Les systèmes de climatisation et de ventilation sont souvent composés de configurations type jets impactant, sur leur partie terminale. Ainsi, les flux d’air soufflés viennent impacter des obstacles munis de fentes, de différentes formes, afin d’améliorer le mélange. Les conditions de confinement et de soufflage provoquent parfois un inconfort au niveau acoustique. Les nuisances acoustiques générées sont dues à un phénomène de boucles de rétroaction se traduisant par l’apparition des sons auto-entretenus. La production du son par un écoulement fluide en champ libre ou en interaction avec une structure a fait l’objet de nombreuses études. Dans le cas d’un champ acoustique et pour un écoulement à faible nombre de Mach la résolution du corollaire énergétique de Howe permet d’évaluer la puissance acoustique générée ou absorbée par les interactions entre le champ acoustique et l’écoulement. Le calcul de cette puissance nécessite la connaissance de trois paramètres : la vorticité, la vitesse et la vitesse acoustique par des méthodes analytiques ou en utilisant des données expérimentales. Expérimentalement, la mesure du champ cinématique, pour en déduire la vorticité, nécessite une technique de mesure tridimensionnelle. Pour cela une plate-forme expérimentale, utilisant de la vélocimétrie Laser, a été développée, et équipée pour générer les écoulements d’un jet plan. Les champs cinématiques de ces écoulements ont été mesurés en utilisant la technique PIV, avec un dispositif de PIV stéréoscopique. Les champs cinématiques de trente plans parallèles ont été mesurés afin d’étudier les champs de vitesses correspondants. Deux méthodes de reconstruction ont été appliquées à ces plans : la POD et la moyenne de phase. Le volume est obtenu par une interpolation des plans reconstruits donnant accès aux trois composantes de la vitesse. Pour valider ces méthodes de reconstruction en 3D à faible coût, elles étaient comparées à des mesures expérimentales réalisées par le même dispositif expérimental, dans les mêmes conditions, par la PIV tomographique donnant accès aux champs cinématiques tridimensionnels. / Air conditioning and ventilation systems are often composed of jets having a configuration of an impinging jet, on their end part. Thus, the blown airflows impact slotted obstacles of different shapes to improve mixing. The conditions of confinement and blowing sometimes cause acoustic incompatibility. The acoustic noises generated are due to a phenomenon of feedback loops resulting of the appearance of self-sustained sounds. The production of sound by a free flow or in interaction with a structure has been the subject of many studies. In the case of an acoustic field and for a flow of low Mach number, Howe's energetic correlation is used to evaluate the acoustic power generated or absorbed by the interactions between the acoustic field and the flow. The calculation of this power requires the knowledge of three parameters : vorticity, velocity and acoustic velocity by analytical methods or by using experimental data. Experimentally, the measurement of the kinematic field, to deduce the vorticity, requires a three-dimensional measurement technique. For this purpose, an experimental platform, using laser velocimetry, has been developed and equipped to generate flows of a plane jet. The kinematic fields of these flows were measured using the PIV technique, with a stereoscopic PIV device. The kinematic fields of thirty parallel planes were measured to study the corresponding velocity fields. Two reconstruction methods have been applied to these plans : the POD and the phase average. The volume is obtained by an interpolation of the reconstructed planes giving access to the three components of the velocity. To validate these low-cost 3D reconstruction methods, they were compared to experimental measurements made by the same experimental setup, under the same conditions, by using the tomographic PIV giving access to the three-dimensional kinematic fields.

