M. Tech. (Department of Chemistry, Faculty of Applied and Computer Science), Vaal University of Technology / Cadmium and cobalt complexes of urea and thiourea were synthesized using ethanol as a solvent. All complexes were refluxed at 70 - 80 °C, left to cool at room temperature, washed with methanol and acetone to remove impurities and dried at an open environment. The characterization of complexes was done using FTIR spectroscopy, elemental analysis and TGA. The complexes were found to coordination with the ligands through sulphur and oxygen atoms to the metal, instead of nitrogen. These were as results of wavelength shifting from high to low frequency from spectra of the complexes as compare to their free ligands. These observations make these complexes good candidates for the possible use in synthesis of metal sulphides or oxides nanoparticles. Thermogravimetric analyses of all the complexes were conducted to check the stability of use as precursors for nanoparticles at low and high temperature. A number of thiourea and urea complexes with cadmium and cobalt have been prepared and used in the preparation of metal sulphides/oxides nanoparticles. Complexes start to decompose at low temperature about 100°C and the last decomposition step was at about 800-900°C, which is convenient to thermal decomposition of precursors in the high boiling solvents or capping agent to prepare surface capped metal sulphides/oxides nanoparticles. The complexes were easy to synthesize, low cost and stable in air and were obtained in reasonable yields. All the complexes reported in this study have been used as single source molecular precursor in the preparation of cadmium oxide, cadmium sulphide, cobalt oxide, cobalt sulphide nanoparticles (normal) and as mixture of any two complexes to form core-shells nanoparticles. Quality nanoparticles synthesis requires three components: precursors, organic surfactants and solvents. The synthesis of the nanoparticles can be thought of as a nucleation event, followed by a subsequent growth period. Both the nucleation and growth rates were found to be dependent upon factors such as temperature, growth time, and precursor concentration. For a continuous flow system the residence time (at nucleation and growth conditions) was also found to be important. In order to separate the nucleation and growth events, injection techniques were employed to achieve rapid nucleation of nanoparticles with final size dictated by the growth temperature and/or residence time through the growth zone of the reaction system. Good crystalline normal nanoparticles were obtained from thermolysis of the precursors in hexadecylamine (HDA) as the capping agent at fixed concentrations, temperature and time. All nanoparticles showed a blue-shift in band edges with good photoluminescence behaviour which is red-shifted from their respective band edges and XRD patterns, the crystal structure are in hexagonal phase. The particles showed rods, spheres and hexagonal shapes. Nucleation and growth mechanism brings new avenue in nanostructures called core-shells, which have been reported to have improved luminescence, quantum yields, decreased fluorescence lifetimes, and benefits related to the tailoring of the relative band-gap positions between the two materials. In this study cadmium and cobalt complexes of urea and thiourea were separately dispersed in TOP and injected separately (allowing nucleation/core to occur, followed by the shell) in hot HDA at 180ºC for 1hour to yield core-shell nanoparticles. Parameters, such as concentration, temperature and capping molecule as factor affecting nucleation and growth of the core-shells were monitored. The core-shell nanoparticles were characterized by UV/Vis spectroscopy, XRD and TEM. We observed spherical, tripod, bipods, hexagonal and irregular shaped nanoparticle as the concentration of the precursors was increasing, however we were able to form core-shells nanoparticles in one set of experiment 1:3 CdS-CdO, which are assumed to be a reverse type I coreshells nanoparticles. Exciton absorption peaks at higher energy than the fundamental absorption edge of bulk indicate quantum confinement effect in nanoparticles as a consequence of their small size. XRD patterns, crystals range from hexagonal, cubic and mixture of hexagonal and orthorhombic. A low temperature studies were also conducted a mixture of hexagonal and sphererical shapes with sheets like onion morphology were observed. / NRF HUB & SPOKES (VUT)

