The polymers are integral part of vast number of products used in day to day life due to their anomalous viscoelastic behaviour. The remarkable flow behaviour exhibited by the polymeric fluids including rod climbing, extrudate swell, tube-less siphon, viscoelastic jet, elastic recoil and sharkskin instability is attributed to the complex microstructures in the polymeric liquids that arise due to the interactions of long chain polymer molecules with each other and with the surrounding fluid particles. The significance of polymer in transportation, packaging, pharmaceutical, chemical, biomedical, textiles, food and polymer processing industries highlights the requirement to comprehend the complex rheology of polymeric fluids. First, we investigate the flow features exhibited by different shear thinning vis-coelastic fluids in rectangular cavities over a wide range of depth to width ratio. We have developed a viscoelastic flow solver in order to perform numerical simulations of highly elastic flow of viscoelastic fluids. In particular, we discuss the simulations of flows of constant viscosity Boger and shear thinning viscoelastic fluids in the complex flow problems using different constitutive equations. The effects of elasticity and inertia on the flow behaviour of two shear thinning vis-coelastic fluids modeled using Giesekus and linear PTT constitutive equations in rectangular cavities is studied. The size of the primary eddies and critical aspect ratio over which the corner eddies merge to yield a second primary eddy in deep cavities is discussed. We demonstrate that the flow in the shallow and deep cavities can be characterized using Weissenberg number, defined based on the shear rate, and Deborah number, specified based on the convective time scale, respectively. The study of flow in driven cavities is important in understanding of the mixing process during synthesis of blends and composites. Next, we study two phase polymeric flow in confined geometries. Nowadays, polymer processing industries prefer to develop newer polymer with the desired material properties mechanically by mixing and blending of different polymer components instead of chemically synthesizing fresh polymer. The microstructure of blends and emulsions following drop deformation, breakup and coalescence during mixing determines its macroscopic interfacial rheology. We developed a two phase viscoelastic flow solver using volume conserving sharp interface volume-of-fluid (VOF) method for studying the dynamics of single droplet subjected to the complex flow fields. We investigated the effects of drop and matrix viscoelasticity on the motion and deformation of a droplet suspended in a fully developed channel flow. The flow behaviour exhibited by Newtonian-Newtonian, viscoelastic-Newtonian, Newtonian-viscoelastic and viscoelastic-viscoelastic drop-matrix systems is presented. The difference in the drop dynamics due to presence of constant viscosity Boger fluid and shear thinning viscoelastic fluid is represented using FENE-CR and linear PTT constitutive equations, respectively. The presence of shear thinning viscoelastic fluid either in the drop or the matrix phase suppresses the drop deformation due to stronger influence of matrix viscoelasticity as compared to the drop elasticity. The shear thinning viscoelastic drop-matrix system further restricts the drop deformation and it displays non-monotonic de-formation. The constant viscosity Boger fluid droplet curbs the drop deformation and exhibits flow dynamics identical to the shear thinning viscoelastic droplet, thus indicating that the nature of the drop viscoelasticity has little influence on the flow behaviour. The matrix viscoelasticity due to Boger fluid increases drop deformation and displays non-monotonic deformation. The drop deformation is further enhanced in the case of Boger fluid in viscoelastic drop-matrix system. Interestingly, the pressure drop due to the presence of viscoelastic drop in a Newtonian matrix is lower than the single phase flow of Newtonian fluid. We also discuss the effects of inertia, surface tension, drop to matrix viscosity ratio and the drop size on these drop-matrix systems. Finally, we investigate the emulsion rheology by studying the motion of a droplet in the square lid driven cavity flow. The viscoelastic effects due to constant viscosity Boger fluid and shear thinning viscoelastic fluid are illustrated using FENECR and Giesekus rheological relations, respectively. The presence of viscoelasticity either in drop or matrix phase boosts the drop deformation with the drop viscoelasticity displaying intense deformation. The drop dynamics due to the droplet viscoelasticity is observed to be independent of the nature of vis-coelastic fluid. The shear thinning viscoelastic matrix has a stronger influence on the drop deformation and orientation compared to the Boger fluid matrix. The different blood components, cells and many materials of industrial importance are viscoelastic in nature. Thus, the present study has significant applications in medical diagnostics, drug delivery, manufacturing and processing industries, study of biological flows, pharmaceutical research and development of lab-on-chip devices.