A hiperplasia do processo coronóide é uma afecção que causa uma limitada mobilidade mandibular e conseqüente limitação de abertura da boca. Não apresenta sintomatologia dolorosa, e tem progressão lenta, levando o paciente a procurar por tratamento somente se a limitação de abertura for severa a ponto de prejudicar as funções mastigatórias normais. Muitos casos levam clínicos a tratarem o paciente como portador de disfunção da articulação têmporo mandibular (DTM). Este trabalho se propõe a avaliar a tomografia computadorizada (TC) como método para auxiliar na elaboração do diagnóstico e no planejamento cirúrgico desta anomalia, estudando a presença da hiperplasia do processo coronóide pela observação de imagens obtidas por meio da Tomografia Computadorizada Helicoidal, considerando as imagens volumétricas multiplanar e 3D, e as suas associações. Foram utilizadas imagens de arquivo dos exames de tomografia computadorizada helicoidal de 152 pacientes que apresentavam sinais e sintomas de Disfunção Têmporo Mandibular (DTM) encaminhados para a Unidade de Diagnóstico Dento-Maxilo-Facial da Clínica Félix Boada, na cidade de Caracas - Venezuela, para exame tomográfico da ATM. Dos 152 pacientes, foram selecionados 20 casos, que eram de portadores de sinais e/ou sintomas de Disfunção Têmporo Mandibular, mas que, ao exame realizado, constatou-se a presença da hiperplasia do processo coronóide. Os dados dos 20 pacientes foram comparados, de maneira a identificar as possíveis diferenças entre as opiniões de 5 cirurgiões dentistas radiologistas e de 5 cirurgiões dentistas buco-maxilo-faciais. Utilizou-se a técnica da Análise de Médias (Analysis of Means - ANOM), que calcula uma média geral entre os 5 observadores de cada especialidade, e um intervalo que indica quais observadores tiveram opiniões semelhantes e quais tiveram opiniões diversas. Depois foi feita a comparação entre os dois grupos, utilizando o teste das proporções. Em conclusão, os observadores acharam as imagens MPR mais esclarecedoras que as reconstruções volumétricas 3D, na maioria dos casos de hiperplasia do processo coronóide, quando esses recursos foram avaliados separadamente. Contudo, acharam imprescindível a utilização de ambas as imagens, em associação ou não, indicando-as para o estudo da hiperplasia do processo coronóide. A hipomobilidade foi observada na articulação temporomandibular, no lado acometido pela hiperplasia do processo coronóide, em 55,2% dos casos / The Coronoid Process Hyperplasia is an affection that causes a limited mandibular mobility and a consequent limitation in mouth opening. It doesn’t present any painful symptomatology and has a slow progression, leading the patient to look for treatment only when the opening limitation is severe to the point of impairing regular masticatory functions. Many cases lead clinicians to treat the patient as he had a temporomandibular dysfunction. This work proposed an evaluation of the CT as an auxiliary method in the elaboration of the diagnosis and in the surgical planning of that anomaly by studying the presence of the Coronoid Process Hyperplasia through the observation of images obtained by means of the Helicoidal Computerized Tomography, considering the volumetric multiplane and 3D images and their associations. Filed images of Helicoidal Computerized Tomography were used, belonging to the examination of 152 patients who presented symptoms of temporomandibular dysfunction and were all directed to the Dento-Maxillo-Facial Diagnosis Unit of the Clinica Felix Boada in the city of Caracas – Venezuela for TMA tomographic examination. Of the 152 patients 20 were selected who showed signs or symptoms of TMA dysfunction and Coronoid Process Hyperplasia was detected. Data of the 20 patients were compared in order to identify possible differences among the opinions of 5 radiologist specialists and 5 buco-maxillo -facial specialists. The Analysis of Means – ANOM was used to calculate a general average among the 5 specialists in each specialty and a gap that opinions and which ones had different opinions. Afterwards the comparison between the 2 groups was made using the Proportion Test. The observers concluded that the MPR images were more clarifying than the 3D images in most of the cases of coronoid process hyperplasia, especially when those resources were evaluated separately. Although they found vital the utilization of both images in association or not and indicated them to the study of the Coronoid Process Hyperplasia. Hypo mobility was observed in the TMA in the affected side in 55,2% of the cases

