No description available.

Le microscope à force atomique (AFM) permet de caractériser avec une excellente résolution spatiale les surfaces d’échantillons de différentes natures et peut être mis en œuvre dans des milieux variés. Cette versatilité a favorisé le développement d’un grand nombre de techniques dérivées, destinées à investiguer diverses propriétés physiques locales. Le LGEP a ainsi réalisé un module, le Résiscope, capable de mesurer la résistance électrique locale à la surface d’un échantillon polarisé en continu, sur une gamme de 11 décades. Mise au point en mode contact, où la pointe exerce en permanence une force sur l’échantillon, cette technique fonctionne très bien sur des matériaux durs, mais trouve ses limites sur des échantillons mous ou fragiles puisque dans certaines conditions, la pointe peut altérer leur surface. Pour de tels échantillons, un mode contact intermittent, dans lequel la pointe vient à intervalles réguliers toucher très brièvement la surface, est plus approprié, mais complique la réalisation des mesures électriques. Le but de la thèse consistait à lever cette difficulté en modifiant le Résiscope pour pouvoir l’associer au « Pulsed Force Mode », mode intermittent où la pointe oscille à une fréquence de 100Hz à 2000Hz.Différentes évolutions matérielles et logicielles ont été apportées pour permettre le suivi temporel détaillé du signal de résistance électrique à chaque établissement/rupture de contact (indispensable pour passer en revue les phénomènes liés à l’intermittence), de même que pour pouvoir travailler à des vitesses de balayage acceptables. Pour l’imagerie, les meilleurs contrastes ont été obtenus grâce à une électronique de synchronisation et de traitement prenant en compte les valeurs de résistance électrique à des moments bien précis. Pour tester ce nouveau système, nous avons dans un premier temps comparé les courbes de résistance et de déflexion que nous obtenons par ce mode avec celles considérées classiquement dans le mode approche-retrait. Nous avons ensuite étudié l’influence des principaux paramètres (fréquence et amplitude d’oscillation, force d’appui, type de pointe, etc.) sur les mesures topographiques et électriques, en utilisant le HOPG comme matériau de référence. Ces essais ont notamment permis de mettre en évidence un retard quasi systématique du signal électrique par rapport au signal de déflexion (autre que le temps de mesure propre au Résiscope), dont nous n’avons pu élucider l’origine. Une fois ces connaissances acquises, nous avons étudié deux types d’échantillons organiques, l’un à caractère académique – des monocouches auto-assemblées d’alcanethiols (SAMs), l’autre à finalité plus applicative – des couches minces formées d’un réseau interpénétré de deux constituants (P3HT:PCBM) destinées aux cellules photovoltaïques. Dans les deux cas nous avons montré la pertinence de l’outil Résiscope en mode intermittent pour obtenir des informations qualitatives et quantitatives. Parallèlement à ces travaux sur matériaux fragiles, nous avons mené une étude annexe sur un phénomène de croissance de matière à caractère isolant constaté dans des conditions particulières sur différents matériaux durs, qui a été interprété comme la formation de polymère de friction sous l’effet des nano-glissements répétés associés à la déflexion du levier.Ces travaux ont été réalisés dans le cadre d’une convention CIFRE avec la société Concept Scientifique Instruments, adossée au projet ANR « MELAMIN » (P2N 2011). / The atomic force microscope (AFM) allows to characterize with excellent spatial resolution samples of different types of surfaces and can be implemented in various environments. This versatility has encouraged the development of a large number of derivative technics, intended to investigate various local physical properties. The LGEP thus achieved a module, the Résiscope, capable of measuring the local electrical resistance on the surface of a sample polarized continuously, on a range of 11 decades. Developed in contact mode, where the tip continuously exerts a force on the sample, this technic works well on hard materials, but finds its limits on soft or fragile samples since under certain conditions, the tip can alter the surface. For such samples, an intermittent contact mode, in which the tip comes at regular intervals touch very briefly the surface, is more appropriate, but complicates the achievement of electrical measurements. The aim of this thesis was to overcome this difficulty by changing the Résiscope to be able to join the "Pulsed Force Mode", intermittent mode where the tip oscillates at a frequency of 100Hz to 2000Hz. Different hardware and software changes have been made to permit the detailed temporal monitoring of the electrical resistance signal to each make / break contact (necessary to review the phenomena related to intermittency), as well as to be able to work in acceptable scan speeds. For imaging, the best contrasts were obtained through an electronic timing and treatment taking into account the electrical resistance values at specific times.To test this new system, we have initially compared resistance and deflection curves