of polymers onto a surface. This tethering of the long macromolecules has considerable influence on the surface properties, which can be additionally modified by changing the environmental conditions. In this context it is of special interest to understand and control the behavior of the grafted layer and to create surfaces that display a desired response to external stimulation. The present work studies densely grafted polymer brushes and the effects that such an environment imposes on an individual chain molecule in the grafted layer. For this purpose we developed a new self-consistent field approach to describe mixtures of heterogeneous chains comprised of differently sized hard spheres. Applying this method to the case of polymer brushes we consider a fraction of grafted molecules to be different from the majority brush chains. The modification of these chains includes a variation in the degree of polymerization, a different solvent selectivity behavior and a variable size of the free end-monomer. Due to the computational efficiency of the present approach, as compared for example to direct simulation methods, we can study the conformations of the modified 'guest' chains systematically in dependence of the relevant parameters. With respect to brush profile and the distribution of the free chain ends the new method shows very good quantitative agreement with corresponding simulation results. We also confirm the observation that these 'guest' chains can undergo a conformational transition depending on the type of modification and the solvent quality. For the cases studied in the present work we analyze the conditions to achieve a most sensitive behavior of this conformational switching. In addition, an analytical model is proposed to describe this effect. We compare its predictions to the numerical results and find good agreement.

Ce travail avait pour but de développer un nouveau type de matériaux basés sur des complexes polyelectrolytes. Ces matériaux ont été obtenus par l’ultracentrifugation des complexes soit d’origine naturelle ou soit d’origine synthétique. Le système de polyélectrolytes ainsi que les conditions dans lesquelles ces matériaux peuvent être obtenus, suivi par le choix du système optimal pour des études complémentaires ont été décrits. PAA / PAH CoPECs a été choisi comme systèmes modèles de synthèse et ses propriétés physico chimiques (composition, structure et les propriétés mécaniques) ont été décrits ici en détails. Nous avons montré que les propriétés de la composition, la structure et mécanique de le PAA/PAH CoPECs peut être contrôlée en modifiant les conditions d’assemblage (pH, concentration des polyélectrolytes, [NaCl], la vitesse et la commande de l’addition). Également, les conditions environnementales ([NaCl] et pH) ont également été utilisés pour contrôler la taille des pores et porosité des PAA/PAH CoPECs . Enfin, leur capacité à servir de support pour l’immobilisation d’enzymes a également été étudiée. Nous avons optimise les conditions d’assemblage afin de maintenir le maximum quantité de l’enzyme dans le complexe. Nous avons également démontré que CoPECs fournit la stabilisation à long terme, ainsi que la protection de l’enzyme à des températures élevées. Ainsi, PAA / PAH CoPECs sont des candidats potentiels pour être utilisé comme des supports pour l’ingénierie tissulaire et pour l’immobilisation d’enzymes. / This work was aimed to the develop of a new kind of materials of polyelectrolytes complexes. These materials were obtained by the ultracentrifugation of complexes either of natural or synthetic origin. The polyelectrolytes systems as well as the conditions under which these materials could be obtained, followed by the selection of the optimal system to further studies was described. PAA/PAH CoPECs was chosen as synthetic model systems and its physiochemical properties (composition, structure and mechanical properties) were here deeply described. We demonstrated that the composition, structure and mechanical properties can be controlled by changing the assembly conditions (pH, concentration of the polyelectrolytes, [NaCl], speed and order of addition). Moreover, the environmental conditions ([NaCl] and pH) were also used to control the porosity and pores size of the PAA/PAH CoPECs. Finally their ability to serve as scaffold for enzyme immobilization was also studied. We optimized the assembly conditions to keep the maximum of the activity. We also demonstrated that the CoPECs structure provides the stabilization in long term as well as the protection of the enzyme from high temperature. Thus, PAA/PAH CoPECs is a potential and suitable candidates as scaffold for tissue engineering and for the immobilization of enzymes.

Philosophiae Doctor - PhD / The fascinating optical properties of metallic nanostructures, dominated by collective oscillations of free electrons known as plasmons, open new opportunities for the development of devices fabrication based on noble metal nanoparticle composite materials. This thesis demonstrates a low-cost and versatile technique to produce stimuli-responsive ultrafast plasmonic nanostructures with reversible tunable optical properties. Albeit challenging, further control using thermal external stimuli to tune the local environment of gold nanoparticles embedded in VO2 host matrix would be ideal for the design of responsive functional nanocomposites. We prepared Au-VO2 nanocomposite thin films by the inverted cylindrical reactive magnetron sputtering (ICMS) known as hollow cathode magnetron sputtering for the first time and report the reversible tuning of surface plasmon resonance of Au nanoparticles by only adjusting the external temperature stimuli. The structural, morphological, interfacial analysis and optical properties of the optimized nanostructures have been studied. ICMS has been attracting much attention for its enclosed geometry and its ability to deposit on large area, uniform coating of smart nanocomposites at high deposition rate. Before achieving the aforementioned goals, a systematic study and optimization process of VO2 host matrix has been done by studying the influence of deposition parameters on the structural, morphological and optical switching properties of VO2 thin films. A reversible thermal tunability of the optical/dielectric constants of VO2 thin films by spectroscopic ellipsometry has been intensively also studied in order to bring more insights about the shift of the plasmon of gold nanoparticles imbedded in VO2 host matrix. / South Africa