L’opération morphologique de squelettisation transforme chaque objet d’une image en une forme linéique qui préserve la topologie de ce dernier (propriété d’homotopie). Elle est largement utilisée en biométrie mais aussi dans la reconnaissance des caractères ainsi que pour l’extraction de la microarchitecture osseuse. L’objectif de cette thèse est de développer une méthode de squelettisation appliquée directement sur les niveaux de gris de l’image, ce qui a pour large avantage de s’affranchir de prétraitement comme la binarisation. Une revue des méthodes de squelettisation en niveaux de gris permet de constater que l’amincissement est l’une des approches les plus usitées de par sa propriété d’homotopie. Cependant, cette approche est sensible au bruit de l’image et produit des squelettes sur-connectés. Un premier paramétrage de l’amincissement a été proposé dans la littérature afin d’abaisser des configurations de pixels liées au bruit. La première contribution de ce travail est de proposer un ajustement de ce paramètre basé sur une décision statistique. Il s’agit d’identifier les tests d’hypothèses correspondants aux différentes configurations d’abaissement en vue de fixer ce paramètre de façon locale. Ceci conduit à la mise en place d’une squelettisation appelée Self Contrast Controlled Thinning (SCCT) puisque robuste au bruit tout en s’adaptant automatiquement au contraste de l’image. La squelettisation SCCT est rendue accessible aux domaines d’application grâce à son implantation optimisée basée sur les files d’attente hiérarchiques. Ayant noté le peu d’efforts consacrés à l’évaluation de la squelettisation en niveaux de gris, la deuxième contribution de ce travail est de proposer un protocole visant à évaluer l’opération de squelettisation sur la base des propriétés requises à savoir la préservation de la topologie et de la géométrie. Ce protocole est déroulé sur une base d’images synthétiques et nous permet de comparer notre approche à celles de la littérature. La troisième contribution est de proposer une structuration du squelette en graphe donnant accès aux descripteurs structurels et morphométriques des objets étudiés en vue d’une exploitation du squelette par les experts des domaines d’applications. Dans le cadre du projet Voxelo coordonné par le laboratoire B2OA de l’Université Paris Diderot, cette structuration est exploitée pour extraire les descripteurs de la qualité de la microarchitecture osseuse à partir d’images RX haute résolution. / Skeletonization is an image transformation that aims to represent objects by their medial axis while preserving their topological characteristics (homotopy). It is widely used in biometrics, character recognition and also in the extraction of bone microarchitecture. The objective of this thesis is to develop a skeletonization method applied directly on image gray levels. This has the large advantage of freeing the operation from preprocessing techniques such as binarization. A review of grayscale skeletonization methods shows that the morphological thinning is one of the most used approaches for its topology preservation property. However, this approach is sensitive to image noise and produces inexploitable skeletons. A first parameterization of the thinning process has been proposed in the literature to reduce noise-related information. The first contribution of this work is to propose an adjustment of this parameter based on a statistical decision. To this end, a hypothesis test is identified for each lowering criterion in order to set the thinning parameter locally. This leads us to propose the Self Contrast Controlled Thinning method SCCT that is robust to noise and is automatically adjusted to image contrast. The SCCT is made available to application domains through its optimized implementation based on hierarchical queues. Noticing the lack of efforts to assess grayscale skeletonization, the second contribution of this work is to propose a quantitative evaluation protocol assessing skeletonization with regard to its fundamental properties that are namely the preservation of topology and geometry. This protocol is conducted over a synthetic images database and allows us to compare SCCT to approaches from the literature. The third contribution consists in structuring the skeleton into a graph that gives access to objects structural and morphometric descriptors and enables the exploitation of the skeleton by experts from various fields of application. This structuring is applied in the context of Voxelo project which is coordinated by B2OA laboratory of the University Paris Diderot. In this context, descriptors of bone microarchitecture quality are extracted from X-ray high resolution images.

