O presente trabalho teve por objetivo avaliar a eficiência de remoção do surfactante aniônico alquilbenzeno linear sulfonado (LAS) em reator anaeróbio de leito granular expandido - EGSB (1,5 litros) com recirculação e alimentação com meio mineral. Além de caracterizar filogeneticamente a diversidade de bactérias na presença do surfactante. O sistema foi operado em condição mesofílica em 4 etapas: (I), (II) e (IV) com TDH de 32 horas, e (III) com TDH de 26 horas. Em todas as etapas a DQO foi em média de 609 \'+ OU -\' 137 mg/L e 14 \'+ OU -\' 1,71 mg/L de LAS afluente. As maiores remoções de LAS foram verificada nas etapas II e IV, com valores de 73,6 \'+ OU -\' 5,6% e 63,6 \'+ OU -\' 6,17%, respectivamente de. Na etapa III essa remoção foi de 47,8 \'+ OU -\' 6,2%. Por meio do balanço de massa constatou-se que 56,6% do total de LAS adicionado foram removidos compreendendo 48,4% por biodegradação e 8,2% por adsorção. A remoção de matéria orgânica não foi afetada com a adição do LAS e nem pela exposição prolongada a esse surfactante. Entretanto, a estrutura do grânulo foi comprometida quando da adição do surfactante, observado pelo aumento da concentração de sólidos totais efluente de 0,049 g/L na etapa I (sem LAS), 0,128 g/L na etapa II, 0,064 g/L na etapa III e 0,038 g/L na etapa IV, quando da adição de 14 \'+ OU -\' 1,71 mg LAS/L. Além disso, foi notada diminuição do diâmetro médio dos grânulos no decorrer da operação do reator de 0,36 cm nas etapas I e III para 0,34 cm na etapa IV. Por meio da técnica de tubos múltiplos (NMP) foi constatado aumento das bactérias anaeróbias totais e diminuição das arqueias metanogênicas, em função do tempo de operação do reator. As bactérias redutoras de ferro representaram 8% da biomassa anaeróbia na etapa IV. Por meio do seqüenciamento da região 16S do RNAr para o domínio Bacteria da biomassa da extremidade superior do reator e da biomassa do leito, foi verificado semelhança com os seguintes filos Proteobacteria, Firmicutes e Synergistetes. Notou-se diferença significativa entre as bibliotecas de clones para essas duas amostras. / This study aimed to evaluate the efficiency of removal of linear alkylbenzene sulfonate (LAS) in expanded bed reactor (1.5 liters) using granular sludge (EGSB) with recirculation and feed with mineral medium modified. The system was operated at mesophilic condition in four stages: (I) (II) and (IV) with HRT of 32 hours, and (III) with HRT of 26 hours. At all stages the COD averaged 609 \'+ OR -\' 137 mg/L and 14 \'+ OR -\' 1.71 mg/L LAS influent. The higher removals of LAS were found in stages II and IV, respectively, 73.6 \'+ OR -\' 5.6% and 63.6 \'+ OR -\' 6.17%. In stage III this removal was 47.8 \'+ OR -\' 6.2%. Through mass balance was found that 56.6% of total LAS added were removed by biodegradation comprising 48.4% and 8.2% by adsorption. The organic matter removal was not affected by the addition of LAS and not by prolonged exposure to this surfactant. However, the granule structure was compromised after the addition of surfactant, the observed increase in effluent total solids concentration of 0.049 g/L in stage I (no LAS), 0.128 g/L in stage II, 0.064 g/L in stage III and 0.038 g/L in stage IV when adding 14 \'+ OR -\' 1.71 mg/L. Furthermore, it was noticed significant decrease in mean diameter of the granules during the operation of the reactor of 0.36 cm in stages I and III to 0.34 cm in stage IV. Through the multiple tube method (MPN) was found to increase the total anaerobic bacteria and methanogenic archaea decreased depending on the time of reactor operation. Iron-reducing bacteria accounted for 8% of anaerobic bacteria total in step IV. By sequencing the 16S rRNA for the domain Bacteria biomass from the upper end of the reactor and the biomass of the bed, was found similar to the following phyla Proteobacteria, Firmicutes and Synergistetes. Significant difference was noted between the clone libraries for these two samples.