Submitted by Cássia Santos (cassia.bcufg@gmail.com) on 2017-01-04T09:35:23Z No. of bitstreams: 2 Tese - Iussif Mamede Neto - 2016.pdf: 8414229 bytes, checksum: dbd825fbd28378443533fac54c7a09c1 (MD5) license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5) / Approved for entry into archive by Luciana Ferreira (lucgeral@gmail.com) on 2017-01-04T09:59:04Z (GMT) No. of bitstreams: 2 Tese - Iussif Mamede Neto - 2016.pdf: 8414229 bytes, checksum: dbd825fbd28378443533fac54c7a09c1 (MD5) license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5) / Made available in DSpace on 2017-01-04T09:59:04Z (GMT). No. of bitstreams: 2 Tese - Iussif Mamede Neto - 2016.pdf: 8414229 bytes, checksum: dbd825fbd28378443533fac54c7a09c1 (MD5) license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5) Previous issue date: 2016-11-18 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES / Objective: To evaluate transportation (T) and centering ability (CA) of root canal preparations using continuous or reciprocating nickel-titanium endodontic files. Material and methods: Ninety-six mesiobuccal root canals of mandibular first and second molars were randomly divide into 6 groups (n=16) according to the rotary file used: Group 1- ProTaper Next®; Group 2- ProTaper Gold®; Group 3- Mtwo®; Group 4- BioRaCe®; Group 5- WaveOne Gold®; Group 6- Reciproc®. Root canals were prepared according to manufacturer’s instructions. Cone-beam computed tomography scans were obtained before and after canal preparation. Measurements were made at five different points: 2, 3 and 4 mm from the apex and 2, 3 and 4 mm below furcation. Transportation and centering ability were analyzed following the recommendations made by Gambill et al. (1996). Results: The greatest mesiodistal (MD) transportation (T) was found for Reciproc® files (p<0.05), and the greatest buccolingual (BL) T, for Reciproc®, ProTaper Gold® and ProTaper Next® files (p<0.05). The greatest mesiodistal (MD) centering ability (CA) was found for BioRaCe® files (p<0.05), and the greatest buccolingual (BL) CA, for BioRaCe® and Mtwo® files (p<0.05). Conclusion: All systems produced root canal transportation. No file system achieved perfect CA of root preparation. Reciproc® files had the greatest MD T and BL T. BioRaCe® files had the greatest MD CA, whereas BL CA was similar for BioRaCe® and Mtwo® files. / Objetivo: Avaliar o índice de transporte (IT) e a capacidade de centralização (CC) do preparo do canal radicular com instrumentos endodônticos de níquel-titânio acionados em rotação contínua e reciprocante. Materiais e métodos: Noventa e seis canais mesiovestibulares de molares inferiores (primeiro e segundo) foram aleatoriamente divididos em 06 grupos (n=16), de acordo com o instrumento rotatório utilizado: Grupo 1- ProTaper Next®; Grupo 2- ProTaper Gold®; Grupo 3- Mtwo®; Grupo 4- BioRaCe®; Grupo 5- WaveOne Gold®; Grupo 6- Reciproc®. A técnica de preparo do canal radicular obedeceu a orientação dos fabricantes. Tomografia computadorizada de feixe cônico foi realizada antes e após o preparo dos canais radiculares. Foram estabelecidos 06 níveis para a realização das mensurações nas imagens: 2, 3 e 4 mm aquém do vértice radicular e 2, 3 e 4 mm abaixo da furca. O índice de transporte e a capacidade de centralização foram analizados conforme proposto por Gambill et al. (1996). Resultados: O maior IT no sentido mesiodistal (MD) foi observado com o Reciproc® (p<0,05), enquanto que no sentido vestíbulolingual (VL) foram verificados com Reciproc®, ProTaper Gold® e ProTaper Next® (p<0,05). Os maiores valores de CC(MD) e (VL) foram observados com os sistemas BioRaCe® (p<0,05) e BioRaCe® e Mtwo® (p<0,05), respectivamente. Conclusão: Todos os sistemas promoveram transporte do canal radicular. Nenhum instrumento mostrou capacidade de centralização do preparo perfeita. O Reciproc® obteve os valores maiores de IT(MD) e (VL). O sistema BioRaCe® apresentou a maior CC(MD), enquanto que no sentido (VL) o BioRaCe® e Mtwo® mostraram capacidades similares.