Magister Philosophiae - MPhil / The fascinating optical properties of metallic nanostructures, dominated by collective oscillations of free electrons known as plasmons, open new opportunities for the development of devices fabrication based on noble metal nanoparticle composite materials. This thesis demonstrates a low-cost and versatile technique to produce stimuli-responsive ultrafast plasmonic nanostructures with reversible tunable optical properties. Albeit challenging, further control using thermal external stimuli to tune the local environment of gold nanoparticles embedded in V02 host matrix would be ideal for the design of responsive functional nanocomposites. We prepared Au-V02 nanocomposite thin films by the inverted cylindrical reactive magnetron sputtering (ICMS) known as hollow cathode magnetron sputtering for the first time and report the reversible tuning of surface plasmon resonance of Au nanoparticles by only adjusting the external temperature stimuli. The structural, morphological, interfacial analysis and optical properties of the optimized nanostructures have been studied. ICMS has been attracting much attention for its enclosed geometry and its ability to deposit on large area, uniform coating of smart nanocomposites at high deposition rate. Before achieving the aforementioned goals, a systematic study and optimization process of V02 host matrix has been done by studying the influence of deposition parameters on the structural, morphological and optical switching properties of V02 thin films. A reversible thermal tunability of the optical/dielectric constants of V02 thin films by spectroscopic ellipsometry has been intensively also studied in order to bring more insights about the shift of the plasmon of gold nanoparticles imbedded in V02 host matrix.

L’utilisation de nanoparticules de polymère pour l’encapsulation de substances utilisées en médecine, en cosmétique ou en agrochimie suscite un intérêt croissant. Parmi les polymères préparés sous forme de nanoparticules, le polyuréthane présente l’avantage d’être biocompatible, biodégradable et adaptable à de nombreuses applications. L’utilisation de diisocyanates pour sa synthèse pose néanmoins un problème sanitaire et environnemental majeur. Ce travail de thèse consiste en la synthèse d’un polyuréthane sans isocyanate, le poly(hydroxy)uréthane (PHU), puis en la préparation de nanoparticules par nanoprécipitation de ce polymère. Un objectif supplémentaire est le développement de nanoparticules de PHU thermo- et pH-stimulable. Dans une première partie, un PHU modèle a été synthétisé et caractérisé. Ce polymère a été nanoprécipité en l’absence de tensioactif afin de valider la faisabilité du procédé. La seconde partie se focalise sur l’étude approfondie et l’optimisation de la nanoprécipitation du PHU modèle en présence de tensioactif. Afin de caractériser le système polymère-solvant-eau-tensioactif, la micellisation du tensioactif et les interactions polymère-solvant ont été étudiées. Un plan factoriel complet a été réalisé afin d’optimiser le procédé de nanoprécipitation utilisant le DMSO comme solvant. Les effets principaux et d’interactions de la concentration en polymère, du volume d’eau et de la concentration en tensioactif sur la taille et la distribution de taille des nanoparticules ont été déterminés. Afin de permettre l’élimination du solvant par évaporation, la nanoprécipitation du PHU a aussi été réalisée en utilisant du THF comme solvant organique. Dans une troisième partie, trois poly(hydroxy)uréthanes pH- et thermo-stimulables ont été synthétisés et caractérisés. Des nanoparticules de faible taille et distribution de taille ont ensuite été préparées par nanoprécipitation. Une fois le solvant organique éliminé par dialyse, la réponse des nanoparticules de PHUs stimulables à des variations de température et de pH a été étudiée. / The use of polymer nanoparticles for substance encapsulation generates a growing interest in medicine, cosmetics or agro-chemistry. Among the polymers used as nano-encapsulation agents, polyurethane has the advantage to be biocompatible, biodegradable and versatile. However, the use of noxious diisocyanates for polyurethane synthesis is a major drawback. This thesis project consists in synthesizing a non-isocyanate polyurethane, poly(hydroxyl)urethane (PHU), and then preparing nanoparticles by PHU nanoprecipitation. An additional objective is the development of thermos and pH-responsive PHU nanoparticles. In a first section, a model PHU was synthesized and characterized. The polymer was then nanoprecipitated in the absence of surfactant in order to ensure the feasibility of the process. The second section focused on the in-depth study and optimization of the model PHU nanoprecipitation in the presence of a surfactant. To characterize the polymer-solvent-water-surfactant system, surfactant micellization and polymer-solvent interactions were studied. A full-factorial design was performed to optimize the nanoprecipitation process using DMSO as an organic solvent. Main and interaction effects of the polymer concentration, water volume and surfactant concentration on nanoparticle size and size distribution were determined. With the aim of eliminating the organic solvent by evaporation, PHU nanoprecipitation was also carried out using THF as the organic solvent. In the third section, three pH- and thermos-responsive PHUs were synthesized and characterized. Small and monodisperse nanoparticles were then prepared by nanoprecipitation. Once the solvent eliminated, responsive PHU nanoparticles were submitted to pH and temperature changes and size variations were studied.

No description available.