we get by this mode with those considered classically in the force-distance curves mode. We then investigated the influence of main parameters (frequency and amplitude of oscillation, setpoint, coating of the tips, etc.) on the topographical and electrical measurements, using the HOPG as reference material. These tests resulted to highlight a nearly systematic delay of the electrical signal relative to the deflection signal (other than the Resiscope measure time), which we were not able to elucidate the origin. Once these knowledge acquired, we studied two types of organic samples, one in academic nature - Self-Assembled Monolayers of alkanethiols (SAMs), the other more applicative purpose – formed of thin layers of an interpenetrating network of two components (P3HT:PCBM) for photovoltaic cells. In both cases we have shown the relevance of the Resiscope tool in intermittent mode to obtain qualitative and quantitative information. In addition to these work on fragile materials, we conducted an annex study on a phenomenon of growth material of insulating nature found in special conditions on various hard materials, which has been interpreted as the friction polymer formation as a result of repeatedly nano-sliding associated with the deflection of the cantilever. These investigations were conducted under a CIFRE agreement with the Concept Scientific Instruments company, backed by the ANR MELAMIN» (P2N 2011) project.

L'eczéma allergique de contact (EAC) est une pathologie inflammatoire cutanée de plus en plus fréquente. Il s’agit d’une sensibilisation vis-à-vis de substances chimiques, appelées haptènes, qui sont en contact répété avec la peau. A l’heure actuelle, le pouvoir sensibilisant d’une molécule est évalué principalement grâce à des modèles animaux. Cependant, dans un contexte européen exigeant le développement de méthodes alternatives, la compréhension et la reproduction in vitro des mécanismes de l’EAC permettent le développement de nouvelles stratégies. Le but de ce travail, réalisé sur des cellules dendritiques (DCs) et la lignée humaine U937, est de mettre en évidence les événements précoces de la signalisation intracellulaire à l’origine de l’activation des DCs induite par des allergènes, et notamment par le composé mercurique thimerosal. Les résultats obtenus démontrent que l’induction d’un stress oxydant par les allergènes est un mécanisme induit précocement. L’utilisation d’antioxydants montre que ce mécanisme participe de manière directe à l’initiation du processus d’activation des DCs (expression du CD86 et sécrétion d’IL-8) et de l’apoptose. Le stress oxydant, caractérisé par une production d’ERO associée à une chute du potentiel membranaire mitochondrial et une déplétion en glutathion intracellulaire, est un acteur majeur de la signalisation induite par les allergènes et notamment dans la réponse induite par le thimerosal et le DNCB. Plus particulièrement, ce travail démontre le rôle des groupements thiols dans l’initiation de la transduction du signal aboutissant à l’activation des DCs. Par ailleurs, une signalisation calcique, dépendante du stress oxydant, a également été mise en évidence en réponse aux allergènes. Ces résultats mettent en valeur l’importance de l’étude de la réactivité des allergènes vis-à-vis des groupements thiols et de la nécessité de tenir compte du potentiel oxydant (rédox) des haptènes ainsi que du métabolisme cellulaire dans la mise en place de modèles prédictifs in vitro. / Allergic Contact Dermatitis (ACD) resulting from skin sensitization is a frequent inflammatory skin disease linked to the use of chemicals, called haptens. At this time, the sensitizing potential of a new chemical is evaluated on animal models. However, new European legislation requires alternative methods for skin sensitization. In this context, a better knowledge of ACD and the capacity to reproduce in vitro its mechanisms lead to the development of new alternative methods. The aim of this study performed with human dendritic cells (DCs) and the human cell line U937 was to determine the early events involved in dendritic cell activation induced by contact sensitizers and especially by the mercury compound thimerosal. Data show that oxidative stress induced by sensitizers is an early signaling event leading to DC activation (expression of CD86 and IL-8 release) and to apoptosis. Using antioxidants, our data show that oxidative stress, characterized by ROS production in correlation with the depletion of the mitochondrial membrane potential and of intracellular glutathione, is a key player in signal transduction induced by sensitizers, especially in the response of DCs towards thimerosal and DNCB. More specifically, these studies demonstrate that thiol groups play a direct role in the initiating events leading to DC activation. In addition, calcium influx was detected in DCs exposed to sensitizers, in correlation with oxidative stress. These data highlight the great interest in the development of a hapten-protein binding assay based on thiol groups and the necessity to better understand the redox status of chemicals as well as cell metabolism for predicting skin sensitization.