Os métodos incrementais pertencem a uma classe de métodos iterativos que divide o conjunto de dados em subconjuntos ordenados, e que atualiza a imagem ao processar cada subconjunto (sub-iterações). Isso acelera a convergência das reconstruções, e imagens de qualidade são obtidas em menos iterações. No entanto, a cada sub-iteração é necessário calcular os operadores de projeção e retroprojeção, resultando no custo computacional de ordem O(n3) para a reconstrução de imagens de dimensão × . Por outro lado, algumas alternativas baseadas na interpolação em uma grade regular no espaço de Fourier ou em transformadas rápidas não-uniformes, dentre outras ideias, foram desenvolvidas a fim de aliviar esse custo computacional. Além disso, diversas abordagens foram bem sucedidas em acelerar o cálculo das iterações de algoritmos clássicos, mas nenhuma havia sido utilizada em conjunto com os métodos incrementais. Neste trabalho é proposta uma nova abordagem em que a técnica de transformada rápida de Fourier não uniforme (NFFT) é utilizada nas sub-iterações de métodos incrementais com o objetivo de efetuar de forma eficiente os cálculos numericamente mais intensos: a projeção e a retroprojeção, resultando em métodos incrementais com complexidade O(n2 log n ). Os métodos propostos são aplicados à tomografia por radiação síncrotron e os resultados da pesquisa mostram um bom desempenho. / Incremental methods belong to a class of iterative methods that divide the data set into ordered subsets, and which update the image when processing each subset (sub-iterations). It accelerates the reconstruction convergence and quality images are obtained in fewer iterations. However, it is necessary to compute the projection and backprojection operators in each sub-iteration, resulting in the computational cost of O(n3) flops for × images. On the other hand, some alternatives based on interpolation over a regular grid on the Fourier space or on nonequispaced fast transforms, among other ideas, were developed in order to alleviate the computational cost. In addition, several approaches substantially speed up the computation of the iterations of classical algorithms, but the incremental methods had not been benefited from these techniques. In this work, a new approach is proposed in which the nonequispaced fast Fourier transform (NFTT) is used in each subiteration of incremental methods in order to perform the numerically intensive calculations efficiently: the projection and backprojection, resulting in incremental methods with complexity O(n2 log n ). The proposed methods are applied to the synchrotron radiation tomography and the results show a good performance.

Nous avons développé un microscope tomographique diffractif en réflexion, qui permet d’observer la surface d’un échantillon avec une résolution latérale améliorée comparée à un microscope holographique conventionnel. À partir des même données expérimentales (les hologrammes acquis sous différents angles d’illumination), des mesures à haute précision longitudinale peuvent être réalisées sur la surface d’un échantillon purement réfléchissant, par reconstruction du profil de hauteur à partir de la phase. Cette méthode d’imagerie multimodale présente plusieurs avantages comparée aux mesures en holographie interférométrique classique : amélioration de la résolution latérale sur la partie diffractive, déroulement de phase facilité, réduction du bruit cohérent, l’ensemble étant associé à la grande précision longitudinale fournie par les mesures de phase. Nous montrons ces possibilités en imageant divers échantillons minces. / We have developed a tomographic diffractive microscope in reflection, which permits observation of sample surfaces with an improved lateral resolution, compared to a conventional holographic microscope. From the same set of data, high-precision measurements can be performed on the shape of the reflective surface by reconstructing the phase of the diffracted field. doing so allows for several advantages compared to classical holographic interferometric measurements: improvement in lateral resolution, easier phase unwrapping, reduction of the coherent noise, combined with the high-longitudinal precision provided by interferometric phase measurements. We demonstrate these capabilities by imaging various test samples.