In this thesis complexes of acylchalcogoureas with cadmium (II), lead (II) and nickel (II) have been synthesised and investigated as single source precursors for the formation of metal chalcogenide thin films viaaerosol assisted chemical vapour deposition (AACVD). Routes to binary thin films have been explored using homoleptic complexes of the general structure bis(N,N-diethyl-N'-naphthoylchalcogoureato)metal(II). Analysis of the thin films produced showed the successful deposition of the binary materials from the synthesised complexes when characterised by powder XRD, ICP-OES, SEM and EDX. Routes to ternary thin films with the general structure MExE'1-x, where M represents a metal (Cd, Ni and Pb); and E chalcogen (S or Se) have been investigated using heteroleptic metal complexes of cadmium, nickel or lead including different chalcogen containing N,N-diethyl-N'-naphthoylchalcogoureato ligands and diethyldithiocarbamate. The precursors were fully characterised and novel compounds had their crystal structures determined. The heteroleptic complexes were thermolysed by AACVD forming the MExE'1-x thin films. In the cases of lead, nickel and cadmium the thin films produced showed that the composition of the film tended heavily towards the metal selenide. Ternary films of type MS1-xSex was prepared by mixing their binary precursors of type bis(N,N-diethyl-N'-naphthoylselenoureato)metal(II) and bis(N,N-diethyl-N'-naphthoylthioureato)metal(II) [metal = Cd, Ni and Pb]. In the case of lead and cadmium chalcogenide films variation of the ratio of sulphur and selenium containing precursors allowed for the full transition in composition between metal sulphide and metal selenide. In the case of CdS1-xSexthe band gap of the films was determined from UV-visible spectroscopy to vary from 2.4 eV (CdS) to 1.7 eV(CdSe). In the case of NiS1-xSex the movement from sulphide to selenide was less simple with multiple phases of nickel chalcogenides produced.

Tese de Mestrado Integrado. Engenharia Mecânica. Faculdade de Engenharia. Universidade do Porto. 2012

Förfrågan efter nya och mer avancerade applikationer är en pågående process vilket leder till en konstant utveckling av nya material. För att förstå relationen mellan en applikations egenskaper och dess sammansättning krävs full förståelse och kontroll över materialets uppbyggnad. En sådan kontroll över uppbyggnaden hos material hittas i en undergrupp till dendritiska polymerer som kallas dendrimerer. I den här doktorsavhandlingen belyses nya metoder för att framställa dendrimer med hjälp av selektiva kemiska reaktioner. Sådana selektiva reaktioner kan hittas inom konceptet klickkemi och har i detta arbete kombinerats med traditionell anhydrid- och karbodiimidmedierad kemi. Denna avhandling diskuterar en accelererad tillväxtmetod, dendrimerer med inre och yttre reaktiva grupper, simultana reaktioner och applikationer baserade på dessa dendritiska material. En accelererad tillväxtmetod har utvecklats baserad på AB2- och CD2-monomerer. Dessa monomerer tillåter tillväxt av dendrimerer utan att använda sig av skyddsgruppkemi eller aktivering av ändgrupper. Detta gjordes genom att kombinera kemoselektiviteten hos klickkemi tillsammans med traditionell syraklorid kopplingar. Dendrimerer med inre alkyn- eller azidfunktionalitet syntetiserades genom att använda AB2C-monomerer. Den dendritiska tillväxten skedde med hjälp av karbodiimidmedierad kemi. Monomererna som användes bär på en C-funktionalitet, alkyn eller azid, och på så sätt byggs får interiören i de syntetiserade dendrimeren en inneburen aktiv funktionell grupp. Ortogonaliteten hos klickkemi användes för att sammanfoga monomerer till en dendritisk struktur. Traditionell anhydridkemi- och klickemireaktioner utfördes samtidigt och på så sätt kunde dendritiska strukturer erhållas med färre antal uppreningssteg. En ljusemitterande dendrimer syntetiserades genom att koppla azidfunktionella dendroner till en alkynfunktionell cyclenkärna. Europiumjoner inkorporerades i kärnan varpå dendrimerens fotofysiska egenskaper analyserades. Mätningarna visade att den bildade triazolen hade en sensibiliserande effekt på europiumjonen. Termiska studier på några av de syntetiserade dendrimerer utfördes för att se om några av dem kunde fungera som templat vid framställning av isoporösa filmer. / The need for new improved materials in cutting edge applications is constantly inspiring researchers to developing novel advanced macromolecular structures. A research area within advanced and complex macromolecular structures is dendrimers and their synthesis. Dendrimers consist of highly dense and branched structures that have promising properties suitable for biomedical and electrical applications and as templating materials. Dendrimers provide full control over the structure and property relationship since they are synthesized with unprecedented control over each reaction step. In this doctoral thesis, new methodologies for dendrimer synthesis are based on the concept of click chemistry in combination with traditional chemical reactions for dendrimer synthesis. This thesis discusses an accelerated growth approach, dendrimers with internal functionality, concurrent reactions and their applications. An accelerated growth approach for dendrimers was developed based on AB2- and CD2-monomers. These allow dendritic growth without the use of activation or deprotection of the peripheral end-groups. This was achieved by combining the chemoselective nature of click chemistry and traditional acid chloride reactions. Dendrimers with internal azide/alkyne functionality were prepared by adding AB2C monomers to a multifunctional core. Dendritic growth was obtained by employing carbodiimide mediated chemistry. The monomers carry a pendant C-functionality (alkyne or azide) that remains available in the dendritic interior resulting in dendrimers with internal and peripheral functionalities. The orthogonal nature of click chemistry was utilized for the simultaneous assembly of monomers into dendritic structures. Traditional anhydride chemistry and click chemistry were carried out concurrently to obtain dendritic structures. This procedure allows synthesis of dendritic structures using fewer purification steps. Thermal analyses on selected dendrimers were carried out to verify their use as templates for the formation of honeycomb membranes. Additionally, a light emitting dendrimer was prepared by coupling of azide functional dendrons to an alkyne functional cyclen core. A Europium ion was incorporated into the dendrimer core, and photophysical measurements on the metal containing dendrimer revealed that the formed triazole linkage possesses a sensitizing effect. / QC 20100629