O objetivo deste estudo foi avaliar o efeito da sinvastatina, isolada e associada ao α-tocoferol e à L-arginina, sobre os inibidores endógenos da óxido nítrico sintase, os metabólitos do óxido nítrico e tióis, em pacientes hipercolesterolêmicos. Analisou-se um grupo de 16 pacientes hipercolesterolêmicos que seguiram o seguinte protocolo: período de washout (sem medicação), 1 mês; sinvastatina (20mg/dia), 2 meses; sinvastatina (20mg/dia) + α-tocoferol (400U/dia), 2 meses; sinvastatina (20mg/dia, washout), 1 mês; sinvastatina (20mg/dia) + L-arginina (7g/dia), 2 meses. A sinvastatina reduziu significativamente as concentrações do colesterol total e LDL-colesterol e a razão LDL-colesterol/HDL-colesterol. O tratamento com sinvastatina, isolada e associada ao α-tocoferol, promoveu diminuição nas concentrações de S-nitrosotióis. A L-arginina associada à sinvastatina, aumentou os níveis de colesterol total quando comparada com a sinvastatina isoladamente. As concentrações plasmáticas de α-tocoferol e L-arginina não aumentaram em decorrência da suplementação, devido à grande dispersão dos dados obtidos, embora as medianas das concentrações plasmáticas de Larginina e α-tocoferol tenham sido mais elevadas após as suplementações. O tratamento com sinvastatina, isolada ou associada à L-arginina e ao α-tocoferol, não alterou as concentrações dos inibidores endógenos da óxido nítrico sintase (ADMA e SDMA), dos metabólitos do óxido nítrico, da nitrotirosina total e dos tióis analisados. / The aim of this study was to evaluate the effect of sinvastatin, isolated and associated to α-tocopherol and to L-arginine, on the endogenous inhibitors of nitric oxide synthase, on nitric oxide metabolytes and thiols, in hypercholesterolemic patients. A group of 16 hypercholesterolemic patients were analysed, acconting to the protocol: a washout period (without medication) of 1 month, sinvastatin (20 mg/day) for 2 months; sinvastatin (20 mg/day) + α-tocopherol (400U/day) for 2 months; sinvastatin (20 mg/day) for 1 months (washout period), sinvastatin (20 mg/day) + L-arginine (7g/day) for 2 months. Sinvastatin significantly reduced the concentrations of total cholesterol and LDL-cholesterol, as well as the LDL-cholesterol/HDLcholesterol ratio. The treatment with sinvastatina, alone and associate to α-tocoferol, resulted in a reduction of RSNO concentration. The L-arginine associated with sinvastatin, increase the level of total cholesterol as compared with simvastatin alone. The plasma concentrations of a-tocopherol and Larginine did not increase following supplementation due to the large dispersion of the data obtained, even though the median plasma concentrations of L-arginine and a-tocopherol were elevated after supplementation. Treatment with simvastatin, alone or associated to L-arginine and a-tocopherol did not alter the concentrations of the endogenous inhibitors of nitric oxide synthase (ADMA and SDMA), or that of nitric oxide metabolytes, total nitrotyrosine or the thiols analysed.