Die 3D Particle Tracking Velocimetry (3D PTV) ist eine Methode zur bildbasierten Bestimmung von Geschwindigkeitsfeldern in Gas- oder Flüssigkeitsströmungen. Dazu wird die Strömung mit Partikeln markiert und durch ein Mehrkamerasystem beobachtet. Das Ergebnis der Datenauswertung sind 3D Trajektorien einer großen Anzahl von Partikeln, die zur statistischen Analyse der Strömung genutzt werden können. In der vorliegenden Arbeit werden verschiedene neu entwickelte Modelle gezeigt, die das Einsatzspektrum vergrößern und die Leistungsfähigkeit der 3D PTV erhöhen. Wesentliche Neuerungen sind der Einsatz eines Spiegelsystems zur Generierung eines virtuellen Kamerasystems, die Modellierung von komplex parametrisierten Trennflächen der Mehrmedienphotogrammetrie, eine wahrscheinlichkeitsbasierte Trackingmethode sowie eine neuartige Methode zur tomographischen Rekonstruktion von Rastervolumendaten. Die neuen Modelle sind an drei realen Experimentieranlagen und mit synthetischen Daten getestet worden. Durch den Einsatz eines Strahlteilers vor dem Objektiv einer einzelnen Kamera und vier Umlenkspiegeln, positioniert im weiteren Strahlengang, werden vier virtuelle Kameras generiert. Diese Methode zeichnet sich vor allem durch die Wirtschaftlichkeit als auch durch die nicht notwendige Synchronisation aus. Vor allem für die Anwendung im Hochgeschwindigkeitsbereich sind diese beiden Faktoren entscheidend. Bei der Beobachtung von Phänomenen in Wasser kommt es an den Trennflächen verschiedener Medien zur optischen Brechung. Diese muss für die weitere Auswertung zwingend modelliert werden. Für komplexe Trennflächen sind einfache Ansätze über zusätzliche Korrekturterme nicht praktikabel. Der entwickelte Ansatz basiert auf der mehrfachen Brechung jedes einzelnen Bildstrahls. Dazu müssen die Trennflächenparameter und die Kameraorientierungen im selben Koordinatensystem bekannt sein. Zumeist wird die Mehrbildzuordnung von Partikeln durch die Verwendung von Kernlinien realisiert. Auf Grund von instabilen Kameraorientierungen oder bei einer sehr hohen Partikeldichte sind diese geometrischen Eigenschaften nicht mehr ausreichend, um die Mehrbildzuordnung zu lösen. Unter der Ausnutzung weiterer geometrischer, radiometrischer und physikalischer Eigenschaften kann die Bestimmung der 3D Trajektorien dennoch durchgeführt werden. Dabei werden durch die Analyse verschiedener Merkmale diejenigen ausgewählt, welche sich für die spatio-temporale Zuordnung eignen. Die 3D PTV beruht auf der Diskretisierung der Partikelabbildungen im Bildraum und der anschließenden Objektkoordinatenbestimmung. Eine rasterbasierte Betrachtungsweise stellt die tomographische Rekonstruktion des Volumens dar. Hierbei wird die Intensitätsverteilung wird im Volumen rekonstruiert. Die Bewegungsinformationen werden im Anschluss aus den Veränderungen aufeinander folgender 3D-Bilder bestimmt. Durch dieses Verfahren können Strömungen mit einer höheren Partikeldichte im Volumen analysiert werden. Das entwickelte Verfahren basiert auf der schichtweisen Entzerrung und Zusammensetzung der Kamerabilder. Die entwickelten Modelle und Ansätze sind an verschiedenen Versuchsanlagen erprobt worden. Diese unterschieden sich stark in der Größe (0,5 dm³ – 20 dm³ – 130 m³) und den vorherrschenden Strömungsgeschwindigkeiten (0,3 m/s – 7 m/s – 0,5 m/s). / 3D Particle Tracking Velocimetry (3D PTV) is an image based method for flow field determination. It is based on seeding a flow with tracer particles and recording the flow with a multi camera system. The results are 3D trajectories of a large number of particles for a statistical analysis of the flow. The thesis shows different novel models to increase the spectrum of applications and to optimize efficiency of 3D PTV. Central aspects are the use of the mirror system to generate a virtual multi camera system, the modelling of complex interfaces of multimedia photogrammetry, a probability based tracking method and a novel method for tomographic reconstruction of volume raster data. The improved models are tested in three real testing facilities and with synthetic data. Using a beam splitter in front of the camera lens and deflecting mirrors arranged in the optical path, a four headed virtual camera system can be generated. This method is characterised by its economic efficiency and by the fact that a synchronisation is not necessary. These facts are important especially when using high speed cameras. When