Dans le cadre de la séparation sélective pour le traitement et la valorisation des combustibles nucléaires usés, l’extraction liquide/liquide est largement utilisée au niveau industriel. Néanmoins, ce procédé est encore mal compris en ce qui concerne les phénomènes physico-chimiques qui se produisent à l’interface liquide/liquide. Ce travail porte sur la compréhension de la dynamique de l’interface liquide nanométrique durant le transfert d’une espèce entre une phase aqueuse et une phase organique. Deux techniques expérimentales ont principalement été utilisées: la mesure de tension interfaciale et l’optique non linéaire. Ce travail a également donné lieu au développement d’un modèle numérique de dynamique de transfert de phase prenant en compte à la fois des phénomènes de transport diffusif proche de l’interface et une cinétique chimique sur l’interface décrivant les processus d’adsorption/désorption. Des systèmes modèles constitués de molécules surfactantes et/ou chromophores et/ou complexantes ont été étudiés aux interfaces air/liquide et liquide/liquide. L’adsorption/désorption, l’agrégation en surface, la complexation d’ion à une interface liquide et la structuration des systèmes ont ainsi pu être étudiées tant d’un point de vue des états d’équilibre que de la dynamique. Enfin, ces études ont été appliquées à un système d’intérêt industriel utilisé dans le procédé de dépollution DIAMEX / Liquid-liquid extraction processes are widely used in the industrial fields of selective separation. Despites its numerous applications, the microscopic mechanisms which occur during a liquid liquid extraction processes are really unknown specially at the liquid/liquid interface. Thus, this work deals on the understanding of the phenomena which drive the mass transfer across a liquid/liquid interface. Two experimental techniques were used in this work: dynamic interfacial tension measurement and non-linear optical experiments. Along with the use of this experimental approach, a numerical model describing the mass transfer dynamic has been developed. This model works under the assumption that both diffusion and a chemical step describing adsorption and desorption processes contribute to the global transfer kinetics. Model systems of surfactant molecules, chromophore molecules and complexing molecule were investigated at liquid/liquid and air/liquid interface. Interfacial phenomena like adsorption, surface aggregation and ion complexing were studied. Finally, the methodology developed in this work was applied to studied an extractant molecule with potential industrial application

The aim of this study was to understand the contribution of Linear Alkylbenzene Sulfonates (LAS) to the decline of Mediterranean coastal forest exposed to marine aerosols. LAS are a group of synthetic anionic surfactants widely used in the composition of household or industrial detergents and agrochemicals. This study was part of a large project (RISICO) aiming the assessment of the environmental impact of the LAS at multiple levels: biodegradation in the coastal waters, sorption – desorption processes in the sediments, toxicity to the aquatic life and toxicity to the coastal forest (by aerosolisation of the sea water). <p>Previous studies pointed out this group of surfactants as the main cause of the coastal forest decline. However, the quantification of this surfactant in the environmental samples (mainly sea water and foliar deposition) was done using non-specific analytical methods as methylene blue active substances (MBAS), leading to overestimation of the environmental concentrations of LAS. <p>The work hypothesis was that at actual environmental concentrations, the LAS does not play a key role in the foliar uptake of the sea salt deposited on the coastal vegetation by the marine aerosols, therefore the LAS may not be the main cause of the coastal forest decline. <p>The research involved both greenhouse experiments and field measurements. The experimental work was conducted on young Mediterranean trees (Laurus nobilis L. Quercus ilex L. and Pinus halepensis P. Mill.) and investigated the synergistic toxic effects of exposure to simulated marine aerosol contaminated with surfactants. An array of endpoints was used including photosynthetic activity, relative water content, foliar deposition and uptake of salt and LAS, and pigments analysis. The results of those experiments revealed that LAS itself did not have phytotoxic effects. Nevertheless, the surfactant was shown to enhance the foliar uptake of the salt in the tested species, especially in Pinus halepensis, confirming the conclusions of previous studies regarding the sensitivity of this species to polluted marine aerosols. <p>The field work was conducted in San Rossore National Park (Italy) and Porquerolles Island (France) and was focused on evaluating the health status of the Mediterranean forest (Quercus ilex L. Pinus halepensis Mill. and Pinus pinaster Aiton.) and also on quantification of LAS in coastal aerosols using highly specific analytical methods, like the mass spectrometry (MS). The frequencies and extent of injuries in the coastal trees were found to be correlated to the salt but not with the LAS content of the leaves. The concentrations of LAS in the Pinus and Quercus leaves were comparable in the two studied sites but the concentrations of salt were extremely high in San Rossore, suggesting that other factors may determine the excessive salt foliar uptake. The parallel MS and MBAS carried out in the same set of aerosol samples revealed that MBAS measurements were not relevant for LAS concentrations in the marine aerosols. Projecting the experimental results to the real LAS and salt exposure of the coastal forest, we concluded that LAS may play a marginal role in coastal vegetation decline. <p> / Doctorat en Sciences / info:eu-repo/semantics/nonPublished