Improvement in the in vitro oxidative folding of disulfide-containing proteins, such as extracellular and pharmaceutically important proteins, is required. Traditional folding methods using small molecule aliphatic thiol and disulfide, such as glutathione (GSH) and glutathione disulfide (GSSG) are slow and low yielding. Small molecule aromatic thiols and disulfides show great potentiality because aromatic thiols have low pKa values, close to the thiol pKa of protein disulfide isomerase (PDI), higher nucleophilicity and good leaving group ability. Our studies showed that thiols with a positively charged group, quaternary ammonium salts (QAS), are better than thiols with negatively charged groups such as phosphonic acid and sulfonic acid for the folding of bovine pancreatic trypsin inhibitor (BPTI). An enhanced folding rate of BPTI was observed when the protein was folded with a redox buffer composed of a QAS thiol and its corresponding disulfide. Quaternary ammonium salt (QAS) thiols and their corresponding disulfides with longer alkyl side chains were synthesized. These QAS thiols and their corresponding disulfides are promising small molecule thiols and disulfides to fold reduced BPTI efficiently because these thiols are more hydrophobic and can enter the core of the protein. Conformational changes of disulfide-containing proteins during oxidative folding influence the folding pathway greatly. We performed the folding of BPTI using targeted molecular dynamics (TMD) simulation and investigated conformational changes along with the folding pathway. Applying a bias force to all atoms versus to only alpha carbons and the sulfur of cysteines showed different folding pathways. The formation of kinetic traps N' and N* was not observed during our simulation applying a bias force to all atoms of the starting structure. The final native conformation was obtained once the correct antiparallel β-sheets and subsequent Cys14-Cys38 distance were decreased to a bond distance level. When bias force was applied to only alpha carbons and the sulfur of cysteines, the distance between Cys14-Cys38 increased and decreased multiple times, a structure similar to the confirmation of N*, NSH were formed and native protein was ultimately obtained. We concluded that there could be multiple pathways of conformational folding which influence oxidative folding.

The effects of crop load and berry exposure on the composition of Marlborough Sauvignon blanc grapes and wine from the Brancott vineyard, Blenheim, were explored. Commercially grown, 2-cane and 4-cane Sauvignon blanc vines were used with a row orientation of north-south. Two exposure treatments were imposed in the following manner: complete leaf removal was undertaken in the fruit zone and 50% shade cloth was erected to give a uniform shading treatment to half the trial vines. Weekly thirty-berry and whole bunch samples were taken from each of the 32 plots with the exception of the veraison period when two samples per week were taken. Vine vigour was assessed using pruning and leaf area per vine data. Harvest occurred on different dates for 2-cane and 4-cane pruned vines so that fruit attained from both treatments had similar °Brix. Fruit was processed at the Lincoln University winery. Must analysis and wine analysis were undertaken. As expected, 4-cane vines had almost double the yield of 2-cane vines. Higher crop load significantly reduced leaf area per shoot and shoot thickness. Lower leaf area to fruit ratio for 4-cane berries resulted in delayed onset of veraison and slowed the rate of sugar accumulation. Crop load, which limited leaf area to fruit ratio, appeared to be the dominant factor in determining timing of grape physiological ripeness as expressed by °Brix over other factors such as fruit exposure. Malic acid, tartaric acid, IPMP (iso-propylmethoxypyrazine) and IBMP (iso-butyl-methoxypyrazine) were lower at equivalent °Brix in 4-cane compared with 2-cane berries. Significantly higher concentrations of quercetin were found in exposed compared to shaded berries. Must analysis showed a significant influence of crop load on berry titratable acidity and pH, reflecting berry ripening results. Exposure significantly increased the concentrations of nitrogenous compounds in 4-cane must yet showed no influence on 2-cane must. After wine processing lower malic acid concentrations in wines made from 100% exposed fruit became evident in lower wine titratable acidity but showed no influence on wine pH. Bentonite addition to wines had a small but statistically significant influence on wine by reducing pH, titratable acidity and alcohol. Bound sulphur concentrations were significantly higher in 4-cane versus 2-cane wines. At harvest, methoxypyrazine levels in grapes and wines were very low; IBMP concentrations where significantly lower than those normally found in Sauvignon blanc wines from Marlborough. This was attributed to the absence of basal leaves from the shoots of ripening berries. The results suggest that leaf area to fruit ratio is a powerful determinant of grape and wine quality.