observing phenomena in water, there will be refraction at the different interfaces. This has to be taken into account and modelled for each application. Approaches which use correction terms are not suitable to handle complex optical interfaces. The developed approach is based on a multiple refraction ray tracing with known interface parameters and camera orientations. Mostly the multi image matching of particles is performed using epipolar geometry. Caused by the not stable camera orientation or a very high particle density this geometric properties are not sufficient to solve the ambiguities. Using further geometrical radiometrical and physical properties of particles, the determination of the 3D trajectories can be performed. After the analysis of different properties those of them are chosen which are suitable for spatio-temporal matching. 3D PTV bases on the discretisation of particle images in image space and the following object coordinate determination. A raster based approach is the tomographic reconstruction of the volume. Here the light intensity distribution in the volume will be reconstructed. Afterwards the flow information is determined from the differences in successive 3D images. Using tomographic reconstruction techniques a higher particle density can be analysed. The developed approach bases on a slice by slice rectification of the camera images and on a following assembly of the volume. The developed models and approaches are tested at different testing facilities. These differ in size (0.5 dm³ – 20 dm³ – 130 m³) and flow velocities (0.3 m/s – 7 m/s – 0.5 m/s).

No description available.

Wood is a limited natural resource whose characteristics have been difficult to identify by advanced technology. The most expensive is a hardwood. There is a desire to optimize the production of wood products by minimizing waste and maximizing output. It could be achieved if one had capabilities to evaluate the common wood structures ― knots, rots, empty spaces and other defects. There are many nondestructive testing methods that could be applied to the evaluation of the inner quality of a log. The most successful one is an x-ray computerized tomography. This thesis covers principles of computerized tomography and image reconstruction algorithms. Testing was performed on implementations of tomographic image reconstruction algorithms using synthetic and real data. Research on an application of an x-ray computerized tomography for the analysis of wood structures was made. Inspection of glued zones in glued wooden articles was accomplished using tomographic imaging. Guidelines for the creation of a wood specialized x-ray computerized tomograph were given.

No description available.

In the BATHOLITHSonland seismic project, a refraction - wide-angle reflection survey was shot in 2009 across the Coast Mountains and Interior Plateau of central British Columbia. Part of the seismic profile crossed the Nechako Basin, a Jurassic-Cretaceous basin with potential for hydrocarbons within sedimentary rocks that underlie widespread volcanics. Along this 205-km-long line segment, eight explosive shots averaging 750 kg were fired and recorded on 980 seismometers. Forward and inverse modelling of the traveltime data were conducted with two independent methods: ray-tracing based modelling of first and secondary arrivals, and a higher resolution wavefront-based first-arrival seismic tomography. Gravity modelling was utilized as a means of evaluating the density structure corresponding to the final velocity model. Material with velocities less than 5.0 km/s is interpreted as sedimentary rocks of the Nechako Basin, while velocities from 5.0-6.0 km/s may correspond to interlayered sediments and volcanics. The greatest thickness of sedimentary rocks in the basin is found in the central 110 km of the profile. Two sub-basins were identified in this region, with widths of 20-50 km and maximum sedimentary depths of 2.5 km and 3.3 km. Such features are well-defined in the velocity model, since resolution tests indicate that features with widths greater than ~13 km are reliable. Beneath the sedimentary rocks, seismic velocities increase more slowly with depth – from 6.0 km/s just below the basin to 6.3 km/s at ~17 km depth, and then to 6.8-7.0 km/s at the base of the crust. The Moho is interpreted at a depth of 33.5-35 km along the profile, and mantle velocities are high at 8.05-8.10 km/s.