A growing interest in using forest biomass for bioenergy generation may stimulate intensive harvesting scenarios in Germany. We calculated and compared nutrient exports of conventional stem only (SO), whole tree without needles (WT excl. needles), and whole tree (WT) harvesting in two medium aged Norway spruce (Picea abies L. Karst.) and Scots pine (Pinus sylvestris L.) stands differing in productivity, and related them to soil nutrient pools and fluxes at the study sites. We established allometric biomass functions for each aboveground tree compartment and analyzed their nutrient contents. We analyzed soil nutrient stocks, estimated weathering rates, and obtained deposition and seepage data from nearby Level II stations. WT (excl. needles) and WT treatments cause nutrient losses 1.5 to 3.6 times higher than SO, while the biomass gain is only 1.18 to 1.25 in case of WT (excl. needles) and 1.28 to 1.30 in case of WT in the pine and spruce stand, respectively. Within the investigated 25-year period, WT harvesting would cause exports of N, K+, Ca2+, and Mg2+ of 6.6, 8.8, 5.4, and 0.8 kg·ha−1 in the pine stand and 13.9, 7.0, 10.6, and 1.8 kg·ha−1 in the spruce stand annually. The relative impact of WT and WT (excl. needles) on the nutrient balance is similar in the pine and spruce stands, despite differences in stand productivities, and thus the absolute amount of nutrients removed. In addition to the impact of intensive harvesting, both sites are characterized by high seepage losses of base cations, further impairing the nutrient budget. While intensive biomass extraction causes detrimental effects on many key soil ecological properties, our calculations may serve to implement measures to improve the nutrient balance in forested ecosystems.

Dans ce travail, nous étudions le comportement rhéologique de suspensions concentrées de fibres non-browniennes. Dans un premier temps, nous avons élaboré de nouvelles méthodes expérimentales en géométrie torsionnelle plan-plan, pour mesurer la viscosité, les deux différences de contraintes normales, ainsi que les contraintes normales d'origine particulaire. Nous avons été en mesure d'apporter des résultats originaux qui ont été interprétés en termes d’évolution de la microstructure des suspensions de fibres. Les mesures de la viscosité en régimes stationnaire et transitoire ont permis de mettre en évidence l'importance de l'orientation et de l'effet du confinement sur la viscosité. Par ailleurs, nous avons obtenu pour la première fois des mesures indépendantes des deux différences de contraintes normales en géométrie torsionnelle plan-plan. Les mesures de la pression dans le fluide interstitiel nous ont donné accès aux contraintes normales particulaires et apporté une première mise en évidence expérimentale du phénomène de migration des fibres dans les suspensions non-browniennes. Dans un deuxième temps, nous avons établi deux modèles théoriques qui tentent d'expliquer la rhéofluidification des suspensions de fibres concentrées par une compétition entre des forces adhésives entre fibres et les forces hydrodynamiques et qui proposent un scénario de formation et de destruction d'agrégats. Les résultats de ces modèles sont alors confrontés aux mesures expérimentales et rendent bien compte du comportement de la viscosité sur une large gamme de taux de cisaillement. / In this manuscript we investigate, both experimentally and theoretically, the rheological behavior of concentrated non-Brownian fiber suspensions. The experiments consist in developing new methods for measuring the viscosity, the two normal stress differences as well as the particle normal stresses, in torsional plate-plate geometry. We were able to bring original results that have been interpreted by the evolution of the microstructure of the fiber suspensions during the flow. The experiments in stationary and transient regime highlight the importance of fiber orientation and the effect of the confinement on the viscosity measurement. For the first time, the first and the second normal stress differences have been measured separately in a torsional flow. Furthermore, thanks to the measurement of the pore pressure in the suspensions, an estimation of the particle normal stresses has been carried out and, for the first time the phenomenon of fiber migration in non-Brownian suspensions has been evidenced. From a theoretical point of view, we developed two complementary models that tend to explain shear-thinning behavior in concentrated fiber suspensions by a balance between adhesive and hydrodynamic forces and propose a scenario for the formation and the destruction of aggregates. These models are then tested against experimental measurements in a wide range of shear rates.