L'eczéma allergique de contact (EAC) est une pathologie inflammatoire cutanée de plus en plus fréquente. Il s'agit d'une sensibilisation vis-à-vis de substances chimiques, appelées haptènes, qui sont en contact répété avec la peau. A l'heure actuelle, le pouvoir sensibilisant d'une molécule est évalué principalement grâce à des modèles animaux. Cependant, dans un contexte européen exigeant le développement de méthodes alternatives, la compréhension et la reproduction in vitro des mécanismes de l'EAC permettent le développement de nouvelles stratégies. Le but de ce travail, réalisé sur des cellules dendritiques (DCs) et la lignée humaine U937, est de mettre en évidence les événements précoces de la signalisation intracellulaire à l'origine de l'activation des DCs induite par des allergènes, et notamment par le composé mercurique thimerosal. Les résultats obtenus démontrent que l'induction d'un stress oxydant par les allergènes est un mécanisme induit précocement. L'utilisation d'antioxydants montre que ce mécanisme participe de manière directe à l'initiation du processus d'activation des DCs (expression du CD86 et sécrétion d'IL-8) et de l'apoptose. Le stress oxydant, caractérisé par une production d'ERO associée à une chute du potentiel membranaire mitochondrial et une déplétion en glutathion intracellulaire, est un acteur majeur de la signalisation induite par les allergènes et notamment dans la réponse induite par le thimerosal et le DNCB. Plus particulièrement, ce travail démontre le rôle des groupements thiols dans l'initiation de la transduction du signal aboutissant à l'activation des DCs. Par ailleurs, une signalisation calcique, dépendante du stress oxydant, a également été mise en évidence en réponse aux allergènes. Ces résultats mettent en valeur l'importance de l'étude de la réactivité des allergènes vis-à-vis des groupements thiols et de la nécessité de tenir compte du potentiel oxydant (rédox) des haptènes ainsi que du métabolisme cellulaire dans la mise en place de modèles prédictifs in vitro.

This thesis mainly deals with the development of photochemical approaches to immobilize carbohydrates on surfaces for glycobiological studies. These approaches have been incorporated into a number of state-of-the-art nanobio-platforms, including carbohydrate microarrays, surface plasmon resonance (SPR), quartz crystal microbalance (QCM), atomic force microscopy (AFM), and glyconanomaterials. All the surfaces have displayed good binding capabilities and selectivities after functionalization with carbohydrates, and a range of important data have been obtained concerning surface characteristics and carbohydrate-protein interactions, based on the platforms established. Besides, a variety of non-carbohydrate and carbohydrate-based molecules have been synthesized, during which process the mutarotation of 1-glycosyl thiols and the stereocontrol in 1-S-glycosylation reactions have been thoroughly studied. / QC 20111004

Introdução: A fisiopatologia da doença de Parkinson está associada a lesões por estresse oxidativo/nitrosativo. O ferro encontra-se acumulado na substância negra (SN) de pacientes com DP e está relacionado com esse dano através das espécies reagentes de oxigênio (EROs) e de nitrogênio (ERNs) na reação de Fenton. EROs e ERNs são produzidas normalmente em processos celulares e inflamatórios, e controladas por sistemas antioxidantes. Objetivo: Avaliar níveis periféricos de ferro em pacientes com DP para determinar se acúmulo na SN