La présente étude est une approche holistique axée sur l'étude des effets spécifiques d'ions sur les propriétés d'auto-assemblage de tensioactifs cationiques gemini. Notre objectif principal étant l’étude de l'effet de divers contre-ions sur les caractéristiques d’auto-assemblage de tensioactifs cationiques en solution aqueuse. Afin d'obtenir une vision plus complète de l'effet des interactions ioniques et moléculaires à l’interface sur les propriétés globales, nous avons utilisé des approches différentes. Nous avons combiné une étude expérimentale portant sur les propriétés en solution (concentration micellaire critique, degré d'ionisation, nombre d'agrégation, etc.), avec des approches centrées sur l'étude des propriétés micellaires interfaciales en analysant les concentrations des contre-ions et de l'eau de façon expérimentale (piégeage chimique) et informatique (simulations de dynamique moléculaire). En outre, nous avons étudié l'impact de la nature des contre-ions sur la croissance des micelles géantes par rhéologie. En plus de l'examen des propriétés de tensio-actifs en solution, les effets spécifiques d'ions sur les structures cristallines des agents tensioactifs gémini ont été étudiés.Nous avons trouvé que les effets d'ions spécifiques qui déterminent le comportement des agrégats micellaires de gemini cationiques d'ammonium quaternaire dans des solutions aqueuses dépendent fortement de l'énergie libre d'hydratation des contre-ions, en d'autres termes, sur leur propriétés hydrophile /hydrophobe. Contrairement à la solution aqueuse, dans les cristaux, la taille de l'ion devient le facteur déterminant. La comparaison des résultats obtenus pour un même système en solution aqueuse et à l'état solide a montré l'importance des interactions ion-eau dans les effets spécifiques d'ions. Cependant, il faut noter que les propriétés du substrat (les gemini dans notre cas) doivent être prises en compte non moins soigneusement afin de prédire complétement les effets Hofmeister. / The present study is a holistic approach focused on the investigation of ion specific effects on the self-assembly properties of cationic gemini surfactants. Our main focus was on the effect of various counterions on the self-organization features of cationic surfactants in aqueous solution. In order to obtain amore comprehensive understanding of the effect of interfacial ionic and molecular interactions on aggregate properties we used different approaches. We combined an experimental study focused on the bulk solution properties (critical micelle concentration, ionization degree, aggregation number, etc.), with approaches focused on investigating the interfacial micellar properties by analyzing the interfacial counterion and waterconcentrations, experimentally (chemical trapping) and computationally (molecular dynamic simulations). Moreover, the impact of counterion nature was investigated by studying the growth of wormlike micelles using rheology. Besides the examination of the surfactants properties in solution, the ion specific effects onthe crystalline structures of gemini surfactants were studied.We found that ion specific effects which determine the behavior of micellar aggregates of cationic quaternary ammonium gemini in aqueous solutions strongly depend on the free energy of hydration of the counterions, in others words, on their hydrophilic/hydrophobic properties. Contrarily to aqueous solution, in crystals, the size of the ion becomes the determining factor. Comparison of the results obtained for the same system in aqueous solution and in solid state showed the importance of ion-water interactions in ion specific effects. However, one should note that the properties of substrate (the gemini in our case) should be taken into account not less carefully in order to fully predict Hofmeister effects.