The mechanisms and kinetics of combustion of waste wood as well as the phases during combustion processes are important to eliminate these wastes without any possible damage to environment. In the present study, combustion mechanisms, activation energy and pre-exponential constants, and phases of combustion were investigated for untreated natural pine and treated Medium Density Fiberboard (MDF), plywood and particleboard samples that involve some chemicals and additives. Waste wood samples were heated in air at 10, 20 and 30oC/min heating rates in a Thermo Gravimetric Analyzer (TGA) from room temperature to 900oC. Thermogravimetry (TG) and Derivative Thermogravimetry (DTG) curves for all samples were obtained. The gases formed during combustion reactions were directly fed to a Fourier Transform Infrared Spectroscopy (FTIR) instrument coupled to TGA. Emission characteristics of the samples were determined in-situ by using the FTIR spectrums. As a result of TG analysis, thermal decomposition of treated samples was observed at lower temperatures as compared to the untreated pine sample because of the catalyzing effects of the chemicals in the treated samples. Therefore, there were less flammable products, lower weight losses in the main oxidation region, decrease in the max. weight loss temperatures and formation of more char for treated samples as compared to untreated pine sample. In other words, chemicals used during production of these samples lead to decrease in the combustibility of the treated samples. Thermal kinetic constants for the samples were calculated by using Coats Redfern and Broido Methods. In order to find out the mechanisms responsible for the oxidation of the waste wood samples in different regions, six solid state mechanisms of Coats Redfern Method were tested. As a result of FTIR analysis of the emitted gases from TG analysis, several chemical groups were detected from pine and treated samples. Combustion of all samples revealed some gases containing aromatics, C-H groups, CO2 and CO. However, there were some toxic and carcinogenic gases like formaldehyde, isocyanate group, ammonia, phenyl group and benzoylbromide among the emissions of treated samples which need utmost attention when recovering energy from treated waste woods.