está relacionado com níveis elevados no sangue. Determinar biomarcadores periféricos confiáveis de estresse oxidativo/nitrosativo Métodos: Selecionados 40 pacientes com DP e 46 indivíduos controles para comparar níveis séricos de ferro, ferritina e transferrina, e de biomarcadores de estresse oxidativo/nitrosativo: superóxido dismutase (SOD), catalase, óxido nítrico (NOx), substâncias reativas ao ácido tiobarbitúrico (TBARS), tióis não-proteicos, “advanced oxidation protein products” (AOPP), “ferric reducing ability of plasma” (FRAP), NTPDases, ecto-5’-nucleotidase, adenosina deaminase (ADA), mieloperoxidase, albumina modificada pela isquemia (IMA) e vitamina C. Resultados: Níveis de ferro estavam diminuídos em pacientes com DP, enquanto ferritina e transferrina não mostraram diferença. Os biomarcadores de estresse oxidativo como TBARS, AOPP, NTPDases, IMA, mieloperoxidase, FRAP, vitamina C e tiois não-proteicos encontraram-se significativamente aumentados na DP. SOD, catalase, ecto-5’-nucleotidase não foram diferentes entre os grupos e os marcadores NOx e ADA foram significativamente aumentados nos controles. Nenhuma correlação foi encontrada entre os biomarcadores e dados sociodemográficos e de características da doença. Conclusão: Níveis plasmáticos de ferro encontram-se diminuídos em pacientes com DP comparados com controles saudáveis. Os biomarcadores TBARS, AOPP, NTPDases, IMA e mieloperoxidase mostraram-se confiáveis para lesão oxidativa, enquanto tióis não-proteicos, FRAP e vitamina C demonstram diminuição da capacidade antioxidante na DP. / Background: Parkinson’s disease (PD) pathophysiology is associated with oxidative/nitrosative stress damage. Iron accumulates in the substantia nigra (SN) of PD patients and is related to this damage along with oxygen and nitrogen reactive species (ROS, RNS) through Fenton reaction. ROS and RNS are normally produced in cell and inflammatory processes, controlled by antioxidant systems. Objective: To determine peripheral levels of iron, ferritin and transferrin in PD patients to evaluate whether iron accumulation in the SN could be related to serum levels. To determine reliable peripheral biomarkers of oxidative/nitrative stress. Methods: Forty PD patients and 46 controls were selected to compared serum levels of iron, ferritin, transferrin and oxidative/nitrative stress biomarkers: superoxide dismutase (SOD), catalase, nitric oxide (NOx), thiobarbituric acid reactive substances (TBARS), non-protein thiols, advanced oxidation protein products (AOPP), ferric reducing ability of plasma (FRAP), NTPDases, ecto-5’-nucleotidase, adenosine deaminase (ADA), myeloperoxidase, ischemic-modified albumin (IMA) and vitamin C. Results: Iron levels were decreased in patients with PD, while ferritin and transferrin were not different. Oxidative stress biomarkers, TBARS, AOPP, NTPDases, IMA, myeloperoxidase, FRAP, vitamin C and non-proteic thiols were significantly higher in PD. SOD, catalase, ecto-5’-nucleotidase were not different between the groups and biomarkers NOx and ADA were significantly increased in the controls. No correlation was found between biomarkers and sociodemographic and disease data. Conclusion: Plasmatic levels of iron are decreased in patients with PD compared to healthy controls. Biomarkers TBARS, AOPP, NTPDases, IMA and myeloperoxidase presented as reliable to measure oxidative/nitrative damage, while non-proteic thiols, FRAP and vitamin C show a decrease in the antioxidant capacity in PD.