<p><b>Part I: Micromechanics of dense suspensions</b></p><p>Particulate suspensions are ubiquitous in the industry & nature. Fresh concrete, uncured solid rocket fuel, & biomass slurries are typical industrial applications, while milk & blood are examples of naturally occurring suspensions. These suspensions exhibit many non-Newtonian properties like rate-dependent rheology & normal stresses. Other than volume fraction, particle material, inter-particle interactions determine the rheological behavior of suspension. The average inter-particle gaps between the neighboring particles decrease significantly as the suspension volume fraction approaches the maximum packing fraction in dense suspensions. So, in this regime, the short-ranged non-contact interactions are important. In addition, the particles come into contact due to asperities on their surfaces. The surface asperities are present even in the case of so-called smooth particles, as particles in real suspensions are not perfectly smooth. Hence, contact forces become one of the essential factors to determine the rheology of suspensions.</p><p> </p><p>Part I of this thesis investigates the effects of microscopic inter-particle interactions on the rheological properties of dense suspensions of non-Brownian particles by employing discrete particle simulations. We show that increasing the roughness size results in a rise in the viscosity & normal stress difference in the suspensions. Furthermore, we observe that the jamming volume fraction decreases with the particle roughness. Consequently, for suspensions close to jamming, increasing the asperity size reduces the critical shear rate for shear thickening (ST) transition, resulting in an early onset of discontinuous ST (DST, a sudden jump in the suspension viscosity) in terms of volume fraction, & enhances the strength of the ST effect. These findings are in excellent agreement with the recent experimental measurements & provide a deeper understanding of the experimental findings. Finally, we propose a constitutive model to quantify the effect of the roughness size on the rheology of dense ST suspensions to span the entire phase-plane. Thus, the constitutive model and the experimentally validated numerical framework proposed can guide experiments, where the particle surface roughness is tuned for manipulating the dense suspension rheology according to different applications. </p><p> </p><p>A typical dense non-Brownian particulate suspension exhibits shear thinning (decreasing viscosity) at a low shear rate followed by a Newtonian plateau (constant viscosity) at an intermediate shear rate values which transition to ST (increasing viscosity) beyond a critical shear rate value and finally, undergoes a second shear-thinning transition at an extremely high shear rate values. This part unifies & quantitatively reproduces all the disparate rate-dependent regimes & the corresponding transitions for a dense non-Brownian suspension with increasing shear rate. The inclusion of traditional hydrodynamic interactions, attractive/repulsive DLVO (Derjaguin and Landau, Verwey and Overbeek), contact interactions, & constant friction reproduce the initial thinning as well as the ST transition. However, to quantitatively capture the intermediate Newtonian plateau and the second thinning, an additional interaction of non-DLVO origin & a decreasing coefficient of friction, respectively, are essential; thus, providing the first explanation for the presence these regimes. Expressions utilized for various interactions and friction are determined from experimental measurements, resulting in an excellent quantitative agreement with previous experiments. </p><p><br></p><p><b>Part II: Motion in a stratified fluid</b></p><p>Density variations due to temperature or salinity greatly influence the dynamics of objects like particles, drops, and microorganisms in oceans. Density stratification hampers the vertical flow & substantially affects the sedimentation of an isolated object, the hydrodynamic interactions between a pair, and the collective behavior of suspensions in various ways depending on the relative magnitude of stratification inertia (advection), and viscous (diffusion) effects. This part investigates these effects and elicits the hydrodynamic mechanisms behind some commonly observed fluid-particle transport phenomena in oceans, like aggregation in horizontal layers. The physical understanding can help us better model these phenomena and, hence, predict their geophysical, engineering, ecological, and environmental implications. </p><p><br></p><p>We investigate the self-propulsion of an inertial swimmer in a linear density stratified fluid using the archetypal squirmer model, which self-propels by generating tangential surface waves. We quantify swimming speeds for pushers (propelled from the rear) and pullers (propelled from the front) by direct numerical solution. We find that increasing stratification reduces the swimming speeds of swimmers relative to their speeds in a homogeneous fluid while reducing their swimming efficiency. The increase in the buoyancy force experienced by these squirmers due to the trapping of lighter fluid in their respective recirculatory regions as they move in the heavier fluid is one of the reasons for this reduction. Stratification also stabilizes the flow around a puller, keeping it axisymmetric even at high inertia, thus leading to otherwise absent stability in a homogeneous fluid. On the contrary, a strong stratification leads to instability in the motion of pushers by making the flow around them unsteady 3D, which is otherwise steady axisymmetric in a homogeneous fluid. Data for the mixing efficiency generated by individual squirmers explain the trends observed in the mixing produced by a swarm of squirmers. </p><p><br></p><p>In addition, the ubiquitous vertical density stratification in aquatic environments significantly alters the swimmer interactions