Surfactants are used in a wide assortment of "down-the-drain" consumer products, yet they are often discharged in wastewater treatment plant effluent into receiving water, potentially causing environmental harm. The objective of this project was to predict surfactant toxic units and in-stream nutrients in the upper Trinity River watershed. Surface and pore water samples were collected in late summer 2005. General chemistries and surfactant toxic units were calculated. GIS models of anthropogenic and natural factors were collected and analyzed according to subwatersheds. Multiple regression analyses using the Maximum R2 improvement method were performed to predict surfactant toxic units and in-stream nutrients using GIS and in-stream values. Both geospatial and in-stream parameters generated multiple regression models for surfactant surface and pore water toxic units, as well as in-stream nutrients, with high R2 values. Thus, GIS and in-stream parameter modeling have the potential to be reliable and inexpensive method of predicting surfactant toxic units and nutrient loading in the upper Trinity River watershed.

No description available.

No description available.

Biopolymer surfactant systems have been studied by using different physico chemical methods. As the biopolymer, it was chosen high (1400–1600 kDa), medium (250–450 kDa) and low (8–15 kDa) molecular weight sodium hyaluronate. Two cationic surfactants – cetyltrimethylammonium bromide (CTAB) and carbethopendecinium bromide (Septonex) were selected to provide polyelectrolyte complexes with oppositely charged hyaluronan. The critical aggregation concentration of the surfactant in the system was monitored by dynamic light scattering (Zetasizer Nano ZS). SEC-MALS method was used for the description of the conformation of sodium hyaluronate of different molecular weights and polyelectrolytes complexes hyaluronan surfactant after reaching the aggregation point. Isothermal titration calorimetry (ITC) was used to determine the critical aggregation concentration of the surfactant by monitoring the thermal changes accompanying the aggregation of the system. It was found out that the increasing molecular weight of hyaluronan in these systems decreases the critical aggregation concentrations and conversely.

The thesis deals with the study of the influence of concentration and different types of surfactants (Igepal CO-520, Arkopal N110, Igepal CO-890, sodium dodecyl sulfate, sodium dodecylbenzenesulfonate, dodecyltrimethylammonium bromide and Dehyton PL) on the environmental stress cracking resistance of high-density polyethylene by means of Full Notch Creep Test. Furthermore, the influence of ligamental stress (3,5; 4,0 a 4,5 MPa), pH of the prepared active environment and type of the water used as a solvent for the surfactants on the time to failure was monitored. An accelerating effect was observed at increased concentration, stress and molecular weight. Faster failure was achieved after exposure to ionic types compared to nonionic. The rate of the notch opening was determined. The brittle and ductile behavior during the process of failure was evaluated by microscopic analysis of the morphology of the fracture surfaces. Based on the pH change after the test, the stability of the active environment was evaluated. Deteriorating quality of surfactant solutions was observed. Raman spectroscopy and Fourier transform infrared spectroscopy were used to detect the surfactant on the surface of the test specimen after the test.

This diploma thesis studied the interaction of ionic and amphiphilic fluorescent probes with polyelectrolytes. The research of such colloidal system could be helpful in deeper understanding of interactions between polyelectrolytes and surfactants. The aim of this thesis was to determine whether ionic or amphiphilic probes are suitable for this research. Two polyelectrolytes, sodium polystyrene sulfonate and hyaluronan were used in this study. Interactions of polyelectrolytes with fluorescent probes (4-Di-2-Asp, methylene blue, dodecyl acridine orange, DiO and DiA) were studied in this work. Then cationic surfactant cetyltrimethylamonium bromide was added to this system. Samples were studied using fluorescence and UV/VIS spectroscopy. Emission and absorption spectra of these probes were recorded. This experiment was based on hypothesis that due to positive charge these probes will bind to the negatively charged polyelectrolyte. Formation of dimers or other aggegates was presumed for fluorescent probes dodecyl acridine orange and methylene blue. When 4-Di-2-Asp was used,changes in fluorescence intensity and absorption spectra in connection with possible formation of aggregates was supposed to be observed. It should be noted that formation of dimers for 4-Di-2-Asp is not described in literature. The formation of dimers wasn't clearly demonstrated during the measurement. Formation of dimers was observed only with dodecyl acridine orange. Probes DiO and DiA were used only in the study of the interaction with polyelectrolytes. These fluorescent probes showed up as inappropriate, because they adsorbed on tube walls. When cationic surfactant was added to hyaluronan-fluorescent probe system, surfactant pushed away fluorescent probe and bonded electrostatically to negatively charged groups of polyelectrolyte.