Cette étude a pour but l'étude de l'os minéralisé et de sa matrice par spectrométrie d'absorption infrarouge. L'os est un tissu conjonctif qui constitue, avec le cartilage, le squelette. Les os assurent trois fonctions: (1) support mécanique et site d'attachement du muscle pour la locomotion, (2) protectrice pour les organes vitaux. et la moelle osseuse et (3) métabolique : Réserve ionique pour tout l'organisme, spécialement en calcium et en phosphate. Les constituants fondamentaux des tissus conjonctifs sont les cellules et la matrice extracellulaire. Cette dernière est particulièrement abondante dans l'os et se compose de fibres de collagène, de protéines non collagéniques et de substances non protéiniques. Cette matrice a la possibilité de se calcifier. Anatomiquement on peut distinguer deux types d'os dans le squelette : les os plats (côte, mandibule, iliaque ... ) et les os longs (tibia, fémur, humérus) qui dérivent de deux types distincts d'histogénèses (intramembranaire et endochondrale) bien que le développement et la croissance des os longs comportent les deux types à la fois.

The catalytic depolymerization/pyrolysis of nylon 6 and 66 were investigated with the prospect of helping to curb the amount of carpet landfilled. Thermogravimetric analysis was used to determine which catalysts (and their nylon/catalyst ratio) were most suited for the depolymerization. By adding bases, the onset of degradation for some bases was 100 aC lower than that of the pure nylons. Potassium hydroxide and sodium hydroxide were found to be the most effective catalysts at a catalyst ratio of 100:1 of nylon 6 and nylon 66 to catalyst, respectively. After determining the most efficient catalyst, kinetic models/parameters from the TGA data were determined. These parameters were used in a reactive extrusion model for depolymerizing nylon 6 in carpet. Data from the model was then used to do cost analysis for the process. It was found that to get a Present Value Ratio greater than 1, the flow rate has to be greater than or equal to 500 lb/hr. At even higher flow rates up to the model¡¦s limit (1500 lb/hr), the Net Present Value shows that this process is economically viable. Extrusion of a 100:1 ratio of pure N6 and KOH was done in a 30 mm counter-rotating non-intermeshing twin screw extruder. The material collected from the vents of the extruder was tested with a gas chromatograph- mass spectrum (GC-MS) in tandem. There was only one significant peak from the GC and the primary molecular weight on the MS was 113, the molecular weight of caprolactam. This shows that the process could be profitable and require little purification if done industrially.