affecting their collective motion &consequently ecological and environmental impact. To this end, we numerically investigate the interactions between a pair of model swimming organisms with finite inertia in a linear density stratified fluid. Depending on the squirmer inertia and stratification, we observe that the squirmer interactions can be categorized as i) pullers getting trapped in circular loops, ii) pullers escaping each other with separating angle decreasing with increasing stratification, iii) pushers sticking to each other after the collision and deflecting away from the collision plane, iv) pushers escaping with an angle of separation increasing with stratification. Stratification also increases the contact time for squirmer pairs. The results presented can help understand the mechanisms behind the accumulation of planktonic organisms in horizontal layers in a stratified environment like oceans and lakes. </p><p><br></p><p>Much work has been done to understand the settling dynamics of spherical particles in a homogeneous and stratified fluid. However, the effects of shape anisotropy on the settling dynamics in a stratified fluid are not entirely understood. To this end, we perform numerical simulations for settling oblate and prolate spheroids in a stratified fluid. We find that both the oblate and prolate spheroids reorient to the edge-wise and partially edge-wise orientations, respectively, as they settle in a stratified fluid completely different from the steady-state broad-side on orientation observed in a homogeneous fluid. We observe that reorientation instabilities emerge when the velocity magnitude of the spheroids falls below a particular threshold. We also report the enhancement of the drag on the particle from stratification. The torque due to buoyancy effects tries to orient the spheroid in an edge-wise orientation, while the hydrodynamic torque tries to orient it to a broad-side orientation. The buoyancy torque dominates below the velocity threshold, resulting in reorientation instability.<br></p>

No description available.

In Valencia region (SE Spain), many post-fire communities are dominated by non-resprouting (seeder) species, because of the long history of land exploitation and subsequent abandonment during the last half of 20th century. These communities accumulate fine dry biomass and, therefore, can burn again easily. In fact, Mediterranean forests are suffering from an increase in wildfire frequency since the early 1970s. Wildfires shape the composition and functioning of Mediterranean ecosystems, but we do not know how these ecosystems respond to both the higher fire recurrence and shorter recovery times expected for future climatic scenarios. In this sense, Aleppo pine forest (Pinus halepensis) is one of the most fire affected vegetation of this type in the Mediterranean Basin and to know how it respond to fire is fundamental to design management plans. After fire, regeneration of this forest can be highly variable, and it can go from extremely dense tree stands (overstocked pine) to treeless shrublands dominated by seeder species. All these regenerated stands are fire prone with limited ability to deliver multiple ecosystem services. Although several management techniques are applied to redirect these post-fire ecosystems towards less vulnerable and more functional communities, we do not know yet which amongst them could serve to foster more diverse and multifunctional landscapes. Therefore, the general objective of this thesis is to investigate the functioning of these Mediterranean ecosystems as consequence of shifts in fire regime and forest management application, using different techniques, in different post-fire regenerated ecosystems (overstocked pine forests and dense shrublands). To do so, we calculate, within Mediterranean Pinus halepensis forests affected by wildfires, the supply of multiple ecosystem services (biodiversity conservation, carbon sequestration, disturbance regulation, food production, supporting services, and multifunctionality), through up to 25 aboveground and belowground attributes. Our main findings are (1) High fire recurrence and time since last fire interacted to determine ecosystem services but did not affect their synergies and trade-offs between them. Their combined effects reduced carbon sequestration and multifunctionality. Disturbance regulation diminished drastically with the first fire, with no effect of further fires. However, their effects dampened, and even became positive, for biodiversity conservation and food production services if provided enough time to recover. (2) Thinning in overstocked pine stands enhances ecosystem attributes associated with biodiversity conservation without compromising the provision of carbon sequestration. After 10 years, two levels of thinning, (600 and 1200 trees·ha-1), similarly affected ecosystem attributes, which suggest that 1200 trees·ha-1 suffice to enhance individual ecosystem attributes. (3) Clearing within dense shrubland dominated by seeder species enhances ecosystem attributes associated with biodiversity conservation without compromising the capacity of ecosystem to sequester carbon. (4) Plantation of resprouting species combined with thinning and clearing, in overstocked pine forests and dense shrublands respectively, can enhance the provision of ecosystem services of disturbance regulation, food production and ecosystem multifunctionality. (5) Prescribed burning reduces the amount of dead fuel, increases biodiversity conservation, and improves food production. However, these effects become negative, in addition to the decline in disturbance regulation and multifunctionality, if prescribed burning is applied frequently. (6) Combining different management activities can enhance the supply of multiple ecosystem services simultaneously by reducing the trade-offs in between them and therefore, establish multifunctional Mediterranean landscapes.