Introdução: A fisiopatologia da doença de Parkinson está associada a lesões por estresse oxidativo/nitrosativo. O ferro encontra-se acumulado na substância negra (SN) de pacientes com DP e está relacionado com esse dano através das espécies reagentes de oxigênio (EROs) e de nitrogênio (ERNs) na reação de Fenton. EROs e ERNs são produzidas normalmente em processos celulares e inflamatórios, e controladas por sistemas antioxidantes. Objetivo: Avaliar níveis periféricos de ferro em pacientes com DP para determinar se acúmulo na SN está relacionado com níveis elevados no sangue. Determinar biomarcadores periféricos confiáveis de estresse oxidativo/nitrosativo Métodos: Selecionados 40 pacientes com DP e 46 indivíduos controles para comparar níveis séricos de ferro, ferritina e transferrina, e de biomarcadores de estresse oxidativo/nitrosativo: superóxido dismutase (SOD), catalase, óxido nítrico (NOx), substâncias reativas ao ácido tiobarbitúrico (TBARS), tióis não-proteicos, “advanced oxidation protein products” (AOPP), “ferric reducing ability of plasma” (FRAP), NTPDases, ecto-5’-nucleotidase, adenosina deaminase (ADA), mieloperoxidase, albumina modificada pela isquemia (IMA) e vitamina C. Resultados: Níveis de ferro estavam diminuídos em pacientes com DP, enquanto ferritina e transferrina não mostraram diferença. Os biomarcadores de estresse oxidativo como TBARS, AOPP, NTPDases, IMA, mieloperoxidase, FRAP, vitamina C e tiois não-proteicos encontraram-se significativamente aumentados na DP. SOD, catalase, ecto-5’-nucleotidase não foram diferentes entre os grupos e os marcadores NOx e ADA foram significativamente aumentados nos controles. Nenhuma correlação foi encontrada entre os biomarcadores e dados sociodemográficos e de características da doença. Conclusão: Níveis plasmáticos de ferro encontram-se diminuídos em pacientes com DP comparados com controles saudáveis. Os biomarcadores TBARS, AOPP, NTPDases, IMA e mieloperoxidase mostraram-se confiáveis para lesão oxidativa, enquanto tióis não-proteicos, FRAP e vitamina C demonstram diminuição da capacidade antioxidante na DP. / Background: Parkinson’s disease (PD) pathophysiology is associated with oxidative/nitrosative stress damage. Iron accumulates in the substantia nigra (SN) of PD patients and is related to this damage along with oxygen and nitrogen reactive species (ROS, RNS) through Fenton reaction. ROS and RNS are normally produced in cell and inflammatory processes, controlled by antioxidant systems. Objective: To determine peripheral levels of iron, ferritin and transferrin in PD patients to evaluate whether iron accumulation in the SN could be related to serum levels. To determine reliable peripheral biomarkers of oxidative/nitrative stress. Methods: Forty PD patients and 46 controls were selected to compared serum levels of iron, ferritin, transferrin and oxidative/nitrative stress biomarkers: superoxide dismutase (SOD), catalase, nitric oxide (NOx), thiobarbituric acid reactive substances (TBARS), non-protein thiols, advanced oxidation protein products (AOPP), ferric reducing ability of plasma (FRAP), NTPDases, ecto-5’-nucleotidase, adenosine deaminase (ADA), myeloperoxidase, ischemic-modified albumin (IMA) and vitamin C. Results: Iron levels were decreased in patients with PD, while ferritin and transferrin were not different. Oxidative stress biomarkers, TBARS, AOPP, NTPDases, IMA, myeloperoxidase, FRAP, vitamin C and non-proteic thiols were significantly higher in PD. SOD, catalase, ecto-5’-nucleotidase were not different between the groups and biomarkers NOx and ADA were significantly increased in the controls. No correlation was found between biomarkers and sociodemographic and disease data. Conclusion: Plasmatic levels of iron are decreased in patients with PD compared to healthy controls. Biomarkers TBARS, AOPP, NTPDases, IMA and myeloperoxidase presented as reliable to measure oxidative/nitrative damage, while non-proteic thiols, FRAP and vitamin C show a decrease in the antioxidant capacity in PD.