Ce travail porte sur la synthèse et la caractérisation d’oxydes de manganèse de formule généraleCaxMnyOz avec y/x > 1. Par une approche de chimie du solide, les propriétés redox de ces matériauxseront corrélées à leur composition chimique et leur structure cristalline ce qui constitue une étude enamont de l’application pour ces systèmes pouvant jouer le rôle de tampon à oxygène dans desprocessus catalytiques. Les composés ont été synthétisés par autocombustion en voie aqueuse etcaractérisés d’un point de vue structural. Les propriétés redox ont été évaluées par ATG et lespropriétés de réductibilité par H2-TPR pour certains composés. Quelles que soient la structure, ladimensionnalité ou la valence du manganèse dans les composés oxydés (Mn4+/Mn3+), le manganèsese réduit totalement en Mn2+ sous atmosphère réductrice (Ar/H2). Les composés réduits cristallisentdans une solution solide de type NaCl de formule Ca1-xMnxO. Les mécanismes de réduction dumanganèse au sein de ces structures ont été appréhendés sur la base des analysesthermogravimétriques. Afin de faire varier les températures de réduction, l’iono-covalence de la liaisonMn-O a été modifiée via des substitutions cationiques (i) sur les sites du calcium principalement ausein de réseaux 2D ou (ii) sur les sites du manganèse essentiellement dans les réseaux 3D avec laprésence d’Al3+ ou de Fe3+ de rayons ioniques comparables respectivement à Mn4+ et Mn3+. Lessolutions solides ont été caractérisées d’un point de vue structural mais aussi pour leurs propriétésredox. Il convient de souligner que les phases substituées au Fer présentent des propriétés redox toutà fait remarquables dans la mesure où les ions Fe3+ tout comme Mn4+/3+ se réduisent d’abord en Fe2+puis en Fe° qui est dès lors expulsé hors de la matrice oxyde. Lors de la réoxydation, le fer réintègrele réseau 3D et les matériaux sont cyclables dans des conditions réductrices puis oxydantes à l’air àdes températures inférieures à 1000°C. / This work deals with the synthesis and characterization of manganese oxides with CaxMnyOz formulaand y/x >1. According to a solid state chemistry scope, the redox properties of these materials will becorrelated to their chemical composition and crystallographic structure which constitutes a forehandexploratory study of compounds that are intended to be used for the automotive catalysis exhaustbased on the three-way catalysis principle. The materials were synthesized by aqueous selfcombustionroute and structurally characterized. Redox properties and reducibility properties wereevaluated by TGA and H2-TPR, respectively. Whatever the structure, the dimensionality of the networkor the manganese valence in the starting oxidized material, all of the manganese ions are completelyreduced (Mn2+) in a Ar/H2 atmosphere. The reduced compounds crystallize in a rock-salt type solidsolution with the formula Ca1-xMnxO. The mechanisms of manganese reduction within these structureswere explored on the basis of TGA analysis. In order to tune the reduction temperatures, the ionocovalenceof the Mn-O bond has been modified by either cationic substitution of calcium in the 2Dnetworks or either substitution of manganese in the 3D networks. In this last case, Substituting ionswere Al3+ and Fe3+ which ionic radii comparable to Mn4+ and Mn3+, respectively. Solid solutions havebeen characterized from a structural point of view but also for their redox properties. One shouldnotice that iron substituted compounds exhibit remarkable redox properties because Fe3+ ions firstreduce in Fe2+ iron before a final reduction in Fe° that is consequently expulsed from the matrix. Atreoxidation, iron returns into the 3D network and cycling can be observed when reducing and oxidizingat temperatures lower than 1000°C.

Ce travail de thèse s’inscrit dans les thèmes de la photodégradation et de la biodégradation de polymère pouvant être ou non d’origine renouvelable. Il a pour principal objectif d’étudier la durabilité photochimique de différents polymères ou mélanges de polymères utilisés en particulier dans l’agriculture et donc soumis à un vieillissement climatique. La structure chimique des polymères est un des principaux paramètres susceptible d’influencer la photodégradation. Un ensemble de (co)polyesters comportant des unités aliphatiques, cycliques et / ou aromatiques a été sélectionné dans le but d’exprimer une relation structure / photodurabilité. Le photovieillissement des matériaux a été réalisé en conditions naturelles et en conditions accélérées. Des mécanismes de photo-oxydation ont été proposés pour chacun des matériaux à partir de l’évolution des propriétés viscoélastiques traduisant celle de la structure macromoléculaire. Dans ce contexte, l’étude de la durabilité de ces matériaux respectueux de l’environnement doit s’intéresser à des systèmes extrêmement complexes dont chaque constituant est susceptible d’évoluer. Cette caractéristique exige de mettre au point une méthodologie permettant de déterminer la composition d’un biocomposite et d’en suivre les modifications en cours de vieillissement en même temps que l’évolution de la structuration de ces matériaux. / This thesis is part of the subject photodegradation and biodegradation of polymer that can be or not from renewable resources. Its main objective is to study the photochemical durability of various polymers or polymer blends used particularly in agriculture and therefore subject to weathering. The chemical structure of polymers is one of the main parameters that could influence the photodegradation. A set of (co)polyesters containing units aliphatic, cyclic and / or aromatic have been selected in order to express the relationships structure / photodurability. The photoageing of materials was carried out under natural and accelerated conditions. Photo-oxidation mechanisms have been suggested for each material based on the evolution of the viscoelastic properties reflecting the macromolecular structure. In this context, the study of the durability of these ecofriendly materials should address in highly complex systems in which each component is subject to change. This feature requires the development of a methodology to determine the composition of a biocomposite and monitor the changes during ageing at the same time as changing the structure of these materials.

No description available.