Toward the next generation of nerve guidance conduits (NGCs), novel biomaterials and functionalization concepts are required to address clinical demands in peripheral nerve regeneration (PNR). As a biological polymer with bioactive motifs, gelatinous peptides are promising building blocks. In combination with an anhydride-containing oligomer, a dual-component hydrogel system (cGEL) was established. First, hollow cGEL tubes were fabricated by a continuous dosing and templating process. Conduits were characterized concerning their mechanical strength, in vitro and in vivo degradation and biocompatibility. Second, cGEL was reformulated as injectable shear thinning filler for established NGCs, here tyrosine-derived polycarbonate-based braided conduits. Thereby, the formulation contained the small molecule LM11A-31. The biofunctionalized cGEL filler was assessed regarding building block integration, mechanical properties, in vitro cytotoxicity, and growth permissive effects on human adipose tissue-derived stem cells. A positive in vitro evaluation motivated further application of the filler material in a sciatic nerve defect. Compared to the empty conduit and pristine cGEL, the functionalization performed superior, though the autologous nerve graft remains the gold standard. In conclusion, LM11A-31 functionalized cGEL filler with extracellular matrix (ECM)-like characteristics and specific biochemical cues holds great potential to support PNR.

No description available.

This thesis describes the fabrication and characterization of two-dimensional transition dichalcogenides (2D TMDs) nanolayers for various applications in electronic and opto-electronic devices applications. In Chapter 1, crystal and optical structure of TMDs materials are introduced. Many TMDs materials reveal three structure polytypes (1T, 2H, and 3R). The important electronic properties are determined by the crystal structure of TMDs; thus, the information of crystal structure is explained. In addition, the detailed information of photon vibration and optical band gap structure from single-layer to bulk TMDs materials are introduced in this chapter. In Chapter 2, detailed information of physical properties and synthesis techniques for molybdenum disulfide (MoS2), tungsten disulfide (WS2), and molybdenum ditelluride (MoTe2) nanolayers are explained. The three representative crystal structures are trigonal prismatic (hexagonal, H), octahedral (tetragonal, T), and distorted structure (Tʹ). At room temperature, the stable structure of MoS2 and WS2 is semiconducting 2H phase, and MoTe2 can reveal both 2H (semiconducting phase) and 1Tʹ (semi-metallic phase) phases determined by the existence of strains. In addition, the pros and cons of the synthesis techniques for nanolayers are discussed. In Chapter 3, the topic of synthesized large-scale MoS2, WS2, and MoTe2 films is considered. For MoS2 and WS2 films, the layer thickness is modulated from single-layer to multi-layers. The few-layer MoTe2 film is synthesized with two different phases (2H or 1Tʹ). The all TMDs films are fabricated using two-step chemical vapor deposition (CVD) method. The analyses of atomic force microscopy (AFM), high-resolution transmission electron microscopy (HRTEM), photoluminescence (PL), and Raman spectroscopy confirm that the synthesis of high crystalline MoS2, WS2, and MoTe2 films are successful. The electronic properties of both MoS2 and WS2 exhibit a p-type conduction with relatively high field effect mobility and current on/off ratio. In Chapter 4, vertically-stacked few-layer MoS2/WS2 heterostructures on SiO2/Si and flexible polyethylene terephthalate (PET) substrates is presented. Detailed structural characterizations by Raman spectroscopy and high-resolution/scanning transmission electron microscopy (HRTEM/STEM) show the structural integrity of two distinct 2D TMD layers with atomically sharp van der Waals (vdW) heterointerfaces. Electrical transport measurements of the MoS2/WS2 heterostructure reveal diode-like behavior with current on/off ratio of ~ 104. In Chapter 5, optically uniform and scalable single-layer Mo1-xWxS2 alloys are synthesized by a two-step CVD method followed by a laser thinning. Post laser treatment is presented for etching of few-layer Mo1-xWxS2 alloys down to single-layer alloys. The optical band gap is controlled from 1.871 to 1.971 eV with the variation in the tungsten (W) content, x = 0 to 1. PL and Raman mapping analyses confirm that the laser-thinning of the Mo1-xWxS2 alloys is a self-limiting process caused via heat dissipation to SiO2/Si substrate, resulting in fabrication of spatially uniform single-layer Mo1-xWxS2 alloy films.